Provider parameters are parameters set by the core that the provider
can retrieve. The primary use it to support making OpenSSL
configuration data available to the provider.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/8549)
Limit the number of AES blocks in a data unit to 2^20 or less.
This corresponds to the mandates in IEEE Std 1619-2018 and NIST SP 800-38E.
Note: that this is a change from IEEE Std 1619-2007 which only recommended
this limit.
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/8627)
I turns out that this made crypto/rand/rand_win.c to never build with
BCrypt support unless the user sets _WIN32_WINNT. That wasn't the
intent.
This reverts commit cc8926ec8f.
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/8641)
Previously, the macro OPENSSL_NO_SHARED was defined of the test/p_test
module wasn't built, but the provider test programs didn't check that
macro. We rename it to OPENSSL_NO_MODULE, since that name describes
the situation more than OPENSSL_NO_SHARED does, and use it.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/8623)
While we're at it, sort out inconsistencies with the build of modules:
- not building shared libraries means not building dynamic engines.
However, other modules may still be built.
- not having DSO functionality doesn't mean not to build modules (even
though we can't use them from apps linked with libraries that are
built this way).
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/8623)
SHARED_SOURCE is reserved for products that are expected to come in
dual shared / non-shared form, i.e. the routine libraries like
libcrypto and libssl, to distinguish source that should only appear in
their shared form.
Modules are always shared, so there's no need for them to have this
type of distinction.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/8623)
Removing the option entirely would break builds unnecessarily, so
let's make it deprecated.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8632)
Add a unit-test for ktls receive side.
Change-Id: I890588681d05fba419f644f6d903be6dc83c9ed5
Signed-off-by: Boris Pismenny <borisp@mellanox.com>
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7848)
This patch adds support for the Linux TLS Rx socket option.
It completes the previous patch for TLS Tx offload.
If the socket option is successful, then the receive data-path of the TCP
socket is implemented by the kernel.
We choose to set this option at the earliest - just after CCS is complete.
Change-Id: I59741e04d89dddca7fb138e88fffcc1259b30132
Signed-off-by: Boris Pismenny <borisp@mellanox.com>
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7848)
Add support for Linux TLS Rx offload in the BIO layer.
Change-Id: I79924b25dd290a873d69f6c8d429e1f5bb2c3365
Signed-off-by: Boris Pismenny <borisp@mellanox.com>
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7848)
Introduce the infrastructure for supproting receive side Linux Kernel TLS
data-path.
Change-Id: I71864d8f9d74a701cc8b0ad5536005f3c1716c1c
Signed-off-by: Boris Pismenny <borisp@mellanox.com>
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7848)
'no-dso' is meaningless, as it doesn't get any macro defined.
Therefore, we remove all checks of OPENSSL_NO_DSO. However, there may
be some odd platforms with no DSO scheme. For those, we generate the
internal macro DSO_NONE aand use it.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/#8622)
"warning: iv not use by this cipher" -> "warning: iv not used by this cipher"
CLA: trivial
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/8608)
The output format now matches coreutils *dgst tools.
[ edited to remove trailing white space ]
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/8578)
This follows #8321 which added the SM2 certificate verification feature.
This commit adds the related docs - the newly added 2 APIs and options
in apps/verify.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/8465)
This follows #8321 which added the SM2 certificate verification feature.
This commit adds some test cases for #8321.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/8465)
It seems more intuitive to set `OPENSSL_TRACE=all` instead of
`OPENSSL_TRACE=any` to obtain trace output for all categories.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/8552)
Previously, if the openssl application was run with OPENSSL_TRACE=any,
all trace output would just show 'ANY' as the category name, which was
not very useful. To get the correct category name printed in the trace
output, the openssl application now registers separate channels for
each category.
The trace API is unchanged, it is still possible for an application to
register a single channel for the 'ANY' category to see all outputt,
if it does not need this level of detail.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/8552)
When OSSL_trace_get_category_num() is called with an unknown category
name, it returns -1. This case needs to be considered in order to
avoid out-of-bound memory access to the `trace_channels` array.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/8552)
Partially reverts d33d76168f Don't fail when tracing is disabled
Commit d33d76168f fixed the problem that the initialization of
libcrypto failed when tracing was disabled, because the unoperational
ossl_trace_init() function returned a failure code. The problem was
fixed by changing its return value from failure to success.
As part of the fix the return values of other unimplemented trace API
functions (like OSSL_trace_set_channel(),OSSL_trace_set_callback())
was changed from failure to success, too. This change was not necessary
and is a bit problematic IMHO, because nobody expects an unimplemented
function to pretend it succeeded.
It's the application's duty to handle the case correctly when the trace
API is not enabled (i.e., OPENSSL_NO_TRACE is defined), not the API's job
to pretend success just to prevent the application from failing.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/8552)
>=20% faster than present code.
Signed-off-by: Patrick Steuer <patrick.steuer@de.ibm.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8560)
The naming of generated assembler wasn't done quite right. There are
assembler files that are generated from a perl script, and there are
those who are not. Only the former must be renamed to the platform
specific asm extension.
Furthermore, we need to make sure that 'OSSL_provider_init' isn't case
sensitive on VMS, to allow for the least surprise for provider
builders.
Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8529)
The initialisation was also flawed, failing to account for padding and
alignment bytes.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8611)
When 'openssl dgst' is called with a MD alias (such as sha256) and no
further arguments (i.e. input is taken from stdin), the MD name wasn't
shown.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/8609)
If the structures have empty padding bytes, ensure they are zeroed.
These structures are added to seed pools as complete blocks including
any padding and alignment bytes.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8610)
Revert win32_pathbyaddr() which is used in DSO_dsobyaddr().
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8596)
Replace it with InitializeCriticalSection()
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8596)
Refer to FIPS 140-2 section 4.9.2 Conditional Tests for details.
The check is fairly simplistic, being for the entropy sources to not feed
the DRBG the same block of seed material twice in a row. Only the first
DRBG in a chain is subject to this check, latter DRBGs are assumed to be
safely seeded via the earlier DRBGs.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8599)
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Kurt Roeckx <kurt@roeckx.be>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/8569)
