Typos in doc/man* will be fixed in a different commit.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20910)
We optimise locking in rsa_get_blinding() so that we normally take a
read lock, and only fallback to a write lock if we need to. This will
be very slightly slower in the case of single use RSA objects, but should
be significantly better when an RSA object is reused in a multi-threaded
environment. It's probably worth the trade off.
Partially fixes#20286
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20953)
This is about a timing leak in the topmost limb
of the internal result of RSA_private_decrypt,
before the padding check.
There are in fact at least three bugs together that
caused the timing leak:
First and probably most important is the fact that
the blinding did not use the constant time code path
at all when the RSA object was used for a private
decrypt, due to the fact that the Montgomery context
rsa->_method_mod_n was not set up early enough in
rsa_ossl_private_decrypt, when BN_BLINDING_create_param
needed it, and that was persisted as blinding->m_ctx,
although the RSA object creates the Montgomery context
just a bit later.
Then the infamous bn_correct_top was used on the
secret value right after the blinding was removed.
And finally the function BN_bn2binpad did not use
the constant-time code path since the BN_FLG_CONSTTIME
was not set on the secret value.
In order to address the first problem, this patch
makes sure that the rsa->_method_mod_n is initialized
right before the blinding context.
And to fix the second problem, we add a new utility
function bn_correct_top_consttime, a const-time
variant of bn_correct_top.
Together with the fact, that BN_bn2binpad is already
constant time if the flag BN_FLG_CONSTTIME is set,
this should eliminate the timing oracle completely.
In addition the no-asm variant may also have
branches that depend on secret values, because the last
invocation of bn_sub_words in bn_from_montgomery_word
had branches when the function is compiled by certain
gcc compiler versions, due to the clumsy coding style.
So additionally this patch stream-lined the no-asm
C-code in order to avoid branches where possible and
improve the resulting code quality.
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20281)
This reverts commit b1892d21f8.
Except for the moving derive_kdk to a separate function.
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20281)
S390x has to ability to offload modular exponentiation and CRT operations to
Crypto Express Adapters. This possible performance optimization was not yet
used by OpenSSL. Add support for offloading and implement an optimized
version of RSA and DH with it.
The environment variable OPENSSL_s390xcap now recognizes the token "nocex" to
prevent offloading.
Signed-off-by: Juergen Christ <jchrist@linux.ibm.com>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20113)
A timing based side channel exists in the OpenSSL RSA Decryption
implementation which could be sufficient to recover a plaintext across
a network in a Bleichenbacher style attack. To achieve a successful
decryption an attacker would have to be able to send a very large number
of trial messages for decryption. The vulnerability affects all RSA
padding modes: PKCS#1 v1.5, RSA-OEAP and RSASVE.
Patch written by Dmitry Belyavsky and Hubert Kario
CVE-2022-4304
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/13817)
The RSA decryption as implemented before required very careful handling
of both the exit code returned by OpenSSL and the potentially returned
ciphertext. Looking at the recent security vulnerabilities
(CVE-2020-25659 and CVE-2020-25657) it is unlikely that most users of
OpenSSL do it correctly.
Given that correct code requires side channel secure programming in
application code, we can classify the existing RSA decryption methods
as CWE-676, which in turn likely causes CWE-208 and CWE-385 in
application code.
To prevent that, we can use a technique called "implicit rejection".
For that we generate a random message to be returned in case the
padding check fails. We generate the message based on static secret
data (the private exponent) and the provided ciphertext (so that the
attacker cannot determine that the returned value is randomly generated
instead of result of decryption and de-padding). We return it in case
any part of padding check fails.
The upshot of this approach is that then not only is the length of the
returned message useless as the Bleichenbacher oracle, so are the
actual bytes of the returned message. So application code doesn't have
to perform any operations on the returned message in side-channel free
way to remain secure against Bleichenbacher attacks.
Note: this patch implements a specific algorithm, shared with Mozilla
NSS, so that the attacker cannot use one library as an oracle against the
other in heterogeneous environments.
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/13817)
Since OPENSSL_malloc() and friends report ERR_R_MALLOC_FAILURE, and
at least handle the file name and line number they are called from,
there's no need to report ERR_R_MALLOC_FAILURE where they are called
directly, or when SSLfatal() and RLAYERfatal() is used, the reason
`ERR_R_MALLOC_FAILURE` is changed to `ERR_R_CRYPTO_LIB`.
There were a number of places where `ERR_R_MALLOC_FAILURE` was reported
even though it was a function from a different sub-system that was
called. Those places are changed to report ERR_R_{lib}_LIB, where
{lib} is the name of that sub-system.
