The current code has issues when sizeof(long) <> sizeof(size_t). The two
types are assumed to be interchangeable and them being different will
cause crashes and endless loops.
This fix limits the maximum chunk size for many of the symmetric ciphers
to 2^30 bytes. This chunk size limits the amount of data that will
be encrypted/decrypted in one lump. The code internally handles block
of data later than the chunk limit, so this will present no difference
to the caller. Any loss of efficiency due to limiting the chunking to
1Gbyte rather than more should be insignificant.
Fixes Coverity issues:
1508498, 1508500 - 1508505, 1508507 - 1508527, 1508529 - 1508533,
1508535 - 1508537, 1508539, 1508541 - 1508549, 1508551 - 1508569 &
1508571 - 1508582.
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18997)
Coverity 1508506:
Fixes a bug in the cookie code which would have caused problems for
ten minutes before and after the lower 32 bits of time_t rolled over.
Coverity 1508534 & 1508540:
Avoid problems when the lower 32 bits of time_t roll over by delaying
the cast to integer until after the time delta has been computed.
Reviewed-by: Ben Kaduk <kaduk@mit.edu>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19004)
The current libssl code always ensures that the callbacks are non-null.
However, the record layer itself wasn't checkthing this. We ensure it does.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18132)
Some minor formatting cleanups and other minor tweaks.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18132)
Some macros were redefined in ssl3_cbc.c. We remove the redefinitions
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18132)
The SSL_AD_NO_ALERT value was defined in two places. We centralise its
definition.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18132)
Once we free the rrl object we should NULL it to prevent a dangling ref
to it. Otherwise we could get a double free.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18132)
Some functions in the record layer were called rlayer_*, but most were
called tls_*. We standardise on the latter.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18132)
The 1 in DTLS1 is confusing and is removed. We also tweak the structure
to always be able to track 64 packets regardless of whether we are on a
32 bit or 64 bit system.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18132)
This file contains design details for the old record layer and is no
longer relevant for the new design.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18132)
The value for epoch was being represented internally via various types:
uint16_t, unsigned short, unsigned int, unsigned long
We standardise on uint16_t
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18132)
The read field is no longer used and can be safely removed.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18132)
We would like the capability for the options/mode/read_ahead settings
to be updateable after the record layer object has been instantiated.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18132)
The tls13encryption is an internal test that reaches inside libssl
to test encryption/decryption of records. It needs to be amended for the
new code structure so that it is testing the equivalent things as before.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18132)
This allows querying of the record layer to get a human readable state
string out. This resolves two outstanding TODO comments and enables us
to remove the rstate variable from s->rlayer.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18132)
This resolves an outstanding "TODO" item.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18132)
If read_ahead data is left over when a record layer closes down, there is
already code present to push into the "next" BIO. So the TODO removed here
is no longer relevant.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18132)
Fields such as rrlmethod and rrl are entirely related to the record layer,
and so should be in that object.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18132)
Now everything has been moved to the record layer the additional check
for setting up the read buffer is not needed and can be removed.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18132)
Now that the read record layer has moved to the new architecture we can
clear some of the old stuff away.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18132)
This also fixes ssl3_pending while we are at it
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18132)
We remove some code outside of the record layer which is no longer
relevant since its functions are now performed by the new record layer
code. This removes a TODO(RECLAYER) as a result.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18132)
Some TODO(RECLAYER) comments are no longer necessary and can be removed.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18132)
We had some temporary function pointers in OSSL_RECORD_METHOD which were
only necessary during the process of refactoring the read record layer.
These are no longer required so can be removed.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18132)
Remove references to dtls1_* and just use dtls_*
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18132)
We add unprocessed DTLS records to the unprocessed record queue. When
the record layer closes down we write the unprocessed records to the
next record layer object.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18132)
Similarly with read_hash and write_hash. In the new model we have a
separate record layer object for reading and writing. Therefore we don't
need to distinguish between reading and writing inside the record layer
object in the encryption and md ctxs.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18132)
Don't use the message callback from the SSL object. Instead we use a
wrapper callback so that the record layer does not need to be aware of the
SSL object.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18132)
This removes some references to the SSL object from the record layer.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18132)
Pass the max fragment length to the record layer when it is applicable
to avoid the need to go through the SSL object.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18132)
We remove the dependency on the SSL object. Instead we check if the
record layer has already set an alert code.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18132)
We no longer have to go through the SSL object to discover whether EtM has
been negotiated.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18132)
Instead we introduce RLAYER_USE_EXPLICIT_IV(). This removes a dependency
on the SSL object.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18132)
Remove SSL_IS_TLS13() and hello_retry_request
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18132)
Also update the oqsprovider.sh file to not run the preptests.sh script
which is no longer required
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18132)
When validate_record_header() gets called it should be able to rely on
the fact that an SSLv2 record version means that the record was received in
SSLv2 format.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18132)
