It would be helpful to be able to generate RSA's dmp1/dmq1/iqmp values
when not provided in the param list to EVP_PKEY_fromdata. Augment the
provider in ossl_rsa_fromdata to preform this generation iff:
a) At least p q n e and e are provided
b) the new parameter OSSL_PARAM_RSA_DERIVE_PQ is set to 1
Fixes#21826
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21875)
Issue #23151 asks a question about the meaning of the PKCS12
documentation. This PR attempts to clarify how friendlyName and localKeyID
are added to the PKCS12 structure.
Fixes#23151
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Neil Horman <nhorman@openssl.org>
Reviewed-by: Tom Cosgrove <tom.cosgrove@arm.com>
(Merged from https://github.com/openssl/openssl/pull/23188)
Most of the callers do not actually check for
the special -1 return condition because they do not
pass NULL to it. It is also extremely improbable that
any code depends on this -1 return value in this condition
so it can be safely changed to 0 return.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Ben Kaduk <kaduk@mit.edu>
(Merged from https://github.com/openssl/openssl/pull/22930)
Fix a typo from asymmmetric to asymmetric
CLA: trivial
Reviewed-by: Paul Yang <kaishen.yy@antfin.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/23164)
Partial fix for #8026
Reviewed-by: Tom Cosgrove <tom.cosgrove@arm.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22656)
If a name is passed to EVP_<OBJ>_fetch of the form:
name1:name2:name3
The names are parsed on the separator ':' and added to the store, but
during the lookup in inner_evp_generic_fetch, the subsequent search of
the store uses the full name1:name2:name3 string, which fails lookup,
and causes subsequent assertion failures in evp_method_id.
instead catch the failure in inner_evp_generic_fetch and return an error
code if the name_id against a colon separated list of names fails. This
provides a graceful error return path without asserts, and leaves room
for a future feature in which such formatted names can be parsed and
searched for iteratively
Add a simple test to verify that providing a colon separated name
results in an error indicating an invalid lookup.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Todd Short <todd.short@me.com>
(Merged from https://github.com/openssl/openssl/pull/23110)
There is one remaining config setting for providers, soft_load, which is
enabled when provided in a config, regardless of its value. Augment it
to require a decisive value 1/0, yes/no, on/off, true/false, as we've
recently done for the activate setting.
Also, since it wasn't previously documented, add docs for it.
Fixes#23105
Reviewed-by: Tom Cosgrove <tom.cosgrove@arm.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/23111)
The hmac flags OSSL_MAC_PARAM_DIGEST_NOINIT and
OSSL_MAC_PARAM_DIGEST_ONESHOT dont add any real value to the provider,
and the former causes a segfault when the provider attempts to call
EVP_MAC_init on an EVP_MAC object that has been instructed not to be
initalized (as the update function will not have been set in the MAC
object, which is unilaterally called from EVP_MAC_init
Remove the tests for the above flags, and document them as being
deprecated and ignored.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Tom Cosgrove <tom.cosgrove@arm.com>
(Merged from https://github.com/openssl/openssl/pull/23054)
TLS record compression is off by default. Even if you switch it on, it
cannot be used at security level 2 which is the default in OpenSSL 3.2 and
above. Update the docs to point this out.
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Kurt Roeckx <kurt@roeckx.be>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/23104)
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/20727)
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/20727)
Currently, a provider is activated from our config file using the
activate parameter. However, the presence of the config parameter is
sufficient to trigger activation, leading to a counterintuitive
situation in which setting "activate = 0" still activates the provider
Make activation more intuitive by requiring that activate be set to one
of yes|true|1 to trigger activation. Any other value, as well as
omitting the parameter entirely, prevents activation (and also maintains
backward compatibility.
It seems a bit heavyweight to create a test specifically to validate the
plurality of these settings. Instead, modify the exiting openssl config
files in the test directory to use variants of these settings, and
augment the default.cnf file to include a provider section that is
explicitly disabled
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22906)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/21281)
Also add missing getter functionss OSSL_CMP_{CTX,HDR}_get0_geninfo_ITAVs() to CMP API.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/21281)
"=over 1" is too small. Use "=over 2" so that list items are
displayed correctly in the generated man-page.
You can check the man-page using the following command:
cd doc && pod2man man3/OSSL_PARAM_int.pod | man /dev/stdin
Reviewed-by: Neil Horman <nhorman@openssl.org>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/22974)
The EVP interface explicitly allows in-place encryption/decryption,
but this fact is just 'partially' documented in `EVP_EncryptUpdate(3)`
(pun intended): the manual page mentions only operation failure in
case of 'partial' overlaps. This is not even correct, because
the check for partially overlapping buffers is only implemented
in legacy code paths.
