This otherwise breaks compilation of applications using ssl.h on MingW.
Fixes#22296
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Kurt Roeckx <kurt@roeckx.be>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22316)
The code for the quic demos (from the openssl guide) is presented as
modifications of tls-client-block.c. Make it so that the quic code
better matches the tls code (drop unneeded assignments to "ret", use
the same comment on SSL_connect(), add the same printf() statement).
Also fix some minor typos.
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22483)
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22485)
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22485)
In s_client, when using quic, if we have data from the user to write then we shouldn't
hang in "select" waiting for something to happen.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22480)
The callback that makes -debug print the data sent/received needed extending
for the new QUIC callback codes.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22480)
In case the connection close error code is unexpected
print out the reason to help with diagnostics.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22474)
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22500)
There were intermitten failures on the test occasionally and
1s initial limit might be too short.
Fixes#22424
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22475)
The code did not yet check that the length of the RSA key is positive
and even.
Signed-off-by: Clemens Lang <cllang@redhat.com>
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
Reviewed-by: Tom Cosgrove <tom.cosgrove@arm.com>
(Merged from https://github.com/openssl/openssl/pull/22403)
Setup the loopargs array for all jobs, not only for the very first one.
It may fail with "Could not allocate 0 bytes for sig sign loop" and/or will
cause the loop functions to fail silently, because they operate on a NULL
PKEY context when "-async_jobs <n>" is specified.
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Todd Short <todd.short@me.com>
(Merged from https://github.com/openssl/openssl/pull/22399)
Free the PKEYs created for KEM and signature algorithms.
Free the encrypt/decrypt PKEY contexts for RSA.
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Todd Short <todd.short@me.com>
(Merged from https://github.com/openssl/openssl/pull/22399)
Adds a Makefile with all, clean, and test targets.
This has only been added for demos that already contain Makefiles.
For problematic tests that require inputs, the test target does nothing.
(Note: Demos should be self contained and not require unknown external
inputs. This PR does not attempt to fix this.)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20546)
If a retry occurs we need to reset s->rlayer.wnum so that next time around
we remember how much data we already sent.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22473)
If a URXE cannot be processed yet then we add it to the urx_deferred list.
Later, when they can be processed, we requeue them in the urx_pending list.
We must not reverse the order when doing so. We want to process the URXEs
in the order that they were received.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Todd Short <todd.short@me.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22452)
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22405)
Added notes to OPENSSL_INIT_set_config_filename and
OPENSSL_INIT_set_config_appname explaining why strdup
is used instead of OPENSSL_strdup.
CLA: trivial
Co-authored-by: Jean Apolo <jean.apolo@garmin.com>
Signed-off-by: Jean Apolo <jean.apolo@garmin.com>
Signed-off-by: Nate Karstens <nate.karstens@garmin.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21742)
evp_cipher_init_internal() takes a params array argument and this is processed
late in the initialisation process for some ciphers (AEAD ones).
This means that changing the IV length as a parameter will either truncate the
IV (very bad if SP 800-38d section 8.2.1 is used) or grab extra uninitialised
bytes.
Truncation is very bad if SP 800-38d section 8.2.1 is being used to
contruct a deterministic IV. This leads to an instant loss of confidentiality.
Grabbing extra bytes isn't so serious, it will most likely result in a bad
decryption.
Problem reported by Tony Battersby of Cybernetics.com but earlier discovered
and raised as issue #19822.
Fixes CVE-2023-5363
Fixes#19822
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
The 'rand_generate' method is not well suited for being used with
weak entropy sources in the 'get_entropy' callback, because the
caller needs to provide a preallocated buffer without knowing
how much bytes are actually needed to collect the required entropy.
Instead we use the 'rand_get_seed' and 'rand_clear_seed' methods
which were exactly designed for this purpose: it's the callee who
allocates and fills the buffer, and finally cleans it up again.
The 'rand_get_seed' and 'rand_clear_seed' methods are currently
optional for a provided random generator. We could fall back to
using 'rand_generate' if those methods are not implemented.
However, imo it would be better to simply make them an officially
documented requirement for seed sources.
Fixes#22332
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22394)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22394)
Have a new job just to run the fuzz tests with fuzzing build mode enabled.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22368)
We allow the fuzzer to influence the time between different packets using
the fake time capability.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22368)
We need to call quic_free() to free the record layer to ensure than any
BIO that was already set is also freed.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22368)
Some builds that weren't doing fuzzing were defining this which makes no
sense and is not appropriate for non-fuzzing builds.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22368)
Add a test for the recently added function OSSL_ERR_STATE_save_to_mark().
We can just modify the existing test_save_restore() to add this in.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22368)
When calling qrx_relocate_buffer, both the rxe and the pointer to the token
may be changing locations. We have to use a temporary copy of the token
pointer to avoid referencing the old location of the rxe.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22368)
We shouldn't ever have the case where the data flags indicate that
err_data has been malloc'd, but the err_data field is NULL.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22368)
We ignore such a bad signature when fuzzing - it will never be correct.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22368)
We accept a bad original destination connection id in the transport params
while we are fuzzing since this may change every time.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22368)
Handle retryable errors from SSL_read(). Also ensure the underlying BIO
handles the destination address capability.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22368)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22368)
Earlier today, it took me five manuals! to find what on earth the
"Performance"/"EVP_MD_fetch(3)" crosslinks actually mean:
EVP_sha1(3)
crypto(7)
EVP_MD_fetch(3) (but not there! don't read that!)
OSSL_PROVIDER-default(7)
EVP_MD-SHA1(7)
If, instead, EVP_sha1(3) referenced EVP_MD-SHA1(7) at /all/,
which it should do, since it's supposed to be what you're replacing it
with, but it doesn't actually say that, maybe people would use it.
I know I didn't because it's basically just deadass buried
As found by git grep -l 'and should consider using'
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22420)
struct timeval doesn't support nanosecs but OSSL_TIME does. We round up
any nanosecs to ensure that a non-zero input always results in a non-zero
output.
This fixes a quic-client fuzzer hang.
Fixes#22437
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22440)
