Fixes#20710
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20745)
According to docs, EVP_PKEY_get_int_param should return 1 on Success, and
0 on Failure. So, fix checking of this return value at check_curve
CLA: trivial
Reviewed-by: Todd Short <todd.short@me.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20770)
Original author: Nevine Ebeid (Amazon)
Fixes: CVE-2023-1255
The buffer overread happens on decrypts of 4 mod 5 sizes.
Unless the memory just after the buffer is unmapped this is harmless.
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tom Cosgrove <tom.cosgrove@arm.com>
(Merged from https://github.com/openssl/openssl/pull/20759)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/20736)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/20736)
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tom Cosgrove <tom.cosgrove@arm.com>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/20298)
We no longer need to cast function pointers to PTR_SIZE_INT.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20748)
Bit-fiddling pointers is technically implementation defined behavior
in the C specification so the following code is not supported in all
platforms:
PTR_SIZE_INT mask;
void * a, b, c;
int boolean_flag;
mask = 0 - boolean_flag;
/* Not guaranteed to be a valid ptr to a or b on all platforms */
a = (void *)
((((PTR_SIZE_INT) b & ~mask) | (((PTR_SIZE_INT)) c & mask)));
Using a ternary conditional operator is supported on all platforms
(i.e. `a = boolean_flag ? b : c;`).
On most modern compilers/CPUs, this will be faster, since it will
get converted to a CMOV instruction.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20748)
This keeps the interface consistent with other HPKE API's.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20583)
This is about a timing leak in the topmost limb
of the internal result of RSA_private_decrypt,
before the padding check.
There are in fact at least three bugs together that
caused the timing leak:
First and probably most important is the fact that
the blinding did not use the constant time code path
at all when the RSA object was used for a private
decrypt, due to the fact that the Montgomery context
rsa->_method_mod_n was not set up early enough in
rsa_ossl_private_decrypt, when BN_BLINDING_create_param
needed it, and that was persisted as blinding->m_ctx,
although the RSA object creates the Montgomery context
just a bit later.
Then the infamous bn_correct_top was used on the
secret value right after the blinding was removed.
And finally the function BN_bn2binpad did not use
the constant-time code path since the BN_FLG_CONSTTIME
was not set on the secret value.
In order to address the first problem, this patch
makes sure that the rsa->_method_mod_n is initialized
right before the blinding context.
And to fix the second problem, we add a new utility
function bn_correct_top_consttime, a const-time
variant of bn_correct_top.
Together with the fact, that BN_bn2binpad is already
constant time if the flag BN_FLG_CONSTTIME is set,
this should eliminate the timing oracle completely.
In addition the no-asm variant may also have
branches that depend on secret values, because the last
invocation of bn_sub_words in bn_from_montgomery_word
had branches when the function is compiled by certain
gcc compiler versions, due to the clumsy coding style.
So additionally this patch stream-lined the no-asm
C-code in order to avoid branches where possible and
improve the resulting code quality.
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20281)
This reverts commit b1892d21f8.
Except for the moving derive_kdk to a separate function.
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20281)
Function EVP_PKEY_get_bn_param() uses temporary buffer (on stack or
heap allocated) to store serialized bignum, but after deserializing it
into BIGNUM*, the buffer is not erased and may contain sensitive data.
This change makes sure the buffer is erased if it was successfully
filled before. Unfortunately, it does not distinguish between public and
private key components, and will always erase the buffer.
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20639)
Calling OPENSSL_init_crypto from inside a RUN_ONCE seems like a bad idea.
This is especially bad if OPENSSL_init_crypto can recursively end up
attempting to call the RUN_ONCE that we're already inside.
The initialisation in OPENSSL_init_crypto is already "run once" protected.
There is no need to protect it "twice".
Fixes#20653
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20662)
(cherry picked from commit a9745427cd)
Discovered during coverage testing.
Remove unneccesary check when using ossl_dh_get0_params() and
ossl_dsa_get0_params(). These point to addresses and can not fail
for any existing calls.
Make dsa keygen tests only available in the FIPS module - as they are
not used in the default provider.
Change ossl_ffc_set_digest() to return void as it cannot fail.
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20359)
Fixes a "Incompatible function pointer types" error.
In prior versions, this was a warning, but is now an error.
CLA: trivial
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20654)
Related to #20268
DSA_sign() assumes that the signature passed in is related to DSA_size().
If q is negative then DSA_size() actually fails and returns 0.
A test that tries to allocate the signature buffer using DSA_size() and then
pass it to DSA_sign() will then either.
(1) Have a signature buffer of NULL. In this case it was leaking data
returned via i2d_DSA_SIG.
(2) Cause a seg fault because we created a buffer that was not large
enough to hold the signature. As it already checked zero we also now
check for negative values also.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Todd Short <todd.short@me.com>
(Merged from https://github.com/openssl/openssl/pull/20553)
CLA: trivial
There is an incorrect null pointer check and this ccommit resolves it.
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Todd Short <todd.short@me.com>
(Merged from https://github.com/openssl/openssl/pull/20646)
Similiar to the issue found in PR #20553 for DSA_sign().
ECDSA_sign() leaked memory if the signature was NULL
when i2d_ECDSA_SIG was called.
Note that this does not affect the higher level EVP
functions as they correctly handle NULL.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Todd Short <todd.short@me.com>
(Merged from https://github.com/openssl/openssl/pull/20554)
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Tom Cosgrove <tom.cosgrove@arm.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20629)
Change-Id: Ia94e528a2d55934435de6a2949784c52eb38d82f
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20621)
Add support for the RFC7250 certificate-type extensions.
Alows the use of only private keys for connection (i.e. certs not needed).
Add APIs
Add unit tests
Add documentation
Add s_client/s_server support
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18185)
Even though we check the leaf cert to confirm it is valid, we
later ignored the invalid flag and did not notice that the leaf
cert was bad.
