Perl strings should be compared with 'eq', not '=='.
This only generates a perl warning, so wasn't immediately noticed.
Also, remove the check of disabled 'dsa'. That never made reak sense.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/13645)
The initial thought was that only CS1 mode (the NIST variant) was allowed.
The lab has asked if these other modes should be included.
The algorithm form indicates that these are able to be validated.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/13639)
The OPENSSL_NO_RC4 guard remain around protected PVK tests in
test/endecoder_test.c.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/13648)
We don't need the legacy provider, so don't load it. This avoids
problems in a no-legacy build
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/13595)
If the legacy provider isn't available then we shouldn't attempt to
load or use it.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/13595)
test_enc should not test ciphers that are not available due to a lack
of the legacy provider
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/13595)
In spite of the name the endecoder_legacy_test does not need the
legacy provider. Therefore we avoid loading it so that no-legacy
builds still run the test successfully.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/13595)
If we've been configured with no-legacy then we should not attempt to
load the legacy provider.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/13595)
We skip a test that uses the no-legacy option. Unfortuantely there is
no OPENSSL_NO_LEGACY to test, so we just check whether we were successful
in loading the legacy provider - and if not we skip the test.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/13595)
This includes a general correction in the code (now using the X509V3_CTX_REPLACE flag)
and adding a prominent clarification in the documentation:
If multiple entries are processed for the same extension name,
later entries override earlier ones with the same name.
This is due to an RFC 5280 requirement - the intro of its section 4.2 says:
A certificate MUST NOT include more than one instance of a particular extension.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/13614)
If an SNI callback has been set then we may have no certificuates suitable
for TLSv1.3 use configured for the current SSL_CTX. This should not prevent
us from negotiating TLSv1.3, since we may change the SSL_CTX by the time we
need a suitable certificate.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/13304)
This commit clears the error that might have been set when
ossl_store_get0_loader_int has been called as it will try to retrieve
a loader for the scheme on an empty store, which will cause the error
OSSL_STORE_R_UNREGISTERED_SCHEME to be set.
The motivation for this after returning from
ossl_store_get0_loader_int, OSSL_STORE_attach will continue and try to
fetch a OSSL_STORE_LOADER from the provider.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/12901)
If we're using TLSv1.2 then the test_sigalgs_available test needs to be
careful which ciphersuite is selected in order for the test to behave
correctly.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/13596)
If you have a CHOICE type that it must use explicit tagging - otherwise
the template is invalid. We add tests for this.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
Skip tests that require DSA to be available. While we're doing this
we also remove an OPENSSL_NO_DSA guard in the dhparam app that is no
longer necessary (even though DSA may not be present in our own providers
it could be available via a third party provider).
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/13599)
Fixes#13422
ecdsa_set_ctx_params() was not setting the digest correctly. The side
effect noted was that the check for sha1 when signing was not being
done in fips mode.
Also fixed the dupctx() so that propq is deep copied.
The usage of the variable 'flag_allow_md' was also copied from the dsa code.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/13520)
The certificate path validation procedure specified in RFC 5280 does not
include checking the validity period of the trusted (root) certificate.
Still it is common good practice to perform this check.
Also OpenSSL did this until commit 0e7b1383e, which accidentally killed it.
The current commit restores the previous behavior.
It also removes the cause of that bug, namely counter-intuitive design
of the internal function check_issued(), which was complicated by checks
that actually belong to some other internal function, namely find_issuer().
Moreover, this commit adds a regression check and proper documentation of
the root cert validity period check feature, which had been missing so far.
Fixes#13427
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/13590)
This adds a bit of functionality in ossltest, so it can now be used to
load PEM files. It takes the file name as key ID, but just to make
sure faults aren't ignored, it requires all file names to be prefixed
with 'ot:'.
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/13570)
Ensure we correctly detect if DTLS has been disabled in the client auth
test_ssl_new tests.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/13587)
This adds the -xoflen option to control the output length of the XOF
algorithms, such as SHAKE128 and SHAKE256.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/13245)
The X942 KDF had been modified so that it supports all optional fields - not
just the fields used by CMS.
