Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/20727)
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/20727)
If a malformed config file is provided such as the following:
openssl_conf = openssl_init
[openssl_init]
providers = provider_sect
[provider_sect]
= provider_sect
The config parsing library will crash overflowing the stack, as it
recursively parses the same provider_sect ad nauseum.
Prevent this by maintaing a list of visited nodes as we recurse through
referenced sections, and erroring out in the event we visit any given
section node more than once.
Note, adding the test for this revealed that our diagnostic code
inadvertently pops recorded errors off the error stack because
provider_conf_load returns success even in the event that a
configuration parse failed. The call path to provider_conf_load has been
updated in this commit to address that shortcoming, allowing recorded
errors to be visibile to calling applications.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22898)
Currently, a provider is activated from our config file using the
activate parameter. However, the presence of the config parameter is
sufficient to trigger activation, leading to a counterintuitive
situation in which setting "activate = 0" still activates the provider
Make activation more intuitive by requiring that activate be set to one
of yes|true|1 to trigger activation. Any other value, as well as
omitting the parameter entirely, prevents activation (and also maintains
backward compatibility.
It seems a bit heavyweight to create a test specifically to validate the
plurality of these settings. Instead, modify the exiting openssl config
files in the test directory to use variants of these settings, and
augment the default.cnf file to include a provider section that is
explicitly disabled
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22906)
When verbosity isn't set to 1 or higher, suppress indirect leaks (i.e.
only print direct leaks) to make output more human-readable. Setting
V=1 on make test produces all leaks (direct and indirect)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22678)
The newly introduced test case do not work
when configured with no-des, fix that by
choosing -aes128 as cipher.
Fixes ffed597882 ("cms: avoid intermittent test failure")
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/23086)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/21281)
Also add missing getter functionss OSSL_CMP_{CTX,HDR}_get0_geninfo_ITAVs() to CMP API.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/21281)
The following entries should be still applied.
Reviewed-by: Neil Horman <nhorman@openssl.org>
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/23048)
If you decrypt a random input using RSAES-PKCS-v1_5, then there is a
non-negligible chance that the result will look like a valid plaintext
(that is why RSAES-PKCS-v1_5 shouldn't be used anymore). This was the
cause of an intermittent failure in a test that did a cms-encrypt
operation targetting multiple recipients.
The failure happened during key-only decrypt. The recipient decrypts
every RSA ciphertext -- only one is supposed to decrypt successfully,
which would reveal the right content-key. Occassionally, more than
one decrypted successfully.
Update the test by specifying the recipient cert in the decrypt op
(this avoids looping over all RSA ciphertexts).
Add a new test to get coverage for key-only decrypt, but use RSA-OAEP
during the encrypt op.
Fixes https://github.com/openssl/project/issues/380
Testing:
$ make TESTS='test_cms' test
Reviewed-by: Neil Horman <nhorman@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/23055)
In the command `nmake TEST='foo' test`, on Windows the runner
will look for test `'foo'` and complain about the test not being found
(due to the extraneous single quotes), whereas with `nmake TEST="foo" test`,
the test `foo` will be correctly found.
CLA: trivial
Reviewed-by: Tom Cosgrove <tom.cosgrove@arm.com>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/23059)
EVP_MAC_CTX_get_mac_size() cannot be called on older
unfixed versions before EVP_MAC_init().
Reviewed-by: Neil Horman <nhorman@openssl.org>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/23006)
In the event that a config file contains this sequence:
=======
openssl_conf = openssl_init
config_diagnostics = 1
[openssl_init]
oid_section = oids
[oids]
testoid1 = 1.2.3.4.1
testoid2 = A Very Long OID Name, 1.2.3.4.2
testoid3 = ,1.2.3.4.3
======
The leading comma in testoid3 can cause a heap buffer overflow, as the
parsing code will move the string pointer back 1 character, thereby
pointing to an invalid memory space
correct the parser to detect this condition and handle it by treating it
as if the comma doesn't exist (i.e. an empty long oid name)
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22957)
Ensure we test the case where the port value is empty in the URL.
Reviewed-by: Todd Short <todd.short@me.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/22961)
Test that input value of 1 for p is treated as an error
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Todd Short <todd.short@me.com>
(Merged from https://github.com/openssl/openssl/pull/22960)
Confirm that using an ENGINE works as expected with TLS even if it is
loaded late (after construction of the SSL_CTX).
