Remove gost-engine from the distribution tarball.
Signed-off-by: Hu Keping <hukeping@huawei.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/13301)
CLA: trivial
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Kurt Roeckx <kurt@roeckx.be>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/13289)
We had several cases where the connection failed but we did not
have an error message to differentiate which failure condition had
been triggered. Add some more messages to help clarify what is
going wrong.
[extended tests]
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/13251)
Use SSL_R_NO_PROTOCOLS_AVAILABLE instead of ERR_R_INTERNAL_ERROR,
to match what the BoringSSL tests expect for this case.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/13251)
DTLS by design ignores records/packets with bad MAC or failed AEAD tag
validation. However, recent changes to have provided cipher
implementations caused tls1_enc() to leave an entry on the error queue
for invalid GCM tags, e.g.:
800BEAEF487F0000:error::Provider routines:gcm_stream_update:cipher operation failed:providers/implementations/ciphers/ciphercommon_gcm.c:306
The BoringSSL tests check for entries on the error queue with
SSL_get_error() and so we were seeing spurious test failures
due to the additional item on the error queue. To avoid leaving
such spurious entries on the error queue, set a mark before calling
the ssl3_enc 'enc' method, and pop to that mark before ignoring
invalid packets.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/13251)
I discovered the potential for use-after-free on glob_tevent_reg &
its members in this function as a consequence of some static (de-)initialization
fiasco in C++ client code.
Long story short, an EVP_PKEY_free() was happening after
OPENSSL_cleanup(). Aside from being freed the EVP_PKEY object wasn't
actually being used after cleanup, it was basically just an
ordering issue.
Obviously the application behavior here is somewhat suspect,
but IMO is basically benign. Crashing (most typical outcome
of a UAF) doesn't seem the optimal response.
At any rate, the issue can be avoided (at least with regard to this function)
by simply updating the pointer to NULL rather than leaving it pointing
to the freed memory, as is the typical practice.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/13267)
The Standard POSIX Threads (SPT) implementation hangs in some test cases
if FLOSS is not used.
CLA: Permission is granted by the author to the OpenSSL team to use
these modifications.
Fixes#13277
Signed-off-by: Randall S. Becker <rsbecker@nexbridge.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/13279)
Because this test loads the shared libraries dynamically, there are
cases where that results in errors because the ASAN library wasn't
loaded first. That makes this test unsuitable in an ASAN build.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/13281)
doc/internal/man7/deprecation.pod was unclear in some areas, and
included general documentation that has no place there.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/13240)
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/13278)
The OSSL_DEPRECATEDIN_3_0 macro introduced in PR #13074 is intended to
be passed as a parameter to the various PEM declaration macros. However,
in some cases OSSL_DEPRECATEDIN_3_0 is defined to be empty, and it is
not allowed to pass empty macro arguments in C90. Therefore we ensure
these macros are always defined. In the case where they were empty
previously we use a no-op value instead.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/13227)
PR#12860 fixed issues with the Lhash code. It replaced usage of
DEFINE_LHASH_OF() in the public headers. Unfortunately it missed a couple
of instances.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/13274)
These are meant to be used with functions like
OSSL_ENCODER_CTX_new_by_EVP_PKEY()
The OSSL_ENCODER_CTX_new_by_EVP_PKEY() manual is also expanded on the
topics of output types and selections.
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/13189)
There is no option to output DH params in DER form. -outform doesn't
apply to -genparam with 'openssl genpkey', and it shouldn't.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/13266)
The handling for the SCSVs was the same as for regular ciphers;
just merge them into the same table-driven handler.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/13010)
PAC pointer authentication signs the return address against the value
of the stack pointer, to prevent stack overrun exploits from corrupting
the control flow. However, this requires that the AUTIASP is issued with
SP holding the same value as it held when the PAC value was generated.
The Poly1305 armv8 code got this wrong, resulting in crashes on PAC
capable hardware.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/13256)
CLA: Permission is granted by the author to the OpenSSL team to use
these modifications.
Fixes#13237
Signed-off-by: Randall S. Becker <rsbecker@nexbridge.com>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/13238)
The private key length is supposed to be a user settable parameter.
