The DH private key length, which is an optional parameter, wasn't
properly imported / exported between legacy and provider side
implementations.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/13166)
This change makes the naming more consistent, because three different terms
were used for the same thing. (The term libctx was used by far most often.)
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/12621)
Many of the new types introduced by OpenSSL 3.0 have an OSSL_ prefix,
e.g., OSSL_CALLBACK, OSSL_PARAM, OSSL_ALGORITHM, OSSL_SERIALIZER.
The OPENSSL_CTX type stands out a little by using a different prefix.
For consistency reasons, this type is renamed to OSSL_LIB_CTX.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/12621)
This streamlines with all other config targets, and draws from the
'sys_id' config attribute.
Fixes#12858
Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/12933)
HPE NonStop Port Changes for 3.0.0 Includes unthreaded, PUT, and SPT for OSS.
The port changes include wrapping where necessary for FLOSS and
appropriate configuration changes to support that. Two tests
are excluded as being inappropriate for the platform.
The changes are:
* Added /usr/local/include to nonstop-nsx_spt_floss to load floss.h
* Added SPT Floss variant for NonStop
* Wrapped FLOSS definitions in OPENSSL_TANDEM_FLOSS to allow selective enablement.
* SPT build configuration for NonStop
* Skip tests not relevant for NonStop
* PUT configuration changes required for NonStop platforms
* Configurations/50-nonstop.conf: updates for TNS/X platform.
* FLOSS instrumentation for HPE NonStop TNS/X and TNS/E platforms.
* Configurations/50-nonstop.conf: modifications for non-PUT TNS/E platform b
* Fix use of DELAY in ssltestlib.c for HPNS.
* Fixed commit merge issues and added floss to http_server.c
CLA: Permission is granted by the author to the OpenSSL team to use these modifications.
Fixes#5087.
Signed-off-by: Randall S. Becker <rsbecker@nexbridge.com>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/12800)
Instead of passing the length in from the caller, compute the length
to pass to setsockopt() inside of ktls_start(). This isolates the
OS-specific behavior to ktls.h and removes it from the socket BIO
implementations.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Ben Kaduk <kaduk@mit.edu>
(Merged from https://github.com/openssl/openssl/pull/12782)
The KTLS functions are always used under #ifndef OPENSSL_NO_KTLS, so
the dummy functions were never used.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Ben Kaduk <kaduk@mit.edu>
(Merged from https://github.com/openssl/openssl/pull/12782)
From this point on, this engine must be specifically specified.
To replace the internal EMBEDDED hack with something unique for the
new module, functions to create application specific OSSL_STORE_INFO
types were added.
Furthermore, the following function had to be exported:
ossl_do_blob_header()
ossl_do_PVK_header()
asn1_d2i_read_bio()
Finally, evp_pkcs82pkey_int() has become public under a new name,
EVP_PKCS82PKEY_with_libctx()
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/12587)
These functions are a bit large to inline and are not usable outside
of libssl.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/12111)
Similar to KTLS receive for Linux, KTLS receive for FreeBSD is enabled
by passing a session key to the kernel via a new socket option. Once
KTLS receive is enabled on a socket, the socket returns records via
recvmsg(). A control message attached to each record supplies the
original TLS header, and the decrypted plaintext is returned in the
data buffer passed to recvmsg().
To support the case that the userland buffer may already contain
pending encrypted records (which is already handled by Linux's KTLS
receive), the socket option structure for FreeBSD has been extended to
include the initial sequence number.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/12111)
These are similar to the helpers added in 95badfeb60. I've adjusted
the arguments passed to ktls_check_supported_cipher and
ktls_configure_crypto so that FreeBSD and Linux can both use the same
signature to avoid OS-specific #ifdef's in libssl. This also required
moving the check on valid TLS versions into
ktls_check_supported_cipher for Linux. This has largely removed
OS-specific code and OS-specific #ifdef's for KTLS outside of
<internal/ktls.h>.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/12111)
This type is defined to hold the OS-specific structure passed to
BIO_set_ktls.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/12111)
This includes fixing a bug that could only be discovered when no
loaders were registered.
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/12512)
The pass phrase prompter that's part of OSSL_ENCODER and OSSL_DECODER
is really a passphrase callback bridge between the diverse forms of
prompters that exist within OpenSSL: pem_password_cb, ui_method and
OSSL_PASSPHRASE_CALLBACK.
This can be generalised, to be re-used by other parts of OpenSSL, and
to thereby allow the users to specify whatever form of pass phrase
callback they need, while being able to pass that on to other APIs
that are called internally, in the form that those APIs demand.
Additionally, we throw in the possibility to cache pass phrases during
a "session" (we leave it to each API to define what a "session" is).
This is useful for any API that implements discovery and therefore may
need to get the same password more than once, such as OSSL_DECODER and
OSSL_STORE.
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/12512)
Fixes#12589
The 'type' parameter needed to be propagated to the ffc params during keygen,
so that the simple validation of params done during keygen can handle legacy keys for the default provider.
The fips provider ignores this change and only allows fips186-4 approved sizes.
Reviewed-by: Nicola Tuveri <nic.tuv@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/12623)
A config file can change the global default properties. Therefore we
must ensure that the config file is loaded before reading or amending
them.
Fixes#12565
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/12567)
If an attempt is made to load a provider and it fails, the fall-back mechanism
should be disabled to prevent the user getting some weird happening. E.g. a
failure to load the FIPS provider should not allow the default to load as a
fall-back.
