Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/10191)
Refactor common flags for SSL/TLS connection options.
Update SSL_CONF_cmd.pod to match ordering.
Rewrite much of the documentation.
Fixes#10160
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/10191)
The code was calling EVP_MD_meth_free which is incorrect. It should call
EVP_MD_free. It happened to work but by luck rather than design.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/10973)
The code was calling EVP_MD_meth_free which is incorrect. It should call
EVP_MD_free. It happened to work but by luck rather than design.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/10973)
If the servername cb decides to send back a warning alert then the
handshake continues, but we should not signal to the client that the
servername has been accepted.
Reviewed-by: Ben Kaduk <kaduk@mit.edu>
(Merged from https://github.com/openssl/openssl/pull/10018)
The behaviour of SSL_get_servername() is quite complicated and depends on
numerous factors such as whether it is called on the client or the server,
whether it is called before or after the handshake, what protocol version
was negotiated, and whether a resumption was attempted or was successful.
We attempt to document the behavior more clearly.
Reviewed-by: Ben Kaduk <kaduk@mit.edu>
(Merged from https://github.com/openssl/openssl/pull/10018)
Test this on both the client and the server after a normal handshake,
and after a resumption handshake. We also test what happens if an
inconsistent SNI is set between the original handshake and the resumption
handshake. Finally all of this is also tested in TLSv1.2 and TLSv1.3.
Reviewed-by: Ben Kaduk <kaduk@mit.edu>
(Merged from https://github.com/openssl/openssl/pull/10018)
The SNI behaviour for TLSv1.3 and the behaviour of SSL_get_servername()
was not quite right, and not entirely consistent with the RFC.
The TLSv1.3 RFC explicitly says that SNI is negotiated on each handshake
and the server is not required to associate it with the session. This was
not quite reflected in the code so we fix that.
Additionally there were some additional checks around early_data checking
that the SNI between the original session and this session were
consistent. In fact the RFC does not require any such checks, so they are
removed.
Finally the behaviour of SSL_get_servername() was not quite right. The
behaviour was not consistent between resumption and normal handshakes,
and also not quite consistent with historical behaviour. We clarify the
behaviour in various scenarios and also attempt to make it match historical
behaviour as closely as possible.
Fixes#8822
Reviewed-by: Ben Kaduk <kaduk@mit.edu>
(Merged from https://github.com/openssl/openssl/pull/10018)
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/10873)
Add cmd-nits make target.
Listing options should stop when it hits the "parameters" separator.
Add missing .pod.in files to doc/man1/build.info
Tweak find-doc-nits to try openssl-XXX before XXX for POD files and
change an error messavge to be more useful.
Fix the following pages: ca, cms, crl, dgst, enc,
engine, errstr, gendsa, genrsa, list, ocsp, passwd, pkcs7, pkcs12, rand,
rehash, req, rsautil, s_server, speed, s_time,
sess_id, smime, srp, ts, x509.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/10873)
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/10873)
Backwards compatibility with the old ticket key call back is maintained.
This will be removed when the low level HMAC APIs are finally removed.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/10836)
Use of the low level HMAC functions has been informally discouraged for a
long time. We now formally deprecate them.
Applications should instead use EVP_MAC_CTX_new(3), EVP_MAC_CTX_free(3),
EVP_MAC_init(3), EVP_MAC_update(3) and EVP_MAC_final(3).
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/10836)
Use of the low level CMAC functions has been informally discouraged for a
long time. We now formally deprecate them.
Applications should instead use EVP_MAC_CTX_new(3), EVP_MAC_CTX_free(3),
EVP_MAC_init(3), EVP_MAC_update(3) and EVP_MAC_final(3).
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/10836)
We do this by letting a serializer serialize the provider side key to
a DER blob formatted according to the SubjectPublicKeyInfo structure
(see RFC 5280), and deserialize it in libcrypto using the usual d2i
function.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/10851)
The mechanism to do this is to ask the signature operation for the DER
encoded AlgorithmIdentifier that corresponds to the combination of
signature algorithm and digest algorithm.
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/10920)
The function EVP_PKEY_CTX_new_from_pkey() infers the name of the
algorithm to fetch from the EVP_PKEY that has been supplied as an
argument. But there was no way to specify properties to be used during
that fetch.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/10926)
Because there was a bug in File::Spec::Unix' abs2rel when it was given
relative paths as both PATH and BASE arguments, the directories we
deal with were made to be all absolute. Unfortunately, this meant
getting paths in our verbose test output which are difficult to use
anywhere else (such as a separate test build made for comparison), due
to the constant need to edit all the paths all the time.
We're therefore getting back the relative paths, by doing an extra
abs2rel() in __srctop_file, __srctop_dir, __bldtop_file and
__bldtop_dir, with a 'Cwd::getcwd' call as BASE argument.
Fixes#10628
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/10913)
Curiously enough, perl only warned about the shadowing. However, the
following 'plan' statement got disturbed somehow, as one could notice
the test counter say "11/?" instead of "11/25".