Some of them are tricky to get right, as we have a lot of functions
that belong in the ASN1 sub-system, and all the `sk_` calls or from
the CRYPTO sub-system.
Some extra adaptation was necessary where there were custom OPENSSL_malloc()
wrappers, and some bugs are fixed alongside these changes.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19301)
As the potential failure of getting lock, we need to check the return
value of the BN_BLINDING_lock() in order to avoid the dirty data.
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/17642)
with AVX512_IFMA + AVX512_VL instructions, primarily for RSA CRT private key
operations. It uses 256-bit registers to avoid CPU frequency scaling issues.
The performance speedup for RSA2k signature on ICL is ~2x.
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/13750)
Some functions that lock things are void, so we just return early.
Also make ossl_namemap_empty return 0 on error. Updated the docs, and added
some code to ossl_namemap_stored() to handle the failure, and updated the
tests to allow for failure.
Fixes: #14230
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14238)
This includes error reporting for libcrypto sub-libraries in surprising
places.
This was done using util/err-to-raise
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/13318)
Automatically rename all instances of _with_libctx() to _ex() as per
our coding style.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/12970)
This macro is used to determine if certain pieces of code should
become part of the FIPS module or not. The old name was confusing.
Fixes#11538
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/11539)
At various points in crypto/rsa we need to get random numbers. We should
ensure that we use the correct libctx when doing so.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/11355)
Use of the low level RSA functions has been informally discouraged for a
long time. We now formally deprecate them.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/11063)
RSA ASYM_CIPHER was already available within the default provider. We
now make it also available from inside the FIPS module.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/10881)
Apart from public and internal header files, there is a third type called
local header files, which are located next to source files in the source
directory. Currently, they have different suffixes like
'*_lcl.h', '*_local.h', or '*_int.h'
This commit changes the different suffixes to '*_local.h' uniformly.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9333)
Currently, there are two different directories which contain internal
header files of libcrypto which are meant to be shared internally:
While header files in 'include/internal' are intended to be shared
between libcrypto and libssl, the files in 'crypto/include/internal'
are intended to be shared inside libcrypto only.
To make things complicated, the include search path is set up in such
a way that the directive #include "internal/file.h" could refer to
a file in either of these two directoroes. This makes it necessary
in some cases to add a '_int.h' suffix to some files to resolve this
ambiguity:
#include "internal/file.h" # located in 'include/internal'
#include "internal/file_int.h" # located in 'crypto/include/internal'
This commit moves the private crypto headers from
'crypto/include/internal' to 'include/crypto'
As a result, the include directives become unambiguous
#include "internal/file.h" # located in 'include/internal'
#include "crypto/file.h" # located in 'include/crypto'
hence the superfluous '_int.h' suffixes can be stripped.
The files 'store_int.h' and 'store.h' need to be treated specially;
they are joined into a single file.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9333)
Blinding is performed more efficiently and securely if MONT_CTX for public
modulus is available by the time blinding parameter are instantiated. So
make sure it's the case.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7586)
In [most common] case of p and q being of same width, it's possible to
replace CRT modulo operations with Montgomery reductions. And those are
even fixed-length Montgomery reductions...
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/6915)
* Introduce RSA_generate_multi_prime_key to generate multi-prime
RSA private key. As well as the following functions:
RSA_get_multi_prime_extra_count
RSA_get0_multi_prime_factors
RSA_get0_multi_prime_crt_params
RSA_set0_multi_prime_params
RSA_get_version
* Support EVP operations for multi-prime RSA
* Support ASN.1 operations for multi-prime RSA
* Support multi-prime check in RSA_check_key_ex
* Support multi-prime RSA in apps/genrsa and apps/speed
* Support multi-prime RSA manipulation functions
* Test cases and documentation are added
* CHANGES is updated
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
(Merged from https://github.com/openssl/openssl/pull/4241)
this part contains only the return (x) fix.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4223)
To make it consistent in the code base
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
(Merged from https://github.com/openssl/openssl/pull/3749)
The flags RSA_FLAG_NO_CONSTTIME, DSA_FLAG_NO_EXP_CONSTTIME and
DH_FLAG_NO_EXP_CONSTTIME which previously provided the ability to switch
off the constant time implementation for RSA, DSA and DH have been made
no-ops and deprecated.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Move rsa_st away from public headers.
Add accessor/writer functions for the public RSA data.
Adapt all other source to use the accessors and writers.
Reviewed-by: Matt Caswell <matt@openssl.org>
