After reviewing the FIPS 140-3 IG self tests requirements the following
were added:
- TDES Decryption (Not sure why this was missing)
- DH changed to use ffdhe2048 instead of P,Q,G params.
- Signature code has been changed to use a msg rather than a digest as input.
(Since some digests dont provide the one shot API, the EVP_DigestSignFinal and
EVP_DigestVerifyFinal needed to be exposed to the FIPS provider). The
code is now shared between ED and the other key types.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/25217)
This is a FIPS 140-3 requirement.
It should not be done as a FIPS indicator.
Reviewed-by: Paul Dale <ppzgs1@gmail.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/25147)
FIPS KAS requires use of ECC CDH.
The EC 'B' and 'K' curves have a cofactor that is not 1, and this
MUST be multiplied by the private key when deriving the shared secret.
Reviewed-by: Paul Dale <ppzgs1@gmail.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/25139)
FIPS providers need to specify identifiable names and versions. Allow
to customize the fips provider name prefix, via VERSION.dat which
already allows to customize version & buildinfo. With this patch
in-place it removes the need of patching code to set customized
provider name.
E.g. echo FIPS_VENDOR=ACME >> VERSION.dat, results in
```
$ OPENSSL_CONF=fips-and-base.cnf ../util/wrap.pl ../apps/openssl list -providers --verbose
Providers:
base
name: OpenSSL Base Provider
version: 3.4.0
status: active
build info: 3.4.0-dev
gettable provider parameters:
name: pointer to a UTF8 encoded string (arbitrary size)
version: pointer to a UTF8 encoded string (arbitrary size)
buildinfo: pointer to a UTF8 encoded string (arbitrary size)
status: integer (arbitrary size)
fips
name: ACME FIPS Provider for OpenSSL
version: 3.4.0
status: active
build info: 3.4.0-dev
gettable provider parameters:
name: pointer to a UTF8 encoded string (arbitrary size)
version: pointer to a UTF8 encoded string (arbitrary size)
buildinfo: pointer to a UTF8 encoded string (arbitrary size)
status: integer (arbitrary size)
security-checks: integer (arbitrary size)
tls1-prf-ems-check: integer (arbitrary size)
drbg-no-trunc-md: integer (arbitrary size)
```
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Neil Horman <nhorman@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/24368)
See FIPS 140-3 IG Section 10.3.A Part 11
Indicates ECDSA requires a sign and verify test.
Note 11 states that HashEdDSA is not required to be tested if PureEdDSA is tested.
Note 12 indicates that both ED25519 and X448 need to be tested.
Since ED uses the oneshot interface, additional API's needed to be exposed to the
FIPS provider using #ifdef FIPS_MODULE.
Changed ED25518 and ED448 to use fips=true in the FIPS provider.
Updated documentation for provider lists for EDDSA.
Reviewed-by: Paul Dale <ppzgs1@gmail.com>
Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22112)
Using this option disables the OpenSSL FIPS provider
self tests.
This is intended for debugging purposes only,
as it breaks FIPS compliance.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/25063)
Since FIPS provider performs lower bound check by default from v3.0, the
default value for new configurable item will be one.
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/24120)
In FIPS 140-3, RSA Signing with X9.31 padding is not approved,
but verification is allowed for legacy purposes. An indicator has been added
for RSA signing with X9.31 padding.
A strict restriction on the size of the RSA modulus has been added
i.e. It must be 1024 + 256 * s (which is part of the ANSI X9.31 spec).
Added implementation comments to the X9.31 padding code
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <ppzgs1@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/24021)
This leaves 3DES with the FIPS query "FIPS=yes", which allows
Triple-DES to be used for Decryption by default.
Disallow CMAC using Triple-DES in FIPS.
This does not use a FIPS indicator.
Reviewed-by: Neil Horman <nhorman@openssl.org>
Reviewed-by: Paul Dale <ppzgs1@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/24960)
This is a FIPS 140-3 requirement.
This uses a FIP indicator if either the FIPS configurable "dsa_sign_disabled" is set to 0,
OR OSSL_SIGNATURE_PARAM_FIPS_SIGN_CHECK is set to 0 in the dsa signing context.
Reviewed-by: Neil Horman <nhorman@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/24799)
Found by running the checkpatch.pl Linux script to enforce coding style.
Reviewed-by: Neil Horman <nhorman@openssl.org>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22097)
The `memset(3)` just happened to work because 2s complement.
This is more robust.
Also reduced the size of the indicator structure.
Reviewed-by: Tom Cosgrove <tom.cosgrove@arm.com>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/24923)
Each provider algorithm context can use these helpers to add indicator
support.
Reviewed-by: Neil Horman <nhorman@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/24623)
Add a FIPS indicator callback that can be set via
OSSL_INDICATOR_set_callback(). This callback is intended to be run
whenever a non approved algorithm check has occurred and strict checking
has been disabled.The callback may be used to
log non approved algorithms. The callback is passed a type and
description string as well as the cbarg specified in OSSL_INDICATOR_set_callback.
The return value can be either 0 or 1.
A value of 0 can be used for testing purposes to force an error to occur from the algorithm
that called the callback.
Reviewed-by: Neil Horman <nhorman@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/24623)
Once RNG is used, triggering FIPS on-demand self tests (via
OSSL_PROVIDER_self_test() API) crashes the application. This happens because the
RNG context is stored before self tests, and restored after their execution.
