strstr() is used to match multiple characters in the haystack,
whereas strchr() is used to matched only single character.
CLA: trivial
Reviewed-by: Tom Cosgrove <tom.cosgrove@arm.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/23347)
The failure would be caught later on, so this went unnoticed, until someone
tried with just one hex digit, which was simply ignored.
Fixes#23373
Reviewed-by: Tom Cosgrove <tom.cosgrove@arm.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/23374)
PKCS12 structures contain PKCS7 ContentInfo fields. These fields are
optional and can be NULL even if the "type" is a valid value. OpenSSL
was not properly accounting for this and a NULL dereference can occur
causing a crash.
CVE-2024-0727
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Neil Horman <nhorman@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/23361)
The EVP_CIPHER api currently assumes that calls made into several APIs
have already initalized the cipher in a given context via a call to
EVP_CipherInit[_ex[2]]. If that hasnt been done, instead of an error,
the result is typically a SIGSEGV.
Correct that by adding missing NULL checks in the apropriate apis prior
to using ctx->cipher
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22995)
CLA: trivial
Reviewed-by: Neil Horman <nhorman@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Tom Cosgrove <tom.cosgrove@arm.com>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/23345)
this could be triggered by the following code (assuming 64 bit time_t):
time_t t = 67768011791126057ULL;
ASN1_TIME* at = ASN1_TIME_set(NULL, t);
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22976)
ubsan on clang17 has started warning about the following undefined
behavior:
crypto/lhash/lhash.c:299:12: runtime error: call to function err_string_data_hash through pointer to incorrect function type 'unsigned long (*)(const void *)'
[...]/crypto/err/err.c:184: note: err_string_data_hash defined here
#0 0x7fa569e3a434 in getrn [...]/crypto/lhash/lhash.c:299:12
#1 0x7fa569e39a46 in OPENSSL_LH_insert [...]/crypto/lhash/lhash.c:119:10
#2 0x7fa569d866ee in err_load_strings [...]/crypto/err/err.c:280:15
[...]
The issue occurs because, the generic hash functions (OPENSSL_LH_*) will
occasionaly call back to the type specific registered functions for hash
generation/comparison/free/etc, using functions of the (example)
prototype:
[return value] <hash|cmp|free> (void *, [void *], ...)
While the functions implementing hash|cmp|free|etc are defined as
[return value] <fnname> (TYPE *, [TYPE *], ...)
The compiler, not knowing the type signature of the function pointed to
by the implementation, performs no type conversion on the function
arguments
While the C language specification allows for pointers to data of one
type to be converted to pointers of another type, it does not
allow for pointers to functions with one signature to be called
while pointing to functions of another signature. Compilers often allow
this behavior, but strictly speaking it results in undefined behavior
As such, ubsan warns us about this issue
This is an potential fix for the issue, implemented using, in effect,
thunking macros. For each hash type, an additional set of wrapper
funtions is created (currently for compare and hash, but more will be
added for free/doall/etc). The corresponding thunking macros for each
type cases the actuall corresponding callback to a function pointer of
the proper type, and then calls that with the parameters appropriately
cast, avoiding the ubsan warning
This approach is adventageous as it maintains a level of type safety,
but comes at the cost of having to implement several additional
functions per hash table type.
Related to #22896
Reviewed-by: Sasa Nedvedicky <sashan@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/23192)
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/19948)
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/19948)
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/19948)
The regression was introduced in PR #22817.
In that pull request, the input length check was moved forward,
but the related ori instruction was missing, and it will cause
input of any length down to the much slower scalar implementation.
Fixes#23300
CLA: trivial
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/23301)
GNU/Hurd does not have IP_PKTINFO yet, thus SUPPORT_LOCAL_ADDR is undef,
data->local_addr_enabled never set to 1, and thus the M_METHOD_RECVMSG
method would end up raising BIO_R_LOCAL_ADDR_NOT_AVAILABLE immediately.
Fixes#22872
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/23293)
During creation of the EVP_PKEY_CTX we were trying to discover what legacy
alg it corresponds to every time which was slow. Instead we move this into
the construction of the EVP_KEYMGMT.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/23265)
X509_STORE_get0_objects returns a pointer to the X509_STORE's storage,
but this function is a bit deceptive. It is practically unusable in a
multi-threaded program. See, for example, RUSTSEC-2023-0072, a security
vulnerability caused by this OpenSSL API.
One might think that, if no other threads are mutating the X509_STORE,
it is safe to read the resulting list. However, the documention does not
mention that other logically-const operations on the X509_STORE, notably
certifcate verifications when a hash_dir is installed, will, under a
lock, write to the X509_STORE. The X509_STORE also internally re-sorts
the list on the first query.