As there are 2 types of KDF for X942 - this has been made a bit clearer
by adding an X942KDF-ASN1 alias. X942KDF-CONCAT has also been added as an
alias of X963KDF.
This work was instigated as a result of the ACVP tests optionally being
able to use keybits for the supp_pubinfo field.
Setting the parameter OSSL_KDF_PARAM_X942_USE_KEYBITS to 0 allows this
to be disabled.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/13418)
Tests randomisation wasn't reliably printing the seed used on failure in the CIs.
Fixes: #13572
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/13573)
CLA: trivial
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/13584)
This very simple module loader is only linked with the standard C
library, so cannot and should not provide any other symbol to the
module it tries to load. It can thereby be used to verify that the
module it tries to load doesn't have any surprising dependencies when
it's supposed to be self contained.
A test recipe is added to verify the FIPS module with this loader.
Fixes#11020
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/13507)
Various sections of code assumed that at least one of dh or ec would be
available. We also now also need to handle cases where a provider has
a key exchange algorithm and TLS-GROUP that we don't know about.
Fixes#13536
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/13549)
Addition using the NULL pointer (even when adding 0) is undefined
behaviour. Recent versions of ubsan are now complaining about this, so
we fix various instances.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/13513)
The URI length was set to 80 chars, but the URI being built up may
need more space, all depending on the paths used to get to the files
that are to be loaded. If the result needs more than 80 chars, the
test will fail.
Fixed by using PATH_MAX.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/13546)
EVP_PKEY_set1_DH is deprecated so there is no need to test it in a
no-deprecated build.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/13138)
The functions return a DH object and therefore need to be deprecated.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/13138)
pem_read_depr_test needed to be setup in build info so that it only
exists inside an IF[{- !$disabled{'deprecated-3.0'} -}] block.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/13543)
Skip a test that relies on RC2 being present in a no-rc2 build.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/13496)
Commit be9d82bb3 inadvertently disabled ciphersuite testing. This masked
some issues. Therefore we fix this testing.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/13378)
There have been instances where OSSL_STORE got confused between DSA and
DH params (e.g. see issue #13046) due the DER encoding of DH and DSA params
looking identical. Therefore we test that we get the types that we expect.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/13329)
Add tests for various deprecated PEM_read_bio_*() functions to ensure
they can still read the various files.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/13329)
Our test data (test/data.txt and test/data2.txt) are text files, but
declaring them binary means that there will be no line ending
transformation done on them. This is necessary for testing on
non-Unix platforms, where certain tests could otherwise give results
that don't match expected results.
Fixes#13474
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/13477)
By the time the keygen is called the references to strings inside the
gen ctx are floating pointers. A strdup solves this problem.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/13432)
Inside the FIPS module we continue to use FIPS186-4. We prefer FIPS186-2
in the default provider for backwards compatibility reasons.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/13228)
There are non-deprecated replacements so we should use those instead.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/13368)
Check that the size of the DH parameters we select changes according to
the size of the certificate key or symmetric cipher (if no certificate).
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/13368)
We support a number of different ways of setting temporary DH params. We
should test that they all work correctly.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/13368)
Fixes#12627
Changed security check for DSA verification to match SP800-131Ar2 when
the security strength is < 112.
Fixed compilation error when using config opt 'no-fips-securitychecks'
Removed TODO's from 20-test_cli_fips.t - there is no longer an TODO error.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/13387)
It checks that all of these functions have a corresponding
OSSL_ENCODER implementation, and that the output is the same:
- i2d_{TYPE}PrivateKey
- i2d_{TYPE}PublicKey
- i2d_{TYPE}params
- i2d_{TYPE}_PUBKEY
- PEM_write_bio_{TYPE}PrivateKey
- PEM_write_bio_{TYPE}PublicKey
- PEM_write_bio_{TYPE}Parameters
- PEM_write_bio_{TYPE}_PUBKEY
It also checks that all of these functions have a corresponding
OSSL_DECODER implementation, and that the decoding result matches:
- d2i_{TYPE}PrivateKey()
- d2i_{TYPE}PublicKey(),
- d2i_{TYPE}params(),
- d2i_{TYPE}_PUBKEY(),
- PEM_read_bio_{TYPE}PrivateKey()
- PEM_read_bio_{TYPE}PublicKey()
- PEM_read_bio_{TYPE}params()
- PEM_read_bio_{TYPE}_PUBKEY()
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/13262)
This includes error reporting for libcrypto sub-libraries in surprising
places.