Currently, in-place encryption/decryption is only documented for
RSA (`RSA_public_encrypt(3)`) and DES (`DES_ecb_encrypt(3)`), as
well as in the provider interface (`provider-cipher(7)`).
This commit amends `EVP_EncryptUpdate(3)` and `provider-cipher(7)`
to make the front-end and back-end documentation consistent.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Tom Cosgrove <tom.cosgrove@arm.com>
(Merged from https://github.com/openssl/openssl/pull/22875)
Do not allow mid-expression line breaks.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22814)
"d_i in RFC8017" -> "d_i" in RFC8017
Reviewed-by: Todd Short <todd.short@me.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22868)
well know -> well known
CLA: trivial
Reviewed-by: Todd Short <todd.short@me.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22778)
The macro for "block-size" is OSSL_MAC_PARAM_BLOCK_SIZE, and this
parameter is not settable. Refer to the "customization string" rather
than the "custom value" (in the Blake2 spec, this is called the
personalization string).
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22763)
KECCAK-KMAC-128 and KECCAK-KMAC-256 are extendable output functions
that have been defined because they are convenient for implementing
KMAC. Give definitions for them so that users aren't left to figure
that out themselves. KECCAK-KMAC-128 is very similar to SHAKE-128,
and KECCAK-KMAC-256 is very similar to SHAKE-256.
Related to #22619.
Reviewed-by: Neil Horman <nhorman@openssl.org>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22755)
Make the documentation match reality. Add lots of missing algorithms.
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22694)
Add two new files
doc/images/openssl-square.svg
doc/images/openssl-square-nontransparent.png
and update the existing file
doc/images/openssl.svg
The "square" versions of the logo write "Open" and "SSL" on separate
lines, so that less horizontal space is used.
The png file (nontransparent, white background) can be used to update
the profile picture for the OpenSSL organization on GitHub.
For the existing logo, openssl.svg, the subtitle "Cryptography and
SSL/TLS Toolkit" has been dropped and the text-elements have been
converted to paths (so they are no longer dependent on what fonts the
renderer provides).
The svg files were provided by Anton A.
Part of https://github.com/openssl/project/issues/262
Reviewed-by: Anton Arapov <anton@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22626)
Because the quicserver utility supports expressly listening in ipv4/6
mode, its possible/likely that the server will listen on an ipv4
address, while the clients will connect via ipv6, leading to connection
failures.
Augment quic demo clients to afford them the same -6 option that the
server has so that connection family can be co-ordinated
Reviewed-by: Nicola Tuveri <nic.tuv@gmail.com>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22577)
Instead of just accepting a number of bytes, allows openssl rand to
accept a k|m|g suffix to scale to kbytes/mbytes/gbytes
Fixes#22622
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tom Cosgrove <tom.cosgrove@arm.com>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22624)
The upper limit of the output size is the default output size of
the respective algorithm variants.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/22659)
Fixes#7894
This allows SHAKE to squeeze multiple times with different output sizes.
The existing EVP_DigestFinalXOF() API has been left as a one shot
operation. A similar interface is used by another toolkit.
The low level SHA3_Squeeze() function needed to change slightly so
that it can handle multiple squeezes. This involves changing the
assembler code so that it passes a boolean to indicate whether
the Keccak function should be called on entry.
At the provider level, the squeeze is buffered, so that it only requests
a multiple of the blocksize when SHA3_Squeeze() is called. On the first
call the value is zero, on subsequent calls the value passed is 1.
This PR is derived from the excellent work done by @nmathewson in
https://github.com/openssl/openssl/pull/7921
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21511)
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22636)
As per recommendation by jfinkhaeuser, this documents the defaults for
KMAC-128 as 32 and for KMAC-256 as 64. The code already accomodates for
these values, so no changes are needed there.
Fixes#22381
CLA: trivial
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22614)
The demo code has changed to accept the hostname/port on the command line.
We update the tutorials to keep in sync with the demo code.
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22552)
Update makefile and fix some signedness issues in the demo sources.
Drop stray "\n" in the host-port format string that prevented ddd-01
from working (this was also noticed by Neil H). Also, determine the
length of the message we are sending and send that many bytes (rather
than send sizeof the buffer storing the message).
These changes are part of https://github.com/openssl/project/issues/253
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22542)
We move some of the "why QUIC" content into the guide and just provide a
summary in README-QUIC.md.
We also clarify how to use s_client with QUIC.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22505)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22459)
Test case amended from code initially written by Bernd Edlinger.
Fixes#21110
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22421)
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22446)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22487)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22487)
BLAKE2 is not really an extensible output function unlike SHAKE
as the digest size must be set during the context initialization.
Thus it makes no sense to use OSSL_DIGEST_PARAM_XOFLEN.
