Certificate Management Protocol (CMP, RFC 4210) extension to OpenSSL
Also includes CRMF (RFC 4211) and HTTP transfer (RFC 6712).
Adds the CMP and CRMF API to libcrypto and the "cmp" app to the CLI.
Adds extensive documentation and tests.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/11300)
We use the SHA256 digest of the ticket as a "fake" session id. We should
ensure that the SHA256 implementation is fetched from the appropriate
provider.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/11356)
The server-side ChangeCipherState processing stores the new cipher
in the SSL_SESSION object, so that the new state can be used if
this session gets resumed. However, writing to the session is only
thread-safe for initial handshakes, as at other times the session
object may be in a shared cache and in use by another thread at the
same time. Reflect this invariant in the code by only writing to
s->session->cipher when it is currently NULL (we do not cache sessions
with no cipher). The code prior to this change would never actually
change the (non-NULL) cipher value in a session object, since our
server enforces that (pre-TLS-1.3) resumptions use the exact same
cipher as the initial connection, and non-abbreviated renegotiations
have produced a new session object before we get to this point.
Regardless, include logic to detect such a condition and abort the
handshake if it occurs, to avoid any risk of inadvertently using
the wrong cipher on a connection.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/10943)
Certificate Management Protocol (CMP, RFC 4210) extension to OpenSSL
Also includes CRMF (RFC 4211) and HTTP transfer (RFC 6712).
Adds the CMP and CRMF API to libcrypto and the "cmp" app to the CLI.
Adds extensive documentation and tests.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/11142)
At the moment we only provider support for these algorithms in the default
provider. These algorithms only support "one shot" EVP_DigestSign() and
EVP_DigestVerify() as per the existing libcrypto versions.
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/11261)
Previously, the initialization was done immediately in RAND_DRBG_set(),
which is also called in RAND_DRBG_uninstantiate().
This made it difficult for the FIPS DRBG self test to verify that the
internal state had been zeroized, because it had the side effect that
the drbg->data structure was reinitialized immediately.
To solve the problem, RAND_DRBG_set() has been split in two parts
static int rand_drbg_set(RAND_DRBG *drbg, int type, unsigned int flags);
static int rand_drbg_init_method(RAND_DRBG *drbg);
and only the first part is called from RAND_DRBG_uninstantiate().
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/11111)
This includes legacy PSS controls to params conversion, and an attempt
to generalise the parameter names when they are suitable for more than
one operation.
Also added crypto/rsa/rsa_aid.c, containing proper AlgorithmIdentifiers
for known RSA+hash function combinations.
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/10557)
add CMP message validation and related tests; while doing so:
* add ERR_add_error_mem_bio() to crypto/err/err_prn.c
* move ossl_cmp_add_error_txt() as ERR_add_error_txt() to crypto/err/err_prn.c
* add X509_STORE_CTX_print_verify_cb() to crypto/x509/t_x509.c,
adding internally x509_print_ex_brief(), print_certs(), and print_store_certs()
* move {ossl_cmp_,}X509_STORE_get1_certs() to crypto/x509/x509_lu.c
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
(Merged from https://github.com/openssl/openssl/pull/10620)
The new client has become an independent libcrpyto module in crypto/http/ and
* can handle any types of requests and responses (ASN.1-encoded and plain)
* does not include potentially busy loops when waiting for responses but
* makes use of a new timeout mechanism integrated with socket-based BIO
* supports the use of HTTP proxies and TLS, including HTTPS over proxies
* supports HTTP redirection via codes 301 and 302 for GET requests
* returns more useful diagnostics in various error situations
Also adapts - and strongly simplifies - hitherto uses of HTTP in crypto/ocsp/,
crypto/x509/x_all.c, apps/lib/apps.c, and apps/{ocsp,s_client,s_server}.c
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/10667)
Because the libcrypto code has relinquished control of exact words to
express padding mode choices, we re-implement them in the appropriate
provider implementation.
For the sake of legacy controls, we maintain support for the numeric
form of the padding mode, but leave that support otherwise undeclared.
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/10947)
If we hit an EOF while reading in libssl then we will report an error
back to the application (SSL_ERROR_SYSCALL) but errno will be 0. We add
an error to the stack (which means we instead return SSL_ERROR_SSL) and
therefore give a hint as to what went wrong.
Contains a partial fix for #10880
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/10907)
RAND_get_rand_method() can return a NULL method pointer in the case of a
malloc failure, so don't dereference it without a check.
Reported-by: Zu-Ming Jiang (detected by FIFUZZ)
Fixes#10480
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/10483)
In TLSv1.2 a pre-master secret value is passed from the client to the
server encrypted using RSA PKCS1 type 2 padding in a ClientKeyExchange
message. As well as the normal formatting rules for RSA PKCA1 type 2
padding TLS imposes some additional rules about what constitutes a well
formed key. Specifically it must be exactly the right length and
encode the TLS version originally requested by the client (as opposed to
the actual negotiated version) in its first two bytes.
All of these checks need to be done in constant time and, if they fail,
then the TLS implementation is supposed to continue anyway with a random
key (and therefore the connection will fail later on). This avoids
padding oracle type attacks.
