When EVP_MD_CTX_new fails call SSLfatal before the goto err.
This resolves a state machine issue on the out of memory condition.
Fixes#15491.
CLA: trivial
Reviewed-by: Ben Kaduk <kaduk@mit.edu>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15520)
For functions that exist in 1.1.1 provide a simple aliases via #define.
Fixes#15236
Functions with OSSL_DECODER_, OSSL_ENCODER_, OSSL_STORE_LOADER_,
EVP_KEYEXCH_, EVP_KEM_, EVP_ASYM_CIPHER_, EVP_SIGNATURE_,
EVP_KEYMGMT_, EVP_RAND_, EVP_MAC_, EVP_KDF_, EVP_PKEY_,
EVP_MD_, and EVP_CIPHER_ prefixes are renamed.
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15405)
The initial implementation always deferred the generation of the
requested ticket(s) until the next application write, but this
is not a great fit for what it actually does, architecturally wise.
A request to send a session ticket means entering back into the
handshake state machine (or "in init", as it's known in the
implementation). The state machine transition is not something that
only occurs at an application-data write, and in general could occur at
any time. The only constraint is that we can't enter "init" while in
the middle of writing application data. In such cases we will need to
wait until the next TLS record boundary to enter the state machine,
as is currently done.
However, there is no reason why we cannot enter the handshake state
machine immediately in SSL_new_session_ticket() if there are no
application writes pending. Doing so provides a cleaner API surface to
the application, as then calling SSL_do_handshake() suffices to drive
the actual ticket generation. In the previous state of affairs a dummy
zero-length SSL_write() would be needed to trigger the ticket
generation, which is a logical mismatch in the type of operation being
performed.
This commit should only change whether SSL_do_handshake() vs zero-length
SSL_write() is needed to immediately generate a ticket after the
SSL_new_session_ticket() call -- the default behavior is still to defer
the actual write until there is other application data to write, unless
the application requests otherwise.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14817)
Add -client_renegotiation flag support. The -client_renegotiation flag is
equivalent to SSL_OP_ALLOW_CLIENT_RENEGOTIATION. Add support to the app,
the config code, and the documentation.
Add SSL_OP_ALLOW_CLIENT_RENEGOTIATION to the SSL tests. We don't need to
always enable it, but there are so many tests so this is the easiest thing
to do.
Add a test where client tries to renegotiate and it fails as expected. Add
a test where server tries to renegotiate and it succeeds. The second test
is supported by a new flag, -immediate_renegotiation, which is ignored on
the client.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15184)
Less tersely: converted SSL_get_options, SSL_set_options,
SSL_CTX_get_options and SSL_CTX_get_options to take and return uint64_t
since we were running out of 32 bits.
Fixes: 15145
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15230)
Previously we would set SSL_OP_LEGACY_SERVER_CONNECT by default in
SSL_CTX_new(), to allow connections to legacy servers that did not
implement RFC 5746.
It has been more than a decade since RFC 5746 was published, so
there has been plenty of time for implmentation support to roll out.
Change the default behavior to be to require peers to support
secure renegotiation. Existing applications that already cleared
SSL_OP_LEGACY_SERVER_CONNECT will see no behavior change, as
re-clearing the flag is just a little bit of redundant work.
The old behavior is still available by explicitly setting the flag
in the application.
Also remove SSL_OP_LEGACY_SERVER_CONNECT from SSL_OP_ALL, for
similar reasons.
Document the behavior change in CHANGES.md, and update the
SSL_CTX_set_options() and SSL_CONF_cmd manuals to reflect the change
in default behavior.
Fixes: 14848
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15127)
`strdup(propq)` failure is doing a `goto err;` from where `SSL_CTX_free` is called.
The possible call is made before reference and lock fields setup.
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/15052)
It's possible to set an invalid protocol list that will be sent in a
ClientHello. This validates the inputs to make sure this does not
happen.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14815)
Following on from CVE-2021-3449 which was caused by a non-zero length
associated with a NULL buffer, other buffer/length pairs are updated to
ensure that they too are always in sync.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Some functions that lock things are void, so we just return early.
Also make ossl_namemap_empty return 0 on error. Updated the docs, and added
some code to ossl_namemap_stored() to handle the failure, and updated the
tests to allow for failure.
Fixes: #14230
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14238)
A trivial PR to remove some commonly repeated words. It looks like this is
not the first PR to do this.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14420)
The low level SRP implementation has been deprecated with no replacement.
Therefore the libssl level APIs need to be similarly deprecated.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14132)
The default supported groups code was disabled in the event of a build
with no-ec and no-dh. However now that providers can add there own
groups (which might not fit into either of these categories), this is
no longer appropriate.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/13916)
This removes man unnecessary OPENSSL_NO_DH guards from libssl. Now that
libssl is entirely using the EVP APIs and implementations can be plugged
in via providers it is no longer needed to disable DH at compile time in
libssl. Instead it should detect at runtime whether DH is available from
the loaded providers.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/13916)
The client-side cert verification callback function may not only return
as usual for success or 0 for failure, but also -1,
typically on failure verifying the server certificate.
