Previously, the initialization was done immediately in RAND_DRBG_set(),
which is also called in RAND_DRBG_uninstantiate().
This made it difficult for the FIPS DRBG self test to verify that the
internal state had been zeroized, because it had the side effect that
the drbg->data structure was reinitialized immediately.
To solve the problem, RAND_DRBG_set() has been split in two parts
static int rand_drbg_set(RAND_DRBG *drbg, int type, unsigned int flags);
static int rand_drbg_init_method(RAND_DRBG *drbg);
and only the first part is called from RAND_DRBG_uninstantiate().
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/11111)
Its entry in Configuration/10-main.conf was dropped in commit
7ead0c8918 ("Configure: fold related configurations more aggressively
and clean-up.") probably because all but one of its bn_ops were removed
(RC4_CHAR remained). Benchmarks on an Alpha EV7 indicate that RC4_INT is
better than RC4_CHAR so rather than restoring the configuation, remove
it from config.
CLA: trivial
Bug: https://bugs.gentoo.org/697840
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/11130)
Property "default" no longer exists, replace "default=yes" with
"provider=default"
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/11150)
Previously, evp-keymgmt_util_export_to_provider() took care of all
kinds of exports of EVP_PKEYs to provider side keys, be it from its
legacy key or from another provider side key. This works most of the
times, but there may be cases where the caller wants to be a bit more
in control of what sort of export happens when.
Also, when it's time to remove all legacy stuff, that job will be much
easier if we have a better separation between legacy support and
support of provided stuff, as far as we can take it.
This changes moves the support of legacy key to provider side key
export from evp-keymgmt_util_export_to_provider() to
evp_pkey_make_provided(), and makes sure the latter is called from all
EVP_PKEY functions that handle legacy stuff.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/11074)
Made macro names that refer to a known base OID, an commented accordingly.
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/10557)
Clean up a manual we've touched, according to conventions found in
Linux' man-pages(7); function arguments in descriptions should be in
italics, and types, macros and similar should be in bold, with the
exception for NULL.
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/10557)
Tests that go through provider cannot recognise PKEY_CTRL_INVALID from
PKEY_CTRL_ERROR any more, because provided implementations' param
setting functions return 0 or 1.
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/10557)
This includes legacy PSS controls to params conversion, and an attempt
to generalise the parameter names when they are suitable for more than
one operation.
Also added crypto/rsa/rsa_aid.c, containing proper AlgorithmIdentifiers
for known RSA+hash function combinations.
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/10557)
We were excluding more code than we needed to in the OCSP/HTTP code in
the event of no-sock. We should also not assume that a BIO passed to our
API is socket based.
This fixes the no-sock build
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/11134)
Replace the properties default, fips and legacy with a single property
called "provider". So, for example, instead of writing "default=yes" to
get algorithms from the default provider you would instead write
"provider=default". We also have a new "fips" property to indicate that
an algorithm is compatible with FIPS mode. This applies to all the
algorithms in the FIPS provider, as well as any non-cryptographic
algorithms (currently only serializers).
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/11097)
Add options to change the parameter encoding and point conversions for EC
public and private keys. These options are present in the deprecated 'ec'
utility.
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/11113)
Specifically, refer from the deprecated tools to the pkey equivalents.
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/11113)
When converting legacy controls to OSSL_PARAMs, return the unsupported -2
value correctly.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/11049)
These are temporary files generated by the build process that should not
be checked in.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/11122)
Use of the low level DH functions has been informally discouraged for a
long time. We now formally deprecate them.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/11024)
Use of the low level RSA functions has been informally discouraged for a
long time. We now formally deprecate them.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/11063)
Allow for encryption overhead in early DTLS size check
and send overflow if validated record is too long
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/11096)
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/10631)
`BN_copy()` (and indirectly `BN_dup()`) do not propagate the
`BN_FLG_CONSTTIME` flag: the propagation has been turned on and off a
few times in the past years, because in some conditions it has shown
unintended consequences in some code paths.
Without turning the propagation on once more, we can still improve
`BN_copy()` by avoiding to leak `src->top` in case `src` is flagged with
`BN_FLG_CONSTTIME`.
In this case we can instead use `src->dmax` as the number of words
allocated for `dst` and for the `memcpy` operation.