This commit implements this within the RSA padding code so that we keep
all the constant time padding logic in one place. A later commit will
remove it from libssl.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/10411)
To support generic output of public keys wrapped in a X509_PUBKEY,
additional PEM and i2d/d2i routines are added for that type.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/10394)
The following public functions is added:
- OSSL_SERIALIZER_CTX_new_by_EVP_PKEY()
- OSSL_SERIALIZER_CTX_set_cipher()
- OSSL_SERIALIZER_CTX_set_passphrase()
- OSSL_SERIALIZER_CTX_set_passphrase_cb()
- OSSL_SERIALIZER_CTX_set_passphrase_ui()
OSSL_SERIALIZER_CTX_new_by_EVP_PKEY() selects a suitable serializer
for the given EVP_PKEY, and sets up the OSSL_SERIALIZER_CTX to
function together with OSSL_SERIALIZER_to_bio() and
OSSL_SERIALIZER_to_fp().
OSSL_SERIALIZER_CTX_set_cipher() indicates what cipher should be used
to produce an encrypted serialization of the EVP_PKEY. This is passed
directly to the provider using OSSL_SERIALIZER_CTX_set_params().
OSSL_SERIALIZER_CTX_set_passphrase() can be used to set a pass phrase
to be used for the encryption. This is passed directly to the
provider using OSSL_SERIALIZER_CTX_set_params().
OSSL_SERIALIZER_CTX_set_passphrase_cb() and
OSSL_SERIALIZER_CTX_set_passphrase_ui() sets up a callback to be used
to prompt for a passphrase. This is stored in the context, and is
called via an internal intermediary at the time of serialization.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/10394)
Serialization is needed to be able to take a provider object (such as
the provider side key data) and output it in PEM form, DER form, text
form (for display), and possibly other future forms (XML? JSON? JWK?)
The idea is that a serializer should be able to handle objects it has
intimate knowledge of, as well as object data in OSSL_PARAM form. The
latter will allow libcrypto to serialize some object with a different
provider than the one holding the data, if exporting of that data is
allowed and there is a serializer that can handle it.
We will provide serializers for the types of objects we know about,
which should be useful together with any other provider that provides
implementations of the same type of object.
Serializers are selected by method name and a couple of additional
properties:
- format used to tell what format the output should be in.
Possibilities could include "format=text",
"format=pem", "format=der", "format=pem-pkcs1"
(traditional), "format=der-pkcs1" (traditional)
- type used to tell exactly what type of data should be
output, for example "type=public" (the public part of
a key), "type=private" (the private part of a key),
"type=domainparams" (domain parameters).
This also adds a passphrase callback function type,
OSSL_PASSPHRASE_CALLBACK, which is a bit like OSSL_CALLBACK, but it
takes a few extra arguments to place the result in.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/10394)
This was originally the private add_names_to_namemap() in
crypto/evp/evp_fetch.c, but made more generally useful.
To make for more consistent function naming, ossl_namemap_add() and
ossl_namemap_add_n() are renamed to ossl_namemap_add_name() and
ossl_namemap_add_name_n().
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/10394)
The function OPENSSL_buf2hexstr() can return NULL if it fails to allocate
memory so the callers should check its return value.
Fixes#10525
Reported-by: Ziyang Li (@Liby99)
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/10526)
Currently added pragma:
.pragma dollarid:on
This allows dollar signs to be a keyword character unless it's
followed by a opening brace or parenthesis.
Fixes#8207
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8882)
Because KDF errors are deprecated and only conserved for backward
compatibilty, we must make sure that they remain untouched. A simple
way to signal that is by modifying crypto/err/openssl.ec and replace
the main header file (include/openssl/kdf.h in this case) with 'NONE',
while retaining the error table file (crypto/kdf/kdf_err.c).
util/mkerr.pl is modified to silently ignore anything surrounding a
conserved lib when such a .ec line is found.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/10368)
Previous macros suggested that from 3.0, we're only allowed to
deprecate things at a major version. However, there's no policy
stating this, but there is for removal, saying that to remove
something, it must have been deprecated for 5 years, and that removal
can only happen at a major version.
Meanwhile, the semantic versioning rule is that deprecation should
trigger a MINOR version update, which is reflected in the macro names
as of this change.
Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/10364)
This is a wrapper around OSSL_STORE.
This also adds necessary support functions:
- X509_STORE_load_file
- X509_STORE_load_path
- X509_STORE_load_store
- SSL_add_store_cert_subjects_to_stack
- SSL_CTX_set_default_verify_store
- SSL_CTX_load_verify_file
- SSL_CTX_load_verify_dir
- SSL_CTX_load_verify_store
and deprecates X509_STORE_load_locations and SSL_CTX_load_verify_locations,
as they aren't extensible.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8442)
Signed-off-by: Simo Sorce <simo@redhat.com>
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9949)
Implement SP800-108 section 5.2 with CMAC support. As a side effect,
enable 5.1 with CMAC and 5.2 with HMAC. Add test vectors from RFC 6803.
Add OSSL_KDF_PARAM_CIPHER and PROV_R_INVALID_SEED_LENGTH.
Signed-off-by: Robbie Harwood <rharwood@redhat.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/10143)
The end up in providers/common/include/prov/.
All inclusions are adjusted accordingly.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/10088)
Also added blanks lines after declarations in a couple of places.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9916)
This modifies the treatment of algorithm name strings to allow
multiple names separated with colons.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/8985)
Unset data defaults to the empty string ("") or 0.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9948)
Apart from public and internal header files, there is a third type called
local header files, which are located next to source files in the source
directory. Currently, they have different suffixes like
'*_lcl.h', '*_local.h', or '*_int.h'
This commit changes the different suffixes to '*_local.h' uniformly.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9333)
Currently, there are two different directories which contain internal
header files of libcrypto which are meant to be shared internally:
While header files in 'include/internal' are intended to be shared
between libcrypto and libssl, the files in 'crypto/include/internal'
are intended to be shared inside libcrypto only.