Fixes: CVE-2023-0465
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20585)
CLA: trivial
The the provider, context duplication method for signature, key
exchange, asymmetric cipher, and key encapsulation is optional. But if
they are missing, we will get a segmentation fault in `EVP_PKEY_CTX_dup`
because they are called without null pointer checking.
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20581)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/20204)
Fixes a regression from 3.0 from the obj creation refactoring.
Fixes#20555
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20556)
The changes from the following commit should also apply to
Visual Studio 2010
2d46a44ff2 (r104867505)
Fixes build errors: undefined symbol InterlockedOr64
on Windows 2003, Visual Studio 2010 for x86 target.
CLA: trivial
Signed-off-by: Georgi Valkov <gvalkov@gmail.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20557)
A security vulnerability has been identified in all supported versions
of OpenSSL related to the verification of X.509 certificate chains
that include policy constraints. Attackers may be able to exploit this
vulnerability by creating a malicious certificate chain that triggers
exponential use of computational resources, leading to a denial-of-service
(DoS) attack on affected systems.
Fixes CVE-2023-0464
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/20571)
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/20436)
Commit ac21c1780a VMS knows POSIX threads too!
removed ossl_crypto_mem_barrier for POSIX systems.
Remove it for Win32 and other architectures as well.
Resolves issue #19506 Unable to build under bcc32c environment (Embarcadero
clang compiler).
Signed-off-by: Čestmír Kalina <ckalina@redhat.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20538)
For example if would be helpful if we got more useful information if the
caller forgot to set the peer address.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20514)
As the sleep() call is interruptible, it is not even a good idea to call
it in a loop if the caller uses some ridiculously large value as an
infinity just waiting for an interrupt.
Fixes#20524
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Tom Cosgrove <tom.cosgrove@arm.com>
(Merged from https://github.com/openssl/openssl/pull/20533)
Reviewed-by: Tom Cosgrove <tom.cosgrove@arm.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20519)
(cherry picked from commit d4765408c7)
Reviewed-by: Tom Cosgrove <tom.cosgrove@arm.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20519)
(cherry picked from commit 110dac5783)
Signed-off-by: Čestmír Kalina <ckalina@redhat.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/12256)
The mention of the GPL shouldn't have been there.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20517)
RISC-V currently only offers a GMULT() callback for accelerated
processing. Let's implement the missing piece to have GHASH()
available as well. Like GMULT(), we provide a variant for
systems with the Zbkb extension (including brev8).
The integration follows the existing pattern for GMULT()
in RISC-V. We keep the C implementation as we need to decide
if we can call an optimized routine at run-time.
The C implementation is the fall-back in case we don't have
any extensions available that can be used to accelerate
the calculation.
Tested with all combinations of possible extensions
on QEMU (limiting the available instructions accordingly).
No regressions observed.
Signed-off-by: Christoph Müllner <christoph.muellner@vrull.eu>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20078)
The existing GCM calculation provides some potential
for further optimizations. Let's use the demo code
from the RISC-V cryptography extension groups
(https://github.com/riscv/riscv-crypto), which represents
the extension architect's intended use of the clmul instruction.
The GCM calculation depends on bit and byte reversal.
Therefore, we use the corresponding instructions to do that
(if available at run-time).
The resulting computation becomes quite compact and passes
all tests.
Note, that a side-effect of this change is a reduced register
usage in .gmult(), which opens the door for an efficient .ghash()
implementation.
Signed-off-by: Christoph Müllner <christoph.muellner@vrull.eu>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20078)
A recent commit introduced a Perl module for common code.
This patch changes the GCM code to use this module, removes duplicated code,
and moves the instruction encoding functions into the module.
Signed-off-by: Christoph Müllner <christoph.muellner@vrull.eu>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20078)
On systems where Devel::StackTrace is available, we can use this module
to create more usable error messages. Further, don't print error
messages in case of official register aliases, but simply accept them.
Signed-off-by: Christoph Müllner <christoph.muellner@vrull.eu>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20078)
Move helper functions and instruction encoding functions
into a riscv.pm Perl module to avoid pointless code duplication.
Signed-off-by: Christoph Müllner <christoph.muellner@vrull.eu>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20078)
In RISC-V we have multiple extensions, that can be
used to accelerate processing.
The known extensions are defined in riscv_arch.def.
From that file test functions of the following
form are generated: RISCV_HAS_$ext().
In recent commits new ways to define the availability
of these test macros have been defined. E.g.:
#define RV32I_ZKND_ZKNE_CAPABLE \
(RISCV_HAS_ZKND() && RISCV_HAS_ZKNE())
[...]
#define RV64I_ZKND_ZKNE_CAPABLE \
(RISCV_HAS_ZKND() && RISCV_HAS_ZKNE())
This leaves us with two different APIs to test capabilities.
Further, creating the same macros for RV32 and RV64 results
in duplicated code (see example above).
This inconsistent situation makes it hard to integrate
further code. So let's clean this up with the following steps:
* Replace RV32I_* and RV64I_* macros by RICSV_HAS_* macros
* Move all test macros into riscv_arch.h
* Use "AND" and "OR" to combine tests with more than one extension
* Rename include files for accelerated processing (remove extension
postfix).
We end up with compile time tests for RV32/RV64 and run-time tests
for available extensions. Adding new routines (e.g. for vector crypto
instructions) should be straightforward.
Testing showed no regressions.
Signed-off-by: Christoph Müllner <christoph.muellner@vrull.eu>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20078)
Fixes#19092
The code looks like it was written to work with PBES1.
As it had no tests, this would of then broken when PBES2
was introduced at a later point.
Also added libctx and propq support.
This affects the shroudedkeybag object.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20134)
The EVP layer should not rely on the underlying low level code to
handle catching incorrect reuse of contexts.
Add a flag to mark a context as finalised as needed and then catch and
immediately error on Update/Final operations if called improperly.
