If we have an unsupported key type we may get a decode error and
therefore we should detect that.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15504)
Two CMP tests were using the fips.cnf config file. However to
ensure that decoders are available the fips-and-base.cnf config
file needs to be used instead.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15504)
Now that we actually load public keys from providers we need to mark some
key paris in the evp tests as only available there. Otherwise we get test
failures when only the FIPS Provider is loaded.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15504)
The X509 test was looking for some specific errors when printing an SM2
X509 certificate when SM2 is disabled. In fact these errors appear in the
middle of the certificate printing which is quite odd. There is also a
separate error "Unable to load Public Key" which is more cleanly printed.
With the recent change to using provided keys in certs the old errors are
no longer output. However printing them in the middle of the cert is
probably not right anyway. So we just rely on the "Unable to load Public
Key" message.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15504)
Now that we are using provided keys when loading a certificate the pretty
printing formatting is cosmetically different. We need to adjust expected
test output accordingly.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15504)
Allocate at least one byte to distinguish a zero length key
from an unset key.
Fixes#15632
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15643)
Fixes#15531
DES and TDES set this flag which could possibly be used by applications.
The gettable cipher param OSSL_CIPHER_PARAM_HAS_RAND_KEY has been added.
Note that EVP_CIPHER_CTX_rand_key() uses this flag.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15606)
Various EVP_CipherInit sequences including partial inits and initializations
with different "enc" flags caused problems on s390x. Similarly, cipher
reinitialization and especially GCM reinitialization with different tag length
led to wrong results. Add some unit tests to cover these rather exotic use
cases.
Signed-off-by: Juergen Christ <jchrist@linux.ibm.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15521)
Fix the generate_ssl_tests.pl script so that it can be run standalone from
the command line according to the instructions in test/README.ssltest.md
Fixes#11430
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15617)
Even if $server_port isn't touched, it's still a number coming from
configuration. It's therefore not trustable as an indicator that the
ACCEPT line delivered a port number or an error indication.
$accept_msg is used instead to capture the port if there is one, and
be a better indicator of error.
Fixes#15557Fixes#15571
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/15580)
test_cmp_http() made some assumptions about what values that exit_checker
could get that aren't quite right.
Furthermore, the expected result isn't about exit codes, but about
true or false. This is better served by getting the value from
OpenSSL::Test::run(), and checking that value against $expected_result
with Test::More::is().
Fixes#15557Fixes#15571
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/15580)
When we create via d2i or dup an X509_REQ we should ensure that the libctx
is properly propagated. We also ensure we create X509_REQ objects with the
proper libctx assigned in the CMP tests.
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15591)
Make sure we pass the libctx/propq around everywhere that we need it to
ensure we get provider keys when needed.
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15591)
We add a verify test with a cert with a SAN and a bad SmtpUTF8Mailbox
entry, with an intermediate certificate with email name constraints.
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15611)
Remove negative test cases which simulate an attempt to write file contents to a directory
using a path ending in '/' as this is not compatible with fopen on all platforms, e.g., AIX.
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/15575)
To be reverted once key generation checks are added everywhere and a way to
disable them implemented.
Fixes#15502
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15560)
Fixes#15552
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15566)
And a few additional fixups to make the no-deprecated configuration
to build.
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15466)
For functions that exist in 1.1.1 provide a simple aliases via #define.
Fixes#15236
Functions with OSSL_DECODER_, OSSL_ENCODER_, OSSL_STORE_LOADER_,
EVP_KEYEXCH_, EVP_KEM_, EVP_ASYM_CIPHER_, EVP_SIGNATURE_,
EVP_KEYMGMT_, EVP_RAND_, EVP_MAC_, EVP_KDF_, EVP_PKEY_,
EVP_MD_, and EVP_CIPHER_ prefixes are renamed.
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15405)
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14587)
The code to handle the cipher operation was already in the provider.
It just needed a OSSL_PARAM in order to set this into the algorithm.
EVP_CIPHER_CTX_set_flags() has been modified to pass the OSSL_PARAM.
Issue reported by Mark Powers from Acumen.
