This change is for feature request #21679.
Adds a couple of setters to aid with custom CRL validation.
Reviewed-by: Todd Short <todd.short@me.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21737)
Fixes#21198
decoder objects were setting propq as NULL.
Added a set_ctx/settable_ctx to all decoders that should supply
a property query parameter to internal functions.
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21219)
Also fixes a similar regression in X509_VERIFY_PARAM_add0_table().
Commit 38ebfc3 introduced a regression in 3.0.6 that changed the return
value of the two functions above from 1 on success to the number of entries
in the stack. If there are more than one entry then this is a change in
behaviour which should not have been introduced into a stable release.
This reverts the behaviour back to what it was prior to the change. The code
is slightly different to the original code in that we also handle a possible
-1 return value from the stack push function. This should never happen in
reality because we never pass a NULL stack as a parameter - but for the sake
of robustness we handle it anyway.
Note that the changed behaviour exists in all versions of 3.1 (it never had
the original version). But 3.1 should be fully backwards compatible with 3.0
so we should change it there too.
Fixes#21570
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tom Cosgrove <tom.cosgrove@arm.com>
(Merged from https://github.com/openssl/openssl/pull/21576)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Tom Cosgrove <tom.cosgrove@arm.com>
Reviewed-by: Todd Short <todd.short@me.com>
(Merged from https://github.com/openssl/openssl/pull/21545)
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tom Cosgrove <tom.cosgrove@arm.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21515)
Function `X509at_add1_attr()` (crypto/x509/x509_att.c) rejects to add a duplicity into `*x` but it searches in a wrong stack.
Changed to search in `*x`.
CLA: trivial
Reviewed-by: Kurt Roeckx <kurt@roeckx.be>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21505)
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21190)
Typos in doc/man* will be fixed in a different commit.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20910)
This can effectively reduce the binary size for platforms
that don't need ECX feature(~100KB).
Signed-off-by: Yi Li <yi1.li@intel.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20781)
A few ERR_raise() calls in v3_purp.c use the wrong library. For example,
in OpenSSL 3.1.1 we get
00000000:error:0580009E:x509 certificate routines:ossl_x509v3_cache_extensions:reason(158):crypto/x509/v3_purp.c:635:
instead of
00000000:error:1100009E:X509 V3 routines:ossl_x509v3_cache_extensions:invalid certificate:crypto/x509/v3_purp.c:635:
Reviewed-by: Todd Short <todd.short@me.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21168)
ossl_x509_store_ctx_get_by_subject() was taking a write lock for the
store, but was only (usually) retrieving a value from the stack of
objects. We take a read lock instead.
Partially fixes#20286
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20952)
The invocation of ossl_policy_level_add_node in tree_calculate_user_set
did not have any error handling. Add it to prevent a memory leak for the
allocated extra policy data.
Also add error handling to sk_X509_POLICY_NODE_push to ensure that if
a new node was allocated, but could not be added to the stack, it is
freed correctly.
Fix error handling if tree->user_policies cannot be allocated by
returning 0, indicating failure, rather than 1.
Signed-off-by: Clemens Lang <cllang@redhat.com>
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21040)
ossl_policy_level_add_node() first adds the new node to the level->nodes
stack, and then attempts to add extra data if extra_data is true. If
memory allocation or adding the extra data to tree->extra_data fails,
the allocated node (that has already been added to the level->nodes
stack) is freed using ossl_policy_node_free(), which leads to
a potential use after free.
Additionally, the tree's node count and the parent's child count would
not be updated, despite the new node being added.
Fix this by either performing the function's purpose completely, or not
at all by reverting the changes on error.
Signed-off-by: Clemens Lang <cllang@redhat.com>
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21040)
x509_trust.c, x509_vpm.c and v3_lib.c don't have a lock for their sorts.
This is no worse than the existing code which sorted silently without locks.
Addition is quadratic time in by_dir.c and v3_purp.c. However, this
is an improvement over the older O(n^2 log n) code where each find also
sorted the stack. Also note that v3_purp.c is limited to a maximum of
10 items, so quadratic behaviour isn't terrible.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Todd Short <todd.short@me.com>
(Merged from https://github.com/openssl/openssl/pull/20842)
According to docs, EVP_PKEY_get_int_param should return 1 on Success, and
0 on Failure. So, fix checking of this return value at check_curve
CLA: trivial
Reviewed-by: Todd Short <todd.short@me.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20770)
Add support for the RFC7250 certificate-type extensions.