To make things complicated, the include search path is set up in such
a way that the directive #include "internal/file.h" could refer to
a file in either of these two directoroes. This makes it necessary
in some cases to add a '_int.h' suffix to some files to resolve this
ambiguity:
#include "internal/file.h" # located in 'include/internal'
#include "internal/file_int.h" # located in 'crypto/include/internal'
This commit moves the private crypto headers from
'crypto/include/internal' to 'include/crypto'
As a result, the include directives become unambiguous
#include "internal/file.h" # located in 'include/internal'
#include "crypto/file.h" # located in 'include/crypto'
hence the superfluous '_int.h' suffixes can be stripped.
The files 'store_int.h' and 'store.h' need to be treated specially;
they are joined into a single file.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9333)
Implement SP800-108 section 5.1 with HMAC intended for use in Kerberos.
Add test vectors from RFC 8009.
Adds error codes PROV_R_INVALID_MAC and PROV_R_MISSING_MAC.
Signed-off-by: Robbie Harwood <rharwood@redhat.com>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9924)
Also includes CRMF (RFC 4211) and HTTP transfer (RFC 6712)
CMP and CRMF API is added to libcrypto, and the "cmp" app to the openssl CLI.
Adds extensive man pages and tests. Integration into build scripts.
Incremental pull request based on OpenSSL commit 8869ad4a39 of 2019-04-02
4th chunk: CMP context/parameters and utilities
in crypto/cmp/cmp_ctx.c, crypto/cmp/cmp_util.c, and related files
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9107)
using PCC and KDSA instructions.
Signed-off-by: Patrick Steuer <patrick.steuer@de.ibm.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/10004)
Internally, we still need this function, so we make it internal and
then add a new ERR_get_state() that simply calls the internal variant,
unless it's "removed" by configuration.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9462)
ERR_print_errors_cb() used functionality that isn't suitable any more,
as that functionality couldn't integrate the error record function
name strings. We therefore refactor it a bit to use better adapted
methods.
Fixes#9756
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9756)
ERR_func_error_string() essentially returns NULL, and since all
function codes are now removed for all intents and purposes, this
function has fallen out of use and cannot be modified to suit the
data, since its only function is to interpret an error code.
To compensate for the loss of error code, we instead provide new
functions that extracts the function name strings from an error
record:
- ERR_get_error_func()
- ERR_peek_error_func()
- ERR_peek_last_error_func()
Similarly, the once all encompasing functions
ERR_peek_last_error_line_data(), ERR_peek_error_line_data() and
ERR_get_error_line_data() lack the capability of getting the function
name string, so we deprecate those and add these functions to replace
them:
- ERR_get_error_all()
- ERR_peek_error_all()
- ERR_peek_last_error_all()
Finally, we adjust a few lines of code that used the now deprecated
functions.
Fixes#9756
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9756)
KEYMGMT methods were attached to other methods after those were fully
created and registered, thereby creating a potential data race, if two
threads tried to create the exact same method at the same time.
Instead of this, we change the method creating function to take an
extra data parameter, passed all the way from the public fetching
function. In the case of EVP_KEYEXCH, we pass all the necessary data
that evp_keyexch_from_dispatch() needs to be able to fetch the
appropriate KEYMGMT method on the fly.
Fixes#9592
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9678)
Moved the relevant ciphers into default and restructed headers to allow the move.
This removed most of the cases of #ifdef NO_XXX (which are now specified in build.info)
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9482)
Add Cleanups for gcm - based on the changes to ccm.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Patrick Steuer <patrick.steuer@de.ibm.com>
(Merged from https://github.com/openssl/openssl/pull/9280)
Recently, we added dispatched functions to get parameter descriptions,
and those for operation context parameters ended up being called
something_gettable_ctx_params and something_settable_ctx_params.
The corresponding dispatched functions to actually perform parameter
transfers were previously called something_ctx_get_params and
something_ctx_set_params, which doesn't quite match, so we rename them
to something_get_ctx_params and something_set_ctx_params.
An argument in favor of this name change is English, where you'd
rather say something like "set the context parameters".
This only change the libcrypto <-> provider interface.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/9612)
BLAKE2 MACs came with a set of new reason codes. Those talking about
lengths are consistently called PROV_R_INVALID_FOO_LENGTH, for any
name FOO. The cipher messages were briefer. In the interest of
having more humanly readable messages, we adjust the reasons used by
the ciphers (that's just IV length and key length).
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/8877)
Instead of using evp_keccak_kmac128() and evp_keccak_kmac256(), we refer
to the hash implementation by name, and fetch it, which should get us the
implementation from providers/common/digests/sha3_prov.c.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/8877)
This also moves the remaining parts of BLAKE2 digests to the default
provider, and removes the legacy EVP implementation.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/8877)
for NIST P-256, P-384 and P-521 using KDSA instruction.
Signed-off-by: Patrick Steuer <patrick.steuer@de.ibm.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/9348)
which are already enabled for ECDH.
Signed-off-by: Patrick Steuer <patrick.steuer@de.ibm.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/9348)
They do the same thing as OPENSSL_hexstr2buf() and OPENSSL_buf2hexstr(),
except they take a result buffer from the caller.
We take the opportunity to break out the documentation of the hex to /
from buffer conversion routines from the OPENSSL_malloc() file to its
own file. These routines aren't memory allocation routines per se.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/9303)
The code has been modularized so that it can be shared by algorithms.
A fixed size IV is now used instead of being allocated.
The IV is not set into the low level struct now until the update (it uses an
iv_state for this purpose).
Hardware specific methods have been added to a PROV_GCM_HW object.