If the caller knows to call X509_STORE_lock and X509_STORE_unlock, it
can work around this. But this is not obvious, and the documentation
does not discuss how X509_STORE_lock is very rarely safe to use. E.g.
one cannot call any APIs like X509_STORE_add_cert or
X509_STORE_CTX_get1_issuer while holding the lock because those
functions internally expect to take the lock. (X509_STORE_lock is
another such API which is not safe to export as public API.)
Rather than leave all this to the caller to figure out, the API should
have returned a shallow copy of the list, refcounting the values. Then
it could be internally locked and the caller can freely inspect the
result without synchronization with the X509_STORE.
Reviewed-by: Neil Horman <nhorman@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/23224)
Since new_line is assigned with 0 in the very begging of the function check added at line no. 106 will never become true. Hence removing.
CLA: trivial
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Neil Horman <nhorman@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/23284)
Fixes CVE-2023-6237
If a large and incorrect RSA public key is checked with
EVP_PKEY_public_check() the computation could take very long time
due to no limit being applied to the RSA public key size and
unnecessarily high number of Miller-Rabin algorithm rounds
used for non-primality check of the modulus.
Now the keys larger than 16384 bits (OPENSSL_RSA_MAX_MODULUS_BITS)
will fail the check with RSA_R_MODULUS_TOO_LARGE error reason.
Also the number of Miller-Rabin rounds was set to 5.
Reviewed-by: Neil Horman <nhorman@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/23243)
If the value of a->length is large (>= 2^12), then an integer overflow will
occur for the signed type, which according to the C standard is UB.
CLA: trivial
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/23274)
Current PowerPC-related defines omit Darwin ppc64 case.
Use __POWERPC__ in place of __ppc__ + __ppc64__
Fixes#23220
CLA: trivial
Reviewed-by: Tom Cosgrove <tom.cosgrove@arm.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/23245)
CLA: trivial
Reviewed-by: Tom Cosgrove <tom.cosgrove@arm.com>
Reviewed-by: Kurt Roeckx <kurt@roeckx.be>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/23253)
When parsing the stable section of a config such as this:
openssl_conf = openssl_init
[openssl_init]
stbl_section = mstbl
[mstbl]
id-tc26 = min
Can lead to a SIGSEGV, as the parsing code doesnt recognize min as a
proper section name without a trailing colon to associate it with a
value. As a result the stack of configuration values has an entry with
a null value in it, which leads to the SIGSEGV in do_tcreate when we
attempt to pass NULL to strtoul.
Fix it by skipping any entry in the config name/value list that has a
null value, prior to passing it to stroul
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22988)
Use the number of processed bytes information (num) from the generic
cipher context for the partial block handling in cfb and ofb also in
s390x-legacy code. For more details see 4df92c1a14 ("Fix partial block
encryption in cfb and ofb for s390x").
Signed-off-by: Holger Dengler <dengler@linux.ibm.com>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/23201)
Fixes#22818
Reviewed-by: Neil Horman <nhorman@openssl.org>
Reviewed-by: Todd Short <todd.short@me.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22860)
Even in the good case there was memory leak here.
Add a simple test case to have at least some test coverage.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/23234)
When a subsequent call to SXNET_add_id_asc fails
e.g. because user is a string larger than 64 char
or the zone is a duplicate zone id,
or the zone is not an integer,
a memory leak may be the result.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/23234)
The AES-CTR assembly code uses v8-v15 registers, they are
callee-saved registers, they must be preserved before the
use and restored after the use.
Change-Id: If9192d1f0f3cea7295f4b0d72ace88e6e8067493
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/23233)
The base type OSSL_PARAM getters will NULL deref if they are initalized
as null. Add NULL checks for those parameters that have no expectation
of returning null (int32/64/uint32/64/BN). Other types can be left as
allowing NULL, as a NULL setting may be meaningful (string, utf8str,
octet string, etc).
