This implementation is written in endian agnostic C code. No attempt
at providing machine specific assembly code has been made. This
implementation expands the evptests by including the test cases from
RFC 5794 and ARIA official site rather than providing an individual
test case. Support for ARIA has been integrated into the command line
applications, but not TLS. Implemented modes are CBC, CFB1, CFB8,
CFB128, CTR, ECB and OFB128.
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2337)
The core SipHash supports either 8 or 16-byte output and a configurable
number of rounds.
The default behavior, as added to EVP, is to use 16-byte output and
2,4 rounds, which matches the behavior of most implementations.
There is an EVP_PKEY_CTRL that can control the output size.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2216)
In 1.1.0 we only allowed a strictly increasing version number in the *.num
files, i.e. you could never introduce a symbol at the end of the *.num file
with a lower version number than the one preceding it. This made sense for
1.1.0. However in master we may be introducing symbols for backport to
1.1.0. Therefore it is ok in master to have a symbol for version 1.1.0c
coming after a symbol for version 1.1.1.
This commit fixes the check in mkdef.pl to be a bit looser to allow this.
Reviewed-by: Richard Levitte <levitte@openssl.org>
The prevailing style seems to not have trailing whitespace, but a few
lines do. This is mostly in the perlasm files, but a few C files got
them after the reformat. This is the result of:
find . -name '*.pl' | xargs sed -E -i '' -e 's/( |'$'\t'')*$//'
find . -name '*.c' | xargs sed -E -i '' -e 's/( |'$'\t'')*$//'
find . -name '*.h' | xargs sed -E -i '' -e 's/( |'$'\t'')*$//'
Then bn_prime.h was excluded since this is a generated file.
Note mkerr.pl has some changes in a heredoc for some help output, but
other lines there lack trailing whitespace too.
Reviewed-by: Kurt Roeckx <kurt@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
The macros that produce PEM_write_FOO() andd PEM_read_FOO() only do so
unless 'no-stdio' has been configured. mkdef.pl should mimic that by
marking those functions with the "STDIO" algo.
Reviewed-by: Rich Salz <rsalz@openssl.org>
If application uses any of Windows-specific interfaces, make it
application developer's respondibility to include <windows.h>.
Rationale is that <windows.h> is quite "toxic" and is sensitive
to inclusion order (most notably in relation to <winsock2.h>).
It's only natural to give complete control to the application developer.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
no-cmac was failing on Windows/VMS due to libcrypto.num not marking the
CMAC functions properly. Found due to the new symbol consistency test.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Add copyright to most .pl files
This does NOT cover any .pl file that has other copyright in it.
Most of those are Andy's but some are public domain.
Fix typo's in some existing files.
Reviewed-by: Richard Levitte <levitte@openssl.org>
libssl needs to have access to some internal libcrypto symbols.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
VisualStudio 2015 has a bug where an internal compiler error was occurring.
By reordering the DEFINE_STACK_OF declarations for SSL_CIPHER and SSL_COMP
until after the ssl3.h include everything seems ok again.
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
mkdef.pl was issuing the following error:
Use of uninitialized value within %tag in numeric eq (==) at
util/mkdef.pl line 560, <IN> line 92
This was because it was treating a __cplusplus "#ifdef" check as a "tag"
but then skipping over the corresponding "#endif". Therefore after
processing a file it still had "left over" tags from processing the
previous file. It was also getting confused by "#if" checks that didn't
match is pre-defined styles.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Add -DBIO_DEBUG to --strict-warnings.
Remove comments about outdated debugging ifdef guards.
Remove md_rand ifdef guarding an assert; it doesn't seem used.
Remove the conf guards in conf_api since we use OPENSSL_assert, not assert.
For pkcs12 stuff put OPENSSL_ in front of the macro name.
Merge TLS_DEBUG into SSL_DEBUG.
Various things just turned on/off asserts, mainly for checking non-NULL
arguments, which is now removed: camellia, bn_ctx, crypto/modes.
Remove some old debug code, that basically just printed things to stderr:
DEBUG_PRINT_UNKNOWN_CIPHERSUITES, DEBUG_ZLIB, OPENSSL_RI_DEBUG,
RL_DEBUG, RSA_DEBUG, SCRYPT_DEBUG.
Remove OPENSSL_SSL_DEBUG_BROKEN_PROTOCOL.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Three header files from crypto/include/internal were used by
util/mkdef.pl. This should never be needed. Some test program used
these, which made it a valid reason at the time to make the some
internal symbols public in the shared libraries, but that's not the
case any more.
However, to be able to link libssl.so, some symbols found in
include/internal headers still need to be made public.
Reviewed-by: Andy Polyakov <appro@openssl.org>
Once upon a time, there was chop, which somply chopped off the last
character of $_ or a given variable, and it was used to take off the
EOL character (\n) of strings.