The S390 code has been changed to just contain methods that can be accessed in
a modular way. There are equivalent generic methods also for the other
platforms.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Patrick Steuer <patrick.steuer@de.ibm.com>
(Merged from https://github.com/openssl/openssl/pull/9231)
In ERR_add_error_vdata(), the size of err_data had 1 added to it in
some spots, which could lead to buffer overflow.
In ERR_vset_error(), ERR_MAX_DATA_SIZE was used instead of buf_size in
the BIO_vsnprintf() call, which would lead to a buffer overflow if
such a large buffer couldn't be allocated.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/9491)
Also added EVP_CTRL_RET_UNSUPPORTED define (so magic numbers can be removed)
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9464)
CAdES : rework CAdES signing API.
Make it private, as it is unused outside library bounds.
Fix varous doc-nits.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
The new building block are ERR_new(), ERR_set_debug(),
ERR_set_error(), ERR_vset_error(), which allocate a new error record
and set the diverse data in them. They are designed in such a way
that it's reasonably easy to create macros that use all of them but
then rely completely on the function signature of ERR_set_error() or
ERR_vset_error().
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/9452)
The useful inner macros are now static inline functions. That will
make them easier to debug in the future.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/9452)
To deallocate the err_data field and then allocating it again might be
a waste of processing, but may also be a source of errors when memory
is scarce. While we normally tolerate that, the ERR sub-system is an
exception and we need to pay closer attention to how we handle memory.
This adds a new err_data flag, ERR_TXT_IGNORE, which means that even
if there is err_data memory allocated, its contents should be ignored.
Deallocation of the err_data field is much more selective, aand should
only happen when ERR_free_state() is called.
Fixes#9458
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/9459)
The biggest part in this was to move the key->param builder from EVP
to the DH ASN.1 method, and to implement the KEYMGMT support in the
provider DH.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9394)
Change SYSerr to have the function name; remove SYS_F_xxx defines
Add a test and documentation.
Use get_last_socket_err, which removes some ifdef's in OpenSSL code.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9072)
A fuller implementation of PARAMS_TEMPLATE as per #9266 but renamed.
This introduces a statis data type which can be used to constructor a
description of a parameter array. It can then be converted into a OSSL_PARAM
array and the allocated storage freed by a single call to OPENSSL_free.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9305)
We introduce a new EVP_KEYEXCH type to represent key exchange algorithms
and refactor the existing code to use it where available.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/9266)
Deprecate all xxx_F_ defines.
Removed some places that tested for a specific function.
Use empty field for the function names in output.
Update documentation.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9058)
The FIPS provider does not have a default OPENSSL_CTX so, where
necessary, we need to ensure we can always access an explicit
OPENSSL_CTX. We remove functions from the FIPS provider that use
the default OPENSSL_CTX, and fixup some places which were using
those removed functions.
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/9310)
Move the KDF code for CMS DH key agreement into an EVP_KDF object.
There are 2 specifications for X9.42 KDF. This implementation uses DER for
otherinfo which embeds the KDF loop counter inside the DER object.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/8898)
We provider internal versions of RAND_bytes() and RAND_priv_bytes() which
have the addition of taking an OPENSSL_CTX as a parameter.
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/9193)
CLA: trivial
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/9288)
The maximum key length for rc5 is 2040 bits so we should not attempt to
use keys longer than this.
Issue found by OSS-Fuzz and Guido Vranken.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/8834)
SM2 certificate signing request can be created and signed by OpenSSL
now, both in library and apps.
Documentation and test cases are added.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/9085)
Remove the union that effectively cast thread IDs to long integers before
display and instead print a hex dump of the entire object.
Refer #9191
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9194)
If a provider gets unloaded then any thread stop handlers that it had
registered will be left hanging. We should clean them up before tearing
down the provider.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9186)
The "add error data" functions now append to the current error.
Add a test for this.
Cleanup some of the ERR_put functions.
In the FIPS module, always append "(in the FIPS module)" to any errors.
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9181)
The RAND code needs to know about threads stopping in order to cleanup
local thread data. Therefore we add a callback for libcrypto to tell
providers about such events.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9040)
In later commits this will allow providers to subscribe to thread stop
events. We will need this in the FIPS module. We also make thread stop
handling OPENSSL_CTX aware (different OPENSSL_CTXs may have different
thread local data that needs cleaning up).
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9040)
These variants of BN_CTX_new() and BN_CTX_secure_new() enable passing
an OPENSSL_CTX so that we can access this where needed throughout the
BIGNUM sub library.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/9130)
The existing code used PKCS5 specifications.
SP800-132 adds the following additional constraints for:
- the range of the key length.
- the minimum iteration count (1000 recommended).
- salt length (at least 128 bits).
These additional constraints may cause errors (in scrypt, and
some PKCS5 related test vectors). To disable the new
constraints use the new ctrl string "pkcs5".
For backwards compatability, the checks are only enabled by
default for fips mode.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8868)
The 4 kB SPACE_SYS_STR_REASONS in crypto/err/err.c isn't enough for some locales.
The Russian locales consume 6856 bytes, Ukrainian even 7000.
build_SYS_str_reasons() contains an overflow check:
if (cnt > sizeof(strerror_pool))
cnt = sizeof(strerror_pool);
But since commit 9f15e5b911 it no longer
works as cnt is incremented once more after the condition.
cnt greater than sizeof(strerror_pool) results in an unbounded
OPENSSL_strlcpy() in openssl_strerror_r(), eventually causing a crash.
When the first received error string was empty or contained only
spaces, cur would move in front of the start of the strerror_pool.