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/23083)
Fixes CVE-2023-6129
The POLY1305 MAC (message authentication code) implementation in OpenSSL for
PowerPC CPUs saves the the contents of vector registers in different order
than they are restored. Thus the contents of some of these vector registers
is corrupted when returning to the caller. The vulnerable code is used only
on newer PowerPC processors supporting the PowerISA 2.07 instructions.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/23200)
It would be helpful to be able to generate RSA's dmp1/dmq1/iqmp values
when not provided in the param list to EVP_PKEY_fromdata. Augment the
provider in ossl_rsa_fromdata to preform this generation iff:
a) At least p q n e and e are provided
b) the new parameter OSSL_PARAM_RSA_DERIVE_PQ is set to 1
Fixes#21826
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21875)
There are several points during x509 extension creation which rely on
configuration options which may have been incorrectly parsed due to
invalid settings. Preform a value check for null in those locations to
avoid various crashes/undefined behaviors
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/23183)
Most of the callers do not actually check for
the special -1 return condition because they do not
pass NULL to it. It is also extremely improbable that
any code depends on this -1 return value in this condition
so it can be safely changed to 0 return.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Ben Kaduk <kaduk@mit.edu>
(Merged from https://github.com/openssl/openssl/pull/22930)
Partial fix for #8026
Reviewed-by: Tom Cosgrove <tom.cosgrove@arm.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22656)
If a name is passed to EVP_<OBJ>_fetch of the form:
name1:name2:name3
The names are parsed on the separator ':' and added to the store, but
during the lookup in inner_evp_generic_fetch, the subsequent search of
the store uses the full name1:name2:name3 string, which fails lookup,
and causes subsequent assertion failures in evp_method_id.
instead catch the failure in inner_evp_generic_fetch and return an error
code if the name_id against a colon separated list of names fails. This
provides a graceful error return path without asserts, and leaves room
for a future feature in which such formatted names can be parsed and
searched for iteratively
Add a simple test to verify that providing a colon separated name
results in an error indicating an invalid lookup.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Todd Short <todd.short@me.com>
(Merged from https://github.com/openssl/openssl/pull/23110)
Make EVP_PKEY_CTX_set_rsa_oaep_md() and
EVP_PKEY_CTX_get_rsa_oaep_md_name() only work for RSA keys.
Since these calls use "digest" as a OSSL_PARAM, they should not
work for other key types.
Reviewed-by: Tom Cosgrove <tom.cosgrove@arm.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20319)
If a call to EVP_PKEY_CTX_set_rsa_mgf1_md() fails then the caller
needs to free the label.
Reviewed-by: Tom Cosgrove <tom.cosgrove@arm.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20319)
Sometimes the error handling returns an ASN1_STRING
object in *out although that was not passed in by the
caller, and sometimes the error handling deletes the
ASN1_STRING but forgets to clear the *out parameter.
Therefore the caller has no chance to know, if the leaked
object in *out shall be deleted or not.
This may cause a use-after-free error e.g. in asn1_str2type:
==63312==ERROR: AddressSanitizer: heap-use-after-free on address 0x603000073280 at pc 0x7f2652e93b08 bp 0x7ffe0e1951c0 sp 0x7ffe0e1951b0
READ of size 8 at 0x603000073280 thread T0
#0 0x7f2652e93b07 in asn1_string_embed_free crypto/asn1/asn1_lib.c:354
#1 0x7f2652eb521a in asn1_primitive_free crypto/asn1/tasn_fre.c:204
#2 0x7f2652eb50a9 in asn1_primitive_free crypto/asn1/tasn_fre.c:199
#3 0x7f2652eb5b67 in ASN1_item_free crypto/asn1/tasn_fre.c:20
#4 0x7f2652e8e13b in asn1_str2type crypto/asn1/asn1_gen.c:740
#5 0x7f2652e8e13b in generate_v3 crypto/asn1/asn1_gen.c:137
#6 0x7f2652e9166c in ASN1_generate_v3 crypto/asn1/asn1_gen.c:92
#7 0x7f2653307b9b in do_othername crypto/x509v3/v3_alt.c:577
#8 0x7f2653307b9b in a2i_GENERAL_NAME crypto/x509v3/v3_alt.c:492
#9 0x7f26533087c2 in v2i_subject_alt crypto/x509v3/v3_alt.c:327
