INSTALL_PREFIX is a confusing name, as there's also --prefix.
Instead, tag along with the rest of the open source world and adopt
the Makefile variable DESTDIR to designate the desired staging
directory.
The Configure option --install_prefix is removed, the only way to
designate a staging directory is with the Makefile variable (this is
also implemented for VMS' descrip.mms et al).
Reviewed-by: Rich Salz <rsalz@openssl.org>
Some keys are attached to the full RSA CSP which doesn't support SHA2
algorithms: uses the AES CSP if present.
Reviewed-by: Tim Hudson <tjh@openssl.org>
The old building scripts get removed, they are hopelessly gone in bit
rot by now.
Also remove the old symbol hacks. They were needed needed to shorten
some names to 31 characters, and to resolve other symbol clashes.
Because we now compile with /NAMES=(AS_IS,SHORTENED), this is no
longer required.
Reviewed-by: Rich Salz <rsalz@openssl.org>
In build.info files, make the include directory in the build directory
absolute, or Configure will think it should be added to the source
directory top. Configure will turn it into a relative path if
possible.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Some time ago, we had a ex_libs configuration setting that could be
divided into lflags and ex_libs. These got divided in two settings,
lflags and ex_libs, and the former was interpreted to be general
linking flags.
Unfortunately, that conclusion wasn't entirely accurate. Most of
those linking were meant to end up in a very precise position on the
linking command line, just before the spec of libraries the linking
depends on.
Back to the drawing board, we're diving things further, now having
lflags, which are linking flags that aren't depending on command line
position, plib_lflags, which are linking flags that should show up just
before the spec of libraries to depend on, and finally ex_libs, which
is the spec of extra libraries to depend on.
Also, documentation is changed in Configurations/README. This was
previously forgotten.
Reviewed-by: Kurt Roeckx <kurt@openssl.org>
Now that we have the foundation for the "unified" build scheme in
place, we add build.info files. They have been generated from the
Makefiles in the same directories. Things that are platform specific
will appear in later commits.
Reviewed-by: Andy Polyakov <appro@openssl.org>
The lflags configuration had a weird syntax with a % as separator. If
it was present, whatever came before ended up as PEX_LIBS in Makefile
(usually, this is LDFLAGS), while whatever came after ended up as
EX_LIBS.
This change splits that item into lflags and ex_libs, making their use
more explicit.
Also, PEX_LIBS in all the Makefiles are renamed to LDFLAGS.
Reviewed-by: Rich Salz <rsalz@openssl.org>
This was done by the following
find . -name '*.[ch]' | /tmp/pl
where /tmp/pl is the following three-line script:
print unless $. == 1 && m@/\* .*\.[ch] \*/@;
close ARGV if eof; # Close file to reset $.
And then some hand-editing of other files.
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
engines_obj changed name to padlock_obj in Configure. We need to do
the corresponding ENGINES_ASM_OBJ -> PADLOCK_ASM_OBJ in appropriate
Makefile.ins.
Reviewed-by: Rich Salz <rsalz@openssl.org>
The GOST engine is now out of date and is removed by this commit. An up
to date GOST engine is now being maintained in an external repository.
See:
https://wiki.openssl.org/index.php/Binaries
Reviewed-by: Richard Levitte <levitte@openssl.org>
Remove lint, tags, dclean, tests.
This is prep for a new makedepend scheme.
This is temporary pending unified makefile, and might help it.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Create Makefile's from Makefile.in
Rename Makefile.org to Makefile.in
Rename Makefiles to Makefile.in
Address review feedback from Viktor and Richard
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Note: there's a larger number of implementations in crypto/evp/ that
aren't affected because they include evp_locl.h. They will be handled
in a separate commit.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Only two macros CRYPTO_MDEBUG and CRYPTO_MDEBUG_ABORT to control this.
If CRYPTO_MDEBUG is not set, #ifdef out the whole debug machinery.
(Thanks to Jakob Bohm for the suggestion!)
Make the "change wrapper functions" be the only paradigm.
Wrote documentation!