Signed-off-by: Simo Sorce <simo@redhat.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/20375)
If the ctx was *really* needed we'll probably fail later with an error
anyway, so no point in failing immediately.
Document that this behavior is dependent on the provider used to
implement the signature/verification.
Signed-off-by: Simo Sorce <simo@redhat.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/20375)
Probe first to see if we have a PKCS8 file to improve decoder performance.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/20416)
The assignment of the result of EVP_get_digestbynid() did not happen
which made the fallback not actually perform the fallback.
CLA: trivial
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20447)
"adrl" is a pseudo-instruction used to calculate an address relative
to PC. It's not recognized by clang resulting in a compilation error.
I've stumbled upon it when trying to integrate the bsaes-armv7 assmebly
logic into FreeBSD kernel, which uses clang as it's default compiler.
Note that this affect the build only if BSAES_ASM_EXTENDED_KEY is
defined, which is not the default option in OpenSSL.
The solution here is to replace it with an add instruction.
This mimics what has already been done in !BSAES_ASM_EXTENDED_KEY logic.
Because of that I've marked this as trivial CLA.
CLA: trivial
Signed-off-by: Kornel Dulęba <mindal@semihalf.com>
Reviewed-by: Tom Cosgrove <tom.cosgrove@arm.com>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20458)
This file was only recently introduced and the missing header slipped through
the review process.
Fixes#20461
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20470)
The keccak XOF used for KMAC can be simplified by using klmd. This speeds up
XOF processing in cases where more than one result block is needed.
Signed-off-by: Juergen Christ <jchrist@linux.ibm.com>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20431)
Especially, it's important to use BIO_ADDR_sockaddr_size() instead of
taking sizeof(addr), as BIO_ADDR is a union of several sockaddr variants
with different sizes, and some sendto() implementations are very picky
that the size is correct for the indicated sockaddr family.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20449)
include/internal/thread_arch.h didn't indicate this, now it does.
This also removes ossl_crypto_mem_barrier(), because we isn't used
anywhere, and doesn't build with compilers that don't support the GNU
extension __asm__.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/20440)
We can easily find out the keytype which should significantly improve
the performance of this function because we don't have to try every loaded
decoder.
Partial fix for #20399
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20412)
Make the SIGILL-based code easier to read, and don't use it on Apple Silicon.
Also fix "error: 'HWCAP(2)_*' macro redefined" warnings on FreeBSD.
Fixes#20188
Change-Id: I5618bbe9444cc40cb5705c6ccbdc331c16bab794
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20305)
Check the return from DSA_set0_key and generate an error on failure.
Technically a false positive since the function always returns success.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/20409)
This is an unused internal function. It should be added back
in if there is a need to set this value to something other than
NID_mgf1 (which is not likely).
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20321)
Coverage testing showed that ossl_ffc_params_fromdata() was not setting
OSSL_PKEY_PARAM_FFC_DIGEST_PROPS.
Adding a negative test also showed that ossl_ffc_params_copy() did not
do a shallow copy of the digest or digest property.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20385)
Similiar checks to the DSA code have been added for ECDSA also.
This should not be a problem when using named groups.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20384)
Fixes#20268
Values such as q=1 or priv=0 caused infinite loops when calling
DSA_sign() without these changes.
There are other cases where bad domain parameters may have caused
infinite loops where the retry counter has been added. The simpler case
of priv=0 also hits this case. q=1 caused an infinite loop in the setup.
The max retry value has been set to an arbitrary value of 8 (it is
unlikely to ever do a single retry for valid values).
The minimum q bits was set to an arbitrary value of 128 (160 is still
used for legacy reasons when using 512 bit keys).
Thanks @guidovranken for detecting this, and @davidben for his
insightful analysis.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20384)
Since GCC commit e154242724b084380e3221df7c08fcdbd8460674 the flag "-many"
is sometimes not passed to the assembler. Use .machine "any" just like
ecp_nistz256-ppc64 to prevent compile errors when built with some
configurations of GCC.
CLA: trivial
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20378)
According to the documentation and my analysis tool
ASN1_item_i2d() can return a negative value on error,
but this is not checked. Fix it by changing the error check condition.
CLA: trivial
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20251)
The provider functions OSSL_FUNC_keymgmt_import_types() and
OSSL_FUNC_keymgmt_export_types() do not get the provider context passed.
This makes it difficult for providers to implement these functions unless
its a static implementation returning a truly constant OSSL_PARAM array.
Some providers may have a need to return an OSSL_PARAM array that is
dependent on the provider configuration, or anything else that is contained
in its provider context.
Add extended variants of these functions that get the provider context passed.
The functions should still return a static and constant OSSL_PARAM array, but
may use the provider context to select the array to return dependent on its
context. The returned array must be constant at least until the provider is
unloaded.
Providers can implement only the original functions, or only the extended
functions, or both. Implementing at least one of those functions is required
if also the respective OSSL_FUNC_keymgmt_import() or OSSL_FUNC_keymgmt_export()
function is implemented. If an extended function is available, it is called by
evp_keymgmt_import_types() or evp_keymgmt_export_types(), otherwise the original
function is called.
This makes the code backward compatible. Existing providers will only implement
the original functions, so these functions will continued to be called.
Newer providers can choose to implement the extended functions, and thus can
benefit from the provider context being passed to the implementation.
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20255)
Also add checks on failing cert/CRL up_ref calls; improve coding style.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/19199)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/19199)
CLA: trivial
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20351)
When calling BIO-recvmmsg() and using a dgram pair we were failing to
raise an error in the case that a problem occurs. This means that the
reason behind a failure cannot be detected and all problems are treated
as fatal even if they may not be.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20030)
This results in spurious errors appearing on the queue in normal
operation, e.g. calling SSL_tick() with a QUIC connection will succeed,
but an error will end up on the queue anyway.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20030)
There is no point in calling OPENSSL_init_crypto() unless we are actually
going to be using the default libctx.