This makes the handshake suspend and return control to the calling application
with SSL_ERROR_WANT_RETRY_VERIFY.
The app can for instance fetch further certificates or cert status information
needed for the verification.
Calling SSL_connect() again resumes the connection attempt
by retrying the server certificate verification step.
This process may even be repeated if need be.
The core implementation of the feature is in ssl/statem/statem_clnt.c,
splitting tls_process_server_certificate() into a preparation step
that just copies the certificates received from the server to s->session->peer_chain
(rather than having them in a local variable at first) and returns to the state machine,
and a post-processing step in tls_post_process_server_certificate() that can be repeated:
Try verifying the current contents of s->session->peer_chain basically as before,
but give the verification callback function the chance to pause connecting and
make the TLS state machine later call tls_post_process_server_certificate() again.
Otherwise processing continues as usual.
The documentation of the new feature is added to SSL_CTX_set_cert_verify_callback.pod
and SSL_want.pod.
This adds two tests:
* A generic test in test/helpers/handshake.c
on the usability of the new server cert verification retry feature.
It is triggered via test/ssl-tests/03-custom_verify.cnf.in (while the bulky auto-
generated changes to test/ssl-tests/03-custom_verify.cnf can be basically ignored).
* A test in test/sslapitest.c that demonstrates the effectiveness of the approach
for augmenting the cert chain provided by the server in between SSL_connect() calls.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/13906)
The openssl code base has only a few occurrences of 'unsigned const char'
(15 occurrences), compared to the more common 'const unsigned char' (4420
occurrences).
While the former is not illegal C, mixing the 'const' keyword (a 'type
qualifier') in between 'unsigned' and 'char' (both 'type specifiers') is a
bit odd.
The background for writing this patch is not to be pedantic, but because
the 'opmock' program (used to mock headers for unit tests) does not accept
the 'unsigned const char' construct. While this definitely is a bug in
opmock or one of its dependencies, openssl is the only piece of software we
are using in combination with opmock that has this construct.
CLA: trivial
Reviewed-by: Nicola Tuveri <nic.tuv@gmail.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/13722)
disabled_enc_mask et al were global. Now that cipher loading is done
individually for each SSL_CTX, based on the libctx configured for that
SSL_CTX this means that some things will be disabled for one SSL_CTX but
not for another. The global variables set up the potential for different
SSL_CTXs to trample on each other. We move these variables into the SSL_CTX
structure.
Fixes#12040
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/13465)
This was probably due to a merge
Fixes#13449
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/13450)
no-dh disables the low level API for DH. However, since we're now using
the high level EVP API in most places we don't need to disable quite so
much.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/13368)
The old function took a DH as a parameter. In the new version we pass
an EVP_PKEY instead. Similarly for the SSL_CTX version of this function.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/13368)
These ctrls pass around a DH object which is now deprecated, so we
deprecate the ctrls themselves.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/13368)
Since SSLfatal() doesn't take a function code any more, we drop that
argument everywhere. Also, we convert all combinations of SSLfatal()
and ERR_add_data() to an SSLfatal_data() call.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/13316)
We create a new file ssl/tls_depr.c to contain functions that need to call
deprecated APIs in libssl. This enables us to remove
OPENSSL_SUPPRESS_DEPRECATED from a number of other libssl files.
The deprecated API usage is either related to ENGINEs and is needed to
continue to support applications that use such ENGINEs. Or they are needed
to support some deprecated public libssl APIs.
One other file remains in libssl that still uses deprecated APIs: s3_cbc.c
This is needed to support the deprecated SSLv3.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/13135)
Many of the new types introduced by OpenSSL 3.0 have an OSSL_ prefix,
e.g., OSSL_CALLBACK, OSSL_PARAM, OSSL_ALGORITHM, OSSL_SERIALIZER.
The OPENSSL_CTX type stands out a little by using a different prefix.
For consistency reasons, this type is renamed to OSSL_LIB_CTX.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/12621)
Automatically rename all instances of _with_libctx() to _ex() as per
our coding style.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/12970)
We fix 3 problems with safestack:
- Including an openssl header file without linking against libcrypto
can cause compilation failures (even if the app does not otherwise need
to link against libcrypto). See issue #8102
- Recent changes means that applications in no-deprecated builds will need
to include additional macro calls in the source code for all stacks that
they need to use - which is an API break. This changes avoids that
necessity.
- It is not possible to write code using stacks that works in both a
no-deprecated and a normal build of OpenSSL. See issue #12707.
Fixes#12707
Contains a partial fix for #8102. A similar PR will be needed for hash to
fully fix.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/12781)
HPE NonStop Port Changes for 3.0.0 Includes unthreaded, PUT, and SPT for OSS.