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15496)
Revert a change in behavior to BIO_write(). If a NULL BIO
is passed, no error is raised and the return value is 0. There are
many places where the return code from the write was not checked,
resulting in an error stack with no error status being returned.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15493)
Fixes#15515
Another case of the order that tests run in causes a failure.
A new test was loading "legacy" into the default lib ctx. If it
ran first then everything fails. The test now has its own lib ctx.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15516)
Fixes#15392
PBE algorithms such as NID_pbe_WithSHA1And3_Key_TripleDES_CBC will
currently always fail to the EVP_CIPHER_fetch() call, so the fallback to
a legacy algorithm always happens. In this case the error stack should
ignore the fetch error.
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15473)
These multi-prime tests were omitted when genrsa was deprecated but not
returned when it was restored.
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15472)
These tests were omitted when genrsa was deprecated but not returned when
it was restored.
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15472)
New style BIO_debug_callback_ex() function added to provide
replacement for BIO_debug_callback().
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15440)
We add the concept of preparation recipes, which are performed
unconditionally. They are all expected to match the pattern
test/recipes/00-prep_*.t.
We add one such preparation recipe, test/recipes/00-prep_fipsmodule_cnf.t,
which helps us generate a test specific fipsmodule.cnf, to be used by
all other tests.
Fixes#15166
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15436)
A pairwise test runs only in FIPS mode.
An assumption about the size of the 'to' buffer passed to
RSA_private_decrypt() was incorrect. It needs to be up to RSA_size()
bytes long - so a fixed buffer of 256 bytes was not large enough.
An exiting malloc has increased in size to allocate buffer space for
both the encrypt and decrypt buffer.
The existing test used 2080 bits which was not quite large enough to
trigger the issue. A test using 3072 bits has been added.
Reported by Mark Powers from Acumen.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15447)
The test_pkcs5_pbe() function is required twice:
once `if !defined OPENSSL_NO_RC4 && !defined OPENSSL_NO_MD5`
and once `if !defined OPENSSL_NO_DES && !defined OPENSSL_NO_SHA1`
Hence there should be `||` between those. Currently the build fails
if the first condition is false, while the second is true.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15432)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/15276)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/15276)
We have reports that some are using example.com in their /etc/hosts
for testing purposes, so we can't necessarily assume that those will
fail.
We fix it by using "random" hosts in that domain.
Fixes#15395
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15398)
pointers to provider size algorithm contexts.
Fixes#14284
The gettable_ctx_params methods were confusingly passing a 'provctx' and
a provider context which are completely different objects.
Some objects such as EVP_KDF used 'data' while others such as EVP_MD used 'provctx'.
For libcrypto this 'ctx' is an opaque ptr returned when a providers algorithm
implementation creates an internal context using a new_ctx() method.
Hence the new name 'algctx'.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15275)
The FIPS provider leaks a RAND if the POST is run at initialisation time.
This test case reliably reproduces this event.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15278)
The int64_t type was converted to int (truncation).
Negative values were not handled at all.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15396)
We do this by making them aliases for strtoull and strtoll, since long
long is the current largest integer that have this sort of routine on
VMS.
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15366)
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15371)
If the global properties are updated after a provider with a child libctx
has already started we need to make sure those updates are mirrored in
that child.
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15242)
Now that we can become "in init" directly after the call, test the
various scenarios where explicit SSL_do_handshake() calls can come
into play.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14817)
Add -client_renegotiation flag support. The -client_renegotiation flag is
equivalent to SSL_OP_ALLOW_CLIENT_RENEGOTIATION. Add support to the app,
the config code, and the documentation.
Add SSL_OP_ALLOW_CLIENT_RENEGOTIATION to the SSL tests. We don't need to
always enable it, but there are so many tests so this is the easiest thing
to do.
Add a test where client tries to renegotiate and it fails as expected. Add
a test where server tries to renegotiate and it succeeds. The second test
is supported by a new flag, -immediate_renegotiation, which is ignored on
the client.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15184)
This is nearly comprehensive, but we cannot exercise the functionality
for PSK-only TLS 1.3 resumption, since openssl talking to openssl will
always negotiate psk_dhe_ke.
Exercise both the TLS 1.3 and 1.2 cases, for initial handshakes
and resumptions, and for ECDHE and FFDHE.
