The PKCS5 (RFC 8018) standard uses a 64 bit salt length for PBE, and
recommends a minimum of 64 bits for PBES2. For FIPS compliance PBKDF2
requires a salt length of 128 bits.
This affects OpenSSL command line applications such as "genrsa" and "pkcs8"
and API's such as PEM_write_bio_PrivateKey() that are reliant on the
default salt length.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21858)
clang-cl.exe defines __clang__ and _MSC_VER but not __GNUC__, so a clang-
specific guard is needed to get the correct ALIGNxx versions.
Fixes#21914
Change-Id: Icdc047b182ad1ba61c7b1b06a1e951eda1a0c33d
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21921)
This affects some Poly1305 assembler functions
which are only used for certain CPU types.
Remove those functions for Windows targets,
as a simple interim solution.
Fixes#21522
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21808)
This code was added in error and is entirely redundant. It is also an
expensive operation (e.g. see #21833).
Fixes#21834
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21902)
Assembly acceleration secp384r1 opts to not use any callee-save VSRs, as
VSX enabled systems make extensive use of renaming, and so writebacks in
felem_{mul,square}() can be reordered for best cache effects.
Remove stack allocations. This in turn fixes unmatched push/pops in
felem_{mul,square}().
Signed-off-by: Rohan McLure <rohan.mclure@linux.ibm.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21749)
OPENSSL_init_crypto() with OPENSSL_INIT_LOAD_CONFIG must load the configuration
into the initial global default library context, not the currently set default
library context.
OPENSSL_init_crypto() with OPENSSL_INIT_LOAD_CONFIG may be called within other
OpenSSL API functions, e.g. from within EVP_PKEY_CTX_new_xxx() when initializing
a pkey context, to perform implicit initialization, if it has not been
initialized yet. This implicit initialization may happen at a time when an
application has already create its own library context and made it the default
library context. So loading the config into the current default library context
would load it into the applications library context.
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21897)
Popping the $output argument is more robust and it also needs to be
placed in double quotes to handle spaces in paths.
Fixes#21874Fixes#21876
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Tom Cosgrove <tom.cosgrove@arm.com>
(Merged from https://github.com/openssl/openssl/pull/21877)
The assembler will complain when we include loongarch_arch.h in
an assembly file as following:
crypto/loongarch_arch.h: Assembler messages:
crypto/loongarch_arch.h:12: Fatal error: no match insn: extern unsigned int OPENSSL_loongarch_hwcap_P
So, the sentence of `extern unsigned int OPENSSL_loongarch_hwcap_P`
should be guarded with "#ifndef __ASSEMBLER__".
Fixes#21838.
Signed-off-by: Min Zhou <zhoumin@loongson.cn>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21839)
This is used to calculate the TSA's public key certificate identifier.
The default algorithm is changed from sha1 to sha256.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21794)
Treat keys with EVP_PKEY_RSA_PSS the same as EVP_PKEY_RSA in EVP_PKEY_can_sign()
and detect_foreign_key() which is called by EVP_PKEY_assign().
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21819)
The get_rsa_payload_x() functions should also allow to get the payload
for RSA-PSS keys.
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21818)
Controls 'rsa_keygen_pubexp' and 'rsa_keygen_primes' should also be allowed
for RSA-PSS keys.
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21818)
This improves tracking where the failure was triggered.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21700)
Make sure we free the stack of names we allocated in an error path.
Found by the reproducible error patch in #21668
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/21796)
This really cannot be ever called with NULL store_ctx
and the check confuses Coverity.
Fixes Coverity 1538865
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21755)
This change is for feature request #21679.
Adds a couple of setters to aid with custom CRL validation.
Reviewed-by: Todd Short <todd.short@me.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21737)
Make sure we free process_data_dest if it is not actually used.
Found by the reproducible error patch in #21668
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Tom Cosgrove <tom.cosgrove@arm.com>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21741)
issue: https://github.com/openssl/openssl/issues/21718
build break reported:
crypto/threads_pthread.c:76:5: warning: implicit declaration of function 'pthread_mutexattr_settype'; did you mean 'pthread_mutexattr_destroy'? [-Wimplicit-function-declaration]
76 | pthread_mutexattr_settype(&attr, PTHREAD_MUTEX_NORMAL);
| ^~~~~~~~~~~~~~~~~~~~~~~~~
| pthread_mutexattr_destroy
crypto/threads_pthread.c:76:38: error: 'PTHREAD_MUTEX_NORMAL' undeclared (first use in this function); did you mean 'PTHREAD_MUTEX_TIMED_NP'?