Also don't call openssl_strerror_r when the pool is full.
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/8966)
Fixes#8923
Found using the openssl cms -resign option.
This uses an alternate path to do the signing which was not adding the required signed attribute
content type. The content type attribute should always exist since it is required is there are
any signed attributes.
As the signing time attribute is always added in code, the content type attribute is also required.
The CMS_si_check_attributes() method adds validity checks for signed and unsigned attributes
e.g. The message digest attribute is a signed attribute that must exist if any signed attributes
exist, it cannot be an unsigned attribute and there must only be one instance containing a single
value.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8944)
Also includes CRMF (RFC 4211) and HTTP transfer (RFC 6712)
CMP and CRMF API is added to libcrypto, and the "cmp" app to the openssl CLI.
Adds extensive man pages and tests. Integration into build scripts.
Incremental pull request based on OpenSSL commit 1362190b1b of 2018-09-26
3rd chunk: CMP ASN.1 structures (in crypto/cmp/cmp_asn.c) and related files
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8669)
This has been long overdue.
Note that this does not join the X509 and X509V3 error modules, that
will be too many macro changes at this stage.
Fixes#8919
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/8925)
Convert EVP_PKEY Parameters to/from binary.
This wraps the low level i2d/d2i calls for DH,DSA and EC key parameters
in a similar way to Public and Private Keys.
The API's can be used by applications (including openssl apps) that only
want to use EVP_PKEY without needing to access low level key API's.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8903)
In the development of the CRMF sub-system, there seems to have been
some confusion as to what configuration option should be used.
'no-crmf' was added, but the C macro guards were using OPENSSL_NO_CMP
rather than OPENSSL_NO_CRMF...
In fact, we want 'no-cmp', but since the CRMF code is part of CMP, we
need 'no-crmf' to depend on 'no-cmp'. We do this by making 'crmf' a
silent "option" that get affected by 'cmp' by way of %disable_cascades.
This allows options to be "aliases" for a set of other ones, silent or
not.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8897)
X963 KDF is used for CMS ec keyagree Recipient Info.
The X963 KDF that is used by CMS EC Key Agreement has been moved
into a EVP_KDF object. This KDF is almost identical to the the SSKDF
hash variant, so it has been implemented inside the SSKDF code with
its own method table.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/8902)
This commit adds the SSL_sendfile call, which allows KTLS sockets to
transmit file using zero-copy semantics.
Signed-off-by: Boris Pismenny <borisp@mellanox.com>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8727)
Various core and property related code files used global data. We should
store all of that in an OPENSSL_CTX instead.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8857)
EVP_MD_fetch() can be given a property query string. However, there
are cases when it won't, for example in implicit fetches. Therefore,
we also need a way to set a global property query string to be used in
all subsequent fetches. This also applies to all future algorithm
fetching functions.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/8681)
The three macros EVP_F_AESNI_XTS_INIT_KEY, EVP_F_AES_T4_XTS_INIT_KEY
and EVP_F_AES_XTS_INIT_KEY are affected.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/8682)
than the update call. The means an earlier error return at the cost of some
duplicated code.
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/8625)
This configuration module supports a configuration structure pretty
much like the engine configuration module, i.e. something like this:
openssl_conf = openssl_init
[openssl_init]
providers = provider_section
[provider_section]
# Configure the provider named "foo"
foo = foo_section
# Configure the provider named "bar"
bar = bar_section
[foo_section]
# Override name given in the provider section
identity = myfoo
# The exact path of the module. This is platform specific
module_path = /opt/openssl/modules/foo.so
# Whether it should be automatically activated. Value is unimportant
activate = whatever
# Anything else goes as well, and becomes parameters that the
# provider can get
what = 1
# sub-sections will be followed as well
ever = ever_section
[ever_section]
cookie = monster
All the configurations in a provider section and its sub-sections
become parameters for the provider to get, i.e. the "foo" provider
will be able to get values for the following keys (with associated
values shown):
identity => myfoo
module_path => /opt/openssl/modules/foo.so
activate => whatever
what => 1
ever.cookie => monster
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/8549)
Provider parameters are parameters set by the core that the provider
can retrieve. The primary use it to support making OpenSSL
configuration data available to the provider.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/8549)
Limit the number of AES blocks in a data unit to 2^20 or less.
This corresponds to the mandates in IEEE Std 1619-2018 and NIST SP 800-38E.
Note: that this is a change from IEEE Std 1619-2007 which only recommended
this limit.
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/8627)
OpenSSL will come with a set of well known providers, some of which
need to be accessible from the start. These are typically built in
providers, or providers that will work as fallbacks.
We do this when creating a new provider store, which means that this
will happen in every library context, regardless of if it's the global
default one, or an explicitely created one.
We keep the data about the known providers we want to make accessible
this way in crypto/provider_predefined.h, which may become generated.
For now, though, we make it simple and edited manually.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8480)
To ensure that old applications aren't left without any provider, and
at the same time not forcing any default provider on applications that
know how to deal with them, we device the concept of fallback
providers, which are automatically activated if no other provider is
already activated.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8480)
in INSTALL, Configure, crypto/build.info, include/openssl/crmferr.h,
crypto/err/, include/openssl/err.h, and (to be updated:) util/libcrypto.num
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7646)
Adding a provider means creating an internal provier object and adding
it to the store. This allows the addition of built in providers, be it
in the OpenSSL libraries or in any application.
"Loading" a provider is defined broadly. A built in provider is already
"loaded" in essence and only needs activating, while a provider in a
dynamically loadable module requires actually loading the module itself.
