Fixes#21198
decoder objects were setting propq as NULL.
Added a set_ctx/settable_ctx to all decoders that should supply
a property query parameter to internal functions.
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21219)
The routines declared in there are entirely libcrypto internal, so
include/crypto/decoder.h is better suited for them.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/21733)
CLA: trivial
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tom Cosgrove <tom.cosgrove@arm.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21692)
Running LSX instructions requires both the hardware support and the
kernel support. The `cpucfg` instruction only tests the hardware
support, causing a SIGILL if the hardware supports LSX but the kernel
does not.
Use `getauxval(AT_HWCAP)` as the ["Software Development and Build
Convention for LoongArch Architectures"][1] manual suggests.
The LOONGARCH_HWCAP_LSX and LOONGARCH_HWCAP_LASX bits are copied from
the manual too. In Glibc 2.38 they'll be provided by <sys/auxv.h> as
well, but they are unavailable in earlier Glibc versions so we cannot
rely on it.
The getauxval syscall and Glibc wrapper are available since day one
(Linux-5.19 and Glibc-2.36) for LoongArch.
Fixes#21508.
[1]:https://github.com/loongson/la-softdev-convention/blob/master/la-softdev-convention.adoc#kernel-constraints
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Tom Cosgrove <tom.cosgrove@arm.com>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21509)
The most expensive part of using a PKEY decoder is the
OSSL_DECODER_CTX_new_for_pkey() call. This builds up all of the decoder
chains, which is a complex and time consuming operation. However, if no
new providers have been loaded/unloaded since the last time it was called
we can expect the same results for the same parameters. Note that this
operation takes place *before* we event parse the data for decoding so it
is not dependent on the parsed data at all.
We introduce a cache for OSSL_DECODER_CTX objects. If we have been called
with the same parameters then we just duplicate an existing
OSSL_DECODER_CTX. This should be significantly faster than creating a new
one every time.
Partially addressed the issue in #15199
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21426)
This is defined in NIST SP 800-208 as the truncation to 192 bits of
SHA256. Unlike other truncated hashes in the SHA2 suite, this variant
doesn't have a different initial state, it is just a pure truncation
of the output.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21180)
This can effectively reduce the binary size for platforms
that don't need ECX feature(~100KB).
Signed-off-by: Yi Li <yi1.li@intel.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20781)
Also remove needless constant_time_* and ERR_clear_error() calls
from OSSL_CRMF_ENCRYPTEDVALUE_get1_encCert().
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/17354)
When freeing the last reference to an EVP_PKEY there is no point in
taking the lock for the key. It is the last reference and is being freed
so must only be being used by a single thread.
This should not have been the source of any contention so its unclear to
what extent this will improve performance. But we should not be locking
when we don't need to.
Partially fixes#20286
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20932)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Todd Short <todd.short@me.com>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/20832)
This reverts commit b1892d21f8.
Except for the moving derive_kdk to a separate function.
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20281)
(And then __arm__ and __arm tests are redundant)
Fixes#20604
Change-Id: I4308e75b7fbf3be7b46490c3ea4125e2d91b00b8
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20620)
Add support for the RFC7250 certificate-type extensions.
Alows the use of only private keys for connection (i.e. certs not needed).
Add APIs
Add unit tests
Add documentation
Add s_client/s_server support
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18185)
In RISC-V we have multiple extensions, that can be
used to accelerate processing.
The known extensions are defined in riscv_arch.def.
From that file test functions of the following
form are generated: RISCV_HAS_$ext().
In recent commits new ways to define the availability
of these test macros have been defined. E.g.:
#define RV32I_ZKND_ZKNE_CAPABLE \
(RISCV_HAS_ZKND() && RISCV_HAS_ZKNE())
[...]
#define RV64I_ZKND_ZKNE_CAPABLE \
(RISCV_HAS_ZKND() && RISCV_HAS_ZKNE())
This leaves us with two different APIs to test capabilities.
Further, creating the same macros for RV32 and RV64 results
in duplicated code (see example above).
This inconsistent situation makes it hard to integrate
further code. So let's clean this up with the following steps:
* Replace RV32I_* and RV64I_* macros by RICSV_HAS_* macros
* Move all test macros into riscv_arch.h
* Use "AND" and "OR" to combine tests with more than one extension
* Rename include files for accelerated processing (remove extension
postfix).
We end up with compile time tests for RV32/RV64 and run-time tests
for available extensions. Adding new routines (e.g. for vector crypto
instructions) should be straightforward.
Testing showed no regressions.
Signed-off-by: Christoph Müllner <christoph.muellner@vrull.eu>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20078)
The EVP layer should not rely on the underlying low level code to
handle catching incorrect reuse of contexts.
Add a flag to mark a context as finalised as needed and then catch and
immediately error on Update/Final operations if called improperly.
Signed-off-by: Simo Sorce <simo@redhat.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/20375)
This is an unused internal function. It should be added back
in if there is a need to set this value to something other than
NID_mgf1 (which is not likely).
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20321)
Similiar checks to the DSA code have been added for ECDSA also.
