And so clean a few useless includes
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19721)
When decoding a key and asking the keymgmt to import the key data, it
was told that the key data includes everything. This may not be true,
since the user may have specified a different selection, and some
keymgmts may want to be informed.
Our key decoders' export function, on the other hand, didn't care
either, and simply export anything they could, regardless.
In both cases, the selection that was specified by the user is now
passed all the way.
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15934)
Previously all the SubjectPublicKeyInfo decoders were specific to a key
type. We would iterate over all them until a match was found for the correct
key type. Each one would fully decode the key before then testing whether
it was a match or not - throwing it away if not. This was very inefficient.
Instead we introduce a generic SubjectPublicKeyInfo decoder which figures
out what type of key is contained within it, before subsequently passing on
the data to a key type specific SubjectPublicKeyInfo decoder.
Fixes#15646
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15662)
This has us switch from the 'structure' "pkcs8" to "PrivateKeyInfo",
which is sensible considering we already have "SubjectPublicKeyInfo".
We also add "EncryptedPrivateKeyInfo", and use it for a special decoder
that detects and decrypts an EncryptedPrivateKeyInfo structured DER
blob into a PrivateKeyInfo structured DER blob and passes that on to
the next decoder implementation.
The result of this change is that PKCS#8 decryption should only happen
once per decoding instead of once for every expected key type.
Furthermore, this new decoder implementation sets the data type to the
OID of the algorithmIdentifier field, thus reducing how many decoder
implementations are tentativaly run further down the call chain.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15498)
They aren't needed at all any more, since the properties contain the
same information.
This also drops the parameter names OSSL_DECODER_PARAM_INPUT_TYPE
and OSSL_DECODER_PARAM_INPUT_STRUCTURE.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15570)
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14587)
This commit sets the error mark before calling d2i_X509_SIG
and clear it if that function call is successful.
The motivation for this is that if d2i_X509_SIG returns NULL then the
else clause will be entered and d2i_PKCS8_PRIV_KEY_INFO will be
called. If d2i_X509_SIG raised any errors those error will be on the
error stack when d2i_PKCS8_PRIV_KEY_INFO gets called, and even if it
returns successfully those errors will still be on the error stack.
We ran into this issue when upgrading Node.js to 3.0.0-alpha15.
More details can be found in the ref links below.
Refs: https://github.com/nodejs/node/issues/38373
Refs: https://github.com/danbev/learning-libcrypto/blob/master/notes/wrong-tag-issue2.md
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Ben Kaduk <kaduk@mit.edu>
(Merged from https://github.com/openssl/openssl/pull/15067)
This includes the special decoder used in our STOREMGMT 'file:' implementation
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14834)
This required refactoring a number of functions from the diverse
EVP_PKEY_ASN1_METHOD implementations to become shared backend
functions. It also meant modifying a few of them to return pointers
to our internal RSA / DSA/ DH / EC_KEY, ... structures instead of
manipulating an EVP_PKEY pointer directly, letting the caller do the
latter.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14314)
This makes it possible to use d2i_<TYPE>_PUBKEY instead of the generic
d2i_PUBKEY()
This required adding a number of new d2i_<TYPE>_PUBKEY functions.
These are all kept internal.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14314)
The decoding of DER into keys with keytype specific routines depended
entirely on the absence of the generic algo specific C type from
EVP_PKEYs. That is not necessary, and may even prove to be a bit of a
disadvantage, depending on what libcrypto has to offer in terms of
type specific d2i functionality for different kinds of input
structures.
To remedy, we try with all available type specific functions first,
and only turn to the general d2i functions (those that return an
EVP_PKEY) as a last resort.
Furthermore, there are cases where the decoder might not get the key
type it expected. This may happen when certain key types that share
the same OpenSSL structure may be mixed up somehow. The known cases
are EC vs SM2 and RSA vs RSA-PSS.
To remedy, we add the possibility to specify a checking function that
can check if the key that was decoded meets decoder expectations.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14314)
Those TODOs do not really apply to 3.0 as the legacy internal
keys will stay.