Fixes#20315
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20341)
BN_priv_rand_range_ex() and BN_add() both return a 0 on failure and a 1
on success. In case of failure, the algorithm should fail. However, the
branch that it goes through on failure is "goto end", not "goto err".
Therefore, the algorithm will return 1 which indicates success instead
of 0 for failure, leading to potential problems for the callers.
Fix it by changing the goto to "goto err" instead of "goto end".
CLA: trivial
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Todd Short <todd.short@me.com>
(Merged from https://github.com/openssl/openssl/pull/20279)
Conditioning it on $disabled{shared} isn't right, it will still end up
in the static variant of the library. It's better to use SHARED_SOURCE
for these sorts of things.
Fixes#20238
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Ben Kaduk <kaduk@mit.edu>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20240)
Also add corresponding tests and to this end update credentials
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/20160)
_umul128() is x86_64 (x64) only, while __umulh() works everywhere, but
doesn't generate optimal code on x64
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20244)
These aren't currently checked when they are called in cipher_aes_gcm_hw_armv8.inc,
but they are declared as returning as size_t the number of bytes they have processed,
and the aes_gcm_*_*_kernel (unroll by 4) versions of these do return the correct
values.
Change-Id: Ic3eaf139e36e29e8779b5bd8b867c08fde37a337
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20191)
This function returns an errorcode <= 0, but only < 0 is checked. Other
callers that check the return value perform this check correctly. Fix it
by changing the check to <= 0.
CLA: trivial
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20186)
BIO_dup_state() returns an error code <= 0 according to my analysis tool
and the documentation. Currently only == 0 is checked. Fix it by
changing the check condition.
CLA: trivial
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Todd Short <todd.short@me.com>
(Merged from https://github.com/openssl/openssl/pull/20194)
CMS_SharedInfo_encode() can also return a negative error value, but this
is not checked in the current check, only the zero error return value is
covered. A previous PR [1] fixed the other caller's check of
CMS_SharedInfo_encode in this file, but it seems like this place was
missed. Fix it by changing the check to <= 0.
[1] a752fc4da5
CLA: trivial
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20181)
default_check() can return a zero value to indicate an internal error in
one condition for the PRE_CTRL_STR_TO_PARAMS state. This state can be
reached from the default_fixup_args() function which does not check for
a zero value. All other callers of default_check() in that file do check
for a zero return value. Fix it by changing the check to <= 0.
CLA: trivial
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20175)
S390x has to ability to offload modular exponentiation and CRT operations to
Crypto Express Adapters. This possible performance optimization was not yet
used by OpenSSL. Add support for offloading and implement an optimized
version of RSA and DH with it.
The environment variable OPENSSL_s390xcap now recognizes the token "nocex" to
prevent offloading.
Signed-off-by: Juergen Christ <jchrist@linux.ibm.com>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20113)
BIO_set_md() can return an error value <= 0 according to my analysis
tool and the documentation. But only an error value == 0 is currently
checked. Fix it by changing the check condition.
CLA: trivial
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Todd Short <todd.short@me.com>
(Merged from https://github.com/openssl/openssl/pull/20195)
Fixes#19975
for CMS_decrypt_set1_pkey_and_peer() in the obvious way,
and a related potential crash in CMS_decrypt_set1_password().
The point is that the input might have an unexpected content type,
so a guard is needed at both places after `ec` is obtained.
Note that in CMS_decrypt_set1_pkey_and_peer() there was
no such ec != NULL guard for
```
if (ris != NULL)
debug = ec->debug;
```
maybe because it is implied here by ris != NULL.
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19981)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Todd Short <todd.short@me.com>
(Merged from https://github.com/openssl/openssl/pull/20205)
Avoid including QUIC related stuff in the FIPS sources.
Also avoid including libssl headers in ssl3_cbc.c.
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19658)
The unused and untested internal function ossl_a2ucompare() has been
removed.
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/20177)
BIO_set_accept_name() can return error values -1 and 0 according to
my analysis tool and the documentation. Documentation says a value of 1
indicates success. Currently, only an error value != 0 is checked which
erroneously interprets a -1 error return value as success.
Fix it by changing the check condition.
CLA: trivial
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Todd Short <todd.short@me.com>
(Merged from https://github.com/openssl/openssl/pull/20206)
Unlike gcc, the clang assembler has issues with the maximum value of the literal
in the `ldr REG, #VALUE` pseudo-instruction (where the assembler places the
value into a literal pool and generates a PC-relative load from that pool) when
used with Neon registers.
Specifically, while dN refers to 64-bit Neon registers, and qN refers to 128-bit
Neon registers, clang assembly only supports a maximum of 32-bit loads to
either with this instruction.
Therefore restrict accordingly to avoid breakage when building with clang.
clang appears to support the correct maximums with the scalar registers xN etc.
This will prevent the kind of breakage we saw when #19914 was merged (which has
since been fixed by #20202) - assembly authors will need to manually apply the
literal load, as is done in #20202.
None of the Arm assembler code uses this pseudo-instruction anyway, as it
doesn't seem to avoid duplication of constants.
Change-Id: If52f6ce22c10feb1cc334d996ff71b1efed3218e
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Todd Short <todd.short@me.com>
(Merged from https://github.com/openssl/openssl/pull/20222)
These calls invoke EVP_DigestInit() which can fail for digests
with implicit fetches. Subsequent EVP_DigestUpdate() from BIO_write()
or EVP_DigestFinal() from BIO_read() will segfault on NULL
dereference. This can be triggered by an attacker providing
PKCS7 data digested with MD4 for example if the legacy provider
is not loaded.
If BIO_set_md() fails the md BIO cannot be used.
CVE-2023-0401
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Fixes CVE-2023-0217
When attempting to do a BN_Copy of params->p there was no NULL check.
Since BN_copy does not check for NULL this is a NULL reference.