... but then, you had to check for the presence of such character.
So came chomp, the better chop which checks for \n before chopping it
off. And this worked well, as long as Perl made internally sure that
all EOLs were converted to \n.
These days, though, there seems to be a mixture of perls, so lines
from files in the "wrong" environment might have \r\n as EOL, or just
\r (Mac OS, unless I'm misinformed).
So it's time we went for the more generic variant and use s|\R$||, the
better chomp which recognises all kinds of known EOLs and chops them
off.
A few chops were left alone, as they are use as surgical tools to
remove one last slash or one last comma.
NOTE: \R came with perl 5.10.0. It means that from now on, our
scripts will fail with any older version.
Reviewed-by: Rich Salz <rsalz@openssl.org>
As part of this, change util/mkdef.pl to stop adding libraries to
depend on in its output. mkdef.pl should ONLY output a symbol
vector.
Because symbol names can't be longer than 31 characters, we use the
compiler to shorten those that are longer down to 23 characters plus
an 8 character CRC. To make sure users of our header files will pick
up on that automatically, add the DEC C supported extra headers files
__decc_include_prologue.h and __decc_include_epilogue.h.
Furthermore, we add a config.com, so VMS people can configure just as
comfortably as any Unix folks, thusly:
@config
Reviewed-by: Rich Salz <rsalz@openssl.org>
util/mkdef.pl and Makefile.shared needs to know about the source and
the build directories.
Additionally, Makefile.shared needs to know how to build shared
libraries in a directory other than the current one.
Reviewed-by: Ben Laurie <ben@openssl.org>
This is an internal facility, never documented, not for
public consumption. Move it into ssl (where it's only used
for DTLS).
I also made the typedef's for pqueue and pitem follow our style: they
name structures, not pointers.
Reviewed-by: Richard Levitte <levitte@openssl.org>
For this adaptation, the variables $options and $version needed to
move to %config in Configure, and why not move all other variables
holding diverse version numbers at the same time?
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
It seems that the r modifier for s/// is fairly new. It's reported
not to exist in perl 5.10.1, so it's better to avoid it when
possible.
Reviewed-by: Tim Hudson <tjh@openssl.org>
The entropy-gathering daemon is used only on a small number of machines.
Provide a configure knob so that EGD support can be disabled by default
but re-enabled on those systems that do need it.
Reviewed-by: Dr. Stephen Henson <steve@openssl.org>
It was assumed that the syntax FOO/Foo=PROCEDURE would create both an
upper case and mixed case symbol in the GST. Not so, it requires
having both FOO/Foo=PROCEDURE (to create the upper case alias) and
Foo=PROCEDURE (to create the mixed case slot).
We make sure that any symbol always occupies two slots (even those
that don't exist) by filling up with SPARE when necessary. That will
assure that any changes will still have the same symbols in the same
slots no matter what (save a complete rewrite of the ordinals files).
Reviewed-by: Rich Salz <rsalz@openssl.org>
It was assumed that a dummy with the type PRIVATE_PROCEDURE would
simply occupy a slot but otherwise ignore the symbol. Not so, but
there is SPARE for that purpose.
Reviewed-by: Rich Salz <rsalz@openssl.org>
In order for mkdep to find #ifdef'd functions, they must be
wrapped (in the header file) with
#ifndef OPENSSL_NO_...
So do that for various CRYPTO_mem_debug... things.
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
The previous commit introduced a new file format for ssleay.num and
libeay.num, i.e. the introduction of a version field. Therefore the update
capability in mkdef.pl needs updating to take account of the new format.
Reviewed-by: Richard Levitte <levitte@openssl.org>
On Linux when creating the .so file we were exporting all symbols. We should
only be exporting public symbols. This commit fixes the issue. It is only
applicable to linux currently although the same technique may work for other
platforms (e.g. Solaris should work the same way).
This also adds symbol version information to our exported symbols.
Reviewed-by: Richard Levitte <levitte@openssl.org>
This code does open-coded division on 64-bit quantities and thus when
building with GCC on 32-bit platforms will require functions such as
__umoddi3 and __udivdi3 from libgcc.
In constrained environments such as firmware, those functions may not
be available. So make it possible to compile out SCT support, which in
fact (in the case of UEFI) we don't need anyway.
Signed-off-by: Rich Salz <rsalz@akamai.com>
Reviewed-by: Tim Hudson <tjh@openssl.org>
This does 64-bit division and multiplication, and on 32-bit platforms
pulls in libgcc symbols (and MSVC does similar) which may not be
available. Mostly done by David Woodhouse.