In this API, "loading" a provider does both.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8287)
The OSSL_PROVIDER is the core object involved in loading a provider
module, initialize a provider and do the initial communication of
provider wide and core wide dispatch tables.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8287)
SSH's KDF is defined in RFC 4253 in Section 7.2
Signed-off-by: Simo Sorce <simo@redhat.com>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7290)
Properties are a sequence of comma separated name=value pairs. A name
without a corresponding value is assumed to be a Boolean and have the
true value 'yes'. Values are either strings or numbers. Strings can be
quoted either _"_ or _'_ or unquoted (with restrictions). There are no
escape characters inside strings. Number are either decimal digits or
'0x' followed by hexidecimal digits. Numbers are represented internally
as signed sixty four bit values.
Queries on properties are a sequence comma separated conditional tests.
These take the form of name=value (equality test), name!=value (inequality
test) or name (Boolean test for truth). Queries can be parsed, compared
against a definition or merged pairwise.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8224)
This commit adds a dedicated function in `EC_METHOD` to access a modular
field inversion implementation suitable for the specifics of the
implemented curve, featuring SCA countermeasures.
The new pointer is defined as:
`int (*field_inv)(const EC_GROUP*, BIGNUM *r, const BIGNUM *a, BN_CTX*)`
and computes the multiplicative inverse of `a` in the underlying field,
storing the result in `r`.
Three implementations are included, each including specific SCA
countermeasures:
- `ec_GFp_simple_field_inv()`, featuring SCA hardening through
blinding.
- `ec_GFp_mont_field_inv()`, featuring SCA hardening through Fermat's
Little Theorem (FLT) inversion.
- `ec_GF2m_simple_field_inv()`, that uses `BN_GF2m_mod_inv()` which
already features SCA hardening through blinding.
From a security point of view, this also helps addressing a leakage
previously affecting conversions from projective to affine coordinates.
This commit also adds a new error reason code (i.e.,
`EC_R_CANNOT_INVERT`) to improve consistency between the three
implementations as all of them could fail for the same reason but
through different code paths resulting in inconsistent error stack
states.
Co-authored-by: Nicola Tuveri <nic.tuv@gmail.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Nicola Tuveri <nic.tuv@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/8254)
Changed PKEY/KDF API to call the new API.
Added wrappers for PKCS5_PBKDF2_HMAC() and EVP_PBE_scrypt() to call the new EVP KDF APIs.
Documentation updated.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6674)
Signed-off-by: Antoine Salon <asalon@vmware.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7726)
Signed-off-by: Antoine Salon <asalon@vmware.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7726)
If the call the ERR_set_error_data() in ERR_add_error_vdata() fails then
a mem leak can occur. This commit checks that we successfully added the
error data, and if not frees the buffer.
Fixes#8085
Reviewed-by: Paul Yang <yang.yang@baishancloud.com>
(Merged from https://github.com/openssl/openssl/pull/8105)
A CAdES Basic Electronic Signature (CAdES-BES) contains, among other
specifications, a collection of Signing Certificate reference attributes,
stored in the signedData ether as ESS signing-certificate or as
ESS signing-certificate-v2. These are described in detail in Section 5.7.2
of RFC 5126 - CMS Advanced Electronic Signatures (CAdES).
This patch adds support for adding ESS signing-certificate[-v2] attributes
to CMS signedData. Although it implements only a small part of the RFC, it
is sufficient many cases to enable the `openssl cms` app to create signatures
which comply with legal requirements of some European States (e.g Italy).
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/7893)
1. In addition to overriding the default application name,
one can now also override the configuration file name
and flags passed to CONF_modules_load_file().
2. By default we still keep going when configuration file
processing fails. But, applications that want to be strict
about initialization errors can now make explicit flag
choices via non-null OPENSSL_INIT_SETTINGS that omit the
CONF_MFLAGS_IGNORE_RETURN_CODES flag (which had so far been
both undocumented and unused).
3. In OPENSSL_init_ssl() do not request OPENSSL_INIT_LOAD_CONFIG
if the options already include OPENSSL_INIT_NO_LOAD_CONFIG.
4. Don't set up atexit() handlers when called with INIT_BASE_ONLY.
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7986)
It turns out that intialization may change the error number, so we
need to preserve the system error number in functions where
initialization is called for.
These are ERR_get_state() and err_shelve_state()
Fixes#7897
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7902)
This function can end up being called during ERR_get_error() if we are
initialising. ERR_get_error() must preserve errno since it gets called via
SSL_get_error(). If that function returns SSL_ERROR_SYSCALL then you are
supposed to inspect errno.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7680)
Previously, the API version limit was indicated with a numeric version
number. This was "natural" in the pre-3.0.0 because the version was
this simple number.
With 3.0.0, the version is divided into three separate numbers, and
it's only the major number that counts, but we still need to be able
to support pre-3.0.0 version limits.
Therefore, we allow OPENSSL_API_COMPAT to be defined with a pre-3.0.0
style numeric version number or with a simple major number, i.e. can
be defined like this for any application:
-D OPENSSL_API_COMPAT=0x10100000L
-D OPENSSL_API_COMPAT=3
Since the pre-3.0.0 numerical version numbers are high, it's easy to
distinguish between a simple major number and a pre-3.0.0 numerical
version number and to thereby support both forms at the same time.
Internally, we define the following macros depending on the value of
OPENSSL_API_COMPAT:
OPENSSL_API_0_9_8
OPENSSL_API_1_0_0
OPENSSL_API_1_1_0
OPENSSL_API_3
They indicate that functions marked for deprecation in the
corresponding major release shall not be built if defined.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7724)
Expected usage pattern is to unconditionally set error and then
wipe it if there was no actual error.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
It turns out that on VMS, strerror() returns messages with added
spaces at the end.
