For this adaptation, the variables $options and $version needed to
move to %config in Configure, and why not move all other variables
holding diverse version numbers at the same time?
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
For our own convenience, we need a mechanism to be able to fall back
on bundled Perl modules. It's a minimal package that's called like
this:
use with_fallback qw(Module1 Module2 ...);
For each module, it will try to require them from the system
installation, and failing that, it will temporarly add external/perl
and try to require transfer::{ModuleName}. It requires that each
bundled Perl modules is accompanied by a small transfer module
(external/perl/transfer/ModuleName.pm in our example) that knows
exactly what to load.
Reviewed-by: Rich Salz <rsalz@openssl.org>
apps/CA.pl and tools/c_rehash are built from template files. So far,
this was done by Configure, which created its own problems as it
forced everyone to reconfigure just because one of the template files
had changed.
Instead, have those files created as part of the normal build in apps/
and in tools/.
Furthermore, this prepares for a future where Configure may produce
entirely other build files than Makefile, and the latter can't be
guaranteed to be the holder of all information for other scripts.
Instead, configdata.pm (described below) becomes the center of
configuration information.
This introduces a few new things:
%config a hash table to hold all kinds of configuration data
that can be used by any other script.
configdata.pm a perl module that Configure writes. It currently
holds the hash tables %config and %target.
util/dofile.pl a script that takes a template on STDIN and outputs
the result after applying configuration data on it.
It's supposed to be called like this:
perl -I$(TOP) -Mconfigdata < template > result
or
perl -I$(TOP) -Mconfigdata templ1 templ2 ... > result
Note: util/dofile.pl requires Text::Template.
As part of this changed, remove a number of variables that are really
just copies of entries in %target, and use %target directly. The
exceptions are $target{cflags} and $target{lflags}, they do get copied
to $cflags and $lflags. The reason for this is that those variable
potentially go through a lot of changes and would rather deserve a
place in %config. That, however, is for another commit.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
--prefix is now exclusively used for software and manual installation.
--openssldir is not exclusively used as a default location for certs,
keys and the default openssl.cnf.
This change is made to bring clarity, to have the two less
intertwined, and to be more compatible with the usual ways of software
installation.
Please change your habits and scripts to use --prefix rather than
--openssldir for installation location now.
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
The GOST engine is now out of date and is removed by this commit. An up
to date GOST engine is now being maintained in an external repository.
See:
https://wiki.openssl.org/index.php/Binaries
Reviewed-by: Richard Levitte <levitte@openssl.org>
Author: Remi Gacogne <rgacogne-github@coredump.fr>
GH334: Add an OCSP_SINGLERESP_get0_id() accessor to the OCSP_CERTID of
a OCSP_SINGLERESP. It is possible to do it the other way around using
OCSP_resp_find(), but this is more efficient when you have a tree indexed
by OCSP_CERTID, like haproxy does. (This is also RT4251)
Author: Marek Klein <kleinmrk@gmail.com>
GH556: OCSP_resp_get_produced_at() accessor to the producedAt of a
OCSP_BASICRESP
GH555: TS_STATUS_INFO_get_status(), TS_STATUS_INFO_get_text() and
TS_STATUS_INFO_get_failure_info() accessors for a TS_STATUS_INFO
Signed-off-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
It seems that the r modifier for s/// is fairly new. It's reported
not to exist in perl 5.10.1, so it's better to avoid it when
possible.
Reviewed-by: Tim Hudson <tjh@openssl.org>
The entropy-gathering daemon is used only on a small number of machines.
Provide a configure knob so that EGD support can be disabled by default
but re-enabled on those systems that do need it.
Reviewed-by: Dr. Stephen Henson <steve@openssl.org>
It turns out that -pause calls the undocumented function SSL_set_debug.
That just sets flag inside the SSL structure. That flag, despite
the command is never used. So remove the flag, the field, and the
function.
Reviewed-by: Richard Levitte <levitte@openssl.org>
util/mk1mf.pl was relying on the platform having the 'debug-' prefix
for doing a debug build. Since the setup of targets has changed, this
is no longer true. However, it can look for '--debug' in the command
line options.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Add CRYPTO_EX_DATA add EndC_KEY_[gs]et_method, From Roumen Petrov.
Had to add various exdata calls to init/copy/free the exdata.
Had to remove const from some EC functions because exdata isn't
const-correct. :(
Also remove EC_EXTRA_DATA and use a union to hold the possible
pre-computed values and an enum to tell which value is in the
union. (Rich Salz)
Reviewed-by: Dr. Stephen Henson <steve@openssl.org>
It was assumed that the syntax FOO/Foo=PROCEDURE would create both an
upper case and mixed case symbol in the GST. Not so, it requires
having both FOO/Foo=PROCEDURE (to create the upper case alias) and
Foo=PROCEDURE (to create the mixed case slot).
We make sure that any symbol always occupies two slots (even those
that don't exist) by filling up with SPARE when necessary. That will
assure that any changes will still have the same symbols in the same
slots no matter what (save a complete rewrite of the ordinals files).
Reviewed-by: Rich Salz <rsalz@openssl.org>
It was assumed that a dummy with the type PRIVATE_PROCEDURE would
simply occupy a slot but otherwise ignore the symbol. Not so, but
there is SPARE for that purpose.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Make LHASH_OF use static inline functions.
Add new lh_get_down_load and lh_set_down_load functions and their
typesafe inline equivalents.