This was done using util/err-to-raise
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/13318)
When using `HARNESS_JOBS` to run the tests in parallel, no matter the
level of parallelism that can be used, the monolithic `test_fuzz` takes
a long time to run, conditioning the duration of the whole build.
This commit splits the single `test_fuzz` recipe into separate recipes
for each fuzzer.
The previous mechanism to select individual fuzz tests using the
`FUZZ_TESTS` environment variable is also dropped (and documentation
updated).
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/13307)
Aes-xts mode can be optimized by interleaving cipher operation on
several blocks and loop unrolling. Interleaving needs one ideal
unrolling factor, here we adopt the same factor with aes-cbc,
which is described as below:
If blocks number > 5, select 5 blocks as one iteration,every
loop, decrease the blocks number by 5.
If left blocks < 5, treat them as tail blocks.
Detailed implementation has a little adjustment for squeezing
code space.
With this way, for small size such as 16 bytes, the performance is
similar as before, but for big size such as 16k bytes, the performance
improves a lot, even reaches to 2x uplift, for some arches such as A57,
the improvement even reaches more than 2x uplift. We collect many
performance datas on different micro-archs such as thunderx2,
ampere-emag, a72, a75, a57, a53 and N1, all of which reach 0.5-2x uplift.
The following table lists the encryption performance data on aarch64,
take a72, a75, a57, a53 and N1 as examples. Performance value takes the
unit of cycles per byte, takes the format as comparision of values.
List them as below:
A72:
Before optimization After optimization Improve
evp-aes-128-xts@16 8.899913518 5.949087263 49.60%
evp-aes-128-xts@64 4.525512668 3.389141845 33.53%
evp-aes-128-xts@256 3.502906908 1.633573479 114.43%
evp-aes-128-xts@1024 3.174210419 1.155952639 174.60%
evp-aes-128-xts@8192 3.053019303 1.028134888 196.95%
evp-aes-128-xts@16384 3.025292462 1.02021169 196.54%
evp-aes-256-xts@16 9.971105023 6.754233758 47.63%
evp-aes-256-xts@64 4.931479093 3.786527393 30.24%
evp-aes-256-xts@256 3.746788153 1.943975947 92.74%
evp-aes-256-xts@1024 3.401743802 1.477394648 130.25%
evp-aes-256-xts@8192 3.278769327 1.32950421 146.62%
evp-aes-256-xts@16384 3.27093296 1.325276257 146.81%
A75:
Before optimization After optimization Improve
evp-aes-128-xts@16 8.397965173 5.126839098 63.80%
evp-aes-128-xts@64 4.176860631 2.59817764 60.76%
evp-aes-128-xts@256 3.069126585 1.284561028 138.92%
evp-aes-128-xts@1024 2.805962699 0.932754655 200.83%
evp-aes-128-xts@8192 2.725820131 0.829820397 228.48%
evp-aes-128-xts@16384 2.71521905 0.823251591 229.82%
evp-aes-256-xts@16 11.24790935 7.383914448 52.33%
evp-aes-256-xts@64 5.294128847 3.048641998 73.66%
evp-aes-256-xts@256 3.861649617 1.570359905 145.91%
evp-aes-256-xts@1024 3.537646797 1.200493533 194.68%
evp-aes-256-xts@8192 3.435353012 1.085345319 216.52%
evp-aes-256-xts@16384 3.437952563 1.097963822 213.12%
A57:
Before optimization After optimization Improve
evp-aes-128-xts@16 10.57455446 7.165438012 47.58%
evp-aes-128-xts@64 5.418185447 3.721241202 45.60%
evp-aes-128-xts@256 3.855184592 1.747145379 120.66%
evp-aes-128-xts@1024 3.477199757 1.253049735 177.50%
evp-aes-128-xts@8192 3.36768104 1.091943159 208.41%
evp-aes-128-xts@16384 3.360373443 1.088942789 208.59%
evp-aes-256-xts@16 12.54559459 8.745489036 43.45%
evp-aes-256-xts@64 6.542808937 4.326387568 51.23%
evp-aes-256-xts@256 4.62668822 2.119908754 118.25%
evp-aes-256-xts@1024 4.161716505 1.557335554 167.23%
evp-aes-256-xts@8192 4.032462227 1.377749511 192.68%