As an aside BN_cmp() does do a NULL check, so there are other checks
that fail because a NULL is passed. A more general check for NULL params
has been added for both FFC public and private key validation instead.
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
If the aux->asn1_cb() call fails in BIO_new_NDEF then the "out" BIO will
be part of an invalid BIO chain. This causes a "use after free" when the
BIO is eventually freed.
Based on an original patch by Viktor Dukhovni and an idea from Theo
Buehler.
Thanks to Octavio Galland for reporting this issue.
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
In the event of a failure in PEM_read_bio_ex() we free the buffers we
allocated for the header and data buffers. However we were not clearing
the ptrs stored in *header and *data. Since, on success, the caller is
responsible for freeing these ptrs this can potentially lead to a double
free if the caller frees them even on failure.
Thanks to Dawei Wang for reporting this issue.
Based on a proposed patch by Kurt Roeckx.
CVE-2022-4450
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
A timing based side channel exists in the OpenSSL RSA Decryption
implementation which could be sufficient to recover a plaintext across
a network in a Bleichenbacher style attack. To achieve a successful
decryption an attacker would have to be able to send a very large number
of trial messages for decryption. The vulnerability affects all RSA
padding modes: PKCS#1 v1.5, RSA-OEAP and RSASVE.
Patch written by Dmitry Belyavsky and Hubert Kario
CVE-2022-4304
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
This function assumes that if the "gen" is an OtherName, then the "base"
is a rfc822Name constraint. This assumption is not true in all cases.
If the end-entity certificate contains an OtherName SAN of any type besides
SmtpUtf8Mailbox and the CA certificate contains a name constraint of
OtherName (of any type), then "nc_email_eai" will be invoked, with the
OTHERNAME "base" being incorrectly interpreted as a ASN1_IA5STRING.
Reported by Corey Bonnell from Digicert.
CVE-2022-4203
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20202)
Signed-off-by: Xu Yizhou <xuyizhou1@huawei.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19914)
That function is a wrapper around evp_cipher_param_to_asn1_ex() which
can return 0 as an error value via its ret <= 0 check [1].
Furthermore, all other callers of this function check against <= 0
instead of < 0 and this is also in line with what the documentation
tells us. Fix the incomplete check by changing it to <= 0 as well.
CLA: trivial
[1] 114d99b46b/crypto/evp/evp_lib.c (L164-L165)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20180)
Fix issue #20063.
CLA: trivial
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20163)
If no-module or no-shared is used, the symbols from
libcrypto should not be duplicated in legacy.a
Also the BIGNUM functions are currently not needed
in legacy.a at all.
Fixes#20124
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20137)
X509V3_add1_i2d() can return both -1 and 0 as an error code. This check
only checked for 0. Change it into <= 0 to also catch the -1 error code.
CLA: trivial
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20157)
Gives a performance enhancement of 16-38%, similar to the M1.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20141)
The check is unnecessary as the condition is already checked
before the switch statement.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20121)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/18704)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/18704)
EVP_CIPHER_asn1_to_param() returns a value <= 0 in case of an error, and
a value greater than 0 in case of success. Two callsites only check for
< 0 instead of <= 0. The other callsites perform this check correctly.
Change the two callsites to <= 0. Additionally correctly handle a zero
return value from EVP_CIPHER_get_asn1_iv as success.
Fixes: #20116
CLA: trivial
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/201213)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/19271)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/19271)
The by_dir certificate/CRL lookup code uses an OPENSSL_STACK to track
how many sequentially numbered CRL files have been loaded for a given
X509_NAME hash which is being requested. This avoids loading already
loaded CRL files and repeated stat() calls.
This OPENSSL_STACK is searched using sk_find, however this mutates
the OPENSSL_STACK unless it is known to be sorted. This operation
therefore requires a write lock, which was not taken.
Fix this issue by sorting the OPENSSL_STACK whenever it is mutated. This
guarantees no mutation will occur during sk_find. This is chosen over
taking a write lock during sk_find as retrieving a CRL by X509_NAME is
assumed to be a hotter path than the case where a new CRL is installed.
Also optimise the code by avoiding creating the structure to track the
last CRL file sequence number in the circumstance where it would match
the initial value, namely where no CRL with the given hash is installed.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20076)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/20052)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/19391)
To this end, tweak the internal handling of ctx->total_timeout.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/19391)
RAND_bytes_ex() can also return 0 on failure. Other callers do check
this correctly. Change the check from <0 to <=0.
Fixes: #20100
CLA: trivial
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20106)
Test included
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20033)
This allows calls with s==NULL and len==0 to be safe. It probably already
was, but address sanitizers could still complain.
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20033)
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/20023)
The other implementations of i2r return 0 in case of an error, but
i2r_ADMISSION_SYNTAX() returns -1. That means the check on i2r does not
catch the error. Change it to return 0 like the others do.
Fixes: #20066
CLA: trivial
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20068)
Fixes#19718Fixes#19716
Added PKCS12_SAFEBAG_get1_cert_ex(), PKCS12_SAFEBAG_get1_crl_ex() and
ASN1_item_unpack_ex().
parse_bag and parse_bags now use the libctx/propq stored in the P7_CTX.
PKCS12_free() needed to be manually constructed in order to free the propq.
pkcs12_api_test.c changed so that it actually tests the libctx, propq.
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19942)
Otherwise the alloca can cause an exception.
Issue reported by Jiayi Lin.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Todd Short <todd.short@me.com>
(Merged from https://github.com/openssl/openssl/pull/20005)
Fixes#6277
Description:
Make each of the five EdDSA instances defined in RFC 8032 -- Ed25519,
Ed25519ctx, Ed25519ph, Ed448, Ed448ph -- available via the EVP APIs.
The desired EdDSA instance is specified via an OSSL_PARAM.
All instances, except for Ed25519, allow context strings as input.