This should not be a problem when using named groups.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20384)
Fixes#20268
Values such as q=1 or priv=0 caused infinite loops when calling
DSA_sign() without these changes.
There are other cases where bad domain parameters may have caused
infinite loops where the retry counter has been added. The simpler case
of priv=0 also hits this case. q=1 caused an infinite loop in the setup.
The max retry value has been set to an arbitrary value of 8 (it is
unlikely to ever do a single retry for valid values).
The minimum q bits was set to an arbitrary value of 128 (160 is still
used for legacy reasons when using 512 bit keys).
Thanks @guidovranken for detecting this, and @davidben for his
insightful analysis.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20384)
These aren't currently checked when they are called in cipher_aes_gcm_hw_armv8.inc,
but they are declared as returning as size_t the number of bytes they have processed,
and the aes_gcm_*_*_kernel (unroll by 4) versions of these do return the correct
values.
Change-Id: Ic3eaf139e36e29e8779b5bd8b867c08fde37a337
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20191)
S390x has to ability to offload modular exponentiation and CRT operations to
Crypto Express Adapters. This possible performance optimization was not yet
used by OpenSSL. Add support for offloading and implement an optimized
version of RSA and DH with it.
The environment variable OPENSSL_s390xcap now recognizes the token "nocex" to
prevent offloading.
Signed-off-by: Juergen Christ <jchrist@linux.ibm.com>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20113)
The unused and untested internal function ossl_a2ucompare() has been
removed.
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/20177)
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(cherry picked from commit 7a21a1b5fa2dac438892cf3292d1f9c445d870d9)
(cherry picked from commit 2ad9928170)
A timing based side channel exists in the OpenSSL RSA Decryption
implementation which could be sufficient to recover a plaintext across
a network in a Bleichenbacher style attack. To achieve a successful
decryption an attacker would have to be able to send a very large number
of trial messages for decryption. The vulnerability affects all RSA
padding modes: PKCS#1 v1.5, RSA-OEAP and RSASVE.
Patch written by Dmitry Belyavsky and Hubert Kario
CVE-2022-4304
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Signed-off-by: Xu Yizhou <xuyizhou1@huawei.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19914)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/19271)
Fixes#6277
Description:
Make each of the five EdDSA instances defined in RFC 8032 -- Ed25519,
Ed25519ctx, Ed25519ph, Ed448, Ed448ph -- available via the EVP APIs.
The desired EdDSA instance is specified via an OSSL_PARAM.
All instances, except for Ed25519, allow context strings as input.
Context strings are passed via an OSSL_PARAM. For Ed25519ctx, the
context string must be nonempty.
Ed25519, Ed25519ctx, Ed448 are PureEdDSA instances, which means that
the full message (not a digest) must be passed to sign and verify
operations.
Ed25519ph, Ed448ph are HashEdDSA instances, which means that the input
message is hashed before sign and verify.
Testing:
All 21 test vectors from RFC 8032 have been added to evppkey_ecx.txt
(thanks to Shane Lontis for showing how to do that). Those 21 test
vectors are exercised by evp_test.c and cover all five instances.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/19705)
The RSA decryption as implemented before required very careful handling
of both the exit code returned by OpenSSL and the potentially returned
ciphertext. Looking at the recent security vulnerabilities
(CVE-2020-25659 and CVE-2020-25657) it is unlikely that most users of
OpenSSL do it correctly.
Given that correct code requires side channel secure programming in
application code, we can classify the existing RSA decryption methods
as CWE-676, which in turn likely causes CWE-208 and CWE-385 in
application code.
To prevent that, we can use a technique called "implicit rejection".
For that we generate a random message to be returned in case the
padding check fails. We generate the message based on static secret
data (the private exponent) and the provided ciphertext (so that the
attacker cannot determine that the returned value is randomly generated
instead of result of decryption and de-padding). We return it in case
any part of padding check fails.
The upshot of this approach is that then not only is the length of the
returned message useless as the Bleichenbacher oracle, so are the
actual bytes of the returned message. So application code doesn't have
to perform any operations on the returned message in side-channel free
way to remain secure against Bleichenbacher attacks.
Note: this patch implements a specific algorithm, shared with Mozilla
NSS, so that the attacker cannot use one library as an oracle against the
other in heterogeneous environments.
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/13817)
This PR is based off the contributions in PR #9223 by Jemmy1228.
It has been modified and reworked to:
(1) Work with providers
(2) Support ECDSA and DSA
(3) Add a KDF HMAC_DRBG implementation that shares code with the RAND HMAC_DRBG.
A nonce_type is passed around inside the Signing API's, in order to support any
future deterministic algorithms.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18809)
Signed-off-by: Xu Yizhou <xuyizhou1@huawei.com>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19619)
This supports all the modes, suites and export mechanisms defined
in RFC9180 and should be relatively easily extensible if/as new
suites are added. The APIs are based on the pseudo-code from the
RFC, e.g. OSS_HPKE_encap() roughly maps to SetupBaseS(). External
APIs are defined in include/openssl/hpke.h and documented in
doc/man3/OSSL_HPKE_CTX_new.pod. Tests (test/hpke_test.c) include
verifying a number of the test vectors from the RFC as well as
round-tripping for all the modes and suites. We have demonstrated
interoperability with other HPKE implementations via a fork [1]
that implements TLS Encrypted ClientHello (ECH) which uses HPKE.
