FLOSS is no longer a dependency for NonStop as of the deprecation of the SPT
thread model builds.
Fixes: #24214
Signed-off-by: Randall S. Becker <randall.becker@nexbridge.ca>
Reviewed-by: Tom Cosgrove <tom.cosgrove@arm.com>
Reviewed-by: Neil Horman <nhorman@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/24217)
This change makes the message on failure consistent with the message on
success by trimming a single space in the error message.
CLA: trivial
Signed-off-by: Enji Cooper <yaneurabeya@gmail.com>
Reviewed-by: Tom Cosgrove <tom.cosgrove@arm.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <ppzgs1@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/24180)
Add the OPENSSL_free() in the error handler to release the "*md_value"
allocated by app_malloc(). To make the code clear and avoid possible
future errors, combine the error handler in the "err" tag.
Then, we only need to use "goto err" instead of releasing the memory
separately.
Since the EVP_MD_get_size() may return negative numbers when an error occurs,
create_query() may fail to catch the error since it only considers 0 as an
error code.
Therefore, unifying the error codes of create_digest() from non-positive
numbers to 0 is better, which also benefits future programming.
Fixes: c7235be ("RFC 3161 compliant time stamp request creation, response generation and response verification.")
Signed-off-by: Jiasheng Jiang <jiasheng@purdue.edu>
Reviewed-by: Neil Horman <nhorman@openssl.org>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/23873)
When using CCM, openssl speed uses the loop function EVP_Update_loop_ccm() which
sets a (fake) tag when decrypting. When using -aead (which benchmarks a different
sequence than normal, to be comparable to TLS operation), the loop function
EVP_Update_loop_aead() is used, which also sets a tag when decrypting.
However, when using defaults, the loop function EVP_Update_loop() is used, which
does not set a tag on decryption, leading to "Error finalizing cipher loop".
To fix this, set a fake tag value if we're doing decryption on an AEAD cipher in
EVP_Update_loop(). We don't check the return value: this shouldn't really be able
to fail, and if it does, the following EVP_DecryptUpdate() is almost certain to
fail, so that can catch it.
The decryption is certain to fail (well, almost certain, but with a very low
probability of success), but this is no worse than at present. This minimal
change means that future benchmarking data should be comparable to previous
benchmarking data.
(This is benchmarking code: don't write real apps like this!)
Fixes#23657
Change-Id: Id581cf30503c1eb766464e315b1f33914040dcf7
Reviewed-by: Paul Yang <kaishen.yy@antfin.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/23757)
- Added options `-not_before` (start date) and `-not-after` (end date)
for explicit setting of the validity period of a certificate in the
apps `ca`, `req` and `x509`
- The new options accept time strings or "today"
- In app `ca`, use the new options as aliases of the already existing
options `-startdate` and `-enddate`
- When used in apps `req` and `x509`, the end date must be >= the start
date, in app `ca` end date < start date is also accepted
- In any case, `-not-after` overrides the `-days` option
- Added helper function `check_cert_time_string` to validate given
certificate time strings
- Use the new helper function in apps `ca`, `req` and `x509`
- Moved redundant code for time string checking into `set_cert_times`
helper function.
- Added tests for explicit start and end dates in apps `req` and `x509`
- test: Added auxiliary functions for parsing fields from `-text`
formatted output to `tconversion.pl`
- CHANGES: Added to new section 3.4
Signed-off-by: Stephan Wurm <atomisirsi@gsklan.de>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21716)
Reviewed-by: Neil Horman <nhorman@openssl.org>
Release: yes
(cherry picked from commit 3764f200f9)
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/24034)
Reviewed-by: Neil Horman <nhorman@openssl.org>
Release: yes
(cherry picked from commit 0ce7d1f355)
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/24034)
Reviewed-by: Tom Cosgrove <tom.cosgrove@arm.com>
Reviewed-by: Neil Horman <nhorman@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/24008)
(cherry picked from commit 1a4b029af5)
The syntax check of the -addext fails because the
X509V3_CTX is used to lookup the referenced section,
but the wrong configuration file is used, where only
a default section with all passed in -addext lines is available.
Thus it was not possible to use the subjectAltName=dirName:section
as an -addext parameter. Probably other extensions as well.
This change affects only the syntax check, the real extension
was already created with correct parameters.
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/23669)
Printing content of an invalid test certificate causes application crash, because of NULL dereference:
user@user:~/openssl$ openssl pkcs12 -in test/recipes/80-test_pkcs12_data/bad2.p12 -passin pass: -info
MAC: sha256, Iteration 2048
MAC length: 32, salt length: 8
PKCS7 Encrypted data: Segmentation fault (core dumped)
Added test cases for pkcs12 bad certificates
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/23632)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/21660)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/21660)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/21660)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/21660)
Return value of function 'SSL_CTX_ctrl', that is called from
SSL_CTX_set1_verify_cert_store() and SSL_CTX_set1_chain_cert_store(),
is not checked, but it is usually checked for this function.