We do check if it's set or not, and if not, we do apply defaults.
Fixes#12071
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/13140)
cipher_hw_generic_##mode has been renamed to ossl_cipher_hw_generic_##mode.
There were a few missing renames for t4 in .inc files.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/13213)
We were missing a call to SSLfatal. A comment claimed that we had already
called it - but that is incorrect.
Reviewed-by: Ben Kaduk <kaduk@mit.edu>
(Merged from https://github.com/openssl/openssl/pull/13229)
Also, restore a behaviour change, where load_cert() would look at
stdin when the input file name is NULL, and make sure to call
load_cert_pass() with a corresponding argument where load_cert() was
used in OpenSSL 1.1.1.
Fixes#13235
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/13236)
Fixes#7930
CLA: trivial
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/12927)
The keydata argument of OSSL_FUNC_keymgmt_validate() should be read-only.
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/13201)
This removes a TODO.
This function is not needed since any place that needs to do the
conversion normally has a special case name2nid table.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/13202)
The keydata argument of OSSL_FUNC_keymgmt_has() should be read-only.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/13200)
This tries to fix the following link errors on aarch64 when using OpenSSL
3.0.0 alpha 6, compiling it with "no-shared" and -fPIC in CFLAGS, then
trying to use the resulting OpenSSL static libraries in the build of
elfutils, which embed libcrypto.a into libdebuginfo.so, which hides all
symbols (except the libdebuginfod ones) by default:
/opt/1A/toolchain/aarch64-v4.0.86/lib/gcc/aarch64-1a-linux-gnu/8.4.1/../../../../aarch64-1a-linux-gnu/bin/ld: /workdir/build/build-pack/build-pack-temporary-static-dependencies/install/lib/libcrypto.a(libcrypto-lib-sha1-armv8.o): relocation R_AARCH64_ADR_PREL_PG_HI21 against symbol `OPENSSL_armcap_P' which may bind externally can not be used when making a shared object; recompile with -fPIC
/workdir/build/build-pack/build-pack-temporary-static-dependencies/install/lib/libcrypto.a(libcrypto-lib-sha1-armv8.o): in function `sha1_block_data_order':
(.text+0x0): dangerous relocation: unsupported relocation
/opt/1A/toolchain/aarch64-v4.0.86/lib/gcc/aarch64-1a-linux-gnu/8.4.1/../../../../aarch64-1a-linux-gnu/bin/ld: /workdir/build/build-pack/build-pack-temporary-static-dependencies/install/lib/libcrypto.a(libcrypto-lib-chacha-armv8.o): relocation R_AARCH64_ADR_PREL_PG_HI21 against symbol `OPENSSL_armcap_P' which may bind externally can not be used when making a shared object; recompile with -fPIC
/workdir/build/build-pack/build-pack-temporary-static-dependencies/install/lib/libcrypto.a(libcrypto-lib-chacha-armv8.o): in function `ChaCha20_ctr32':
(.text+0x6c): dangerous relocation: unsupported relocation
/opt/1A/toolchain/aarch64-v4.0.86/lib/gcc/aarch64-1a-linux-gnu/8.4.1/../../../../aarch64-1a-linux-gnu/bin/ld: /workdir/build/build-pack/build-pack-temporary-static-dependencies/install/lib/libcrypto.a(libcrypto-lib-sha256-armv8.o): relocation R_AARCH64_ADR_PREL_PG_HI21 against symbol `OPENSSL_armcap_P' which may bind externally can not be used when making a shared object; recompile with -fPIC /workdir/build/build-pack/build-pack-temporary-static-dependencies/install/lib/libcrypto.a(libcrypto-lib-sha256-armv8.o): in function `sha256_block_data_order':
(.text+0x0): dangerous relocation: unsupported relocation
/opt/1A/toolchain/aarch64-v4.0.86/lib/gcc/aarch64-1a-linux-gnu/8.4.1/../../../../aarch64-1a-linux-gnu/bin/ld: /workdir/build/build-pack/build-pack-temporary-static-dependencies/install/lib/libcrypto.a(libcrypto-lib-sha512-armv8.o): relocation R_AARCH64_ADR_PREL_PG_HI21 against symbol `OPENSSL_armcap_P' which may bind externally can not be used when making a shared object; recompile with -fPIC /workdir/build/build-pack/build-pack-temporary-static-dependencies/install/lib/libcrypto.a(libcrypto-lib-sha512-armv8.o): in function `sha512_block_data_order':