Format the 'set func' functions so their paramlists are legible.
Format some multi-line comments.
Remove ability to get/set the "memory debug" functions at runtme.
Remove MemCheck_* and CRYPTO_malloc_debug_init macros.
Add CRYPTO_mem_debug(int flag) function.
Add test/memleaktest.
Rename CRYPTO_malloc_init to OPENSSL_malloc_init; remove needless calls.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Rename BUF_{strdup,strlcat,strlcpy,memdup,strndup,strnlen}
to OPENSSL_{strdup,strlcat,strlcpy,memdup,strndup,strnlen}
Add #define's for the old names.
Add CRYPTO_{memdup,strndup}, called by OPENSSL_{memdup,strndup} macros.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Remove RSA_FLAG_SIGN_VER: this was origininally used to retain binary
compatibility after RSA_METHOD was extended to include rsa_sign and
rsa_verify fields. It is no longer needed.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Remove sign/verify and required_pkey_type fields of EVP_MD: these are a
legacy from when digests were linked to public key types. All signing is
now handled by the corresponding EVP_PKEY_METHOD.
Only allow supported digest types in RSA EVP_PKEY_METHOD: other algorithms
already block unsupported types.
Remove now obsolete EVP_dss1() and EVP_ecdsa().
Reviewed-by: Richard Levitte <levitte@openssl.org>
For some reason the dasync sha1 functions did not start with the
dasync prefix like all of the other functions do. Changed for
consistency.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Initial API implemented for notifying applications that an ASYNC_JOB
has completed. Currently only s_server is using this. The Dummy Async
engine "cheats" in that it notifies that it has completed *before* it
pauses the job. A normal async engine would not do that.
Only the posix version of this has been implemented so far, so it will
probably fail to compile on Windows at the moment.
Reviewed-by: Rich Salz <rsalz@openssl.org>
This engine is for developers of async aware applications. It simulates
asynchronous activity with external hardware. This initial version supports
SHA1 and RSA. Certain operations using those algorithms have async job
"pauses" in them - using the new libcrypto async capability.
Reviewed-by: Rich Salz <rsalz@openssl.org>
There are a number of engines in the OpenSSL source code which are now
obsolete. The following engines have been removed: 4758cca, aep, atalla,
cswift, nuron, sureware.
Reviewed-by: Rich Salz <rsalz@openssl.org>
The ossltest engine wraps the built-in implementation of aes128-cbc.
Normally in an engine the cipher_data structure is automatically allocated
by the EVP layer. However this relies on the engine specifying up front
the size of that cipher_data structure. In the case of ossltest this value
isn't available at compile time. This change makes the ossltest engine
allocate its own cipher_data structure instead of leaving it to the EVP
layer.
Reviewed-by: Andy Polyakov <appro@openssl.org>
There are many places (nearly 50) where we malloc and then memset.
Add an OPENSSL_zalloc routine to encapsulate that.
(Missed one conversion; thanks Richard)
Also fixes GH328
Reviewed-by: Richard Levitte <levitte@openssl.org>
This was obsolete in 2001. This is not the same as Gost94 digest.
Thanks to Dmitry Belyavsky <beldmit@gmail.com> for review and advice.
Reviewed-by: Matt Caswell <matt@openssl.org>
Use a dynamic engine for ossltest engine so that we can build it without
subsequently deploying it during install. We do not want people accidentally
using this engine.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
This engine is for testing purposes only. It provides crippled crypto
implementations and therefore must not be used in any instance where
security is required.
This will be used by the forthcoming libssl test harness which will operate
as a man-in-the-middle proxy. The test harness will be able to modify
TLS packets and read their contents. By using this test engine packets are
not encrypted and MAC codes always verify.
Reviewed-by: Richard Levitte <levitte@openssl.org>
The return value of i2d functions can be negative if an error occurs.
Therefore don't assign the return value to an unsigned type and *then*
check if it is negative.
RT#3862
Reviewed-by: Richard Levitte <levitte@openssl.org>
The update: target in engines/ didn't recurse into engines/ccgost.