#10 0x7f26533107fc in do_ext_nconf crypto/x509v3/v3_conf.c:100
#11 0x7f2653310f33 in X509V3_EXT_nconf crypto/x509v3/v3_conf.c:45
#12 0x7f2653311426 in X509V3_EXT_add_nconf_sk crypto/x509v3/v3_conf.c:312
#13 0x7f265331170c in X509V3_EXT_REQ_add_nconf crypto/x509v3/v3_conf.c:360
#14 0x564ed19d5f25 in req_main apps/req.c:806
#15 0x564ed19b8de0 in do_cmd apps/openssl.c:564
#16 0x564ed1985165 in main apps/openssl.c:183
#17 0x7f2651c4a082 in __libc_start_main ../csu/libc-start.c:308
#18 0x564ed1985acd in _start (/home/ed/OPCToolboxV5/Source/Core/OpenSSL/openssl/apps/openssl+0x139acd)
0x603000073280 is located 16 bytes inside of 24-byte region [0x603000073270,0x603000073288)
freed by thread T0 here:
#0 0x7f265413440f in __interceptor_free ../../../../src/libsanitizer/asan/asan_malloc_linux.cc:122
#1 0x7f265315a429 in CRYPTO_free crypto/mem.c:311
#2 0x7f265315a429 in CRYPTO_free crypto/mem.c:300
#3 0x7f2652e757b9 in ASN1_mbstring_ncopy crypto/asn1/a_mbstr.c:191
#4 0x7f2652e75ec5 in ASN1_mbstring_copy crypto/asn1/a_mbstr.c:38
#5 0x7f2652e8e227 in asn1_str2type crypto/asn1/asn1_gen.c:681
#6 0x7f2652e8e227 in generate_v3 crypto/asn1/asn1_gen.c:137
#7 0x7f2652e9166c in ASN1_generate_v3 crypto/asn1/asn1_gen.c:92
#8 0x7f2653307b9b in do_othername crypto/x509v3/v3_alt.c:577
#9 0x7f2653307b9b in a2i_GENERAL_NAME crypto/x509v3/v3_alt.c:492
#10 0x7f26533087c2 in v2i_subject_alt crypto/x509v3/v3_alt.c:327
#11 0x7f26533107fc in do_ext_nconf crypto/x509v3/v3_conf.c:100
#12 0x7f2653310f33 in X509V3_EXT_nconf crypto/x509v3/v3_conf.c:45
#13 0x7f2653311426 in X509V3_EXT_add_nconf_sk crypto/x509v3/v3_conf.c:312
#14 0x7f265331170c in X509V3_EXT_REQ_add_nconf crypto/x509v3/v3_conf.c:360
#15 0x564ed19d5f25 in req_main apps/req.c:806
#16 0x564ed19b8de0 in do_cmd apps/openssl.c:564
#17 0x564ed1985165 in main apps/openssl.c:183
#18 0x7f2651c4a082 in __libc_start_main ../csu/libc-start.c:308
previously allocated by thread T0 here:
#0 0x7f2654134808 in __interceptor_malloc ../../../../src/libsanitizer/asan/asan_malloc_linux.cc:144
#1 0x7f265315a4fd in CRYPTO_malloc crypto/mem.c:221
#2 0x7f265315a4fd in CRYPTO_malloc crypto/mem.c:198
#3 0x7f265315a945 in CRYPTO_zalloc crypto/mem.c:236
#4 0x7f2652e939a4 in ASN1_STRING_type_new crypto/asn1/asn1_lib.c:341
#5 0x7f2652e74e51 in ASN1_mbstring_ncopy crypto/asn1/a_mbstr.c:150
#6 0x7f2652e75ec5 in ASN1_mbstring_copy crypto/asn1/a_mbstr.c:38
#7 0x7f2652e8e227 in asn1_str2type crypto/asn1/asn1_gen.c:681
#8 0x7f2652e8e227 in generate_v3 crypto/asn1/asn1_gen.c:137
#9 0x7f2652e9166c in ASN1_generate_v3 crypto/asn1/asn1_gen.c:92
#10 0x7f2653307b9b in do_othername crypto/x509v3/v3_alt.c:577
#11 0x7f2653307b9b in a2i_GENERAL_NAME crypto/x509v3/v3_alt.c:492
#12 0x7f26533087c2 in v2i_subject_alt crypto/x509v3/v3_alt.c:327
#13 0x7f26533107fc in do_ext_nconf crypto/x509v3/v3_conf.c:100
#14 0x7f2653310f33 in X509V3_EXT_nconf crypto/x509v3/v3_conf.c:45
#15 0x7f2653311426 in X509V3_EXT_add_nconf_sk crypto/x509v3/v3_conf.c:312
#16 0x7f265331170c in X509V3_EXT_REQ_add_nconf crypto/x509v3/v3_conf.c:360
#17 0x564ed19d5f25 in req_main apps/req.c:806
#18 0x564ed19b8de0 in do_cmd apps/openssl.c:564
#19 0x564ed1985165 in main apps/openssl.c:183
#20 0x7f2651c4a082 in __libc_start_main ../csu/libc-start.c:308
Reviewed-by: Paul Yang <kaishen.yy@antfin.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/23138)
The INT_MAX checks in param_build.c do not appear to be needed. Drop
them. This was noted during the discussion for PR #22967. This makes
param_build.c more consistent with params.c.
Reviewed-by: Neil Horman <nhorman@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/23143)
There is one remaining config setting for providers, soft_load, which is
enabled when provided in a config, regardless of its value. Augment it
to require a decisive value 1/0, yes/no, on/off, true/false, as we've
recently done for the activate setting.
Also, since it wasn't previously documented, add docs for it.
Fixes#23105
Reviewed-by: Tom Cosgrove <tom.cosgrove@arm.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/23111)
CLA: trivial
Avoid doing the division via modulo where possible.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/23097)
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/20727)
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/20727)