76 | pthread_mutexattr_settype(&attr, PTHREAD_MUTEX_NORMAL);
| ^~~~~~~~~~~~~~~~~~~~
| PTHREAD_MUTEX_TIMED_NP
This occurs because PTHREAD_MUTEX_NORMAL is only defined in glibc if
__USE_UNIX98 or __USE_XOPEN2K8 is defined, which is derived from setting
__USE_POSIX_C_SOURCE or __XOPEN_SOURCE is selected in the glibc feature
set for a build. Since openssl selects no specific feature set from
glibc, the build break occurs
We could select a feature set of course, but that seems like a
significant discussion to have prior to doing so. Instead, the simpler
solution is to just not set the mutex type at all, given that
pthread_mutexattr_init sets the default mutex type, which should be akin
to normal anyway (i.e. no mutex error checking or allowed-recursive
behavior)
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21726)
Fixes#21198
decoder objects were setting propq as NULL.
Added a set_ctx/settable_ctx to all decoders that should supply
a property query parameter to internal functions.
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21219)
Found via the reproducible error injection in #21668
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Tom Cosgrove <tom.cosgrove@arm.com>
(Merged from https://github.com/openssl/openssl/pull/21723)
The routines declared in there are entirely libcrypto internal, so
include/crypto/decoder.h is better suited for them.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/21733)
bn_wexpand can fail as the result of a memory allocation failure. We
should not be calling ossl_assert() on its result because it can fail in
normal operation.
Found via the reproducible error injection in #21668
Reviewed-by: Tom Cosgrove <tom.cosgrove@arm.com>
Reviewed-by: Kurt Roeckx <kurt@roeckx.be>
(Merged from https://github.com/openssl/openssl/pull/21725)
A recursive OPENSSL_init_crypto(OPENSSL_INIT_LOAD_CRYPTO_STRINGS) call
may happen if an out-of-memory error happens at the first callstack,
and the dead-lock happens at the second callstack, because ossl_err_get_state_int
calls OPENSSL_init_crypto(OPENSSL_INIT_LOAD_CRYPTO_STRINGS) although that
call is currently already executing.
At least on posix system this causes the process to freeze at this
point, and must be avoided whatever it takes.
The fix is using err_shelve_state around the critical region, which
makes ossl_err_get_state_int return early and not call the recursive
OPENSSL_init_crypto(OPENSSL_INIT_LOAD_CRYPTO_STRINGS).
This can be reproduced with my error injection patch.
The test vector has been validated on the master branch:
$ ERROR_INJECT=1692279870 ../util/shlib_wrap.sh ./asn1parse-test ./corpora/asn1parse/027f6e82ba01d9db9a9167b83e56cc9f2c602550
ERROR_INJECT=1692279870
#0 0x7f280b42fef8 in __sanitizer_print_stack_trace ../../../../src/libsanitizer/asan/asan_stack.cpp:86
#1 0x5610a3f396b4 in my_malloc fuzz/test-corpus.c:114
#2 0x7f280a2eb94c in CRYPTO_malloc crypto/mem.c:177
#3 0x7f280a2dafdb in OPENSSL_LH_insert crypto/lhash/lhash.c:114
#4 0x7f280a1c87fe in err_load_strings crypto/err/err.c:264
#5 0x7f280a1c87fe in err_load_strings crypto/err/err.c:259
#6 0x7f280a1c87fe in ERR_load_strings_const crypto/err/err.c:301
#7 0x7f280a6f513b in ossl_err_load_PROV_strings providers/common/provider_err.c:233
#8 0x7f280a1cf015 in ossl_err_load_crypto_strings crypto/err/err_all.c:109
#9 0x7f280a2e9b8c in ossl_init_load_crypto_strings crypto/init.c:190
#10 0x7f280a2e9b8c in ossl_init_load_crypto_strings_ossl_ crypto/init.c:181
#11 0x7f2808cfbf67 (/lib/x86_64-linux-gnu/libc.so.6+0x99f67)
#12 0x7f280a32301e in CRYPTO_THREAD_run_once crypto/threads_pthread.c:154
#13 0x7f280a2ea1da in OPENSSL_init_crypto crypto/init.c:553