The update: and depend: targets in engines/ccgost needed a fixup.
Reviewed-by: Rich Salz <rsalz@openssl.org>
We had updates of certain header files in both Makefile.org and the
Makefile in the directory the header file lived in. This is error
prone and also sometimes generates slightly different results (usually
just a comment that differs) depending on which way the update was
done.
This removes the file update targets from the top level Makefile, adds
an update: target in all Makefiles and has it depend on the depend: or
local_depend: targets, whichever is appropriate, so we don't get a
double run through the whole file tree.
Reviewed-by: Rich Salz <rsalz@openssl.org>
For the various string-compare routines (strcmp, strcasecmp, str.*cmp)
use "strcmp()==0" instead of "!strcmp()"
Reviewed-by: Tim Hudson <tjh@openssl.org>
Just as with the OPENSSL_malloc calls, consistently use sizeof(*ptr)
for memset and memcpy. Remove needless casts for those functions.
For memset, replace alternative forms of zero with 0.
Reviewed-by: Richard Levitte <levitte@openssl.org>
For a local variable:
TYPE *p;
Allocations like this are "risky":
p = OPENSSL_malloc(sizeof(TYPE));
if the type of p changes, and the malloc call isn't updated, you
could get memory corruption. Instead do this:
p = OPENSSL_malloc(sizeof(*p));
Also fixed a few memset() calls that I noticed while doing this.
Reviewed-by: Richard Levitte <levitte@openssl.org>
ONEDIRS, EDIRS and WDIRS aren't used anywhere. Most probably remains
from a build system of the past, it's time they get put to rest.
Reviewed-by: Rich Salz <rsalz@openssl.org>
After the finale, the "real" final part. :) Do a recursive grep with
"-B1 -w [a-zA-Z0-9_]*_free" to see if any of the preceeding lines are
an "if NULL" check that can be removed.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Don't check for NULL before calling free functions. This gets:
ERR_STATE_free
ENGINE_free
DSO_free
CMAC_CTX_free
COMP_CTX_free
CONF_free
NCONF_free NCONF_free_data _CONF_free_data
A sk_free use within OBJ_sigid_free
TS_TST_INFO_free (rest of TS_ API was okay)
Doc update for UI_free (all uses were fine)
X509V3_conf_free
X509V3_section_free
X509V3_string_free
Reviewed-by: Richard Levitte <levitte@openssl.org>
This gets BN_.*free:
BN_BLINDING_free BN_CTX_free BN_FLG_FREE BN_GENCB_free
BN_MONT_CTX_free BN_RECP_CTX_free BN_clear_free BN_free BUF_MEM_free
Also fix a call to DSA_SIG_free to ccgost engine and remove some #ifdef'd
dead code in engines/e_ubsec.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Add OPENSSL_clear_free which merges cleanse and free.
(Names was picked to be similar to BN_clear_free, etc.)
Removed OPENSSL_freeFunc macro.
Fixed the small simple ones that are left:
CRYPTO_free CRYPTO_free_locked OPENSSL_free_locked
Reviewed-by: Richard Levitte <levitte@openssl.org>
With no more symlinks, there's no need for those variables, or the links
target. This also goes for all install: and uninstall: targets that do
nothing but copy $(EXHEADER) files, since that's now taken care of by the
top Makefile.
Also, removed METHTEST from test/Makefile. It looks like an old test that's
forgotten...
Reviewed-by: Rich Salz <rsalz@openssl.org>
Rather than making include/openssl/foo.h a symlink to
crypto/foo/foo.h, this change moves the file to include/openssl/foo.h
once and for all.
Likewise, move crypto/foo/footest.c to test/footest.c, instead of
symlinking it there.
Originally-by: Geoff Thorpe <geoff@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
The logic with how 'ok' was calculated didn't quite convey what's "ok",
so the logic is slightly redone to make it less confusing.