Reviewed-by: Dr. Stephen Henson <steve@openssl.org>
This reverts the non-cleanup parts of commit c73ad69017. We do actually
have a reasonable use case for OPENSSL_NO_RFC3779 in the EDK2 UEFI
build, since we don't have a strspn() function in our runtime environment
and we don't want the RFC3779 functionality anyway.
In addition, it changes the default behaviour of the Configure script so
that RFC3779 support isn't disabled by default. It was always disabled
from when it was first added in 2006, right up until the point where
OPENSSL_NO_RFC3779 was turned into a no-op, and the code in the
Configure script was left *trying* to disable it, but not actually
working.
Signed-off-by: Rich Salz <rsalz@akamai.com>
Reviewed-by: Tim Hudson <tjh@openssl.org>
Given the pervasive nature of TLS extensions it is inadvisable to run
OpenSSL without support for them. It also means that maintaining
the OPENSSL_NO_TLSEXT option within the code is very invasive (and probably
not well tested). Therefore it is being removed.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
There are header files in crypto/ that are used by the rest of
OpenSSL. Move those to include/internal and adapt the affected source
code, Makefiles and scripts.
The header files that got moved are:
crypto/constant_time_locl.h
crypto/o_dir.h
crypto/o_str.h
Reviewed-by: Matt Caswell <matt@openssl.org>
Following on from the removal of libcrypto and libssl support for Kerberos
this commit removes all remaining references to Kerberos.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Remove RFC2712 Kerberos support from libssl. This code and the associated
standard is no longer considered fit-for-purpose.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Rather than making include/openssl/foo.h a symlink to
crypto/foo/foo.h, this change moves the file to include/openssl/foo.h
once and for all.
Likewise, move crypto/foo/footest.c to test/footest.c, instead of
symlinking it there.
Originally-by: Geoff Thorpe <geoff@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
For the moment, this is specially crafted for DECLARE_DEPRECATED because
that's where we found the problem, but it can easily be expanded to other
types of special delarations when needed.
Reviewed-by: Matt Caswell <matt@openssl.org>
Disabling HMAC doesn't work. If it did it would end up disabling a lot of
OpenSSL functionality (it is required for all versions of TLS for example).
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
TABLE wasn't updated from a previous Configure change
Missed an RMD160/RIPE/RIPEMD unification in mkdef.pl
Makefile install_sw referenced file doc/openssl-shared.txt (RT3686)
Needed to run 'make update' because
- Various old code has been removed
- Varous old #ifdef tests were removed
Reviewed-by: Richard Levitte <levitte@openssl.org>
Remove support for SHA0 and DSS0 (they were broken), and remove
the ability to attempt to build without SHA (it didn't work).
For simplicity, remove the option of not building various SHA algorithms;
you could argue that SHA_224/256/384/512 should be kept, since they're
like crypto algorithms, but I decided to go the other way.
So these options are gone:
GENUINE_DSA OPENSSL_NO_SHA0
OPENSSL_NO_SHA OPENSSL_NO_SHA1
OPENSSL_NO_SHA224 OPENSSL_NO_SHA256
OPENSSL_NO_SHA384 OPENSSL_NO_SHA512
Reviewed-by: Richard Levitte <levitte@openssl.org>
Remove OPENSSL_NO_RFCF3779.
Also, makevms.com was ignored by some of the other cleanups, so
I caught it up. Sorry I ignored you, poor little VMS...
Reviewed-by: Richard Levitte <levitte@openssl.org>
Also introduce OPENSSL_USE_DEPRECATED. If OPENSSL_NO_DEPRECATED is
defined at config stage then OPENSSL_USE_DEPRECATED has no effect -
deprecated functions are not available.
If OPENSSL_NO_DEPRECATED is not defined at config stage then
applications must define OPENSSL_USE_DEPRECATED in order to access
deprecated functions.
Also introduce compiler warnings for gcc for applications using
deprecated functions
Reviewed-by: Rich Salz <rsalz@openssl.org>
When no-ssl3 is set only make SSLv3 disabled by default. Retain -ssl3
options for s_client/s_server/ssltest.
When no-ssl3-method is set SSLv3_*method() is removed and all -ssl3
options.
We should document this somewhere, e.g. wiki, FAQ or manual page.
Reviewed-by: Emilia Käsper <emilia@openssl.org>
Don't call internal functions directly call them through
SSL_test_functions(). This also makes unit testing work on
Windows and platforms that don't export internal functions
from shared libraries.
By default unit testing is not enabled: it requires the compile
time option "enable-unit-test".
Reviewed-by: Geoff Thorpe <geoff@openssl.org>
o_time.h was removed in commit ff49a94, which breaks "make update"
unless mkdir.pl is updated accordingly.
Signed-off-by: Geoff Thorpe <geoff@openssl.org>