Context strings are passed via an OSSL_PARAM. For Ed25519ctx, the
context string must be nonempty.
Ed25519, Ed25519ctx, Ed448 are PureEdDSA instances, which means that
the full message (not a digest) must be passed to sign and verify
operations.
Ed25519ph, Ed448ph are HashEdDSA instances, which means that the input
message is hashed before sign and verify.
Testing:
All 21 test vectors from RFC 8032 have been added to evppkey_ecx.txt
(thanks to Shane Lontis for showing how to do that). Those 21 test
vectors are exercised by evp_test.c and cover all five instances.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/19705)
This is not a big problem for higher level keygen, as these set e
beforehand to a default value. But the logic at the lower level is
incorrect since it was doing a NULL check in one place but then
segfaulting during a later BN_copy().
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Todd Short <todd.short@me.com>
(Merged from https://github.com/openssl/openssl/pull/20025)
The condition evaluation in #if conditions does not tolerate this
if the macro is not defined.
Fixes#19628
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20018)
A zero BIGNUM contains zero bytes, while OSSL_PARAMs with an INTEGER (or
UNSIGNED INTEGER) data type are expected to have at least one data byte
allocated, containing a zero. This wasn't handled correctly.
Fixes#20011
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20013)
This way, we guarantee that a zero is represented with one byte of data
that's set to zero.
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20013)
Fixes: #19996
CLA: trivial
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20001)
Signed-off-by: Xu Yizhou <xuyizhou1@huawei.com>
Reviewed-by: Paul Yang <kaishen.yy@antfin.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19910)
"openssl version -c" may create undefined behavior in the shift:
crypto/info.c:42:50: runtime error: left shift of 4275712515
by 32 places cannot be represented in type 'long long int'
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19668)
The trace code assumes all categories are present and
the category numbers are equal to the index in the table.
Fixes#19915
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/19917)
If the cipher being used in ossl_cms_EncryptedContent_init_bio() has no
associated OID then we should report an error rather than continuing on
regardless. Continuing on still ends up failing - but later on and with a
more cryptic error message.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19918)
Some things that may go wrong in asn1_bio_write() are serious errors
that should be reported as -1, rather than 0 (which just means "we wrote
no data").
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19918)
If the BIO unexpectedly fails to flush then SMIME_crlf_copy() was not
correctly reporting the error. We modify it to properly propagate the
error condition.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19918)
If an error occurs during a flush on a BIO_f_cipher() then in some cases
we could get into an infinite loop. We add a check to make sure we are
making progress during flush and exit if not.
This issue was reported by Octavio Galland who also demonstrated an
infinite loop in CMS encryption as a result of this bug.
The security team has assessed this issue as not a CVE. This occurs on
*encryption* only which is typically processing trusted data. We are not
aware of a way to trigger this with untrusted data.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19918)
The code path for this resource leak indicates that this is a false
positive (if you look at the callers).
Rather than ignoring the warning an extra check has been added, in case
future callers do the wrong thing.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19799)
We already permit this in crypto/objects/objects.txt, but not programatically,
although being able to do so programatically would be beneficial.
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19876)
The internal error reason is confusing and indicating an error
in OpenSSL and not a configuration problem.
Fixes#19867
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19875)
Fixes#19858
During decryption, the last ciphertext is not fed to next block
correctly when the number of input blocks is exactly 4. Fix this
and add the corresponding test cases.
Thanks xu-yi-zhou for reporting this issue and proposing the fix.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19872)
Signed-off-by: Čestmír Kalina <ckalina@redhat.com>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19823)
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/13817)
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/13817)
The RSA decryption as implemented before required very careful handling
of both the exit code returned by OpenSSL and the potentially returned
ciphertext. Looking at the recent security vulnerabilities
(CVE-2020-25659 and CVE-2020-25657) it is unlikely that most users of
OpenSSL do it correctly.
Given that correct code requires side channel secure programming in
application code, we can classify the existing RSA decryption methods
as CWE-676, which in turn likely causes CWE-208 and CWE-385 in
application code.
To prevent that, we can use a technique called "implicit rejection".
For that we generate a random message to be returned in case the
padding check fails. We generate the message based on static secret
data (the private exponent) and the provided ciphertext (so that the
attacker cannot determine that the returned value is randomly generated
instead of result of decryption and de-padding). We return it in case
any part of padding check fails.
The upshot of this approach is that then not only is the length of the
returned message useless as the Bleichenbacher oracle, so are the
actual bytes of the returned message. So application code doesn't have
to perform any operations on the returned message in side-channel free
way to remain secure against Bleichenbacher attacks.
Note: this patch implements a specific algorithm, shared with Mozilla
NSS, so that the attacker cannot use one library as an oracle against the
other in heterogeneous environments.
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/13817)
This reverts commit 9aa4be691f and removed the
redundant flag setting.
Fixes#19643
Fixes LOW CVE-2022-3996
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19652)
FIPS 186-4 section 5 "The RSA Digital Signature Algorithm", subsection
5.5 "PKCS #1" says: "For RSASSA-PSS […] the length (in bytes) of the
salt (sLen) shall satisfy 0 <= sLen <= hLen, where hLen is the length of
the hash function output block (in bytes)."
Introduce a new option RSA_PSS_SALTLEN_AUTO_DIGEST_MAX and make it the
default. The new value will behave like RSA_PSS_SALTLEN_AUTO, but will
not use more than the digest length when signing, so that FIPS 186-4 is
not violated. This value has two advantages when compared with
RSA_PSS_SALTLEN_DIGEST: (1) It will continue to do auto-detection when
verifying signatures for maximum compatibility, where
RSA_PSS_SALTLEN_DIGEST would fail for other digest sizes. (2) It will
work for combinations where the maximum salt length is smaller than the
digest size, which typically happens with large digest sizes (e.g.,
SHA-512) and small RSA keys.
