Add missing SSL_OP flags. Correct the list of flags set by SSL_OP_ALL.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/16236)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15230)
Less tersely: converted SSL_get_options, SSL_set_options,
SSL_CTX_get_options and SSL_CTX_get_options to take and return uint64_t
since we were running out of 32 bits.
Fixes: 15145
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15230)
Previously we would set SSL_OP_LEGACY_SERVER_CONNECT by default in
SSL_CTX_new(), to allow connections to legacy servers that did not
implement RFC 5746.
It has been more than a decade since RFC 5746 was published, so
there has been plenty of time for implmentation support to roll out.
Change the default behavior to be to require peers to support
secure renegotiation. Existing applications that already cleared
SSL_OP_LEGACY_SERVER_CONNECT will see no behavior change, as
re-clearing the flag is just a little bit of redundant work.
The old behavior is still available by explicitly setting the flag
in the application.
Also remove SSL_OP_LEGACY_SERVER_CONNECT from SSL_OP_ALL, for
similar reasons.
Document the behavior change in CHANGES.md, and update the
SSL_CTX_set_options() and SSL_CONF_cmd manuals to reflect the change
in default behavior.
Fixes: 14848
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15127)
KTLS support has been changed to be off by default, and configuration is
via a single "option" rather two "modes". Documentation is updated
accordingly.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14799)
This change applies the recommendation of the Linux Documentation Project
to the documentation files of OpenSSL. Additionally, util/find-doc-nits
was updated accordingly.
The change follows a suggestion of mspncp on https://github.com/openssl/openssl/pull/12370
and incoporates the requested changes on the pull request
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/12460)
Some applications want even all plaintext copies beeing
zeroized. However, currently plaintext residuals are kept in rbuf
within the s3 record layer.
This patch add the option SSL_OP_CLEANSE_PLAINTEXT to its friends to
optionally enable cleansing of decrypted plaintext data.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/12251)
CLA: trivial
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/12320)
Partially fixes#11209.
Before OpenSSL 3.0 in case when peer does not send close_notify,
the behaviour was to set SSL_ERROR_SYSCALL error with errno 0.
This behaviour has changed. The SSL_OP_IGNORE_UNEXPECTED_EOF restores
the old behaviour for compatibility's sake.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Kurt Roeckx <kurt@roeckx.be>
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/11735)
Also patch find-doc-nits to ignore a Microsoft trademark and not
flag it as a spelling error.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/10023)
Change find-doc-nits to complain if a section header is repeated,
within a parent header (i.e., duplicate =head2 within a =head1).
In almost all cases, we just remove the duplicate header, as
it was a "continuation" of the =head1 that was already in affect.
In some cases, just remove "=head1 NOTES", possibly moving text
around, because the "NOTES" were really important parts of the
DESCRIPTION section.
No =headX sections should end with a period.
All =head1 labels should be in all uppercase.
No sub-head (=head2, etc) should be in all uppercase.
Update find-doc-nits to reject the above.
Fixup an internal POD link
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Paul Yang <kaishen.yy@antfin.com>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/9631)
3.0.0 is a habit from pre-3.0 OpenSSL, which doesn't make sense with
the new version scheme.
Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9376)
Add SSL_OP64_NO_EXTENDED_MASTER_SECRET, that can be set on either
an SSL or an SSL_CTX. When processing a ClientHello, if this flag
is set, do not indicate that the EMS TLS extension was received in
either the ssl3 object or the SSL_SESSION. Retain most of the
sanity checks between the previous and current session during
session resumption, but weaken the check when the current SSL
object is configured to not use EMS.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3910)
While stereotyped repetitions are frowned upon in literature, they
serve a useful purpose in manual pages, because it is easier for
the user to find certain information if it is always presented in
the same way. For that reason, this commit harmonizes the varying
formulations in the HISTORY section about which functions, flags,
etc. were added in which OpenSSL version.
It also attempts to make the pod files more grep friendly by
avoiding to insert line breaks between the symbol names and the
corresponding version number in which they were introduced
(wherever possible). Some punctuation and typographical errors
were fixed on the way.
Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7854)
Document SSL_OP_NO_ANTI_REPLAY and SSL_CTX_set_allow_early_data_cb()
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6469)
Also allows the apps to set it.
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5227)
IFF the client has ChaCha first, and server cipher priority is used,
and the new SSL_OP_PRIORITIZE_CHACHA_FOR_MOBILE option is used,
then reprioritize ChaCha above everything else. This way, A matching
ChaCha cipher will be selected if there is a match. If no ChaCha ciphers
match, then the other ciphers are used.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Andy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4436)
Includes addition of the various options to s_server/s_client. Also adds
one of the new TLS1.3 ciphersuites.
This isn't "real" TLS1.3!! It's identical to TLS1.2 apart from the protocol
and the ciphersuite...and the ciphersuite is just a renamed TLS1.2 one (not
a "real" TLS1.3 ciphersuite).
Reviewed-by: Rich Salz <rsalz@openssl.org>
Move manpages to manX directories
Add Windows/VMS install fix from Richard Levitte
Update README
Fix typo's
Remove some duplicates
Reviewed-by: Richard Levitte <levitte@openssl.org>
