Some content has been moved out into the general libraries introduction.
Reformat and fill in some gaps with what remains.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
Reviewed-by: Anton Arapov <anton@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21560)
Give an overview of the two libraries and some key concepts common to
both.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
Reviewed-by: Anton Arapov <anton@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21560)
For some of the items we add FUTURE/SERVER/TESTING/MULTIPATH
designation to indicate these do not need to be resolved
in QUIC MVP release.
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21539)
Signed-off-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tom Cosgrove <tom.cosgrove@arm.com>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21608)
We add an additional loop around test_quic_write_read() to repeat the
test but using a session obtained from the initial iteration to confirm
that we can successfully resume the session.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21591)
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21467)
If you are building the latest release source code with enable-fips configured
then the FIPS provider you are using is not likely to be FIPS compliant.
This update demonstrates how to build a FIPS provider that is compliant
and use it with the latest source code.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20907)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/21397)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/21116)
We save the error state from the thread that encountered
a permanent error condition caused by system or internal
error to the QUIC_CHANNEL.
Then we restore it whenever we are returning to a user
call when protocol is shutdown.
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21087)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20061)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20061)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20061)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20061)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20061)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20061)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20061)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20061)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20061)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20061)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20061)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20061)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20061)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20061)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20061)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20061)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20061)
CLA: trivial
Reviewed-by: Tom Cosgrove <tom.cosgrove@arm.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21319)
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tom Cosgrove <tom.cosgrove@arm.com>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21322)
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tom Cosgrove <tom.cosgrove@arm.com>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21322)
This tutorial only covers a single stream client at this stage. A future
PR will cover adding multi-stream support.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21204)
This is defined in NIST SP 800-208 as the truncation to 192 bits of
SHA256. Unlike other truncated hashes in the SHA2 suite, this variant
doesn't have a different initial state, it is just a pure truncation
of the output.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21180)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21029)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21029)
EVP_PKEY_get_default_digest_name() may return 1 with the returned digest
name "UNDEF". This case hasn't been documented, and the meaning has been
left undefined, until now.
Reviewed-by: Todd Short <todd.short@me.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20460)
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21190)
Typos in doc/man* will be fixed in a different commit.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20910)
We split the page into two: one covering basic TLS introductory material
that applies to both clients and servers, and one with the specific
material on writing a blocking TLS client.
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21133)
Provide guidance on the steps needed to write a very simple blocking TLS
client.
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21133)
The asn1parse command now supports three different input formats:
openssl asn1parse -inform PEM|DER|B64
PEM: base64 encoded data enclosed by PEM markers (RFC7462)
DER: der encoded binary data
B64: raw base64 encoded data
The PEM input format is the default format. It is equivalent
to the former `-strictpem` option which is now marked obsolete
and kept for backward compatibility only.
The B64 is equivalent to the former default input format of the
asn1parse command (without `-strictpem`)
Fixes#7317
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7320)
1. Update manual, add SM4-CBC to CMAC cipher algorithm list.
2. Add test case for SM4-CBC CMAC, add "data length is greater
than 4 block-length" cases for aes-128-cbc, aes-192-cbc,
aes-256-cbc and des-ede3-cbc.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21102)
The DEPEND statement, when applied on files generated with GENERATE, may
be used to specify script modules that the template to be generated from
depends on. In short, this sort of depend:
DEPEND[generated]=util/perl/OpenSSL/something.pm
... would generate a perl run that has the inclusion directory
'util/perl/OpenSSL' and 'something' as the module to be loaded. However,
the package name for this module is 'OpenSSL::something', so to load it the
way it's expected, the inclusion directory should be 'util/perl', and the
module to be loaded should be specified as 'OpenSSL/something' (to be
massaged into a proper module name by the build file template).
To allow this, we introduce a file syntax, where a single '|' is used as a
directory separator, to delineate what part should be used as the inclustion
directory, and which part the module name to be loaded should be derived
from:
DEPEND[generated]=util/perl|OpenSSL/something.pm
Fixes#21112
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21117)
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20866)
deprecated since OpenSSL 3.0
openssl-genrsa is not deprecated however the OpenSSL documentation
states that it is the case from OpenSSL 3.0. This has been fixed in the
documentation, specifically in manpage 1.