We wouldn't had noticed if it wasn't for perl trimming those spaces
off for its own sake and thereby having test/recipes/02-test_errstr.t
fail on VMS.
The safe fix is to do the same trimming ourselves.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/7701)
We stored copies of the system error texts in a fixed line size array,
which is a huge waste. Instead, use a static memory pool and pack all
the string in there. The wasted space at the end, if any, gives us
some leeway for longer strings than we have measured so far.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7681)
Remove GMAC demo program because it has been superceded by the EVP MAC one
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7548)
The MAC EVP_PKEY implementations are currently implemented for each
MAC. However, with the EVP_MAC API, only one such implementation is
needed.
This implementation takes into account the differences between HMAC
and CMAC implementations, and observes that all other current MAC
implementations seem to follow the HMAC model.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/7393)
We currently implement EVP MAC methods as EVP_PKEY methods. This
change creates a separate EVP API for MACs, to replace the current
EVP_PKEY ones.
A note about this EVP API and how it interfaces with underlying MAC
implementations:
Other EVP APIs pass the EVP API context down to implementations, and
it can be observed that the implementations use the pointer to their
own private data almost exclusively. The EVP_MAC API deviates from
that pattern by passing the pointer to the implementation's private
data directly, and thereby deny the implementations access to the
EVP_MAC context structure. This change is made to provide a clearer
separation between the EVP library itself and the implementations of
its supported algorithm classes.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/7393)
In pull request #4328 the seeding of the DRBG via RAND_add()/RAND_seed()
was implemented by buffering the data in a random pool where it is
picked up later by the rand_drbg_get_entropy() callback. This buffer
was limited to the size of 4096 bytes.
When a larger input was added via RAND_add() or RAND_seed() to the DRBG,
the reseeding failed, but the error returned by the DRBG was ignored
by the two calling functions, which both don't return an error code.
As a consequence, the data provided by the application was effectively
ignored.
This commit fixes the problem by a more efficient implementation which
does not copy the data in memory and by raising the buffer the size limit
to INT32_MAX (2 gigabytes). This is less than the NIST limit of 2^35 bits
but it was chosen intentionally to avoid platform dependent problems
like integer sizes and/or signed/unsigned conversion.
Additionally, the DRBG is now less permissive on errors: In addition to
pushing a message to the openssl error stack, it enters the error state,
which forces a reinstantiation on next call.
Thanks go to Dr. Falko Strenzke for reporting this issue to the
openssl-security mailing list. After internal discussion the issue
has been categorized as not being security relevant, because the DRBG
reseeds automatically and is fully functional even without additional
randomness provided by the application.
Fixes#7381
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/7382)
limit is ever reached.
This is a FIPS 140-2 requirement from IG A.5 "Key/IV Pair Uniqueness
Requirements from SP 800-38D".
Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7129)
zero-length ID is allowed, but it's not allowed to skip the ID.
Fixes: #6534
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7113)
Since 0.9.7, all i2d_ functions were documented to allocate an output
buffer if the user didn't provide one, under these conditions (from
the 1.0.2 documentation):
For OpenSSL 0.9.7 and later if B<*out> is B<NULL> memory will be
allocated for a buffer and the encoded data written to it. In this
case B<*out> is not incremented and it points to the start of the
data just written.
i2d_ASN1_OBJECT was found not to do this, and would crash if a NULL
output buffer was provided.
Fixes#6914
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/6918)
Ensure that the certificate required alert actually gets sent (and doesn't
get translated into handshake failure in TLSv1.3).
Ensure that proper reason codes are given for the new TLSv1.3 alerts.
Remove an out of date macro for TLS13_AD_END_OF_EARLY_DATA. This is a left
over from an earlier TLSv1.3 draft that is no longer used.
Fixes#6804
Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6809)
Some EC functions exist in *_GFp and *_GF2m forms, in spite of the
implementations between the two curve types being identical. This
commit provides equivalent generic functions with the *_GFp and *_GF2m
forms just calling the generic functions.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6815)
The spec says that a client MUST set legacy_version to TLSv1.2, and
requires servers to verify that it isn't SSLv3.
Fixes#6600
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6747)
By default `ec_scalar_mul_ladder` (which uses the Lopez-Dahab ladder
implementation) is used only for (k * Generator) or (k * VariablePoint).
ECDSA verification uses (a * Generator + b * VariablePoint): this commit
forces the use of `ec_scalar_mul_ladder` also for the ECDSA verification
path, while using the default wNAF implementation for any other case.
With this commit `ec_scalar_mul_ladder` loses the static attribute, and
is added to ec_lcl.h so EC_METHODs can directly use it.
While working on a new custom EC_POINTs_mul implementation, I realized
that many checks (e.g. all the points being compatible with the given
EC_GROUP, creating a temporary BN_CTX if `ctx == NULL`, check for the
corner case `scalar == NULL && num == 0`) were duplicated again and
again in every single implementation (and actually some
implementations lacked some of the tests).
I thought that it makes way more sense for those checks that are
independent from the actual implementation and should always be done, to
be moved in the EC_POINTs_mul wrapper: so this commit also includes
these changes.
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6690)
This commit uses the new ladder scaffold to implement a specialized
ladder step based on differential addition-and-doubling in mixed
Lopez-Dahab projective coordinates, modified to independently blind the
operands.
