Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Todd Short <todd.short@me.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22356)
Ensure builds enable QUIC without explicitly having to ask for it. To
disable QUIC pass "no-quic" to Configure.
As a result we can remove all use of "enable-quic" from the various CI
runs.
We also add a CHANGES and NEWS entry for QUIC support.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21332)
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tom Cosgrove <tom.cosgrove@arm.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21212)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Tom Cosgrove <tom.cosgrove@arm.com>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21217)
Typos in doc/man* will be fixed in a different commit.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20910)
The libcrypto library uses shared library pinning to prevent its
cleanup handlers from crashing at program termination because of a
premature unloading of the shared library.
However, shared library pinning is enabled also for static builds,
which may lead to surpising behaviour if libcrypto is linked
statically to a shared third-party library, because in this case
the third-party library gets pinned.
This surprising behaviour is caused by the fact that the `no-shared`
configure option does not imply `no-pinshared`. Since this quirk
can't be changed without potentially breaking existing code, we just
document it here and provide a workaround.
Fixes#20977
Reviewed-by: Todd Short <todd.short@me.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20985)
If the user specifies an alternative build file than the default, this
alternative is recorded in $config{build_file}, not $target{build_file}.
Therefore, the former should be used, leaving the latter as a mere default.
This is a bug. While fixing it, document it better too.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20173)
CLA:trivial
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Paul Yang <kaishen.yy@antfin.com>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19882)
Some primitives are designed to be used in a multi-threaded environment,
if supported, e.g., Argon2.
This patch adds support for preemptive threading and basic synchronization
primitives for platforms compliant with POSIX threads or Windows CRT.
Native functions are wrapped to provide a common (internal) API.
Threading support can be disabled at compile time. If enabled, threading
is disabled by default and needs to be explicitly enabled by the user.
Thread enablement requires an explicit limit on the number of threads that
OpenSSL may spawn (non-negative integer/infinity). The limit may be changed.
Signed-off-by: Čestmír Kalina <ckalina@redhat.com>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/12255)
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/19262)
CLA: trivial
Actually there is no option called `no-{ssl|tls|tls1_3|dtls}-method`.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18872)
Supports Linux, MacOS and FreeBSD
Disabled by default, enabled via `enabled-tfo`
Some tests
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8692)
Looks more like manpage format. :)
Also remove `{{..}}` notation and rewrite around it.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/16329)
Different tests may use unexpectedly different versions of perl,
depending on whether they hardcode the path to the perl executable or if
they resolve the path from the environment. This fixes it so that the
same perl is always used.
Fix some trailing whitespace and spelling mistakes as well.
CLA: trivial
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/16362)
And document the -w option
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/16325)
Describe current relationship between config and Configure.
Put the environment variable list in alphabetical order.
Add description of KERNEL_BITS.
Add new variable CONFIG_NOWAIT.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/16325)
There doesn't appear to be a good reason to omit protocol message tracing by default.
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15665)
Use it in the automated workflows.
Fixes: #15247
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15248)
A pair of the disabled string checks were incorrect.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/15082)
Note that configuration and installation procedure has changed:
- The FIPS provider is now disabled by default and needs to
be enabled by configuring with `enable-fips`.
- If the FIPS provider is enabled, it gets installed automatically.
There is no extra installation step required anymore.
This is more natural and coincides with the expectation of the
user, namely "what's configured, gets installed".
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/13684)
Some requirements and build hints for assembler modules compilation were
moved from doc/man3/OPENSSL_ia32cap.pod to INSTALL.md.
Fixes#14674
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14683)
In many locations, the files have been converted to markdown
syntactically, but don't utilize the power of markdown yet.
Here, instead of just repeating the file name, the markdown link
now shows the title of the document.
Additionally, the notes are now reference in the same order in both
the README and the INSTALL file.
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14042)
Some of the notes and readme files have been converted to markdown
format recently and renamed during this process. While adding the
.md extension was a natural step, switching to mixed cases was not
a change to the better, it gives them a ragged appearance:
NOTES.ANDROID => NOTES-Android.md
NOTES.DJGPP => NOTES-DJGPP.md
NOTES.PERL => NOTES-Perl.md
NOTES.UNIX => NOTES-Unix.md
NOTES.VMS => NOTES-VMS.md
NOTES.VALGRIND => NOTES-Valgrind.md
NOTES.WIN => NOTES-Windows.txt
README.ENGINE => README-Engine.md
README.FIPS => README-FIPS.md
Moreover, the NOTES-Windows.txt file is the only file which has been
converted to markdown but has received a .txt file extension.
This doesn't make sense, because the OpenSSL users on Windows will
need to read the other markdown documents as well. Since they are
developers, we can trust them to be able to associate their favorite
editor with the .md extension.
In fact, having a comment at the beginning of the file saying that it
is in markdown format but we didn't dare to add the correct extension
in order not to overwhelm our Windows users can be interpreted either
as unintentionally funny or disrespectful ;-)
This commit suggests the following more consistent renaming:
NOTES.ANDROID => NOTES-ANDROID.md
NOTES.DJGPP => NOTES-DJGPP.md
NOTES.PERL => NOTES-PERL.md
NOTES.UNIX => NOTES-UNIX.md
NOTES.VMS => NOTES-VMS.md
NOTES.VALGRIND => NOTES-VALGRIND.md
NOTES.WIN => NOTES-WINDOWS.md
README.ENGINE => README-ENGINES.md
README.FIPS => README-FIPS.md
(note the plural in README-ENGINES, anticipating a README-PROVIDERS)
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14042)
CLA: trivial
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/12320)
Make the improved semantics of VFO replace the previous VF and remove VFO
Add warnings about overriding use of HARNESS_VERBOSE* variables
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/12279)
Change default FIPS HMAC KEY from all-zero's
Use default FIPSKEY if not given on command line.
Make all -macopt in fipsinstall optional
Make all tests, except fipsinstall, use the default -macopt and
-mac_name flags.
Define and use FIPSDIR variable on VMS/MMS.
Also use SRCDIR/BLDDIR in SRCTOP/BLDTOP.
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/12235)