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Todd Short <todd.short@me.com>
(Merged from https://github.com/openssl/openssl/pull/22864)
Since the gen->type will not be set in a2i_GENERAL_NAME
the gen->d.otherName will not be automatically
cleaned up by GENERAL_NAME_free.
Also fixed a similar leak in a2i_GENERAL_NAME,
where ASN1_STRING_set may fail but gen->d.ia5
will not be automatically cleaned up.
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Tom Cosgrove <tom.cosgrove@arm.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22996)
Test the next arithmetic operation to safely determine if adding the
next digit in the passed property string will overflow
Also, noted a bug in the parse_hex code. When parsing non-digit
characters (i.e. a-f and A-F), we do a tolower conversion (which is
fine), and then subtract 'a' to get the hex value from the ascii (which
is definately wrong). We should subtract 'W' to convert tolower
converted hex digits in the range a-f to their hex value counterparts
Add tests to test_property_parse_error to ensure overflow checks work
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Tom Cosgrove <tom.cosgrove@arm.com>
(Merged from https://github.com/openssl/openssl/pull/22874)
Like in #17345, evp_extra_test links libcrypto statically, but also has
a dynamic/shared load via the legacy provider, which leads to ambiguous
behavior in evp_extra_test on some platforms, usually a crash (SIGSEGV)
on exit via the atexit handlers. Statically link the legacy provider to
avoid this.
Fixes#22819
Helped-by: Neil Horman <nhorman@openssl.org>
Helped-by: Tomas Mraz <tomas@openssl.org>
Signed-off-by: Randall S. Becker <randall.becker@nexbridge.ca>
Reviewed-by: Tom Cosgrove <tom.cosgrove@arm.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22905)
We test its validity by trying to load it.
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
Reviewed-by: Todd Short <todd.short@me.com>
(Merged from https://github.com/openssl/openssl/pull/22866)
Common symbols (type 'C' in the 'nm' output) are allowed to be defined more
than once. This makes test/recipes/01-test_symbol_presence.t reflect that.
Fixes#22869 (partially)
Fixes#22837
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22880)
On some platforms, the compiler may add symbols that aren't ours and that we
should ignore.
They are generally expected to start with a double underscore, and thereby
easy to detect.
Fixes#22869 (partially)
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22880)
Coverity recorded issues 1551739 and 1551737, a potential double free in the
tests. It occurs when the DUP operation fails in such a way val3_read is
returned as the same pointer as val2_read. Ideally it should never
happen, but resetting val3_read to 0 should satisfy coverity that there
is no issue here
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Todd Short <todd.short@me.com>
(Merged from https://github.com/openssl/openssl/pull/22800)
Add null check to cmac_size(). This avoids a seg-fault encountered
with cmac when EVP_MAC_CTX_get_mac_size() is called before init.
Extend mac testing in evp_test.c to check that the sizes returned by
EVP_MAC_CTX_get_mac_size() before and after init make sense (this also
ensures that we no longer seg-fault).
Fixes#22842
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Neil Horman <nhorman@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22858)
There were no PKIX-TA(0) SPKI(1) Full(0) (i.e. "0 1 0") test cases in
"danetest.in".
There is now at least a success case, which will exercise freeing the public
key after it is sanity checked, since with PKIX-TA(0) there's nothing we can do
with just the raw public key, a full chain to a local trust anchor is in any
case required.
The failure (to match) code path is already well oiled, but failure to decode
while adding malfored TLSA records could still use some additional tests...
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22821)
We don't need the decoded X.509 Full(0) certificate for the EE usages 1 and 3,
because the leaf certificate is always part of the presented chain, so the
certificate is only validated as well-formed, and then discarded, but the
TLSA record is of course still used after the validation step.
Added DANE test cases for: 3 0 0, 3 1 0, 1 0 0, and 1 1 0
Reported by Claus Assmann.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22821)
Check that the "consumed" parameter is working as expected.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22718)
If a single packet contains data from multiple streams we need to keep track
of the cummulative connection level credit consumed across all of the
streams. Once the connection level credit has been consumed we must stop
adding stream data.
Fixes#22706
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22718)
Instead of just accepting a number of bytes, allows openssl rand to
accept a k|m|g suffix to scale to kbytes/mbytes/gbytes
Fixes#22622
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tom Cosgrove <tom.cosgrove@arm.com>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22624)