The OSSL_PROVIDER_try_load() call has been added, to allow a provider to be
loaded without disabling the fall-back mechanism if it fails.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/12625)
It is superseded by EVP_CIPHER_CTX_get_iv(), is only present on master,
and had only a couple of in-tree callers that are easy to convert.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/12233)
The default and legacy providers currently return 1 for status and self test checks.
Added test to show the 3 different stages the self test can be run (for installation, loading and on demand).
For the fips provider:
- If the on demand self test fails, then any subsequent fetches should also fail. To implement this the
cached algorithms are flushed on failure.
- getting the self test callback in the fips provider is a bit complicated since the callback hangs off the core
libctx (as it is set by the application) not the actual fips library context. Also the callback can be set at
any time not just during the OSSL_provider_init() so it is calculated each time before doing any self test.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/11752)
Fly-by fix is to move crypto/include/internal/pem_int.h to
include/internal/pem.h.
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/12574)
Added der_writer functions for writing octet string primitives.
Generate OID's for key wrapping algorithms used by X942 KDF.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/12554)
This adds a method OSSL_DESERIALIZER, a deserializer context and basic
support to use a set of serializers to get a desired type of data, as
well as deserializer chains.
The idea is that the caller can call OSSL_DESERIALIZER_CTX_add_serializer()
to set up the set of desired results, and to add possible chains, call
OSSL_DESERIALIZER_CTX_add_extra(). All these deserializers are pushed
on an internal stack.
The actual deserialization is then performed using functions like
OSSL_DESERIALIZER_from_bio(). When performing deserialization, the
inernal stack is walked backwards, keeping track of the deserialized
data and its type along the way, until the data kan be processed into
the desired type of data.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/12410)
This moves test/ossl_test_endian.h to include/internal/endian.h and
thereby makes the macros in there our standard way to check endianness
in run-time.
Reviewed-by: Kurt Roeckx <kurt@roeckx.be>
(Merged from https://github.com/openssl/openssl/pull/12390)
Fixes#11864
- The dsa keygen assumed valid p, q, g values were being passed. If this is not correct then it is
possible that dsa keygen can either hang or segfault.
The fix was to do a partial validation of p, q, and g inside the keygen.
- Fixed a potential double free in the dsa keypair test in the case when in failed (It should never fail!).
It freed internal object members without setting them to NULL.
- Changed the FFC key validation to accept 1024 bit keys in non fips mode.
- Added tests that use both the default provider & fips provider to test these cases.
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/12176)
Fixes a problem where global properties don't work with a NULL query.
Specifying an algorithm with a NULL query ignores the default properties.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/12123)
Provide a function to applications to query the capabilities that a
provider can perform.
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/11914)
For FIPS validation purposes - Automated Cryptographic Validation Protocol (ACVP) tests need to be
performed. (See https://github.com/usnistgov/ACVP). These tests are very similiar to the old CAVS tests.
This PR uses a hardwired subset of these test vectors to perform similiar operations,
to show the usage and prove that the API's are able to perform the required operations.
It may also help with communication with the lab (i.e- The lab could add a test here to show
a unworking use case - which we can then address).
The EVP layer performs these tests instead of calling lower level API's
as was done in the old FOM.
Some of these tests require access to internals that are not normally allowed/required.
The config option 'acvp_tests' (enabled by default) has been added so that this
access may be removed.
The mechanism has been implemented as additional OSSL_PARAM values that can be set and get.
A callback mechanism did not seem to add any additional benefit.
These params will not be added to the gettables lists.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/11572)
Implement a function which enables us to get hold of the provider ctx
for a loaded provider.
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/11834)
Fixes#11743
The ouput format had 2 issues that caused it not to match the expected documented format:
(1) At some point the thread id printing was changed to use the OPENSSL_hex2str method which puts ':' between hex bytes.
An internal function that skips the seperator has been added.
(2) The error code no longer exists. So this was completely removed from the string. It is now replaced by ::
As an example:
00:77:6E:52:14:7F:00:00:error:asn1 encoding routines:asn1_check_tlen:wrong tag:crypto/asn1/tasn_dec.c:1135:
Is now:
00776E52147F0000:error::asn1 encoding routines:asn1_check_tlen:wrong tag:crypto/asn1/tasn_dec.c:1135:
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/11789)
When a desired algorithm wasn't available, we didn't register anywhere
that an attempt had been made, with the result that next time the same
attempt was made, the whole process would be done again.
To avoid this churn, we register a bit for each operation that has
been queried in the libcrypto provider object, and test it before
trying the same query and method construction loop again.
If course, if the provider has told us not to cache, we don't register
this bit.
Fixes#11814
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/11842)
A provider could be linked against a different version of libcrypto than
the version of libcrypto that loaded the provider. Different versions of
libcrypto could define opaque types differently. It must never occur that
a type created in one libcrypto is used directly by the other libcrypto.
This will cause crashes.
We can "cheat" for "built-in" providers that are part of libcrypto itself,
because we know that the two libcrypto versions are the same - but not for
other providers.
To ensure this does not occur we use different types names for the handful
of opaque types that are passed between the core and providers.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/11758)
Add X509_VERIFY_PARAM_get0_host(), X509_VERIFY_PARAM_get0_email(),
and X509_VERIFY_PARAM_get1_ip_asc() to support this,
as well as the internal helper function ipaddr_to_asc(), which
is used also for simplifying other IP address output functions.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/11693)