We also need to adjust EVP_DigestFinal_ex() to query the
OSSL_DIGEST_PARAM_SIZE as gettable ctx param for the size.
Fixes#22488
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22491)
The code for the quic demos (from the openssl guide) is presented as
modifications of tls-client-block.c. Make it so that the quic code
better matches the tls code (drop unneeded assignments to "ret", use
the same comment on SSL_connect(), add the same printf() statement).
Also fix some minor typos.
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22483)
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22485)
Earlier today, it took me five manuals! to find what on earth the
"Performance"/"EVP_MD_fetch(3)" crosslinks actually mean:
EVP_sha1(3)
crypto(7)
EVP_MD_fetch(3) (but not there! don't read that!)
OSSL_PROVIDER-default(7)
EVP_MD-SHA1(7)
If, instead, EVP_sha1(3) referenced EVP_MD-SHA1(7) at /all/,
which it should do, since it's supposed to be what you're replacing it
with, but it doesn't actually say that, maybe people would use it.
I know I didn't because it's basically just deadass buried
As found by git grep -l 'and should consider using'
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22420)
Creating JDK compatible pkcs12 files requires a bit more than just
adding the Trusted Key Usage OID to a certbag in the pkcs12 file.
Additionally the JDK currently requires that pkcs12 files setting this
oid _not_ contain any additional keys, and in response will produce
unpredictable results.
This could be solved by implying --nokeys when the pkcs12 utility is run
and the config option is set, but thatcould confuse users who didn't
specify nokeys on the command line. As such, remove the config file
setting for this feature, and replace it with a -jdktrust command line
option, that is documented to assert nokeys when a users specifies the
new command line option.
Fixes#22215
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22422)
Return SSL_SENT_SHUTDOWN and SSL_RECEIVED_SHUTDOWN with semantics
similar to TLS connections.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22408)
The `get_user_{entropy,nonce}` callbacks were add recently to the
dispatch table in commit 4cde7585ce. Instead of adding corresponding
`cleanup_user_{entropy,nonce}` callbacks, the `cleanup_{entropy,nonce}`
callbacks were reused. This can cause a problem in the case where the
seed source is replaced by a provider: the buffer gets allocated by
the provider but cleared by the core.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22423)
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22265)
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tom Cosgrove <tom.cosgrove@arm.com>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22262)
This design is to allow the use of explicitly fetched EVP_SIGNATURE
implementations.
Ref: openssl/project#171
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22129)
This design is to allow passing AlgorithmIdentifier parameter data to and
from any cryptograpfic operation, with convenience functions for them all,
not just for symmetric ciphers.
This is crucial to support CMS, among others.
Ref: openssl/project#172
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22162)
It is also not allowed by doc nits check to have
multiple includes.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
Reviewed-by: Tom Cosgrove <tom.cosgrove@arm.com>
(Merged from https://github.com/openssl/openssl/pull/22276)
In OpenSSL 3.x, the documentation for PKCS5_PBKDF2_HMAC incorrectly states
that an iter value less than 1 is treated as a single iteration. Upon further
investigation in providers/implementations/kdfs/pbkdf2.c, it appears that
invalid iter values will result in failure and raise the
PROV_R_INVALID_ITERATION_COUNT error. This commit corrects the documentation
to accurately reflect the behavior in OpenSSL 3.x.
Closes openssl#22168
Signed-off-by: Sumitra Sharma <sumitraartsy@gmail.com>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22252)
Rename `DSA_generate_prime[_ex]` to `DSA_generate_parameters[_ex]`,
fixing a copy&paste error from the `BN_generate_prime[_ex]` paragraph
in commit b3696a55a5.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22242)
Include the necessary header file openssl/pem.h in the
documentation to ensure that all functions related to
d2i_PKCS8PrivateKey are correctly defined.
Closes openssl#22188
Signed-off-by: Sumitra Sharma <sumitraartsy@gmail.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22253)
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
Reviewed-by: Tom Cosgrove <tom.cosgrove@arm.com>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22247)
The info callback is not prototyped correctly, and the code
example fails to compile because of const-incorrectness.
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22224)
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/22240)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22164)
We add a new flag QTEST_FLAG_CLIENT_TRACE to get debug tracing output if
required.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22157)
Use dashes instead of underscores, to be more consistent with
existing document names. And speaking of consistency, introduce
a consistent name transformation, which will scale better when
design documents start filling the folder ;-)
OSSL_PROVIDER_load_ex -> ossl-provider-load-ex.md
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22029)
Late review comments for pull request #21604, sort of.
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22029)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21979)
Add documentation for the function SSL_CONF_CTX_finish() in man3.
Fixes#22084
Signed-off-by: Sumitra Sharma <sumitraartsy@gmail.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22128)
Signed-off-by: Simo Sorce <simo@redhat.com>
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20131)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22098)