evp-aes-256-xts@16384 4.023293877 1.371558933 193.34%
A53:
Before optimization After optimization Improve
evp-aes-128-xts@16 18.07842135 13.96980808 29.40%
evp-aes-128-xts@64 7.933818397 6.07159276 30.70%
evp-aes-128-xts@256 5.264604704 2.611155744 101.60%
evp-aes-128-xts@1024 4.606660117 1.722713454 167.40%
evp-aes-128-xts@8192 4.405160115 1.454379201 202.90%
evp-aes-128-xts@16384 4.401592028 1.442279392 205.20%
evp-aes-256-xts@16 20.07084054 16.00803726 25.40%
evp-aes-256-xts@64 9.192647294 6.883876732 33.50%
evp-aes-256-xts@256 6.336143161 3.108140452 103.90%
evp-aes-256-xts@1024 5.62502952 2.097960651 168.10%
evp-aes-256-xts@8192 5.412085608 1.807294191 199.50%
evp-aes-256-xts@16384 5.403062591 1.790135764 201.80%
N1:
Before optimization After optimization Improve
evp-aes-128-xts@16 6.48147613 4.209415473 53.98%
evp-aes-128-xts@64 2.847744115 1.950757468 45.98%
evp-aes-128-xts@256 2.085711968 1.061903238 96.41%
evp-aes-128-xts@1024 1.842014669 0.798486302 130.69%
evp-aes-128-xts@8192 1.760449052 0.713853939 146.61%
evp-aes-128-xts@16384 1.760763546 0.707702009 148.80%
evp-aes-256-xts@16 7.264142817 5.265970454 37.94%
evp-aes-256-xts@64 3.251356212 2.41176323 34.81%
evp-aes-256-xts@256 2.380488469 1.342095742 77.37%
evp-aes-256-xts@1024 2.08853022 1.041718215 100.49%
evp-aes-256-xts@8192 2.027432668 0.944571334 114.64%
evp-aes-256-xts@16384 2.00740782 0.941991415 113.10%
Add more XTS test cases to cover the cipher stealing mode and cases of different
number of blocks.
CustomizedGitHooks: yes
Change-Id: I93ee31b2575e1413764e27b599af62994deb4c96
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/11399)
The FIPS provider module doesn't have any encoders, the base provider
is needed for that.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/13167)
Since SSLfatal() doesn't take a function code any more, we drop that
argument everywhere. Also, we convert all combinations of SSLfatal()
and ERR_add_data() to an SSLfatal_data() call.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/13316)
Added settable integer parameters OSSL_KDF_PARAM_KBKDF_USE_L, OSSL_KDF_PARAM_KBKDF_USE_SEPARATOR.
This is required for CAVS tests that only use a combined blob of
inputdata. A test showing this use case has been added.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/13258)
The offending test checks that fopen("anydir/") fails. This looks fairly platform
specific. For the test involved this creates a file called
"anydir" on an AIX test machine.
This change was introduced on (Sept 24)
29844ea5b3
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/13309)
With our providers, RSA now supports public key check and key parameter check.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/13334)
It's perfectlt ok to 'plan skip_all' in a subtest, but in that case,
it must really be inside the subtest.
Fixes#13330
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/13331)
We had several cases where the connection failed but we did not
have an error message to differentiate which failure condition had
been triggered. Add some more messages to help clarify what is
going wrong.
[extended tests]
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/13251)
Because this test loads the shared libraries dynamically, there are
cases where that results in errors because the ASAN library wasn't
loaded first. That makes this test unsuitable in an ASAN build.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/13281)
There is no option to output DH params in DER form. -outform doesn't
apply to -genparam with 'openssl genpkey', and it shouldn't.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/13266)
