Once we have decided that a stream has an implicit length then we should
treat the packet as full and not try to add any more stream related frames
to the packet.
Fixes#22658
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22662)
quic_multistream test was issuing a signal on a condvar after dropping
the corresponding mutex, not before, leading to potential race
conditions in the reading of the associated data
Fixes#22588
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22616)
The short circuit in the remove function when the element is the last in the
heap, failed to add the removed slot back to the freelist.
Fixes#22644
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22646)
The `aarch64-linux-android33-clang` cross-compiler (v14.0.6)
complains twice about an unsupported '%n' format specifier,
preventing a successful `--strict-warnings` build:
error: '%n' specifier not supported on this platform [-Werror,-Wformat]
BIO_snprintf(buf, buflen, "%s%s%n%08x.%s%d",
This is a false positive, because BIO_snprintf() implements its
own format parsing (which is implemented in the _dopr() function).
This commit fixes the problem by rewriting the code to dispense with
the dubious '%n' format specifier. As a side-effect, the code becomes
a little bit more comprehensible and self-explaining.
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22511)
This avoids code duplication and provides variable-size support
for BLAKE2s like 786b9a8
Test data obtained with libb2 with the following programs:
==> b2.c <==
#include <blake2.h>
#include <unistd.h>
int main() {
char buf[16] = {};
blake2s(buf, 0, 0, 16, 0, 0);
write(1, buf, 16);
}
==> b3.c <==
#include <blake2.h>
#include <unistd.h>
int main() {
char buf[10] = {};
blake2s(buf, "\x61", 0, 10, 1, 0);
write(1, buf, 10);
}
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22444)
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22638)
-update run command to include LD_LIBRARY_PATH
-suggest installing libnghttp3-dev on Ubuntu
-drop "-f" from clean recipe (it is already included in $(RM))
Part of https://github.com/openssl/project/issues/253
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22623)
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22636)
There are comments in include/openssl/dh.h and include/internal/ffc.h
that they must be aligned with each other, and yet, clashes have been
introduced.
The simplest fix is to move the offending FFC flags out of the way, as they
are indeed internal and shouldn't affect any public interface, apart from
those that are aligned with the DH flags, which are public.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22453)
We already check for an excessively large P in DH_generate_key(), but not in
DH_check_pub_key(), and none of them check for an excessively large Q.
This change adds all the missing excessive size checks of P and Q.
It's to be noted that behaviours surrounding excessively sized P and Q
differ. DH_check() raises an error on the excessively sized P, but only
sets a flag for the excessively sized Q. This behaviour is mimicked in
DH_check_pub_key().
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22453)
It would be nice if we could monitor the consistency of our ABI from PR to PR,
to ensure there are no inadvertent changes to the library ABI.
Introduce a new CI job that runs the libabigail tools to build an ABI
representation of the PR-built library and compares it to a stored/expected
representation, reporting any discrepancies it finds.
Fixes#22571
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22589)
txp_generate_stream_frames() plans chunks of data to send via the
function txp_plan_stream_chunk(). That function may clamp the amount in
the chunk due to flow control, even though there is more available to send.
We should take this into account when deciding whether or not to try
serializing the next chunk.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22601)
Fixes Coverity 1548382
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22606)
Fixes Coverity 1548383
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22606)
As per recommendation by jfinkhaeuser, this documents the defaults for
KMAC-128 as 32 and for KMAC-256 as 64. The code already accomodates for
these values, so no changes are needed there.
Fixes#22381
CLA: trivial
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22614)
The macro was introduced in commit ed6dfd1e36 without an
openssl-specific prefix as mandated by the coding style.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Tom Cosgrove <tom.cosgrove@arm.com>
(Merged from https://github.com/openssl/openssl/pull/22603)
Also make sure the key is not set if the key
length is changed on the context after the key was
set previously.
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22590)
@mspncp noted that the condition should have been likely not unlikely.
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
Reviewed-by: Tom Cosgrove <tom.cosgrove@arm.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22593)
Enable the quic-client fuzzer to accept and create new streams
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22592)
In testing the quic demos, I found that the quicserver refused to start for me,
indicating an inability to bind a socket to listen on
The problem turned out to be that getaddrinfo on my system was returning
multiple entries, due to the fact that /etc/host maps the localhost host name to
both ipv4 (127.0.0.1) and ipv6 (::1), but returns the latter as an ipv4 mapped
address (specifying family == AF_INET)
It seems like the proper fix would be to modify the /etc/hosts file to not make
that mapping, and indeed that works. However, since several distribution ship
with this setup, it seems like it is worthwhile to manage it in the server code.
its also that some other application may be bound to a given address/port
leading to failure, which I think could be considered erroneous, as any failure
for the full addrinfo list in quicserver would lead to a complete failure
Fix this by modifying the create_dgram_bio function to count the number of
sockets is successfully binds/listens on, skipping any failures, and only exit
the application if the number of bound sockets is zero.
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22559)
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tom Cosgrove <tom.cosgrove@arm.com>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22516)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tom Cosgrove <tom.cosgrove@arm.com>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22583)
ossl_quic_sstream_is_totally_acked would return 0
if no data had been appended to the stream yet.
Fixed and added tests.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22580)
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22585)
The demo code has changed to accept the hostname/port on the command line.
We update the tutorials to keep in sync with the demo code.
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22552)