Make lh_error a function instead of a macro.
Reviewed-by: Rich Salz <rsalz@openssl.org>
These now take and return unsigned long, and get is constified.
Updated related documentation and util/ssleay.num
Reviewed-by: Matt Caswell <matt@openssl.org>
In order for mkdep to find #ifdef'd functions, they must be
wrapped (in the header file) with
#ifndef OPENSSL_NO_...
So do that for various CRYPTO_mem_debug... things.
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
Only two macros CRYPTO_MDEBUG and CRYPTO_MDEBUG_ABORT to control this.
If CRYPTO_MDEBUG is not set, #ifdef out the whole debug machinery.
(Thanks to Jakob Bohm for the suggestion!)
Make the "change wrapper functions" be the only paradigm.
Wrote documentation!
Format the 'set func' functions so their paramlists are legible.
Format some multi-line comments.
Remove ability to get/set the "memory debug" functions at runtme.
Remove MemCheck_* and CRYPTO_malloc_debug_init macros.
Add CRYPTO_mem_debug(int flag) function.
Add test/memleaktest.
Rename CRYPTO_malloc_init to OPENSSL_malloc_init; remove needless calls.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Applications wishing to include their own stacks now just need to include
DEFINE_STACK_OF(foo)
in a header file.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Change DECLARE_STACK_OF into inline functions. This avoids the need for
auto generated mkstack.pl macros and now handles const properly.
Reviewed-by: Richard Levitte <levitte@openssl.org>
If the client sends a status_request extension in the ClientHello
and the server responds with a status_request extension in the
ServerHello then normally the server will also later send a
CertificateStatus message. However this message is *optional* even
if the extensions were sent. This adds a test to ensure that if
the extensions are sent then we can still omit the message.
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
Rename to OPENSSL_mem_debug_{push,pop}.
Remove simple calls; keep only calls used in recursive functions.
Ensure we always push, to simplify so that we can always pop
Reviewed-by: Richard Levitte <levitte@openssl.org>
Just like *_clear_free routines. Previously undocumented, used
a half-dozen times within OpenSSL source.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Rename BUF_{strdup,strlcat,strlcpy,memdup,strndup,strnlen}
to OPENSSL_{strdup,strlcat,strlcpy,memdup,strndup,strnlen}
Add #define's for the old names.
Add CRYPTO_{memdup,strndup}, called by OPENSSL_{memdup,strndup} macros.
Reviewed-by: Tim Hudson <tjh@openssl.org>
The previous commit introduced a new file format for ssleay.num and
libeay.num, i.e. the introduction of a version field. Therefore the update
capability in mkdef.pl needs updating to take account of the new format.
Reviewed-by: Richard Levitte <levitte@openssl.org>
On Linux when creating the .so file we were exporting all symbols. We should
only be exporting public symbols. This commit fixes the issue. It is only
applicable to linux currently although the same technique may work for other
platforms (e.g. Solaris should work the same way).
This also adds symbol version information to our exported symbols.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Looking over names, it seems like we usually use names ending with
_new and _free as object constructors and destructors. Also, since
EVP_MD_CTX_init is now used to reset a EVP_MD_CTX, it might as well be
named accordingly.
Reviewed-by: Rich Salz <rsalz@openssl.org>
This only gets used to set a specific curve without actually checking that the
peer supports it or not and can therefor result in handshake failures that can
be avoided by selecting a different cipher.
Reviewed-by: Dr. Stephen Henson <steve@openssl.org>
Add CRYPTO_free_ex_index (for shared libraries)
Unify and complete the documentation for all "ex_data" API's and objects.
Replace xxx_get_ex_new_index functions with a macro.
Added an exdata test.
Renamed the ex_data internal datatypes.
Reviewed-by: Matt Caswell <matt@openssl.org>
Implements Thread Local Storage in the windows async port. This also has
some knock on effects to the posix and null implementations.
Reviewed-by: Rich Salz <rsalz@openssl.org>
In theory the pthreads approach for Thread Local Storage should be more
portable.
This also changes some APIs in order to accommodate this change. In
particular ASYNC_init_pool is renamed ASYNC_init_thread and
ASYNC_free_pool is renamed ASYNC_cleanup_thread. Also introduced ASYNC_init
and ASYNC_cleanup.
Reviewed-by: Rich Salz <rsalz@openssl.org>
There are potential deadlock situations that can occur if code executing
within the context of a job aquires a lock, and then pauses the job. This
adds an ability to temporarily block pauses from occuring whilst performing
work and holding a lock.
Reviewed-by: Rich Salz <rsalz@openssl.org>
During development some functions got added and then later taken away.
Since these will never appear in a production version there is no reason
for them to appear in libeay.num flagged as "NOEXIST".
Reviewed-by: Rich Salz <rsalz@openssl.org>
It is expensive to create the ASYNC_JOB objects due to the "makecontext"
call. This change adds support for pools of ASYNC_JOB objects so that we
don't have to create a new ASYNC_JOB every time we want to use one.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Where we can we should use longjmp and setjmp in preference to swapcontext/
setcontext as they seem to be more performant.
Reviewed-by: Rich Salz <rsalz@openssl.org>
This engine is for developers of async aware applications. It simulates
asynchronous activity with external hardware. This initial version supports
SHA1 and RSA. Certain operations using those algorithms have async job
"pauses" in them - using the new libcrypto async capability.
Reviewed-by: Rich Salz <rsalz@openssl.org>