Since RFC 7919 named groups (for FFDHE) are only supported for TLS 1.3,
the TLS 1.2 versions of those scenarios expect to get NID_undef since
the key exchange was not performed using a named group.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14750)
We don't implement RFC 7919 named groups for TLS 1.2, so we can
only test the ECDHE case for non-TLS-1.3.
Interestingly, though the test_key_exchange() routine claimed to
be exercising ffdhe2048 with TLS 1.2, the configured ciphers were
incompatible with DHE key exchange, so we ended up just using RSA
key transport and not doing an ephemeral key exchange at all.
Reconfigure the tests to actually exercise ephemeral key exchange
for both the EC and FF cases (even though we don't use the named
group information for the finite-field case).
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14750)
Convert this file to the new format, that includes the kex_group
integer value. This is needed in order for the round-trip conversion
test to return the same value as the initial input.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14750)
Loading it earlier causes some of the later testing to pass when it should
fail and masked a bug.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15270)
Both at API and at CLI level (for the CMP app only, so far)
there is a new parameter/option: keep_alive.
* 0 means HTTP connections are not kept open after
receiving a response, which is the default behavior for HTTP 1.0.
* 1 means that persistent connections are requested.
* 2 means that persistent connections are required, i.e.,
in case the server does not grant them an error occurs.
For the CMP app the default value is 1, which means preferring to keep
the connection open. For all other internal uses of the HTTP client
(fetching an OCSP response, a cert, or a CRL) it does not matter
because these operations just take one round trip.
If the client application requested or required a persistent connection
and this was granted by the server, it can keep the OSSL_HTTP_REQ_CTX *
as long as it wants to send further requests and OSSL_HTTP_is_alive()
returns nonzero,
else it should call OSSL_HTTP_REQ_CTX_free() or OSSL_HTTP_close().
In case the client application keeps the OSSL_HTTP_REQ_CTX *
but the connection then dies for any reason at the server side, it will
notice this obtaining an I/O error when trying to send the next request.
This requires extending the HTTP header parsing and
rearranging the high-level HTTP client API. In particular:
* Split the monolithic OSSL_HTTP_transfer() into OSSL_HTTP_open(),
OSSL_HTTP_set_request(), a lean OSSL_HTTP_transfer(), and OSSL_HTTP_close().
* Split the timeout functionality accordingly and improve default behavior.
* Extract part of OSSL_HTTP_REQ_CTX_new() to OSSL_HTTP_REQ_CTX_set_expected().
* Extend struct ossl_http_req_ctx_st accordingly.
Use the new feature for the CMP client, which requires extending
related transaction management of CMP client and test server.
Update the documentation and extend the tests accordingly.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15053)
Using OSSL_STORE is too heavy and breaks things.
There were also needed various fixes mainly for missing proper
handling of the SM2 keys in the OSSL_DECODER.
Fixes#14788
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15045)
Force the thread test to use the configuration file via a command line arg.
Use the test library support for libctx creation.
Fixes#15243
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/15256)
An extra field got added to the ffc flags related to FIPS-186-2 key validation, but this field was
not handled by the export/import since the flags were done as string combinations.
To keep this consistent with other object flags they are now passed as seperate OSSL_PARAM fields.
Fixes 'no-cached-fetch' build which uses export/import.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15210)
One of the scenarios constructed in these tests was erroneously
producing successful handshakes until the previous commits, but should
have been failing. Update our expected behavior to match the
specification requirements, and adjust the commentary slightly for
a test case relevant for the other preceding commit.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14749)
This is a minimal version of pull request #15053 including all the
proposed improvements to the HTTP client API and its documentation
but only those code adaptations strictly needed for it.
The proposed new features include
* support for persistent connections (keep-alive),
* generalization to arbitrary request and response types, and
* support for streaming BIOs for request and response data.
The related API changes include:
* Split the monolithic OSSL_HTTP_transfer() into OSSL_HTTP_open(),
OSSL_HTTP_set_request(), a lean OSSL_HTTP_transfer(), and OSSL_HTTP_close().
* Split the timeout functionality accordingly and improve default behavior.
* Extract part of OSSL_HTTP_REQ_CTX_new() to OSSL_HTTP_REQ_CTX_set_expected().