Fixes#21055
CLA: trivial
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21059)
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/21086)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/19231)
With 3.0.8 validated, we need to note this in the documentation.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/21049)
When freeing the last reference to an EVP_PKEY there is no point in
taking the lock for the key. It is the last reference and is being freed
so must only be being used by a single thread.
This should not have been the source of any contention so its unclear to
what extent this will improve performance. But we should not be locking
when we don't need to.
Partially fixes#20286
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20932)
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20879)
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20879)
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20879)
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20879)
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20879)
We provide information about the new QUIC support related to the
msg_callback. We also document SSL_trace() which was previously missing
from the man pages.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20914)
We want to move to using this key for tarball and announcement signatures.
It won't happen immediately, though, as we must have it specified in the
latest update of each release branch, so people can verify properly.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21015)
Just like --help is explicitly supported, we should support --version.
This will greatly ease people adopting openssl.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tom Cosgrove <tom.cosgrove@arm.com>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20936)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Todd Short <todd.short@me.com>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/20832)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Todd Short <todd.short@me.com>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/20832)
Fix only typos in doc/man* for inclusion in 3.* branches.
Other typos have been fixed in a different commit.
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20924)
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Todd Short <todd.short@me.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20848)
Fix a typo that is confusing for newcomers.
CLA: trivial
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20909)
Also mentions the new FIN command in s_client advance mode
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20580)
These functions do nothing if used with a QUIC object, so we document
this behaviour.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20830)
Links were missing starting tags
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20729)
Fixes#19014
CLA: trivial
Reviewed-by: Tom Cosgrove <tom.cosgrove@arm.com>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20834)
The logic for handling inconsistent use of -rspin etc., -port, -server,
and -use_mock_srv options proved faulty. This is fixed here, updating and
correcting also the documentation and diagnostics of the involved options.
In particular, the case that -rspin (or -rspout. reqin, -reqout) does not
provide enough message file names was not properly described and handled.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/20295)
The docs mentioned a "RD"/"read done" state that could be returned.
In practice that never happened, so update the docs to match
reality.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20827)
Note that PKCS#12 input is still not supported here-
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18917)
Also updated the corresponding documentations.
Fixes#20710
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20745)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Tom Cosgrove <tom.cosgrove@arm.com>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20741)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/20736)
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tom Cosgrove <tom.cosgrove@arm.com>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/20298)
This keeps the interface consistent with other HPKE API's.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20583)
CLA: trivial
The functions that should be implemented together are `OSSL_FUNC_signature_verify_recover_init` and `OSSL_FUNC_signature_verify_recover` and not `OSSL_FUNC_signature_verify_recover_init` with ` OSSL_FUNC_signature_verify_init`
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20704)
CLA: trivial
The thing created by `OSSL_FUNC_signature_newctx()` and `OSSL_FUNC_signature_dupctx()` is a signature context, not a signature. It's in the name of the function and surrounding documentation.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20705)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Todd Short <todd.short@me.com>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20603)
Co-authored-by: Matthias St. Pierre <matthias.st.pierre@ncp-e.com>
Co-authored-by: Tomáš Mráz <tm@t8m.info>
Co-authored-by: Lin2Jing4 <35728132+Lin2Jing4@users.noreply.github.com>
Co-authored-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/17926)
Add support for the RFC7250 certificate-type extensions.
Alows the use of only private keys for connection (i.e. certs not needed).
Add APIs
Add unit tests
Add documentation
Add s_client/s_server support
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18185)
The function was incorrectly documented as enabling policy checking.
Fixes: CVE-2023-0466
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20561)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/20204)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/20204)
The documentation didn't mention the development where EVP_PKEY_get_id()
returns a negative value for provider-only implementations, and the
migration guide didn't mention how to cope with that.
Fixes#20497
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20501)
remove unneeded const qualifier to keep method declaration
and definition in sync.
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/20436)
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/20436)
We create "real" sockets for blocking mode so that we can block on them.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20514)
As the sleep() call is interruptible, it is not even a good idea to call
it in a loop if the caller uses some ridiculously large value as an
infinity just waiting for an interrupt.