Reviewed-by: Andy Polyakov <appro@openssl.org>
EVP_.*free; this gets:
EVP_CIPHER_CTX_free EVP_PKEY_CTX_free EVP_PKEY_asn1_free
EVP_PKEY_asn1_set_free EVP_PKEY_free EVP_PKEY_free_it
EVP_PKEY_meth_free; and also EVP_CIPHER_CTX_cleanup
Reviewed-by: Kurt Roeckx <kurt@openssl.org>
Filled in lots of return value checks that were missing the GOST engine, and
added appropriate error handling.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Start ensuring all OpenSSL "free" routines allow NULL, and remove
any if check before calling them.
This gets DH_free, DSA_free, RSA_free
Reviewed-by: Matt Caswell <matt@openssl.org>
catch up with the Unix build.
A number of new tests, among others test/tocsp.com
Define INTERNAL in ssl/ssl-lib.com to allow for '#include "internal/foo.h"'
Reviewed-by: Andy Polyakov <appro@openssl.org>
When you use "-s" in the make flag, you see that engines outputs
a blank line because EDIRS isn't set. This is a debug echo that
isn't needed.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Remove support for SHA0 and DSS0 (they were broken), and remove
the ability to attempt to build without SHA (it didn't work).
For simplicity, remove the option of not building various SHA algorithms;
you could argue that SHA_224/256/384/512 should be kept, since they're
like crypto algorithms, but I decided to go the other way.
So these options are gone:
GENUINE_DSA OPENSSL_NO_SHA0
OPENSSL_NO_SHA OPENSSL_NO_SHA1
OPENSSL_NO_SHA224 OPENSSL_NO_SHA256
OPENSSL_NO_SHA384 OPENSSL_NO_SHA512
Reviewed-by: Richard Levitte <levitte@openssl.org>
OPENSSL_NO_RIPEMD160, OPENSSL_NO_RIPEMD merged into OPENSSL_NO_RMD160
OPENSSL_NO_FP_API merged into OPENSSL_NO_STDIO
Two typo's on #endif comments fixed:
OPENSSL_NO_ECB fixed to OPENSSL_NO_OCB
OPENSSL_NO_HW_SureWare fixed to OPENSSL_NO_HW_SUREWARE
Reviewed-by: Richard Levitte <levitte@openssl.org>
This commit removes NCR, Tandem, Cray.
Regenerates TABLE.
Removes another missing BEOS fluff.
The last platform remaining on this ticket is WIN16.
Reviewed-by: Richard Levitte <levitte@openssl.org>
for dummytest if gost is compiled out, since the name of the test is not
standard (dummytest segfaults). Also the old name caused problems for git
because the executable was not in the .gitignore file
Reviewed-by: Emilia Käsper <emilia@openssl.org>
The following #ifdef tests were all removed:
__MWERKS__
MAC_OS_pre_X
MAC_OS_GUSI_SOURCE
MAC_OS_pre_X
OPENSSL_SYS_MACINTOSH_CLASSIC
OPENSSL_SYS_MACOSX_RHAPSODY
Reviewed-by: Andy Polyakov <appro@openssl.org>
Add a dozen more const declarations where appropriate.
These are from Justin; while adding his patch, I noticed
ASN1_BIT_STRING_check could be fixed, too.
Reviewed-by: Dr. Stephen Henson <steve@openssl.org>
The call to setenv in gost2814789t.c is not portable and may
not reflect the location of the GOST ENGINE on all platforms anyway.
Instead set OPENSSL_ENGINES in test/Makefile
Reviewed-by: Geoff Thorpe <geoff@openssl.org>
Original definition depended on __LONG_MAX__ that is not guaranteed to
be present. As we don't support platforms with int narrower that 32 bits
it's appropriate to make defition inconditional.
PR: 3165
Multiple copies of the ENGINE will cause problems when it is cleaned up as
the methods are stored in static structures which will be overwritten and
freed up more than once.
Set static methods to NULL when the ENGINE is freed so it can be reloaded.
different options:
"64" The build system will choose /POINTER_SIZE=64=ARGV if
the compiler supports it, otherwise /POINTER_SIZE=64.
"64=" The build system will force /POINTER_SIZE=64.
"64=ARGV" The build system will force /POINTER_SIZE=64=ARGV.