In the meantime - before context restoration - RAND_set0_private() function is
called, which decrements the stored RNG context reference counter and frees it.
To resolve the issue, the stored RNG context refcount has been incremented via
the EVP_RAND_CTX_up_ref() API to avoid its deallocation during the RNG context
switch performed by the self test function.
The provider_status_test test has been updated to reproduce the issue as
a regression test.
Signed-off-by: Karol Brzuskiewicz <kabr@arista.com>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Tom Cosgrove <tom.cosgrove@arm.com>
Reviewed-by: Paul Dale <ppzgs1@gmail.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/24599)
Fixes: #23979
Previously fips module relied on OPENSSL_cpuid_setup
being used as constructor by the linker to correctly
setup the capability vector, either via .section .init
(for x86_64) or via __attribute__((constructor)).
This would make ld.so call OPENSSL_cpuid_setup before
the init function for fips module. However, this early
constructing behavior has several disadvantages:
1. Not all platform/toolchain supports such behavior
2. Initialisation sequence is not well defined, and
some function might not be initialized when cpuid_setup
is called
3. Implicit path is hard to maintain and debug
Reviewed-by: Paul Dale <ppzgs1@gmail.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/24419)
Reviewed-by: Neil Horman <nhorman@openssl.org>
Release: yes
(cherry picked from commit 0ce7d1f355)
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/24034)
According to NIST SP 800-131Ar2 section 8, the length of the
key-derivation key shall be at least 112 bits.
Reviewed-by: Tom Cosgrove <tom.cosgrove@arm.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/23833)
We were neglecting to register the main thread to receive thread stop
notifications. This is important if the thread that starts the FIPS
provider is not the same one that is used when OPENSSL_cleanup() is
called.
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21964)
Rather than instantiate the private and primary DRBGs during the
selftest, instead use a test RNG. This leaves the DRBG setup
pristine and permits later replacement of the seed source despite
the very early running power up self tests.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21964)
The FIPS provider accesses it's current state under lock.
This is overkill, little or no synchronisation is actually required in
practice (because it's essentially a read only setting). Switch to using
TSAN operations in preference.
Fixes#21179
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21187)
This can effectively reduce the binary size for platforms
that don't need ECX feature(~100KB).
Signed-off-by: Yi Li <yi1.li@intel.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20781)
Fixes#20710
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20745)
Add option for restricting digests available to DRBGs.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/20521)
NIST SP 800-132 [1] section 5.1 says "[t]he length of the
randomly-generated portion of the salt shall be at least
128 bits", which implies that the salt for PBKDF2 must be at least 16
bytes long (see also Appendix A.2.1).
The FIPS 140-3 IG [2] section 10.3.A requires that "the lengths and the
properties of the Password and Salt parameters, as well as the desired
length of the Master Key used in a CAST shall be among those supported
by the module in the approved mode."
As a consequence, the salt length in the self test must be at least 16
bytes long for FIPS 140-3 compliance. Switch the self test to use the
only test vector from RFC 6070 that uses salt that is long enough to
fulfil this requirement. Since RFC 6070 does not provide expected
results for PBKDF2 with HMAC-SHA256, use the output from [3], which was
generated with python cryptography, which was tested against the RFC
6070 vectors with HMAC-SHA1.
[1]: https://doi.org/10.6028/NIST.SP.800-132
[2]: https://csrc.nist.gov/CSRC/media/Projects/cryptographic-module-validation-program/documents/fips%20140-3/FIPS%20140-3%20IG.pdf
[3]: https://github.com/brycx/Test-Vector-Generation/blob/master/PBKDF2/pbkdf2-hmac-sha2-test-vectors.md
Signed-off-by: Clemens Lang <cllang@redhat.com>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20429)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/20386)
This reverts commit 09627a8ceb.
NIST isn't allowing EdDSA at this stage after all, so flag it as not
FIPS approved in the FIPS provider. Guidance for FIPS 140-3 is expected
later this month:
The use of EdDSA still remains non-approved.
Before the FIPS 186-5 and SP 800-186 algorithms / curves can be
used in the approved mode, the CMVP will need to do (at least)
the following:
* Incorporate FIPS 186-5 and SP 800-186 into SP 800-140C/D;
* Update IG 10.3.A to incorporate self-test requirements for the
new algorithms/curves.
* Write a new IG on this transition to clarify the issues raised in
this thread and elsewhere and provide a clear transition schedule.
The CMVP is working on all three of these items and hope to have
drafts public by the end of March.
Since security relevant changes are not permitted for new 140-2
submissions, and under the assumption that this transition away
from FIPS 186-4 algorithms will be 'soft' and not move modules to
the historical list, we do not plan on writing 140-2 guidance for
this transition.
It seems unlikely that all of these requirements will be completed before
we submit.
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20343)
CMVP's answer when questioned about this being:
X448 and X25519 uses Curve448 and Curve25519, respectfully, within an
ECDH scheme. Therefore, it is possible for a key agreement scheme
that uses Curve448 and Curve25519 to be used in the approved mode
and be viewed as an allowed algorithm if requirements of Scenario
X2 of IG D.8 and IG A.2 are met (or Scenario 3 of D.F and IG C.A for
FIPS 140-3). The use of EdDSA in the approved mode is not permitted
until FIPS 186-5 is published and part of CMVP guidance.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20079)
Likewise for the related ECX key exchanges.
NIST is mandating this until FIPS 186-5 is finalised.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20020)
And so clean a few useless includes
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19721)