Fixes#20524
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Tom Cosgrove <tom.cosgrove@arm.com>
(Merged from https://github.com/openssl/openssl/pull/20533)
The documented return type of the (incorrectly named; see below) OSSL_FUNC_decoder_export_object function signature is wrong; the correct type is int, due to the following line in core_dispatch.h:
OSSL_CORE_MAKE_FUNC(int, decoder_export_object,
Fixes#19543
Per the Github conversation with levitte and t8m for pull request #19964, the following issues are not addressed by this patch:
The macro OSSL_CORE_MAKE_FUNC in core_dispatch.h generates a function, and a corresponding function signature typedef with name ending in "_fn". The typedefed signature is unrelated to the signature of the function.
However, provider-decoder.pod describes typedefed signatures generated by the macro, but uses the names of the functions (lacking "_fn") instead of the typedefed signatures, which is a mismatch.
Also, the documented claim about OSSL_FUNC_decoder_export_object, etc that "None of these are actual functions" is contradicted by the fact that the code actually calls those functions, and calls them specifically by those names. E.g. in decoder_meth.c:
decoder->export_object = OSSL_FUNC_decoder_export_object(fns);
The functions are generated by OSSL_CORE_MAKE_FUNC.
The paragraph "None of these are actual functions"... should be replaced by something more like "These function signatures, generated by the OSSL_CORE_MAKE_FUNC macro, are for functions that are offered via function pointers in OSSL_DISPATCH arrays."
CLA: trivial
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19964)
If the ctx was *really* needed we'll probably fail later with an error
anyway, so no point in failing immediately.
Document that this behavior is dependent on the provider used to
implement the signature/verification.
Signed-off-by: Simo Sorce <simo@redhat.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/20375)
SSL_OP_NETSCAPE_CA_DN_BUG became obsolete in 3c33c6f6b1 and
support for SSL_OP_NETSCAPE_DEMO_CIPHER_CHANGE_BUG was removed by
7a4dadc3a6. The definitions are still listed under "OBSOLETE
OPTIONS retained for compatibility" in ssl.h.in, so this commit adds
them to the list of obsolete options in doc/man3.
Refs: https://github.com/nodejs/node/pull/46954
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20443)
In the default setup, using prediction resistance cascades to a reseeding
of all DRBGs. The cost for this will be excessive for highly threaded
applications.
Fixes#20414
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/20452)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/19076)
This describes them in detail in provider-keymgmt(7).
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20430)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/20386)
This was in the notes section but an earlier comment about it not being
mandatory was missed.
Fixes#20376
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/20382)
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20361)
Clearly document that implicit fetching is slower when using providers,
and explain prefetching. Added to crypto.pod and migration_guide.pod
links to it.
Add a link to EVP_default_properties_enable_fips() in crypto.pod.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20354)
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/20369)
The provider functions OSSL_FUNC_keymgmt_import_types() and
OSSL_FUNC_keymgmt_export_types() do not get the provider context passed.
This makes it difficult for providers to implement these functions unless
its a static implementation returning a truly constant OSSL_PARAM array.
Some providers may have a need to return an OSSL_PARAM array that is
dependent on the provider configuration, or anything else that is contained
in its provider context.
Add extended variants of these functions that get the provider context passed.
The functions should still return a static and constant OSSL_PARAM array, but
may use the provider context to select the array to return dependent on its
context. The returned array must be constant at least until the provider is
unloaded.
Providers can implement only the original functions, or only the extended
functions, or both. Implementing at least one of those functions is required
if also the respective OSSL_FUNC_keymgmt_import() or OSSL_FUNC_keymgmt_export()
function is implemented. If an extended function is available, it is called by
evp_keymgmt_import_types() or evp_keymgmt_export_types(), otherwise the original
function is called.
This makes the code backward compatible. Existing providers will only implement
the original functions, so these functions will continued to be called.
Newer providers can choose to implement the extended functions, and thus can
benefit from the provider context being passed to the implementation.
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20255)
Also add checks on failing cert/CRL up_ref calls; improve coding style.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/19199)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Todd Short <todd.short@me.com>
(Merged from https://github.com/openssl/openssl/pull/19931)
CLA: trivial
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Kurt Roeckx <kurt@roeckx.be>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20327)
Also add corresponding tests and to this end update credentials
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/20160)
S390x has to ability to offload modular exponentiation and CRT operations to
Crypto Express Adapters. This possible performance optimization was not yet
used by OpenSSL. Add support for offloading and implement an optimized
version of RSA and DH with it.