#14 0x5610a3f38e2f in FuzzerInitialize fuzz/asn1parse.c:29
#15 0x5610a3f38783 in main fuzz/test-corpus.c:194
#16 0x7f2808c8bd8f (/lib/x86_64-linux-gnu/libc.so.6+0x29d8f)
#17 0x7f2808c8be3f in __libc_start_main (/lib/x86_64-linux-gnu/libc.so.6+0x29e3f)
#18 0x5610a3f38d34 in _start (/home/runner/work/openssl/openssl/fuzz/asn1parse-test+0x3d34)
AddressSanitizer:DEADLYSIGNAL
=================================================================
==27629==ERROR: AddressSanitizer: ABRT on unknown address 0x03e900006e23 (pc 0x7f2808cfbef8 bp 0x7f280b36afe0 sp 0x7ffd545b2460 T0)
#0 0x7f2808cfbef8 (/lib/x86_64-linux-gnu/libc.so.6+0x99ef8)
#1 0x7f280a32301e in CRYPTO_THREAD_run_once crypto/threads_pthread.c:154
#2 0x7f280a2ea1da in OPENSSL_init_crypto crypto/init.c:553
#3 0x7f280a1c935e in ossl_err_get_state_int crypto/err/err.c:705
#4 0x7f280a1cf1f9 in ERR_new crypto/err/err_blocks.c:20
#5 0x7f280a2eb9ac in CRYPTO_malloc crypto/mem.c:205
#6 0x7f280a2dafdb in OPENSSL_LH_insert crypto/lhash/lhash.c:114
#7 0x7f280a1c87fe in err_load_strings crypto/err/err.c:264
#8 0x7f280a1c87fe in err_load_strings crypto/err/err.c:259
#9 0x7f280a1c87fe in ERR_load_strings_const crypto/err/err.c:301
#10 0x7f280a6f513b in ossl_err_load_PROV_strings providers/common/provider_err.c:233
#11 0x7f280a1cf015 in ossl_err_load_crypto_strings crypto/err/err_all.c:109
#12 0x7f280a2e9b8c in ossl_init_load_crypto_strings crypto/init.c:190
#13 0x7f280a2e9b8c in ossl_init_load_crypto_strings_ossl_ crypto/init.c:181
#14 0x7f2808cfbf67 (/lib/x86_64-linux-gnu/libc.so.6+0x99f67)
#15 0x7f280a32301e in CRYPTO_THREAD_run_once crypto/threads_pthread.c:154
#16 0x7f280a2ea1da in OPENSSL_init_crypto crypto/init.c:553
#17 0x5610a3f38e2f in FuzzerInitialize fuzz/asn1parse.c:29
#18 0x5610a3f38783 in main fuzz/test-corpus.c:194
#19 0x7f2808c8bd8f (/lib/x86_64-linux-gnu/libc.so.6+0x29d8f)
#20 0x7f2808c8be3f in __libc_start_main (/lib/x86_64-linux-gnu/libc.so.6+0x29e3f)
#21 0x5610a3f38d34 in _start (/home/runner/work/openssl/openssl/fuzz/asn1parse-test+0x3d34)
AddressSanitizer can not provide additional info.
SUMMARY: AddressSanitizer: ABRT (/lib/x86_64-linux-gnu/libc.so.6+0x99ef8)
==27629==ABORTING
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Tom Cosgrove <tom.cosgrove@arm.com>
(Merged from https://github.com/openssl/openssl/pull/21683)
CLA: trivial
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tom Cosgrove <tom.cosgrove@arm.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21692)
This happens if this function is called for signed content.
Added ossl_cms_env_enc_content_free() for cleaning enveloped content.
Fixed indentation in ossl_cms_env_enc_content_free
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21676)
This fixes the reported crashes 32-bit HPUX systems due to
raw out and inp pointer values, and adds one nop instruction
on 64-bit systems, like it is done in other assembly modules
for those systems.
The fix was tested by @johnkohl-hcl see:
https://github.com/openssl/openssl/issues/17067#issuecomment-1668468033Fixes#17067
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21681)
When $label == "0", $label is not truthy, so `if ($label)` thinks there isn't
a label. Correct this by looking at the result of the s/// command.
Verified that there are no changes in the .S files created during a normal
build, and that the "0:" labels appear in the translation given in the error
report (and they are the only difference in the before and after output).
Fixes#21647
Change-Id: I5f2440100c62360bf4bdb7c7ece8dddd32553c79
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21653)