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15147)
Shamelessly culled from #15218.
Co-authored-by: Dr Paul Dale <pauli@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15222)
Add a case where a provider explicitly loads a provider into a child
libctx where it does not already exist.
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14991)
If the ref counts on a child provider change, then this needs to be
reflected in the parent so we add callbacks to do this.
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14991)
Write a test to confirm that if a provider is unloaded/loaded into a
libctx then it is similarly unloaded/loaded from any child libctxs.
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14991)
Check that we can create such a libctx and usable providers are loaded
into it.
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14991)
Add a child OSSL_LIB_CTX that will mirror the providers loaded into the
parent libctx. This is useful for providers that want to use algorithms
from other providers and just need to inherit the providers used by the
application.
Fixes#14925
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14991)
Where an object has multiple ex_data associated with it, then we free that
ex_data in order of priority (high priority first).
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14991)
Add EVP_PKEY_gen(), EVP_PKEY_Q_gen(), EVP_RSA_gen(), and EVP_EC_gen().
Also export auxiliary function OSSL_EC_curve_nid2name()
and improve deprecation info on RSA and EC key generation/management functions.
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/14695)
Reduce from 1e6 iterations to 1e3. Add additional cases to cover the same
range although most intermediate values will be skipped.
Fixes#15185
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15202)
This method ignores the nid and could end up saving out the private key unencrypted
In earlier alpha releases OSSL_num_encoders() returned 0 for this test
case, which then meant that the legacy path was run, and the key was
then correctly encrypted.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15152)
This commit sets the error mark before calling d2i_X509_SIG
and clear it if that function call is successful.
The motivation for this is that if d2i_X509_SIG returns NULL then the
else clause will be entered and d2i_PKCS8_PRIV_KEY_INFO will be
called. If d2i_X509_SIG raised any errors those error will be on the
error stack when d2i_PKCS8_PRIV_KEY_INFO gets called, and even if it
returns successfully those errors will still be on the error stack.
We ran into this issue when upgrading Node.js to 3.0.0-alpha15.
More details can be found in the ref links below.
Refs: https://github.com/nodejs/node/issues/38373
Refs: https://github.com/danbev/learning-libcrypto/blob/master/notes/wrong-tag-issue2.md
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Ben Kaduk <kaduk@mit.edu>
(Merged from https://github.com/openssl/openssl/pull/15067)
This helps compensating for deprecated functions such as HMAC()
and reduces clutter in the crypto lib, apps, and tests.
Also fixes memory leaks in generate_cookie_callback() of apps/lib/s_cb.c.
and replaces 'B<...>' by 'I<...>' where appropriate in HMAC.pod
Partially fixes#14628.
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14664)
Add -cipher and -digest as short forms of -macopt cipher: and -macopt digest:
respectively.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15189)
This adds -digest, -mac and -cipher which correspond to -kdfopt digest: and
-kdfopt mac: and -kdfopt cipher: respectively.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15190)
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15130)
Add OSSL_STORE_PARAM_INPUT_TYPE and make it possible to be
set when OSSL_STORE_open_ex() or OSSL_STORE_attach() is called.
The input type format is enforced only in case the file
type file store is used.
By default we use FORMAT_UNDEF meaning the input type
is not enforced.
Fixes#14569
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15100)
Also remove redundant opt_name() and make names of opt_{i,u}ntmax() consistent.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15111)
The "bad DTLS" tests run into trouble due to the special behavior
for that "bad" version, and the SSL record tests need to set the
-legacy_server_connect flag to allow an SSLv2 ClientHello to work
against any TLS server (since SSLv2 ClientHello messages cannot
carry extensions as would be needed in order to negotiate the use
of the renegitiation_info extension).
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15127)
Also add a negative test, and fix typo's.
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15090)
Use official (first) names for wrapping algorithms.
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14182)
Setting an output length higher than 8191 was causing a buffer overflow.
This was reported by Acumen (FIPS lab).
The max output size has increased to ~2M and it now checks this during set_parameters.
The encoder related functions now pass in the maximum size of the output buffer so they
can correctly check their size. kmac_bytepad_encode_key() calls bytepad twice in
order to calculate and check the length before encoding.