The environment variable OPENSSL_s390xcap now recognizes the token "nocex" to
prevent offloading.
Signed-off-by: Juergen Christ <jchrist@linux.ibm.com>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20113)
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19946)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Todd Short <todd.short@me.com>
(Merged from https://github.com/openssl/openssl/pull/20205)
The unused and untested internal function ossl_a2ucompare() has been
removed.
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/20177)
Point out that options must be given before the final file/URI arg.
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20156)
Add missing `I` to `<b>`
CLA: trivial
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20169)
https://github.com/openssl/openssl/pull/19901 backported the
"Honor OSSL_PKEY_PARAM_EC_POINT_CONVERSION_FORMAT as set and default to
UNCOMPRESSED" changeset to 3.0.
This commit updates:
- the HISTORY notes of the relevant documentation to mark the change
happened since 3.0.8.
- the `CHANGES.md file` to sync up with the tip of the `openssl-3.0`
branch
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20003)
Fixes#20084
In the 3.0 provider implementation the generic code that handles IV's
only allows a 12 byte IV. Older code intentionally added the ability for
the IV to be truncated.
As this truncation is unsafe, the documentation has been updated to
state that this in no longer allowed. The code has been updated to
produce an error when the iv length is set to any value other than 12.
NOTE: It appears that this additional padding may have originated from the code
which uses a 12 byte IV, that is then passed to CHACHA which zero pads it to 16 bytes.
Note that legacy behaviour in e_chacha20_poly1305.c has not been
updated.
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20151)
The lab tried doing a RSA decryption primitive using just n (using p, q) and d.
This failed for 2 reasons:
(1) e is required when importing
(2) Internally e is used for blinding.
Note n and e can be calculated using:
n = pq
e = (1/d) mod (p-1)(q-1)
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20133)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/18704)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/18704)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/19271)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/19271)
Ed25519 and Ed448 are included in the FIPS 140-3 provider for
compatibility purposes but are flagged as "fips=no" to prevent their accidental
use. This therefore requires that applications always specify the "fips=yes"
property query to enforce FIPS correctness.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20079)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20109)
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20095)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/20052)
Clarify behavior of OSSL_CMP_CTX_set_option() when given (negative)
values for OSSL_CMP_OPT_MSG_TIMEOUT or OSSL_CMP_OPT_TOTAL_TIMEOUT.
Fix doc of -msg_timeout and -total_timeout in openssl-cmp.pod.in
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/19391)
Current man page indicates the function returns an int while it returns
a long.
Fixes#20096.
CLA: trivial
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20097)
Context parameter OSSL_SIGNATURE_PARAM_NONCE_TYPE can now also be
retrieved for ECDSA and DSA.
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20070)
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/20023)
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/20023)
Fixes#19718Fixes#19716
Added PKCS12_SAFEBAG_get1_cert_ex(), PKCS12_SAFEBAG_get1_crl_ex() and
ASN1_item_unpack_ex().
parse_bag and parse_bags now use the libctx/propq stored in the P7_CTX.
PKCS12_free() needed to be manually constructed in order to free the propq.
pkcs12_api_test.c changed so that it actually tests the libctx, propq.
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19942)
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20019)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Todd Short <todd.short@me.com>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/20035)
Fixes#6277
Description:
Make each of the five EdDSA instances defined in RFC 8032 -- Ed25519,
Ed25519ctx, Ed25519ph, Ed448, Ed448ph -- available via the EVP APIs.
The desired EdDSA instance is specified via an OSSL_PARAM.
All instances, except for Ed25519, allow context strings as input.
Context strings are passed via an OSSL_PARAM. For Ed25519ctx, the
context string must be nonempty.
Ed25519, Ed25519ctx, Ed448 are PureEdDSA instances, which means that
the full message (not a digest) must be passed to sign and verify
operations.
Ed25519ph, Ed448ph are HashEdDSA instances, which means that the input
message is hashed before sign and verify.
Testing:
All 21 test vectors from RFC 8032 have been added to evppkey_ecx.txt
(thanks to Shane Lontis for showing how to do that). Those 21 test
vectors are exercised by evp_test.c and cover all five instances.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/19705)
is used.
Fixes#19934
The existing code was looking for the digest size, and then returned
zero.
The example code in EVP_KDF-SS.pod has been corrected to not use a
digest.
