These were added in #25548 but didn't include a FIPS version check which
causes failures testing older FIPS providers against later versions.
Also change some skips to use TEST_skip.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/25582)
The code was not detecting that the cofactor was set up correctly
if OSSL_PKEY_PARAM_USE_COFACTOR_ECDH was set, resulting in an incorrect
FIPS indicator error being triggered.
Added a test for all possible combinations of a EVP_PKEY setting
OSSL_PKEY_PARAM_USE_COFACTOR_ECDH and the derive context setting
OSSL_EXCHANGE_PARAM_EC_ECDH_COFACTOR_MODE.
This only affects the B & K curves (which have a cofactor that is not 1).
Bug reported by @abkarcher
Testing this properly, also detected a memory leak of privk when the
FIPS indicator error was triggered (in the case where mode = 0 and
use_cofactor was 1).
Reviewed-by: Paul Dale <ppzgs1@gmail.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/25548)
Similar to other KDFs, the input key should be 112 bits long.
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Paul Dale <ppzgs1@gmail.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/25529)
Document new command line options added in 3.4.0
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Paul Dale <ppzgs1@gmail.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/25546)
Document new command line options added in 3.2.0
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Paul Dale <ppzgs1@gmail.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/25546)
Document new command line options added in 3.1.0
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Paul Dale <ppzgs1@gmail.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/25546)
Documents when the command was added.
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Paul Dale <ppzgs1@gmail.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/25546)
See Section 5 Key Agreement Using Diffie-Hellman and MQV of
[NIST SP 800-131Ar2](https://nvlpubs.nist.gov/nistpubs/SpecialPublications/NIST.SP.800-131Ar2.pdf).
Strengths less than 112bits is disallowed, thus eliminating SHA1.
Skip cms test case that requires use of SHA1 with X9.42 DH.
Rename ossl_fips_ind_digest_check to ossl_fips_ind_digest_exch_check
Add myself to Changes for fips indicator work
Reviewed-by: Paul Dale <ppzgs1@gmail.com>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/25517)
Use non-usual params of pkcs11 module will trigger a null ptr deref bug. Fix it for #25493
CLA: trivial
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/25496)
The quic implementation defined a set of LIST_* macros for list
manipulation, which conflicts with the generally support BSD api found
in the queue.h system header. While this isn't normally a problem, A
report arrived indicating that MacOSX appears to implicitly include
queue.h from another system header which causes definition conflicts.
As the openssl macros are internal only, it seems the most sensible
thing to do is place them in a well known namespace for our library to
avoid the conflict, so add an OSSL_ prefix to all our macros
Fixes#25516
Reviewed-by: Paul Dale <ppzgs1@gmail.com>
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Tom Cosgrove <tom.cosgrove@arm.com>
Reviewed-by: Saša Nedvědický <sashan@openssl.org>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/25519)
Force the use of the derivation function when creating OpenSSL's internal
DRBGs.
FIPS mandates the use of a derivation function, so 3.4 cannot be validated as
it stands which run counter to the indicator work that was included.
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
Reviewed-by: Tom Cosgrove <tom.cosgrove@arm.com>
Reviewed-by: Hugo Landau <hlandau@devever.net>
(Merged from https://github.com/openssl/openssl/pull/25511)
(cherry picked from commit 0ab796ef96)
issuer passed as second parameter to check_issued may result in
NULL dereference
CLA: trivial
Reviewed-by: Hugo Landau <hlandau@devever.net>
Reviewed-by: Paul Dale <ppzgs1@gmail.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/24760)
Fixes#8331: Updated the description for setting the tag length in OCB mode to remove the misleading “when encrypting” and “during encryption” phrasing. This change emphasizes that setting a custom tag length requires a call with NULL, applicable to both encryption and decryption contexts.
Reviewed-by: Frederik Wedel-Heinen <fwh.openssl@gmail.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/25424)
Some of the BE specific permutes were incorrect. Fix them.
This passes all tests on a P10/ppc64 debian unstable host.
Fixes#25451
CLA: trivial
Reviewed-by: Paul Dale <ppzgs1@gmail.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/25483)
For FIPS 140-3 the continuous tests specified in SP 800-90B need to be
included on the output of any entropy source.
They are implemented here as a replacement for the primary DRBG in the FIPS
provider. This results in a setup that looks like this:
+-------------+
| |
| Seed Source |
| |
+------+------+
|
|
v
+-------------+
| |
| CRNG Test |
| |
++----------+-+
| |
| |
v v
+--------------+ +--------------+
| | | |
| Public DRBG | | Private DRBG |
| | | |
+--------------+ +--------------+
An additional benefit, that of avoiding DRBG chains, is also gained.
The current standards do not permit the output of one DRBG to be used
as the input for a second (i.e. a chain).
This also leaves open the future possibility of incorporating a seed
source inside the FIPS boundary.
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/25415)
The EVP_PKEY_Q_keygen function contains a list of algorithm type names
and fails if the requested name is not in the list. This prevents the use
of this function for externally supplied key type names.
We should just assume that any unrecognised key type name does not require
a parameter.
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Paul Dale <ppzgs1@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/25468)
When both -o and -MT are used, GCC 4.1 prints the object file twice in
the dependency file. e.g.:
foo.o foo.o: foo.c
If the file name is long, then the second occurrence moves to the next
line. e.g.:
ssl/statem/libssl-shlib-statem_dtls.o \
ssl/statem/libssl-shlib-statem_dtls.o: ../ssl/statem/statem_dtls.c \
add-depends script scans one line at a time, so when the first line is
processed, the object file becomes a dependency itself.
Fix by removing -MT altogether.
This also fixes makedepend for nonstop platform.
Reviewed-by: Paul Dale <ppzgs1@gmail.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/25455)
fixup: Remove trailing space previously added
Reviewed-by: Neil Horman <nhorman@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/25428)