Note that right_encode() is currently only used in one place but this
may change if other algorithms are supported (such as TupleHash).
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15106)
Check that reading/writing to a core bio via BIO_new_from_core_bio()
works as expected.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15072)
A pair of the disabled string checks were incorrect.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/15082)
Fixes#15031
The maybe_stdin needed to be passed to load_key_certs_crls().
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15058)
SHA1 is now in security level 0. SHA1 is required for DTLSv1.1. Therefore
ssl_test_new needed some adjustments in the event that DTLSv1.2 is disabled.
There are also adjustments required if using the FIPS module and DTLSv1.2
is disabled. The only DTLS version supported by the FIPS module is
DTLSv1.2.
Fixes #14956
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15047)
SHA1 is now in security level 0. SHA1 is required for DTLSv1.1. Therefore
sslapitest needed some adjustments in the event that DTLSv1.2 is disabled.
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15047)
SHA1 is now in security level 0. SHA1 is required for DTLSv1.1. Therefore
dtlstest needed some adjustments in the event that DTLSv1.2 is disabled.
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15047)
We test that sending a Finished message instead of a ClientHello results
in an unexpected message error.
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14930)
Check that we don't see any threading issues when loading/unloading a
provider from multiple threads.
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15010)
The X509 version APIs return the numerical values of the version
numbers, which are one off from the names. This is a bit confusing.
Where they don't get it wrong (accidentally making an "X509v4"
certificate), callers tend to try commenting every call site to explain
the mismatch, including in OpenSSL itself.
Define constants for these values, so code can be self-documenting and
callers are nudged towards the right values.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14549)
Disabling memleaktest under MSVC because leak detection is not a supported feature with MSVC's AddressSanitizer. Leaving ASan enabled in this case causes a test failure because the test suite is expecting the leak to be detected.
CLA: trivial
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14581)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15018)
The replacement functions EVP_PKEY_eq() and EVP_PKEY_parameters_eq()
already exist.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/14997)
Fix dh_rfc5114 option in genpkey.
Fixes#14145Fixes#13956Fixes#13952Fixes#13871Fixes#14054Fixes#14444
Updated documentation for app to indicate what options are available for
DH and DHX keys.
DH and DHX now have different keymanager gen_set_params() methods.
Added CHANGES entry to indicate the breaking change.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14883)
Some keys with groups that aren't supported by FIPS were still used
for Derive stanzas, even when testing with the FIPS provider.
This was due to the flaw in evp_keymgmt_util_try_import() that meant
that even though the key was invalid for FIPS, it could still come
through, because the imported keydata wasn't cleared on import error.
With that flaw corrected, these few Derive stanzas start failing.
We mitigate this by making of "offending" Derive stanzas only
available with the default provider.
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/15008)
One of the KDFs and one of the MACs use DES as an underlying algorithm in some
tests. Separate these out into their own files which are conditionally excluded.
Fixes#14958
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14975)
In this case, there was a slight different error output format that wasn't
being accounted for in the error test.
Fixes#14961
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14976)
The TLS curves test strong assumes that TLS 1.2 and TLS 1.3 are present.
It is only conditioned out if TLS 1.2 isn't. This changes also conditions
it out if TLS 1.3 isn't present.
Fixes ##14965
Reviewed-by: Ben Kaduk <kaduk@mit.edu>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14978)
The evp_extra_test program was trying to validate these curves when they were
not build.
Fixes#14959
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14977)
CLA: trivial
Signed-off-by: MichaM <contact-micha+github@posteo.de>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14879)
In function test_EVP_PKEY_ffc_priv_pub, params is freed via OSSL_PARAM_free() at line 577.
If the condition at line 581 is true, the execution will goto err, and params will be freed again at line 630.
The same problem also happens at line 593 and line 609, which causes two double free bugs.
Bugs reported by @Yunlongs
Fixes 14916
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14921)
Fixes#14902
Also add workaround of `sudo hostname localhost` for the
intermittent test failures seen in CI.
Reviewed-by: Ben Kaduk <kaduk@mit.edu>
(Merged from https://github.com/openssl/openssl/pull/14872)
Also includes testing for OSSL_LIB_CTX_get0_global_default().