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/10944)
TLS < 1.2 has fixed signature algorithms: MD5+SHA1 for RSA and SHA1 for the
others. TLS 1.2 sends a list of supported ciphers, but allows not sending
it in which case SHA1 is used. TLS 1.3 makes sending the list mandatory.
When we didn't receive a list from the client, we always used the
defaults without checking that they are allowed by the configuration.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
GH: #10784
It replaces apps/server.pem that used a sha1 signature with a copy of
test/certs/servercert.pem that is uses sha256.
This caused the dtlstest to start failing. It's testing connection
sbetween a dtls client and server. In particular it was checking that if
we drop a record that the handshake recovers and still completes
successfully. The test iterates a number of times. The first time
through it drops the first record. The second time it drops the second
one, and so on. In order to do this it has a hard-coded value for the
expected number of records it should see in a handshake. That's ok
because we completely control both sides of the handshake and know what
records we expect to see. Small changes in message size would be
tolerated because that is unlikely to have an impact on the number of
records. Larger changes in message size however could increase or
decrease the number of records and hence cause the test to fail.
This particular test uses a mem bio which doesn't have all the CTRLs
that the dgram BIO has. When we are using a dgram BIO we query that BIO
to determine the MTU size. The smaller the MTU the more fragmented
handshakes become. Since the mem BIO doesn't report an MTU we use a
rather small default value and get quite a lot of records in our
handshake. This has the tendency to increase the likelihood of the
number of records changing in the test if the message size changes.
It so happens that the new server certificate is smaller than the old
one. AFAICT this is probably because the DNs for the Subject and Issuer
are significantly shorter than previously. The result is that the number
of records used to transmit the Certificate message is one less than it
was before. This actually has a knock on impact for subsequent messages
and how we fragment them resulting in one less ServerKeyExchange record
too (the actual size of the ServerKeyExchange message hasn't changed,
but where in that message it gets fragmented has). In total the number
of records used in the handshake has decreased by 2 with the new
server.pem file.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
GH: #10784
This affects the following function, which can now deal with provider
side keys:
- EVP_SealInit()
- EVP_OpenInit()
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/10808)
Provide a "simple" example for affecting the systemwide default behavior
of libssl. The large number of mandatory nested sections makes this
less simple than the main description might suggest.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/10937)
Use of the low level DES functions has been informally discouraged for a
long time. We now formally deprecate them.
Applications should instead use the EVP APIs, e.g. EVP_EncryptInit_ex,
EVP_EncryptUpdate, EVP_EncryptFinal_ex, and the equivalently named decrypt
functions.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/10858)
Now that libssl knows about libctx we should use it wherever we generate
a random number.
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/10927)
This commit introduces functions PKCS8_pkey_add1_attr_by_OBJ and PKCS8_pkey_add1_attr
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/10900)
This is required in order to share code for FIPS related parameter generation and validation routinues.
Note the 'counter' field is now stored as a integer (as that is the form required for generation/validation functions).
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/10860)
Move the x509_V_ERR_xxx definitions from openssl-verify to
X509_STORE_CTX_get_error.pod. Add some missing ones. Consistently
start with a lowercase letter, unless it's an acronym.
Fix some markup mistakes in X509_verify_cert.
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/10132)
@{$config{LDFLAGS}} isn't necessarily split up in pieces, so we need
to check for '-static' with a regexp rather than with an exact string
match.
Fixes#10867
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/10878)
It is the provider version of EVP_PKEY_get_default_digest_nid(). We make
sure to use it in the non-legacy section of do_sigver_init() (internal
implementation for EVP_DigestSignInit() and EVP_DigestVerifyInit())
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/10824)
We've started to see "magic" numbers being used for certain sizes,
such as algorithm names and property query strings.
This change takes care of the few items where buffers for algorithm
names and property query strings are used.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/10928)
The common routine ossl_prov_print_labeled_bignum() didn't print the
BIGNUM quite the way it should. It treated the limbs in a big endian
fashion, when they are really organised in a little endian fashion.
Furthermore, we make it inherit the behaviour from the print of legacy
keys, where a number starting with the high bit set gets an extra zero
printed first.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/10891)
Added comments and cleared an intermediate result.
KAT tests already exist in evppkey.txt (Search for "KAS_ECC_CDH_PrimitiveTest")
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/10838)
make doc-nits was failing due to a merge error on master in missingcrypto.txt.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/10932)
CLA: trivial
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/10816)
If one of the perlasm xlate drivers crashes, OpenSSL's build will
currently swallow the error and silently truncate the output to however
far the driver got. This will hopefully fail to build, but better to
check such things.
Handle this by checking for errors when closing STDOUT (which is a pipe
to the xlate driver).
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/10883)