@slontis provided huge help in getting this done and this makes
extensive use of the KEM handling code from his PR#19068.
[1] https://github.com/sftcd/openssl/tree/ECH-draft-13c
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/17172)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/19230)
Reduce the Miller Rabin counts to the values specified by FIPS 186-5.
The old code was using a fixed value of 64.
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19579)
EVP_PKEY_eq() is used to check, among other things, if a certificate
public key corresponds to a private key. When the private key belongs to
a provider that does not allow to export private keys this currently
fails as the internal functions used to import/export keys ignored the
selection given (which specifies that only the public key needs to be
considered) and instead tries to export everything.
This patch allows to propagate the selection all the way down including
adding it in the cache so that a following operation actually looking
for other selection parameters does not mistakenly pick up an export
containing only partial information.
Signed-off-by: Simo Sorce <simo@redhat.com>
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19648)
Add test for `.' overflows, remove the output size argument from
ossl_a2ulabel() since it was never used and greatly complicated the code.
Convert ossl_a2ulabel() to use WPACKET for building the output string.
Update the documentation to match the new definition of ossl_a2ulabel().
x509: let punycode handle the '\0' string termination. Saves a memset(3)
and some size fiddling. Also update to deal with the modified parameters.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/19591)
Some primitives are designed to be used in a multi-threaded environment,
if supported, e.g., Argon2.
This patch adds support for preemptive threading and basic synchronization
primitives for platforms compliant with POSIX threads or Windows CRT.
Native functions are wrapped to provide a common (internal) API.
Threading support can be disabled at compile time. If enabled, threading
is disabled by default and needs to be explicitly enabled by the user.
Thread enablement requires an explicit limit on the number of threads that
OpenSSL may spawn (non-negative integer/infinity). The limit may be changed.
Signed-off-by: Čestmír Kalina <ckalina@redhat.com>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/12255)
Add 128 bit lsx vector expansion optimization code of Loongarch64 architecture
to AES. The test result on the 3A5000 improves performance by about 40%~50%.
Signed-off-by: zhuchen <zhuchen@loongson.cn>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19364)
Since OPENSSL_malloc() and friends report ERR_R_MALLOC_FAILURE, and
at least handle the file name and line number they are called from,
there's no need to report ERR_R_MALLOC_FAILURE where they are called
directly, or when SSLfatal() and RLAYERfatal() is used, the reason
`ERR_R_MALLOC_FAILURE` is changed to `ERR_R_CRYPTO_LIB`.
There were a number of places where `ERR_R_MALLOC_FAILURE` was reported
even though it was a function from a different sub-system that was
called. Those places are changed to report ERR_R_{lib}_LIB, where
{lib} is the name of that sub-system.
Some of them are tricky to get right, as we have a lot of functions
that belong in the ASN1 sub-system, and all the `sk_` calls or from
the CRYPTO sub-system.
Some extra adaptation was necessary where there were custom OPENSSL_malloc()
wrappers, and some bugs are fixed alongside these changes.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19301)
The code is derived from @sftcd's work in PR #17172.
This PR puts the DHKEM algorithms into the provider layer as
KEM algorithms for EC and ECX.
This PR only implements the DHKEM component of HPKE as specified in
RFC 9180.
crypto/hpke/hpke_util.c has been added for fuctions that will
be shared between DHKEM and HPKE.
API's for EVP_PKEY_auth_encapsulate_init() and EVP_PKEY_auth_decapsulate_init()
have been added to support authenticated encapsulation. auth_init() functions
were chosen rather that a EVP_PKEY_KEM_set_auth() interface to support
future algorithms that could possibly need different init functions.
Internal code has been refactored, so that it can be shared between the DHKEM
and other systems. Since DHKEM operates on low level keys it needs to be
able to do low level ECDH and ECXDH calls without converting the keys
back into EVP_PKEY/EVP_PKEY_CTX form. See ossl_ecx_compute_key(),
ossl_ec_public_from_private()
DHKEM requires API's to derive a key using a seed (IKM). This did not sit
well inside the DHKEM itself as dispatch functions. This functionality
fits better inside the EC and ECX keymanagers keygen, since
they are just variations of keygen where the private key is generated
in a different manner. This should mainly be used for testing purposes.
See ossl_ec_generate_key_dhkem().
It supports this by allowing a settable param to be passed to keygen
(See OSSL_PKEY_PARAM_DHKEM_IKM).
The keygen calls code within ec and ecx dhkem implementation to handle this.
See ossl_ecx_dhkem_derive_private() and ossl_ec_dhkem_derive_private().
These 2 functions are also used by the EC/ECX DHKEM implementations to generate
the sender ephemeral keys.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19068)
Properly fallback to the default implementation on CPUs
missing necessary instructions.
Fixes#19163
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19182)