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14890)
One was related to probing for the combination of signature and hash
algorithm together. This is currently not easily possible. The TODO(3.0)
is converted to a normal comment and I've raised the problem as issue
number #14885 as something to resolve post 3.0.
The other TODO was a hard coded limit on the number of groups that could
be registered. This has been amended so that there is no limit.
Fixes#14333
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14886)
Because of aliases, retrieved names won't always match one specific
string. A safer way to check is to fetch the digest from the
retrieved name and check it's the expected one with the help of
EVP_MD_is_a().
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14498)
When test cases were added with ADD_ALL_TESTS_NOSUBTEST(), all those
iteration verdicts were summarized as if it was one single case. This
modification gets each iteration verdict displayed separately instead.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14498)
Add a "where did this EVP_{CIPHER,MD} come from" flag: global, via fetch,
or via EVP_{CIPHER,MD}_meth_new. Update EVP_{CIPHER,MD}_free to handle all
three origins. The flag is deliberately right before some function pointers,
so that compile-time failures (int/pointer) will occur, as opposed to
taking a bit in the existing "flags" field. The "global variable" flag
is non-zero, so the default case of using OPENSSL_zalloc (for provider
ciphers), will do the right thing. Ref-counting is a no-op for
Make up_ref no-op for global MD and CIPHER objects
Deprecate EVP_MD_CTX_md(). Added EVP_MD_CTX_get0_md() (same semantics as
the deprecated function) and EVP_MD_CTX_get1_md(). Likewise, deprecate
EVP_CIPHER_CTX_cipher() in favor of EVP_CIPHER_CTX_get0_cipher(), and add
EVP_CIPHER_CTX_get1_CIPHER().
Refactor EVP_MD_free() and EVP_MD_meth_free() to call new common
evp_md_free_int() function.
Refactor EVP_CIPHER_free() and EVP_CIPHER_meth_free() to call new common
evp_cipher_free_int() function.
Also change some flags tests to explicit test == or != zero. E.g.,
if (flags & x) --> if ((flags & x) != 0)
if (!(flags & x)) --> if ((flags & x) == 0)
Only done for those lines where "get0_cipher" calls were made.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14193)
Change:
EVP_RAND_gettable_ctx_params -> EVP_RAND_CTX_gettable_params
EVP_RAND_settable_ctx_params -> EVP_RAND_CTX_settable_params
Which brings them in line with the other similar functions for other algorithm
types.
Fixes#14880
Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14893)
Adds a mapping from "digestsize" to "size" for setting a param.
Fixes#14370
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14850)
We use type elsewhere and documenting the 'first' in the
name of the call is a little bit superfluous making the
name too mouthful.
Also rename EVP_PKEY_typenames_do_all to
EVP_PKEY_type_names_do_all to keep the words separated by
underscore.
Fixes#14701
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14868)
Fixes#14808
Validation checks were moved into EVP_PKEY_derive_set_peer() which broke
an external negative test. Originally the old code was semi working by checking the peers public key was in the range of other parties p. It was not actually ever
checking that the domain parameters were consistent between the 2
parties. It now checks the parameters match as well as validating the
peers public key.
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14823)
It's possible to set an invalid protocol list that will be sent in a
ClientHello. This validates the inputs to make sure this does not
happen.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14815)
Fixes#14807
Compliance with IG 9.4 requires that an inverse cipher function be
tested if one is implemented. Just running AES_GCM encrypt/decrypt does not meet this
requirement (Since only ECB, CBC, XTS, KW, KWP support the inverse
function during decryption mode).
Added a mode to the cipher test so that the AES_GCM only does an encrypt
and AES_ECB only does a decrypt. TDES still does both.
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14825)
OTC recently voted that EVP_PKEY types will be immutable in 3.0. This
means that EVP_PKEY_set_alias_type can no longer work and should be
removed entirely (applications will need to be rewritten not to use it).
It was primarily used for SM2 which no longer needs this call.
Applications should generate SM2 keys directly (without going via an EC
key first), or otherwise when loading keys they should automatically be
detected as SM2 keys.