The port changes include wrapping where necessary for FLOSS and
appropriate configuration changes to support that. Two tests
are excluded as being inappropriate for the platform.
The changes are:
* Added /usr/local/include to nonstop-nsx_spt_floss to load floss.h
* Added SPT Floss variant for NonStop
* Wrapped FLOSS definitions in OPENSSL_TANDEM_FLOSS to allow selective enablement.
* SPT build configuration for NonStop
* Skip tests not relevant for NonStop
* PUT configuration changes required for NonStop platforms
* Configurations/50-nonstop.conf: updates for TNS/X platform.
* FLOSS instrumentation for HPE NonStop TNS/X and TNS/E platforms.
* Configurations/50-nonstop.conf: modifications for non-PUT TNS/E platform b
* Fix use of DELAY in ssltestlib.c for HPNS.
* Fixed commit merge issues and added floss to http_server.c
CLA: Permission is granted by the author to the OpenSSL team to use these modifications.
Fixes#5087.
Signed-off-by: Randall S. Becker <rsbecker@nexbridge.com>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/12800)
Also, document its unusual semantics of resetting the
cipher list (but preserving other configuration).
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/7274)
The RAND_DRBG API did not fit well into the new provider concept as
implemented by EVP_RAND and EVP_RAND_CTX. The main reason is that the
RAND_DRBG API is a mixture of 'front end' and 'back end' API calls
and some of its API calls are rather low-level. This holds in particular
for the callback mechanism (RAND_DRBG_set_callbacks()) and the RAND_DRBG
type changing mechanism (RAND_DRBG_set()).
Adding a compatibility layer to continue supporting the RAND_DRBG API as
a legacy API for a regular deprecation period turned out to come at the
price of complicating the new provider API unnecessarily. Since the
RAND_DRBG API exists only since version 1.1.1, it was decided by the OMC
to drop it entirely.
Other related changes:
Use RNG instead of DRBG in EVP_RAND documentation. The documentation was
using DRBG in places where it should have been RNG or CSRNG.
Move the RAND_DRBG(7) documentation to EVP_RAND(7).
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/12509)
The X509_VERIFY_PARAM can only take a single IP address, although it can
have multiple hostnames. When SSL_add1_host() is given an IP address,
don't accept it if there is already one configured.
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/9201)
There is a slight mismatch here because X509_VERIFY_PARAM copes only
with a single IP address, and doesn't let it be cleared once it's set.
But this fixes up the major use case, making things easier for users to
get it right.
The sconnect demo now works for Legacy IP literals; for IPv6 it needs to
fix up the way it tries to split the host:port string, which will happen
in a subsequent patch.
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/9201)
- In order to not add many X509_XXXX_with_libctx() functions the libctx and propq may be stored in the X509 object via a call to X509_new_with_libctx().
- Loading via PEM_read_bio_X509() or d2i_X509() should pass in a created cert using X509_new_with_libctx().
- Renamed some XXXX_ex() to XXX_with_libctx() for X509 API's.
- Removed the extra parameters in check_purpose..
- X509_digest() has been modified so that it expects a const EVP_MD object() and then internally it does the fetch when it needs to (via ASN1_item_digest_with_libctx()).
- Added API's that set the libctx when they load such as X509_STORE_new_with_libctx() so that the cert chains can be verified.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/12153)
Deprecate SSL_get_peer_certificte() and replace with
SSL_get1_peer_certificate().
Add SSL_get0_peer_certificate.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/8730)
For CBC ciphersuites using Mac-then-encrypt we have to be careful about
removing the MAC from the record in constant time. Currently that happens
immediately before MAC verification. Instead we move this responsibility
to the various protocol "enc" functions so that MAC removal is handled at
the same time as padding removal.
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/12288)
Usually it will be freed in tls_early_post_process_client_hello().
However if a ClientHello callback will be used and will return
SSL_CLIENT_HELLO_RETRY then tls_early_post_process_client_hello()
may never come to the point where pre_proc_exts is freed.
Fixes#12194
CLA: trivial
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Ben Kaduk <kaduk@mit.edu>
(Merged from https://github.com/openssl/openssl/pull/12330)
SSL_dup attempted to duplicate the BIO state if the source SSL had BIOs
configured for it. This did not work.
Firstly the SSL_dup code was passing a BIO ** as the destination
argument for BIO_dup_state. However BIO_dup_state expects a BIO * for that
parameter. Any attempt to use this will either (1) fail silently, (2) crash
or fail in some other strange way.
Secondly many BIOs do not implement the BIO_CTRL_DUP ctrl required to make
this work.
Thirdly, if rbio == wbio in the original SSL object, then an attempt is made
to up-ref the BIO in the new SSL object - even though it hasn't been set
yet and is NULL. This results in a crash.
This appears to have been broken for a very long time with at least some of
the problems described above coming from SSLeay. The simplest approach is
to just remove this capability from the function.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/12180)
