Provide some guidelines, as well as some rules for using the locks in
provider_core.c, in order to avoid the introduction of deadlocks.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/16469)
This fixes the following error with gcc10 under strict ANSI conditions:
.../crypto/bio/bss_dgram.c:373:20: error: 'const struct in6_addr' has no member named 's6_addr32'
CLA: trivial
Fixes#16449
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/16451)
Avoid races where 2 threads attempt to configure activation of providers
at the same time. E.g. via an explicit and an implict load of the config
file at the same time.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/16425)
We skip the activation if we already configured them.
Fixes#16250
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/16425)
The legacy implementation duplicates the pctx before creating/verifying
the signature unless EVP_MD_CTX_FLAG_FINALISE is set. We have to do the
same with provided implementations.
Fixes#16321
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/16422)
This allows for passing a NULL pointer with zero max_len.
Invoking memcpy on NULL is undefined behaviour, even if the size is zero.
https://en.cppreference.com/w/c/string/byte/memcpy
The function can now be queried for the necessary buffer length.
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/10541)
Previously there was no check that the supplied buffer was large enough.
It was just assumed to be sufficient. Instead we should check and fail if
not.
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Nicola Tuveri <nic.tuv@gmail.com>
Previously the length of the SM2 plaintext could be incorrectly calculated.
The plaintext length was calculated by taking the ciphertext length and
taking off an "overhead" value.
The overhead value was assumed to have a "fixed" element of 10 bytes.
This is incorrect since in some circumstances it can be more than 10 bytes.
Additionally the overhead included the length of two integers C1x and C1y,
which were assumed to be the same length as the field size (32 bytes for
the SM2 curve). However in some cases these integers can have an additional
padding byte when the msb is set, to disambiguate them from negative
integers. Additionally the integers can also be less than 32 bytes in
length in some cases.
If the calculated overhead is incorrect and larger than the actual value
this can result in the calculated plaintext length being too small.
Applications are likely to allocate buffer sizes based on this and therefore
a buffer overrun can occur.
CVE-2021-3711
Issue reported by John Ouyang.
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Nicola Tuveri <nic.tuv@gmail.com>
Previously if an error path is entered a leak could result.
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: David Benjamin <davidben@google.com>
If FUZZING_BUILD_MODE_UNSAFE_FOR_PRODUCTION is defined then we don't NUL
terminate ASN1_STRING datatypes. This shouldn't be necessary but we add it
any for safety in normal builds.
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: David Benjamin <davidben@google.com>
Check that there's at least one byte in params->base before trying to
read it.
CVE-2021-3712
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: David Benjamin <davidben@google.com>
ASN.1 strings may not be NUL terminated. Don't assume they are.
CVE-2021-3712
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: David Benjamin <davidben@google.com>
ASN.1 strings may not be NUL terminated. Don't assume they are.
CVE-2021-3712
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: David Benjamin <davidben@google.com>
ASN.1 strings may not be NUL terminated. Don't assume they are.
CVE-2021-3712
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: David Benjamin <davidben@google.com>
ASN.1 strings may not be NUL terminated. Don't assume they are.
CVE-2021-3712
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: David Benjamin <davidben@google.com>
ASN.1 strings may not be NUL terminated. Don't assume they are.
CVE-2021-3712
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: David Benjamin <davidben@google.com>
ASN.1 strings may not be NUL terminated. Don't assume they are.
CVE-2021-3712
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: David Benjamin <davidben@google.com>
ASN.1 strings may not be NUL terminated. Don't assume they are.
CVE-2021-3712
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: David Benjamin <davidben@google.com>
ASN.1 strings may not be NUL terminated. Don't assume they are.
CVE-2021-3712
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: David Benjamin <davidben@google.com>
A check is added to fail this function if the string buffer isn't
large enough to accomodate a terminating NUL byte.
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/16334)
Copy the current IV from the cipher context into the kmo/kmf param before
the operation, and copy the modified IV back to the context afterwards.
Without this, an application that obtains the running IV from the context
would still get the original IV, but not the updated one.
This implementation in e_aes.c now matches the code in cipher_aes_hw_s390x.inc
that is used for the provider implementation.
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Reviewed-by: Patrick Steuer <patrick.steuer@de.ibm.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/16291)
There were multiple issues with getting OSSL_PKEY_PARAM_PUB_KEY
from a legacy EVP_PKEY DH and DHX keys.
Fixes#16247
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/16253)
If key length is different from the existing key length and it is not
a settable parameter, raise an error.
Fixes#16277
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/16279)
sscanf() call in ipv4_from_asc does not check that
the string is terminated immediately after the last digit.
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/16201)
If objects are added in a config file the OPENSSL_INIT_LOAD_CONFIG
will be called recursively which results in hang in RUN_ONCE.
Fixes#16186
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/16210)
Calls to the API function EVP_default_properties_enable_fips() will
automatically attempt to load the default config file if it is not
already loaded. Therefore this function should not be called from inside
code to process the config file.
Fixes#16165
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/16168)
We don't treat a failure to load a provider as a fatal error. If it is fatal then
we give up attempting to load the config file - including reading any default
properties. Additionally if an attempt has been made to load a provider then we
disable fallback loading.
Fixes#16166
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/16168)
Make sure the origin is set correctly when duping an EVP_MD or EVP_CIPHER.
Fixes#16157
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/16159)
Most EVP_PKEY_meth_get_*() functions mark the EVP_PKEY_METHOD argument as
const. But 3 did not. We fix those to be consistent.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/16128)
If an engine is non-NULL in EVP_PKEY_CTX_new() call an assert might
have been incorrectly triggered or the engine might be finished
without being inited.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/16137)
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/16138)
It is possible to have a custom EVP_PKEY_METHOD implementation without
having an engine. In those cases we were failing to use that custom
implementation.
Fixes#16088
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Nicola Tuveri <nic.tuv@gmail.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/16118)
It is possible to call built-in EVP_PKEY_METHOD functions with a provided
key. For example this might occur if a custom EVP_PKEY_METHOD is in use
that wraps a built-in EVP_PKEY_METHOD. Therefore our EVP_PKEY_METHOD
functions should not assume that we are using a legacy key. Instead we
get the low level key using EVP_PKEY_get0_RSA() or other similar functions.
This "does the right thing" if the key is actually provided.
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Nicola Tuveri <nic.tuv@gmail.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/16118)
The ASN1_STRING_get0_data(3) manual explitely cautions the reader
that the data is not necessarily NUL-terminated, and the function
X509_alias_set1(3) does not sanitize the data passed into it in any
way either, so we must assume the return value from X509_alias_get0(3)
is merely a byte array and not necessarily a string in the sense
of the C language.
I found this bug while writing manual pages for X509_print_ex(3)
and related functions. Theo Buehler <tb@openbsd.org> checked my
patch to fix the same bug in LibreSSL, see
http://cvsweb.openbsd.org/src/lib/libcrypto/asn1/t_x509a.c#rev1.9
As an aside, note that the function still produces incomplete and
misleading results when the data contains a NUL byte in the middle
and that error handling is consistently absent throughout, even
though the function provides an "int" return value obviously intended
to be 1 for success and 0 for failure, and even though this function
is called by another function that also wants to return 1 for success
and 0 for failure and even does so in many of its code paths, though
not in others. But let's stay focussed. Many things would be nice
to have in the wide wild world, but a buffer overflow must not be
allowed to remain in our backyard.
CLA: trivial
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/16108)