The arithmetic in `ladder_pre`, `ladder_step` and `ladder_post` is
auto generated with tooling:
- see, e.g., "Guide to ECC" Alg 3.40 for reference about the
`ladder_pre` implementation;
- see https://www.hyperelliptic.org/EFD/g12o/auto-code/shortw/xz/ladder/mladd-2003-s.op3
for the differential addition-and-doubling formulas implemented in
`ladder_step`;
- see, e.g., "Fast Multiplication on Elliptic Curves over GF(2**m)
without Precomputation" (Lopez and Dahab, CHES 1999) Appendix Alg Mxy
for the `ladder_post` implementation to recover the `(x,y)` result in
affine coordinates.
Co-authored-by: Billy Brumley <bbrumley@gmail.com>
Co-authored-by: Sohaib ul Hassan <soh.19.hassan@gmail.com>
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6690)
for specialized Montgomery ladder implementations
PR #6009 and #6070 replaced the default EC point multiplication path for
prime and binary curves with a unified Montgomery ladder implementation
with various timing attack defenses (for the common paths when a secret
scalar is feed to the point multiplication).
The newly introduced default implementation directly used
EC_POINT_add/dbl in the main loop.
The scaffolding introduced by this commit allows EC_METHODs to define a
specialized `ladder_step` function to improve performances by taking
advantage of efficient formulas for differential addition-and-doubling
and different coordinate systems.
- `ladder_pre` is executed before the main loop of the ladder: by
default it copies the input point P into S, and doubles it into R.
Specialized implementations could, e.g., use this hook to transition
to different coordinate systems before copying and doubling;
- `ladder_step` is the core of the Montgomery ladder loop: by default it
computes `S := R+S; R := 2R;`, but specific implementations could,
e.g., implement a more efficient formula for differential
addition-and-doubling;
- `ladder_post` is executed after the Montgomery ladder loop: by default
it's a noop, but specialized implementations could, e.g., use this
hook to transition back from the coordinate system used for optimizing
the differential addition-and-doubling or recover the y coordinate of
the result point.
This commit also renames `ec_mul_consttime` to `ec_scalar_mul_ladder`,
as it better corresponds to what this function does: nothing can be
truly said about the constant-timeness of the overall execution of this
function, given that the underlying operations are not necessarily
constant-time themselves.
What this implementation ensures is that the same fixed sequence of
operations is executed for each scalar multiplication (for a given
EC_GROUP), with no dependency on the value of the input scalar.
Co-authored-by: Sohaib ul Hassan <soh.19.hassan@gmail.com>
Co-authored-by: Billy Brumley <bbrumley@gmail.com>
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6690)
Fix the NULL check lack in a different way that is more compatible with
non-NULL branch. Refer #6632
Also mark and pop the error stack instead of clearing all errors when something
goes awry in CONF_get_number.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Andy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6643)
Currently if you encounter application data while waiting for a
close_notify from the peer, and you have called SSL_shutdown() then
you will get a -1 return (fatal error) and SSL_ERROR_SYSCALL from
SSL_get_error(). This isn't accurate (it should be SSL_ERROR_SSL) and
isn't persistent (you can call SSL_shutdown() again and it might then work).
We change this into a proper fatal error that is persistent.
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
Reviewed-by: Kurt Roeckx <kurt@roeckx.be>
(Merged from https://github.com/openssl/openssl/pull/6340)
Implement support for stateful TLSv1.3 tickets, and use them if
SSL_OP_NO_TICKET is set.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6563)
This commit implements coordinate blinding, i.e., it randomizes the
representative of an elliptic curve point in its equivalence class, for
prime curves implemented through EC_GFp_simple_method,
EC_GFp_mont_method, and EC_GFp_nist_method.
This commit is derived from the patch
https://marc.info/?l=openssl-dev&m=131194808413635 by Billy Brumley.
Coordinate blinding is a generally useful side-channel countermeasure
and is (mostly) free. The function itself takes a few field
multiplicationss, but is usually only necessary at the beginning of a
scalar multiplication (as implemented in the patch). When used this way,
it makes the values that variables take (i.e., field elements in an
algorithm state) unpredictable.
For instance, this mitigates chosen EC point side-channel attacks for
settings such as ECDH and EC private key decryption, for the
aforementioned curves.
For EC_METHODs using different coordinate representations this commit
does nothing, but the corresponding coordinate blinding function can be
easily added in the future to extend these changes to such curves.
Co-authored-by: Nicola Tuveri <nic.tuv@gmail.com>
Co-authored-by: Billy Brumley <bbrumley@gmail.com>
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6501)
Use EVP_PKEY_set_alias_type to access
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6443)
Only applies to algorithms that support it. Both raw private and public
keys can be obtained for X25519, Ed25519, X448, Ed448. Raw private keys
only can be obtained for HMAC, Poly1305 and SipHash
Fixes#6259
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6394)
There were a large number of error codes that were unused (probably a
copy&paste from somewhere else). Since these have never been made public
we should remove then and rebuild the error codes.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6386)
OpenSSL 1.1.0 made the X509_LOOKUP_METHOD structure opaque, so
applications that were previously able to define a custom lookup method
are not able to be ported.
This commit adds getters and setters for each of the current fields of
X509_LOOKUP_METHOD, along with getters and setters on several associated
opaque types (such as X509_LOOKUP and X509_OBJECT).
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6152)
This reverts commit a6f5b11634.
The EVP_PKEY_sign() function is intended for pre-hashed input which is
not supported by our EdDSA implementation.
See the discussion in PR 5880
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6284)
which is used for ASN1_STRING_print_ex*() and X509_NAME_print_ex*().
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6105)