Alows the use of only private keys for connection (i.e. certs not needed).
Add APIs
Add unit tests
Add documentation
Add s_client/s_server support
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18185)
Even though we check the leaf cert to confirm it is valid, we
later ignored the invalid flag and did not notice that the leaf
cert was bad.
Fixes: CVE-2023-0465
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20585)
A security vulnerability has been identified in all supported versions
of OpenSSL related to the verification of X.509 certificate chains
that include policy constraints. Attackers may be able to exploit this
vulnerability by creating a malicious certificate chain that triggers
exponential use of computational resources, leading to a denial-of-service
(DoS) attack on affected systems.
Fixes CVE-2023-0464
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/20571)
This function assumes that if the "gen" is an OtherName, then the "base"
is a rfc822Name constraint. This assumption is not true in all cases.
If the end-entity certificate contains an OtherName SAN of any type besides
SmtpUtf8Mailbox and the CA certificate contains a name constraint of
OtherName (of any type), then "nc_email_eai" will be invoked, with the
OTHERNAME "base" being incorrectly interpreted as a ASN1_IA5STRING.
Reported by Corey Bonnell from Digicert.
CVE-2022-4203
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/19271)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/19271)
The by_dir certificate/CRL lookup code uses an OPENSSL_STACK to track
how many sequentially numbered CRL files have been loaded for a given
X509_NAME hash which is being requested. This avoids loading already
loaded CRL files and repeated stat() calls.
This OPENSSL_STACK is searched using sk_find, however this mutates
the OPENSSL_STACK unless it is known to be sorted. This operation
therefore requires a write lock, which was not taken.
Fix this issue by sorting the OPENSSL_STACK whenever it is mutated. This
guarantees no mutation will occur during sk_find. This is chosen over
taking a write lock during sk_find as retrieving a CRL by X509_NAME is
assumed to be a hotter path than the case where a new CRL is installed.
Also optimise the code by avoiding creating the structure to track the
last CRL file sequence number in the circumstance where it would match
the initial value, namely where no CRL with the given hash is installed.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20076)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/20052)
The other implementations of i2r return 0 in case of an error, but
i2r_ADMISSION_SYNTAX() returns -1. That means the check on i2r does not
catch the error. Change it to return 0 like the others do.
Fixes: #20066
CLA: trivial
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20068)
This reverts commit 9aa4be691f and removed the
redundant flag setting.
Fixes#19643
Fixes LOW CVE-2022-3996
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19652)
Add test for `.' overflows, remove the output size argument from
ossl_a2ulabel() since it was never used and greatly complicated the code.
Convert ossl_a2ulabel() to use WPACKET for building the output string.
Update the documentation to match the new definition of ossl_a2ulabel().
x509: let punycode handle the '\0' string termination. Saves a memset(3)
and some size fiddling. Also update to deal with the modified parameters.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/19591)
These functions pass a library content and prop query.
The i2d documentation related to these functions has been corrected since the bio and fp functions always return 0 or 1.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18427)
The value of 'l' isn't ever actually used.
Fixes this error with Clang 15:
```
crypto/x509/x_name.c:506:9: error: variable 'l' set but not used [-Werror,-Wunused-but-set-variable]
int l, i;
^
1 error generated.
```
Signed-off-by: Sam James <sam@gentoo.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19450)
partially revamped from #16712
- fall thru -> fall through
- time stamp -> timestamp
- host name -> hostname
- ipv6 -> IPv6
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19059)
This fixes regression from commit 8e39049. There is also no point
in setting the modified flag after just calling i2d.
Fixes#19297
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/19299)
Since OPENSSL_malloc() and friends report ERR_R_MALLOC_FAILURE, and
at least handle the file name and line number they are called from,
there's no need to report ERR_R_MALLOC_FAILURE where they are called
directly, or when SSLfatal() and RLAYERfatal() is used, the reason
`ERR_R_MALLOC_FAILURE` is changed to `ERR_R_CRYPTO_LIB`.
There were a number of places where `ERR_R_MALLOC_FAILURE` was reported
even though it was a function from a different sub-system that was
called. Those places are changed to report ERR_R_{lib}_LIB, where
{lib} is the name of that sub-system.
Some of them are tricky to get right, as we have a lot of functions
that belong in the ASN1 sub-system, and all the `sk_` calls or from
the CRYPTO sub-system.
Some extra adaptation was necessary where there were custom OPENSSL_malloc()
wrappers, and some bugs are fixed alongside these changes.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19301)
