This patch adds support for the Linux TLS Rx socket option.
It completes the previous patch for TLS Tx offload.
If the socket option is successful, then the receive data-path of the TCP
socket is implemented by the kernel.
We choose to set this option at the earliest - just after CCS is complete.
Change-Id: I59741e04d89dddca7fb138e88fffcc1259b30132
Signed-off-by: Boris Pismenny <borisp@mellanox.com>
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7848)
Add support for Linux TLS Rx offload in the BIO layer.
Change-Id: I79924b25dd290a873d69f6c8d429e1f5bb2c3365
Signed-off-by: Boris Pismenny <borisp@mellanox.com>
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7848)
Introduce the infrastructure for supproting receive side Linux Kernel TLS
data-path.
Change-Id: I71864d8f9d74a701cc8b0ad5536005f3c1716c1c
Signed-off-by: Boris Pismenny <borisp@mellanox.com>
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7848)
'no-dso' is meaningless, as it doesn't get any macro defined.
Therefore, we remove all checks of OPENSSL_NO_DSO. However, there may
be some odd platforms with no DSO scheme. For those, we generate the
internal macro DSO_NONE aand use it.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/#8622)
It seems more intuitive to set `OPENSSL_TRACE=all` instead of
`OPENSSL_TRACE=any` to obtain trace output for all categories.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/8552)
Previously, if the openssl application was run with OPENSSL_TRACE=any,
all trace output would just show 'ANY' as the category name, which was
not very useful. To get the correct category name printed in the trace
output, the openssl application now registers separate channels for
each category.
The trace API is unchanged, it is still possible for an application to
register a single channel for the 'ANY' category to see all outputt,
if it does not need this level of detail.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/8552)
The naming of generated assembler wasn't done quite right. There are
assembler files that are generated from a perl script, and there are
those who are not. Only the former must be renamed to the platform
specific asm extension.
Furthermore, we need to make sure that 'OSSL_provider_init' isn't case
sensitive on VMS, to allow for the least surprise for provider
builders.
Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8529)
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Nicola Tuveri <nic.tuv@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/8527)
OpenSSL will come with a set of well known providers, some of which
need to be accessible from the start. These are typically built in
providers, or providers that will work as fallbacks.
We do this when creating a new provider store, which means that this
will happen in every library context, regardless of if it's the global
default one, or an explicitely created one.
We keep the data about the known providers we want to make accessible
this way in crypto/provider_predefined.h, which may become generated.
For now, though, we make it simple and edited manually.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8480)
To ensure that old applications aren't left without any provider, and
at the same time not forcing any default provider on applications that
know how to deal with them, we device the concept of fallback
providers, which are automatically activated if no other provider is
already activated.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8480)
They're only used in one place, and only for a legacy datatype.
Reviewed-by: Paul Yang <yang.yang@baishancloud.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8302)
All relevant OSSL_METHOD_CONSTRUCT_METHOD callbacks got the callback
data passed to them, except 'destruct'. There's no reason why it
shouldn't get that pointer passed, so we make a small adjustment.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8341)
The openssl app registers trace callbacks which automatically
set a line prefix in the OSSL_TRACE_CTRL_BEGIN callback.
This prefix needs to be cleared in the OSSL_TRACE_CTRL_END
callback, otherwise a memory leak is reported when openssl
is built with crypto-mdebug enabled.
This leak causes the tests to fail when tracing and memory
debugging are enabled.
The leak can be observed by any command that produces trace
output, e.g. by
OPENSSL_TRACE=ANY util/shlib_wrap.sh apps/openssl version
...
[00:19:14] 4061 file=apps/bf_prefix.c, line=152, ...
26 bytes leaked in 1 chunks
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8463)
Configure with -DOPENSSL_DEV_NO_ATOMICS and you get refcount without
atomics. This is intended for internal development only, to check the
refcounting is properly coded. It should never become a configuration
option, hence the name of the macro.
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/8479)
This queries the provider for its available functionality (unless a
matching method structured is already cached, in which case that's
used instead), and creates method structure with the help of a passed
constructor. The result is cached if the provider allows it (or if
caching is forced).
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/8340)
Provide a number of functions to allow parameters to be set and
retrieved in a type safe manner. Functions are provided for many
integral types plus double, BIGNUM, UTF8 strings and OCTET strings.
All of the integer functions will widen the parameter data as
required. This permits a degree of malleability in the parameter
definition. For example a type can be changed from a thirty two bit
integer to a sixty four bit one without changing application code.
Only four and eight byte integral sizes are supported here.
A pair of real functions are available for doubles.
A pair of functions is available for BIGNUMs. These accept any sized
unsigned integer input and convert to/from a BIGNUM.
For each OCTET and UTF8 strings, four functions are defined. This
provide get and set functionality for string and for pointers to
strings. The latter avoiding copies but have other inherent risks.
Finally, some utility macros and functions are defined to allow
OSSL_PARAM definition arrays to be specified in a simple manner.
There are two macro and one function for most types. The exception
being BIGNUM, for which there is one macro and one function.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8451)
The OSSL_PARAM attribute names |buffer| and |buffer_size| may lead to
confusion, as they may make some think that the memory pointed at is
an intermediate memory are. This is not generally the case, so we
rename |buffer| and |buffer_size| to |data| and |data_size|
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8451)
in INSTALL, Configure, crypto/build.info, include/openssl/crmferr.h,
crypto/err/, include/openssl/err.h, and (to be updated:) util/libcrypto.num
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7646)
Also includes CRMF (RFC 4211) and HTTP transfer (RFC 6712)
CMP and CRMF API is added to libcrypto, and the "cmp" app to the openssl CLI.
Adds extensive man pages and tests. Integration into build scripts.
Incremental pull request based on OpenSSL commit 1362190b1b of 2018-09-26
1st chunk: CRMF API (include/openssl/crmf.h) and its documentation (reviewed)
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7328)
Adding a provider means creating an internal provier object and adding
it to the store. This allows the addition of built in providers, be it
in the OpenSSL libraries or in any application.
"Loading" a provider is defined broadly. A built in provider is already
"loaded" in essence and only needs activating, while a provider in a
dynamically loadable module requires actually loading the module itself.
In this API, "loading" a provider does both.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8287)
The OSSL_PROVIDER is the core object involved in loading a provider
module, initialize a provider and do the initial communication of
provider wide and core wide dispatch tables.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8287)
This does no harm, and ensures that the inclusion isn't mistakenly
removed in the generated *err.h where it's actually needed.
Reviewed-by: Nicola Tuveri <nic.tuv@gmail.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8397)