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14367)
Partial fix for #12964
This adds ossl_ names for the following symbols:
ec_*, ecx_*, ecdh_*, ecdsa_*, sm2_*
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14231)
When a SubjectPublicKeyInfo (SPKI) is decoded into an X509_PUBKEY
structure, the corresponding EVP_PKEY is automatically added as well.
This used to only support our built-in keytypes, and only in legacy
form.
This is now refactored by making The ASN1 implementation of the
X509_PUBKEY an EXTERN_ASN1, resulting in a more manual implementation
of the basic support routines. Specifically, the d2i routine will do
what was done in the callback before, and try to interpret the input
as an EVP_PKEY, first in legacy form, and then using OSSL_DECODER.
Fixes#13893
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14281)
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/14086)
The PROV_R codes can be returned to applications so it is useful
to have some common set of provider reason codes for the applications
or third party providers.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/14086)
The EC KEYMGMT implementation handled SM2 as well, except what's
needed to support decoding: loading functions for both EC and SM2 that
checks for the presence or absence of the SM2 curve the same way as
the EC / SM2 import functions.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14028)
Because decoders are coupled with keymgmts from the same provider,
ours need to produce provider side keys the same way. Since our
keymgmts create key data with the provider library context, so must
our decoders.
We solve with functions to adjust the library context of decoded keys,
and use them.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/13661)
The base functionality to implement the keypair decoders doesn't
change much, but this results in a more massive amount of
OSSL_DISPATCH and OSSL_ALGORITHM arrays, to support a fine grained
selection of implementation based on what parts of the keypair
structure (combinations of key parameters, public key and private key)
should be expected as input, the input type ("DER", "PEM", ...) and the
outermost input structure ("pkcs8", "SubjectPublicKeyInfo", key
type specific structures, ...).
We add support for the generic structure name "type-specific", to
allow selecting that without knowing the exact name of that structure.
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/13248)
This change makes the naming more consistent, because three different terms
were used for the same thing. (The term libctx was used by far most often.)
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/12621)
Also adds error output tests on loading key files with unsupported algorithms to 30-test_evp.t
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/13023)
This stops them leaking into other namespaces in a static build.
They remain internal.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/13013)
ECX_KEY was not meant for public consumption, it was only to be
accessed indirectly via EVP routines. However, we still need internal
access for our decoders.
This partially reverts 7c664b1f1bFixes#12880
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/12956)
The encoder implementations were implemented by unnecessarily copying
code into numerous topical source files, making them hard to maintain.
This changes merges all those into two source files, one that encodes
into DER and PEM, the other to text.
Diverse small cleanups are included.
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/12803)
This is placed as CORE because the core of libcrypto is the authority
for what is possible to do and what's required to make these abstract
objects work.
In essence, an abstract object is an OSSL_PARAM array with well
defined parameter keys and values:
- an object type, which is a number indicating what kind of
libcrypto structure the object in question can be used with. The
currently possible numbers are defined in <openssl/core_object.h>.
- an object data type, which is a string that indicates more closely
what the contents of the object are.
- the object data, an octet string. The exact encoding used depends
on the context in which it's used. For example, the decoder
sub-system accepts any encoding, as long as there is a decoder
implementation that takes that as input. If central code is to
handle the data directly, DER encoding is assumed. (*)
- an object reference, also an octet string. This octet string is
not the object contents, just a mere reference to a provider-native
object. (**)
- an object description, which is a human readable text string that
can be displayed if some software desires to do so.
The intent is that certain provider-native operations (called X
here) are able to return any sort of object that belong with other
operations, or an object that has no provider support otherwise.
(*) A future extension might be to be able to specify encoding.
(**) The possible mechanisms for dealing with object references are:
- An object loading function in the target operation. The exact
target operation is determined by the object type (for example,
OSSL_OBJECT_PKEY implies that the target operation is a KEYMGMT)
and the implementation to be fetched by its object data type (for
an OSSL_OBJECT_PKEY, that's the KEYMGMT keytype to be fetched).
This loading function is only useful for this if the implementations
that are involved (X and KEYMGMT, for example) are from the same
provider.
- An object exporter function in the operation X implementation.
That exporter function can be used to export the object data in
OSSL_PARAM form that can be imported by a target operation's
import function. This can be used when it's not possible to fetch
the target operation implementation from the same provider.
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/12512)