Fixes#14379
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14803)
It has always been the case that KTLS is not compiled by default. However
if it is compiled then it was automatically used unless specifically
configured not to. This is problematic because it avoids any crypto
implementations from providers. A user who configures all crypto to use
the FIPS provider may unexpectedly find that TLS related crypto is actually
being performed outside of the FIPS boundary.
Instead we change KTLS so that it is disabled by default.
We also swap to using a single "option" (i.e. SSL_OP_ENABLE_KTLS) rather
than two separate "modes", (i.e. SSL_MODE_NO_KTLS_RX and
SSL_MODE_NO_KTLS_TX).
Fixes#13794
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14799)
This is necessary to keep compatibility with 1.1.1 implementation
of the CBC, OFB, and CFB mode ciphers.
Fixes#14704
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14811)
These functions are prerequisites for implementing EVP_PKEY_todata().
OSSL_PARAM_dup() is required to make a deep copy of the exported
params (since the provider export() uses a OSSL_PARAM_BLD which throws away the
data after the call), and then use OSSL_PARAM_merge() to add some additional params
that can be passed to the EVP_PKEY_todata().
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14785)
Windows builds show the following warning:
(..\apps\ca.c(2643): warning C4267: 'function': conversion
from 'size_t' to 'int', possible loss of data)
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14453)
X509_VERIFY_PARAM_inherit() now copies hostflags independently of hosts.
Previously hostflags were only copied when at least one host was set.
Typically applications don't configure hosts on SSL_CTX. The change
enables applications to configure hostflags on SSL_CTX and have OpenSSL
copy the flags from SSL_CTX to SSL.
Fixes: https://github.com/openssl/openssl/issues/14579
Signed-off-by: Christian Heimes <christian@python.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14743)
It's been deemed unlikely that these will end up in OpenSSL error
records, so we simply don't test them if they happen to be among the
error codes that perl has support for.
Fixes#14763
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14779)
Fixes#14401
Note that this moves the public key check out of DH compute_key() since
key validation does not belong inside this primitive..
The check has been moved to the EVP_PKEY_derive_set_peer() function so that
it generally applies to all exchange operations.. Use EVP_PKEY_derive_set_peer_ex()
to disable this behaviour.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14717)
In 1.1.1 the ctrl EVP_PKEY_CTRL_RSA_KEYGEN_BITS would fail immediately
if the number of bits was too small. In 3.0 it always succeeds, and only
fails later during the key generation stage.
We fix that so that it fails early like it used to in 1.1.1.
Note that in 1.1.1 it fails with a -2 return code. That is not the case
in 3.0 and has not been addressed here (see #14442)
Fixes#14443
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14702)
There's no point in specifying them separately, since they're the same.
Also the OFB-AES192.Decrypt vectors specified the wrong operation, so we
were running some encryption tests twice and missing some decryption
tests.
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14625)
AIX has permission problems of the form:
lsof: can't open /dev/mem: Permission denied
lsof: can't open /dev/kmem: Permission denied
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14692)
Name mixups cleared, and a few more test case result files that
arent't removed, making forensics on failed tests easier.
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14505)
Fixes#14481
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14684)
Use OSSL_DECODER to decode the PKCS8 data to create provided keys.
If that fails fallback to the legacy implementation.
Fixes#14302
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14659)
We perform a reneg handshake, where the second ClientHello drops the
sig_algs extension. It must also contain cert_sig_algs for the test to
work.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
To improve debug information in case of test failures source
file and line arguments are added to test callbacks.
Fixes#14331
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14567)
with AVX512_IFMA + AVX512_VL instructions, primarily for RSA CRT private key
operations. It uses 256-bit registers to avoid CPU frequency scaling issues.
The performance speedup for RSA2k signature on ICL is ~2x.
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/13750)
Fixes#14559
The intitial implementation of the gets() function tried using the next bio's gets() function.
For a file BIO this returned incorrect data for binary data containing 0x00.
Just buffering all data during gets() did not work however since some
applications open and close the bio multiple times when dealing with pem
files containing multiple entries.. This does not work
when reading from stdin unless the data if buffered one byte at a time.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14599)
There are a few test cases at the end of test/recipes/30-test_evp.t,
which are designed to check that loading DSA keys when DSA is disabled,
or SM2 keys when SM2 is disables fail in an understandable way. These
needed a small adjustment.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14314)