(.text+0x0): dangerous relocation: unsupported relocation
/opt/1A/toolchain/aarch64-v4.0.86/lib/gcc/aarch64-1a-linux-gnu/8.4.1/../../../../aarch64-1a-linux-gnu/bin/ld: /workdir/build/build-pack/build-pack-temporary-static-dependencies/install/lib/libcrypto.a(libcrypto-lib-poly1305-armv8.o): relocation R_AARCH64_ADR_PREL_PG_HI21 against symbol `OPENSSL_armcap_P' which may bind externally can not be used when making a shared object; recompile with -fPIC
/workdir/build/build-pack/build-pack-temporary-static-dependencies/install/lib/libcrypto.a(libcrypto-lib-poly1305-armv8.o): in function `poly1305_init':
(.text+0x14): dangerous relocation: unsupported relocation
/workdir/build/build-pack/build-pack-temporary-static-dependencies/install/lib/libcrypto.a(libcrypto-lib-poly1305-armv8.o): in function `poly1305_emit_neon':
(.text+0x8e4): relocation truncated to fit: R_AARCH64_CONDBR19 against symbol `poly1305_emit' defined in .text section in /workdir/build/build-pack/build-pack-temporary-static-dependencies/install/lib/libcrypto.a(libcrypto-lib-poly1305-armv8.o)
In poly1305-armv8.pl, hide symbols the same way they are hidden in poly1305-x86_64.pl.
Reviewed-by: Kurt Roeckx <kurt@roeckx.be>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/13056)
The following internal functions are affected:
ossl_do_blob_header
ossl_do_PVK_header
ossl_b2i
ossl_b2i_bio
This is reflected by moving include/internal/pem.h to include/crypto/pem.h
engines/e_loader_attic gets the source code added to it to have
continued access to those functions.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/13195)
Also deprecate EVP_PKEY_get1_tls_encodedpoint().
The preferred alternative is EVP_PKEY_set1_encoded_public_key() and
EVP_PKEY_get1_encoded_public_key().
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/13105)
We do the same thing for the "get1" version. In reality this has broader
use than just TLS (it can also be used in CMS), and "encodedpoint" only
makes sense when you are talking about EC based algorithms.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/13105)
Add return value for aarch64 in the init key function.
This will avoid overwriting the stream pointers of aarch64.
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/13133)
When the crlNumber field contains only 0-9 digits, the output is
ambiguous as to what base it's in, which can be confusing. Adding this
prefix makes it explicit that it's in hex.
CLA: trivial
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/12434)
One of the x509 tests checks to make sure spurious errors don't appear on
the stack. The x509 app uses the OSSL_STORE code to load things. The
OSSL_STORE code will try various different formats - which results in
lots of failures. However those failures are typically suppressed by
OSSL_STORE unless they are interesting. OSSL_STORE thinks it knows what
kind of errors are uninteresting (ASN.1 errors) but gets confused if
upper levels of code add additional errors to the stack. This was
happening in the DSA code which confused OSSL_STORE and meant the errors
were not being suppressed properly - and hence the x509 test failed.
Interestingly this only impacts a no-dh build, because in a no-dh build
the DSA param decoder suddenly becomes the last to be tried. If it
happens earlier in the list the errors end up getting suppressed anyway.
The simplest solution is to just to remove the error from the DSA param
decoder code. It's not adding any useful information anyway.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/13162)
Some DH tests are done against files generated with '-pkeyopt priv_len:224'
This parameter must of course be reproduced when creating the key with
EVP_PKEY_fromdata(), or there will be a default that's guaranteed to
differ from the key parameters on file.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/13166)
The recommended private key length is a key parameter among other key
parameters, and is included in the key data transferred in an import
or export between legacy implementations and provider implementations.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/13166)