J.-S. Coron shows in "Optimal Security Proofs for PSS and Other
Signature Schemes. Advances in Cryptology – Eurocrypt 2002, volume 2332
of Lecture Notes in Computer Science, pp. 272 – 287. Springer Verlag,
2002." that longer salts than the output size of modern hash functions
do not increase security: "For example,for an application in which at
most one billion signatures will be generated, k0 = 30 bits of random
salt are actually sufficient to guarantee the same level of security as
RSA, and taking a larger salt does not increase the security level."
Signed-off-by: Clemens Lang <cllang@redhat.com>
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19724)
Rather than computing the PSS salt length again in core using
ossl_rsa_ctx_to_pss_string, which calls rsa_ctx_to_pss and computes the
salt length, obtain it from the provider using the
OSSL_SIGNATURE_PARAM_ALGORITHM_ID param to handle the case where the
interpretation of the magic constants in the provider differs from that
of OpenSSL core.
Add tests that verify that the rsa_pss_saltlen:max,
rsa_pss_saltlen:<integer> and rsa_pss_saltlen:digest options work and
put the computed digest length into the CMS_ContentInfo struct when
using CMS. Do not add a test for the salt length generated by a provider
when no specific rsa_pss_saltlen option is defined, since that number
could change between providers and provider versions, and we want to
preserve compatibility with older providers.
Signed-off-by: Clemens Lang <cllang@redhat.com>
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19724)
Do not accept password-based if expected signature-based and no secret is available and
do not accept signature-based if expected password-based and no trust anchors available.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/19729)
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/16006)
Fixes openssl#19771
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19787)
In addition to a missing prototype there was also a missing closing brace '}'.
Fixes#19825.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19833)
Fetch the EVP_CIPHER for aead in OSSL_HPKE_CTX_new()
to avoid re-fetching on each aead operation.
Save kem/kdf/aead_info in OSSL_HPKE_CTX.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/19784)
pthread_cancel() is never called by OpenSSL. Therefore this is no point in
setting the cancel state/type. The functions to set the cancel state/type
are not supported on Android and result in compilation failures. Therefore
we remove these calls completely.
Fixes#19559
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19779)
This PR is based off the contributions in PR #9223 by Jemmy1228.
It has been modified and reworked to:
(1) Work with providers
(2) Support ECDSA and DSA
(3) Add a KDF HMAC_DRBG implementation that shares code with the RAND HMAC_DRBG.
A nonce_type is passed around inside the Signing API's, in order to support any
future deterministic algorithms.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18809)
ftmp4 is assigned immediately before receiving the reduced output of the
multiplication of ftmp and ftmp3, without being read inbetween these
assignments. Remove redundant assignment.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19766)
Signed-off-by: Xu Yizhou <xuyizhou1@huawei.com>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19619)
Add the following OID:
SM4-XTS: 1.2.156.10197.1.104.10
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19619)
Originally the code to im/export the EC pubkey was meant to be consumed
only by the im/export functions when crossing the provider boundary.
Having our providers exporting to a COMPRESSED format octet string made
sense to avoid memory waste, as it wasn't exposed outside the provider
API, and providers had all tools available to convert across the three
formats.
Later on, with #13139 deprecating the `EC_KEY_*` functions, more state
was added among the params imported/exported on an EC provider-native
key (including `OSSL_PKEY_PARAM_EC_POINT_CONVERSION_FORMAT`, although it
did not affect the format used to export `OSSL_PKEY_PARAM_PUB_KEY`).
Finally, in #14800, `EVP_PKEY_todata()` was introduced and prominently
exposed directly to users outside the provider API, and the choice of
COMPRESSED over UNCOMPRESSED as the default became less sensible in
light of usability, given the latter is more often needed by
applications and protocols.
This commit fixes it, by using `EC_KEY_get_conv_form()` to get the
point format from the internal state (an `EC_KEY` under the hood) of the
provider-side object, and using it on
`EVP_PKEY_export()`/`EVP_PKEY_todata()` to format
`OSSL_PKEY_PARAM_PUB_KEY`.
The default for an `EC_KEY` was already UNCOMPRESSED, and it is altered
if the user sets `OSSL_PKEY_PARAM_EC_POINT_CONVERSION_FORMAT` via
`EVP_PKEY_fromdata()`, `EVP_PKEY_set_params()`, or one of the
more specialized methods.
For symmetry, this commit also alters `ec_pkey_export_to()` in
`crypto/ec/ec_ameth.c`, part of the `EVP_PKEY_ASN1_METHOD` for legacy EC
keys: it exclusively used COMPRESSED format, and now it honors the
conversion format specified in the EC_KEY object being exported to a
provider when this function is called.
Expand documentation about `OSSL_PKEY_PARAM_PUB_KEY` and mention the
3.1 change in behavior for our providers.
Fixes#16595
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19681)
(cherry picked from commit 926db476bc)
CID 1517043 and 1517038: (Forward NULL) - Removed redundant check that is already
done by the caller. It was complaining that it checked for ctlen == NULL
and then did a goto that used this *ctlen.
CID 1517042 and 1517041: (Forward NULL) - Similar to above for ptlen in
hpke_aead_dec()
CID 1517040: Remove unneeded logging. This gets rid of the warning
related to taking the sizeof(&)
CID 1517039: Check returned value of RAND_bytes_ex() in hpke_test
CID 1517038: Check return result of KEM_INFO_find() in
OSSL_HPKE_get_recomended_ikmelen. Even though this is a false positive,
it should not rely on the internals of other function calls.
Changed some goto's into returns to match OpenSSL coding guidelines.
Removed Raises from calls to _new which fail from malloc calls.
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19774)
Fixes#18631
The store lock does not prevent concurrent access to the
property cache, because there are multiple stores.
We drop the newly created entry and use the exisiting one
if there is one already.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19762)
Comments in felem_inv refer to the logarithm with respect to in of the
element that has just been computed. The last two such annotations are
incorrect. By Fermat's last theorem, we hope to compute in^(p-2) in
GF(2^521-1), as such we expect the final index we reach to be 2^521-3.