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19935)
Fixes#19953
CLA: trivial
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20008)
Fixes#8630
The remaining functions are at least as old as 0.9.8 so it is
not worth documenting this.
Reviewed-by: Nicola Tuveri <nic.tuv@gmail.com>
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19956)
Fixes#19829
Examples added for setting/getting ECDSA SIG related r and s values
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19936)
Fixes#19782
Clarify that EVP_Q_MAC() can be used as an alternative that allows
setting of the libctx.
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19855)
Now that ACVP test vectors exist, support has been added for this mode.
See https://nvlpubs.nist.gov/nistpubs/SpecialPublications/NIST.SP.800-108r1.pdf
Note that the test vectors used fairly large values for the input key
and the context, so the contraints for these has been increased from
256 to 512 bytes.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19916)
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19889)
We already permit this in crypto/objects/objects.txt, but not programatically,
although being able to do so programatically would be beneficial.
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19876)
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/13817)
The RSA decryption as implemented before required very careful handling
of both the exit code returned by OpenSSL and the potentially returned
ciphertext. Looking at the recent security vulnerabilities
(CVE-2020-25659 and CVE-2020-25657) it is unlikely that most users of
OpenSSL do it correctly.
Given that correct code requires side channel secure programming in
application code, we can classify the existing RSA decryption methods
as CWE-676, which in turn likely causes CWE-208 and CWE-385 in
application code.
To prevent that, we can use a technique called "implicit rejection".
For that we generate a random message to be returned in case the
padding check fails. We generate the message based on static secret
data (the private exponent) and the provided ciphertext (so that the
attacker cannot determine that the returned value is randomly generated
instead of result of decryption and de-padding). We return it in case
any part of padding check fails.
The upshot of this approach is that then not only is the length of the
returned message useless as the Bleichenbacher oracle, so are the
actual bytes of the returned message. So application code doesn't have
to perform any operations on the returned message in side-channel free
way to remain secure against Bleichenbacher attacks.
Note: this patch implements a specific algorithm, shared with Mozilla
NSS, so that the attacker cannot use one library as an oracle against the
other in heterogeneous environments.
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/13817)
FIPS 186-4 section 5 "The RSA Digital Signature Algorithm", subsection
5.5 "PKCS #1" says: "For RSASSA-PSS […] the length (in bytes) of the
salt (sLen) shall satisfy 0 <= sLen <= hLen, where hLen is the length of
the hash function output block (in bytes)."
Introduce a new option RSA_PSS_SALTLEN_AUTO_DIGEST_MAX and make it the
default. The new value will behave like RSA_PSS_SALTLEN_AUTO, but will
not use more than the digest length when signing, so that FIPS 186-4 is
not violated. This value has two advantages when compared with
RSA_PSS_SALTLEN_DIGEST: (1) It will continue to do auto-detection when
verifying signatures for maximum compatibility, where
RSA_PSS_SALTLEN_DIGEST would fail for other digest sizes. (2) It will
work for combinations where the maximum salt length is smaller than the
digest size, which typically happens with large digest sizes (e.g.,
SHA-512) and small RSA keys.
J.-S. Coron shows in "Optimal Security Proofs for PSS and Other
Signature Schemes. Advances in Cryptology – Eurocrypt 2002, volume 2332
of Lecture Notes in Computer Science, pp. 272 – 287. Springer Verlag,
2002." that longer salts than the output size of modern hash functions
do not increase security: "For example,for an application in which at
most one billion signatures will be generated, k0 = 30 bits of random
salt are actually sufficient to guarantee the same level of security as
RSA, and taking a larger salt does not increase the security level."
Signed-off-by: Clemens Lang <cllang@redhat.com>
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19724)
Do not accept password-based if expected signature-based and no secret is available and
do not accept signature-based if expected password-based and no trust anchors available.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/19729)
The types OSSL_DISPATCH, OSSL_ITEM, OSSL_ALGORITHM, OSSL_PARAM,
OSSL_CALLBACK, and OSSL_PASSPHRASE_CALLBACK are described in their own
manual page, so we change every mention of them to links to those pages.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19842)
This expands on some of the core type descriptions, and also makes it
easier to find the documentation for each type, at least on Unix, with
a simple call like "man OSSL_ALGORITHM".
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19842)
Fixes openssl#19771
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19787)
