Discovered during coverage testing.
Remove unneccesary check when using ossl_dh_get0_params() and
ossl_dsa_get0_params(). These point to addresses and can not fail
for any existing calls.
Make dsa keygen tests only available in the FIPS module - as they are
not used in the default provider.
Change ossl_ffc_set_digest() to return void as it cannot fail.
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20359)
Related to #20268
DSA_sign() assumes that the signature passed in is related to DSA_size().
If q is negative then DSA_size() actually fails and returns 0.
A test that tries to allocate the signature buffer using DSA_size() and then
pass it to DSA_sign() will then either.
(1) Have a signature buffer of NULL. In this case it was leaking data
returned via i2d_DSA_SIG.
(2) Cause a seg fault because we created a buffer that was not large
enough to hold the signature. As it already checked zero we also now
check for negative values also.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Todd Short <todd.short@me.com>
(Merged from https://github.com/openssl/openssl/pull/20553)
Check the return from DSA_set0_key and generate an error on failure.
Technically a false positive since the function always returns success.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/20409)
Fixes#20268
Values such as q=1 or priv=0 caused infinite loops when calling
DSA_sign() without these changes.
There are other cases where bad domain parameters may have caused
infinite loops where the retry counter has been added. The simpler case
of priv=0 also hits this case. q=1 caused an infinite loop in the setup.
The max retry value has been set to an arbitrary value of 8 (it is
unlikely to ever do a single retry for valid values).
The minimum q bits was set to an arbitrary value of 128 (160 is still
used for legacy reasons when using 512 bit keys).
Thanks @guidovranken for detecting this, and @davidben for his
insightful analysis.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20384)
This PR is based off the contributions in PR #9223 by Jemmy1228.
It has been modified and reworked to:
(1) Work with providers
(2) Support ECDSA and DSA
(3) Add a KDF HMAC_DRBG implementation that shares code with the RAND HMAC_DRBG.
A nonce_type is passed around inside the Signing API's, in order to support any
future deterministic algorithms.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18809)
This mandates following SP 800-56A which, in 5.6.2.4, mandates a comparision
against a newly calculated public key.
Co-authored-by: Randall Steck <rsteck@thinqsoft.com>
Co-authored-by: Mark J. Minnoch <mark@keypair.us>
Co-authored-by: Steve Weymann <steve@keypair.us>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/19510)
partially revamped from #16712
- fall thru -> fall through
- time stamp -> timestamp
- host name -> hostname
- ipv6 -> IPv6
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19059)
Since OPENSSL_malloc() and friends report ERR_R_MALLOC_FAILURE, and
at least handle the file name and line number they are called from,
there's no need to report ERR_R_MALLOC_FAILURE where they are called
directly, or when SSLfatal() and RLAYERfatal() is used, the reason
`ERR_R_MALLOC_FAILURE` is changed to `ERR_R_CRYPTO_LIB`.
There were a number of places where `ERR_R_MALLOC_FAILURE` was reported
even though it was a function from a different sub-system that was
called. Those places are changed to report ERR_R_{lib}_LIB, where
{lib} is the name of that sub-system.
Some of them are tricky to get right, as we have a lot of functions
that belong in the ASN1 sub-system, and all the `sk_` calls or from
the CRYPTO sub-system.
Some extra adaptation was necessary where there were custom OPENSSL_malloc()
wrappers, and some bugs are fixed alongside these changes.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19301)
The private key for rsa, dsa, dh and ecx was being included when the
selector was just the public key. (ec was working correctly).
This matches the documented behaviour.
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/17200)
EVP_PKEY_CTX_new_from_pkey() and EVP_CIPHER_CTX_new().
Otherwise may result in memory errors.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/16892)
It is possible to call built-in EVP_PKEY_METHOD functions with a provided
key. For example this might occur if a custom EVP_PKEY_METHOD is in use
that wraps a built-in EVP_PKEY_METHOD. Therefore our EVP_PKEY_METHOD
functions should not assume that we are using a legacy key. Instead we
get the low level key using EVP_PKEY_get0_RSA() or other similar functions.
This "does the right thing" if the key is actually provided.
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Nicola Tuveri <nic.tuv@gmail.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/16118)
That check was seen as necessary at the time, but other changes have
been made since, so we now have better control on when we're handling
legacy structures and methods, making it safe to run the export_to
function on keys with foreign methods.
The basic message is that foreign methods must set key structure
values according to our standards no matter what, or not set them at
all. This has really always been the case, but was harder to see at
the time because of interaction with other bugs.
Fixes#15927
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15996)
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15974)
For functions that exist in 1.1.1 provide a simple aliases via #define.
Fixes#15236
Functions with OSSL_DECODER_, OSSL_ENCODER_, OSSL_STORE_LOADER_,
EVP_KEYEXCH_, EVP_KEM_, EVP_ASYM_CIPHER_, EVP_SIGNATURE_,
EVP_KEYMGMT_, EVP_RAND_, EVP_MAC_, EVP_KDF_, EVP_PKEY_,
EVP_MD_, and EVP_CIPHER_ prefixes are renamed.
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15405)
The new names are ossl_err_load_xxx_strings.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15446)
We previously took an EVP_KEYMGMT pointer, but now found it necessary
to use a different import function in some cases. Since that's the
only thing we use from EVP_KEYMGMT, we might as well pass the import
function directly, allowing for some flexibility in how export_to is
used.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15293)
The low-level engine and app method based keys have to be treated
as foreign and must be used with old legacy pmeths.
Fixes#14632
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14859)
To avoid mutating key data add OSSL_FUNC_KEYMGMT_DUP function
to the provider API and implement it for all asym-key key
managements.
Use it when copying everything to an empty EVP_PKEY
which is the case with EVP_PKEY_dup().
Fixes#14658
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/14793)
This required refactoring a number of functions from the diverse
EVP_PKEY_ASN1_METHOD implementations to become shared backend
functions. It also meant modifying a few of them to return pointers
to our internal RSA / DSA/ DH / EC_KEY, ... structures instead of
manipulating an EVP_PKEY pointer directly, letting the caller do the
latter.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14314)
Partial fix for #12964
This adds ossl_ names for the following symbols:
dsa_check_pairwise, dsa_check_params, dsa_check_priv_key, dsa_check_pub_key, dsa_check_pub_key_partial,
dsa_do_sign_int, dsa_ffc_params_fromdata,
dsa_generate_ffc_parameters, dsa_generate_public_key,
dsa_get0_params, dsa_key_fromdata, dsa_new_with_ctx, dsa_pkey_method, dsa_sign_int
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14231)
Added primality check on p and q in the ossl_ffc_params_simple_validate().
Checking for p and q sizes in the default provider is made more
lenient.
Added two testcases for invalid parameters.
Fixes#13950
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/14148)
Because decoders are coupled with keymgmts from the same provider,
ours need to produce provider side keys the same way. Since our
keymgmts create key data with the provider library context, so must
our decoders.
We solve with functions to adjust the library context of decoded keys,
and use them.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/13661)
Without these check, a DSA structure without key parameters will cause
these functions to crash. This is also the case in pre-3.0 OpenSSL,
but since we now extract these data early, to cache them in the
EVP_PKEY structure, the same crash happens earlier and much more
internally.
The added checks are of the same kind as DSA_security_bits() already
does.
Fixes#13610
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/13611)
EVP_PKEY_CTX_set_dsa_ functions were only available when DSA was
enabled ('no-dsa' not configured). However, that makes it impossible
to use these functions with an engine or a provider that happens to
implement DSA. This change solves that problem by shuffling these
functions to more appropriate places.
Fixes#13529
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/13530)