CLA: Trivial
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19765)
This supports all the modes, suites and export mechanisms defined
in RFC9180 and should be relatively easily extensible if/as new
suites are added. The APIs are based on the pseudo-code from the
RFC, e.g. OSS_HPKE_encap() roughly maps to SetupBaseS(). External
APIs are defined in include/openssl/hpke.h and documented in
doc/man3/OSSL_HPKE_CTX_new.pod. Tests (test/hpke_test.c) include
verifying a number of the test vectors from the RFC as well as
round-tripping for all the modes and suites. We have demonstrated
interoperability with other HPKE implementations via a fork [1]
that implements TLS Encrypted ClientHello (ECH) which uses HPKE.
@slontis provided huge help in getting this done and this makes
extensive use of the KEM handling code from his PR#19068.
[1] https://github.com/sftcd/openssl/tree/ECH-draft-13c
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/17172)
Fixes#19498
However the private key part is not optional which was
mishandled by the legacy routine.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19505)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/19216)
Otherwise, further OSSL_CMP_exec_GENM_ses() calls will go wrong.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/19216)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/19216)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/19222)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/19222)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/19222)
There is no reason preventing this API to support SM2,
which gives us a simple method to do SM2 key gen.
CLA: trivial
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19736)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Todd Short <todd.short@me.com>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/19205)
On this occasion, replace magic constants by mnemonic ones; update doc
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Todd Short <todd.short@me.com>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/19205)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/19230)
TLS device offload allows to perform zerocopy sendfile transmissions.
FreeBSD provides this feature by default, and Linux 5.19 introduced it
as an opt-in. Zerocopy improves the TX rate significantly, but has a
side effect: if the underlying file is changed while being transmitted,
and a TCP retransmission happens, the receiver may get a TLS record
containing both new and old data, which leads to an authentication
failure and termination of connection. This effect is the reason Linux
makes a copy on sendfile by default.
This commit adds support for TLS zerocopy sendfile on Linux disabled by
default to avoid any unlikely backward compatibility issues on Linux,
although sacrificing consistency in OpenSSL's behavior on Linux and
FreeBSD. A new option called KTLSTxZerocopySendfile is added to enable
the new zerocopy behavior on Linux. This option should be used when the
the application guarantees that the file is not modified during
transmission, or it doesn't care about breaking the connection.
The related documentation is also added in this commit. The unit test
added doesn't test the actual functionality (it would require specific
hardware and a non-local peer), but solely checks that it's possible to
set the new option flag.
Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Boris Pismenny <borisp@nvidia.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Todd Short <todd.short@me.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18650)
an assembler for Windows on Arm builds and also clang-cl as the compiler
as well. Make appropriate changes to armcap source and peralsm scripts.
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19523)
And so clean a few useless includes
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19721)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/19715)
Reduce the Miller Rabin counts to the values specified by FIPS 186-5.
The old code was using a fixed value of 64.
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19579)
FIPS 186-4 has 5 different algorithms for key generation,
and all of them rely on testing GCD(a,n) == 1 many times.
Cachegrind was showing that during a RSA keygen operation,
the function BN_gcd() was taking a considerable percentage
of the total cycles.
The default provider uses multiprime keygen, which seemed to
be much faster. This is because it uses BN_mod_inverse()
instead.
For a 4096 bit key, the entropy of a key that was taking a
long time to generate was recorded and fed back into subsequent
runs. Roughly 40% of the cycle time was BN_gcd() with most of the
remainder in the prime testing. Changing to use the inverse
resulted in the cycle count being 96% in the prime testing.
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19578)
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19656)
The values don't match those in include/openssl/sslerr.h
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19688)
EVP_PKEY_eq() is used to check, among other things, if a certificate
public key corresponds to a private key. When the private key belongs to
a provider that does not allow to export private keys this currently
fails as the internal functions used to import/export keys ignored the
selection given (which specifies that only the public key needs to be
considered) and instead tries to export everything.
This patch allows to propagate the selection all the way down including
adding it in the cache so that a following operation actually looking
for other selection parameters does not mistakenly pick up an export
containing only partial information.
Signed-off-by: Simo Sorce <simo@redhat.com>
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19648)
I chose to just hide this behind '#ifndef __DJGPP__', instead of listing
all the macro combinations where it *is* used. That would make quite a
mess.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19322)
This matches the declaration in <openssl/crypto.h>.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19322)
This causes a warning otherwise when socklen_t is signed (Watt32).
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19322)
For some reason djgpp uses '(unsigned) long int' for (u)int32_t. This
causes errors with -Werror=format, even though these types are in
practice identical.
Obvious solution: cast to the types indicated by the format string.
For asn1_time_test.c I changed the format string to %lli since time_t
may be 'long long' some platforms.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19322)
Add test for `.' overflows, remove the output size argument from
ossl_a2ulabel() since it was never used and greatly complicated the code.
Convert ossl_a2ulabel() to use WPACKET for building the output string.
Update the documentation to match the new definition of ossl_a2ulabel().
x509: let punycode handle the '\0' string termination. Saves a memset(3)
and some size fiddling. Also update to deal with the modified parameters.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/19591)
Make the code more robust and correctly handle EVP_PKEY set to NULL
instead of dereferencing null pointer.
Signed-off-by: Milan Broz <gmazyland@gmail.com>
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19536)
The copy of PKEY should be released on the error path.
Easily reproduced with "ED448" context.
Signed-off-by: Milan Broz <gmazyland@gmail.com>
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19536)
Otherwise the powerbufLen can overflow.
Issue reported by Jiayi Lin.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/19632)
CLA: trivial
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19608)
The use case is that uppercase .ASM extension may be used on some platforms,
and we were only testing for the lowercase extension.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/19604)