Barring compiler or runtime optimizations, if the caller provides `src`
flagged as const time and preallocated to a public size, no leak should
happen due to the copy operation.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/10631)
We should never leak the bit length of the secret scalar in the key,
so we always set the `BN_FLG_CONSTTIME` flag on the internal `BIGNUM`
holding the secret scalar.
This is important also because `BN_dup()` (and `BN_copy()`) do not
propagate the `BN_FLG_CONSTTIME` flag from the source `BIGNUM`, and
this brings an extra risk of inadvertently losing the flag, even when
the called specifically set it.
The propagation has been turned on and off a few times in the past
years because in some conditions has shown unintended consequences in
some code paths, so at the moment we can't fix this in the BN layer.
In `EC_KEY_set_private_key()` we can work around the propagation by
manually setting the flag after `BN_dup()` as we know for sure that
inside the EC module the `BN_FLG_CONSTTIME` is always treated
correctly and should not generate unintended consequences.
Setting the `BN_FLG_CONSTTIME` flag alone is never enough, we also have
to preallocate the `BIGNUM` internal buffer to a fixed public size big
enough that operations performed during the processing never trigger
a realloc which would leak the size of the scalar through memory
accesses.
Fixed Length
------------
The order of the large prime subgroup of the curve is our choice for
a fixed public size, as that is generally the upper bound for
generating a private key in EC cryptosystems and should fit all valid
secret scalars.
For preallocating the `BIGNUM` storage we look at the number of "words"
required for the internal representation of the order, and we
preallocate 2 extra "words" in case any of the subsequent processing
might temporarily overflow the order length.
Future work
-----------
A separate commit addresses further hardening of `BN_copy()` (and
indirectly `BN_dup()`).
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/10631)
For EC keys it is particularly important to avoid leaking the bit length
of the secret scalar.
Key import/export should never leak the bit length of the secret
scalar in the key.
For this reason, on export we use padded BIGNUMs with fixed length,
using the new `ossl_param_bld_push_BN_pad()`.
When importing we also should make sure that, even if short lived,
the newly created BIGNUM is marked with the BN_FLG_CONSTTIME flag as
soon as possible, so that any processing of this BIGNUM might opt for
constant time implementations in the backend.
Setting the BN_FLG_CONSTTIME flag alone is never enough, we also have
to preallocate the BIGNUM internal buffer to a fixed size big enough
that operations performed during the processing never trigger a
realloc which would leak the size of the scalar through memory
accesses.
Fixed length
------------
The order of the large prime subgroup of the curve is our choice for
a fixed public size, as that is generally the upper bound for
generating a private key in EC cryptosystems and should fit all valid
secret scalars.
For padding on export we just use the bit length of the order
converted to bytes (rounding up).
For preallocating the BIGNUM storage we look at the number of "words"
required for the internal representation of the order, and we
preallocate 2 extra "words" in case any of the subsequent processing
might temporarily overflow the order length.
Future work
-----------
To ensure the flag and fixed size preallocation persists upon
`EC_KEY_set_private_key()`, we need to further harden
`EC_KEY_set_private_key()` and `BN_copy()`.
This is done in separate commits.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/10631)
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/10631)
Current CMS en/decryption tests only validate that our current decyption
and encryption algorithms are compatible, but they say nothing about
correctness of the output for the given set of parameters.
As a partial fix in absence of proper KAT tests, we decrypt ciphertexts
generated with OpenSSL 1.1.1.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/10631)
A pair of internal functions related to EC_KEY handling could benefit
from declaring `EC_KEY *` variables as `const`, providing clarity for
callers and readers of the code, in addition to enlisting the compiler
in preventing some mistakes.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/10631)
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/10631)
Since pointer in x32 is 4 bytes, add x86_64-support.pl to define
pointer_size and pointer_register based on flavour to support
stuctures like:
struct { void *ptr; int blocks; }
This fixes 90-test_sslapi.t on x32. Verified with
$ ./Configure shared linux-x86_64
$ make
$ make test
and
$ ./Configure shared linux-x32
$ make
$ make test
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/10988)
test/generate_ssl_tests.pl uses OpenSSL::Test to get to some of its
practical location functions. A recent note in the setup() code made
its result not quite match the original (we do check that), so there's
a need to silence setup(), which we do with a simple optional argument.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/11080)