CLA: trivial
Reviewed-by: Tom Cosgrove <tom.cosgrove@arm.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/23647)
(cherry picked from commit 6f794b461c)
strstr() is used to match multiple characters in the haystack,
whereas strchr() is used to matched only single character.
CLA: trivial
Reviewed-by: Tom Cosgrove <tom.cosgrove@arm.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/23347)
The EVP_CIPHER api currently assumes that calls made into several APIs
have already initalized the cipher in a given context via a call to
EVP_CipherInit[_ex[2]]. If that hasnt been done, instead of an error,
the result is typically a SIGSEGV.
Correct that by adding missing NULL checks in the apropriate apis prior
to using ctx->cipher
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22995)
if the private key is output to stdout using the HARNESS_OSSL_PREFIX,
out is a stack of BIOs and must therefore free'd using BIO_free_all.
Steps to reproduce:
$ HARNESS_OSSL_PREFIX=x OPENSSL_CONF=apps/openssl.cnf util/shlib_wrap.sh apps/openssl req -new -keyout - -passout pass: </dev/null
[...]
Direct leak of 128 byte(s) in 1 object(s) allocated from:
#0 0x7f6f692b89cf in __interceptor_malloc ../../../../src/libsanitizer/asan/asan_malloc_linux.cpp:69
#1 0x7f6f686eda00 in CRYPTO_malloc crypto/mem.c:202
#2 0x7f6f686edba0 in CRYPTO_zalloc crypto/mem.c:222
#3 0x7f6f68471bdf in BIO_new_ex crypto/bio/bio_lib.c:83
#4 0x7f6f68491a8f in BIO_new_fp crypto/bio/bss_file.c:95
#5 0x555c5f58b378 in dup_bio_out apps/lib/apps.c:3014
#6 0x555c5f58f9ac in bio_open_default_ apps/lib/apps.c:3175
#7 0x555c5f58f9ac in bio_open_default apps/lib/apps.c:3203
#8 0x555c5f528537 in req_main apps/req.c:683
#9 0x555c5f50e315 in do_cmd apps/openssl.c:426
#10 0x555c5f4c5575 in main apps/openssl.c:307
#11 0x7f6f680461c9 in __libc_start_call_main ../sysdeps/nptl/libc_start_call_main.h:58
SUMMARY: AddressSanitizer: 128 byte(s) leaked in 1 allocation(s).
Reviewed-by: Tom Cosgrove <tom.cosgrove@arm.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/23365)
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/19948)
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/19948)
This changeset adds the counterpart to the '-subj' option to allow overriding
the Issuer. For consistency, the `-subj` option is aliased to `-set_subject`.
The issuer can be specified as following apps/openssl x509 -new -set_issuer
'/CN=example-nro-ta' -subj '/CN=2a7dd1d787d793e4c8af56e197d4eed92af6ba13' ...
This is useful in constructing specific test-cases or rechaining PKI trees
Joint work with George Michaelson (@geeohgeegeeoh)
Reviewed-by: Neil Horman <nhorman@openssl.org>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/23257)
Printing the hostname on bio_out clutters the output and breaks
pipe like forwarding via openssl.
Print the hostname via bio_err.
Fixes#23013
Signed-off-by: Sebastian Andrzej Siewior <sebastian@breakpoint.cc>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/23056)
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/20727)
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/20727)
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/20727)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/21281)
Also add missing getter functionss OSSL_CMP_{CTX,HDR}_get0_geninfo_ITAVs() to CMP API.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/21281)
In the event that a config file contains this sequence:
=======
openssl_conf = openssl_init
config_diagnostics = 1
[openssl_init]
oid_section = oids
[oids]
testoid1 = 1.2.3.4.1
testoid2 = A Very Long OID Name, 1.2.3.4.2
testoid3 = ,1.2.3.4.3
======
The leading comma in testoid3 can cause a heap buffer overflow, as the
parsing code will move the string pointer back 1 character, thereby
pointing to an invalid memory space
correct the parser to detect this condition and handle it by treating it
as if the comma doesn't exist (i.e. an empty long oid name)
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22957)
At some point the asn1parse applet was changed to default the inform to
PEM, and defalt input file to stdin. Doing so broke the -genstr|conf options,
in that, before we attempt to generate an ASN1 block from the provided
genstr string, we attempt to read a PEM input from stdin. As a result,
this command:
openssl asn1parse -genstr OID:1.2.3.4
hangs because we are attempting a blocking read on stdin, waiting for
data that never arrives
Fix it by giving priority to genstr|genconf, such that, if set, will just run
do_generate on that string and exit
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22957)
The ASN1_OBJECT otmp was leaked if X509_VERIFY_PARAM_add0_policy fails.
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22922)
The OPENSSL_DIR_end was missing in case of error.
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22920)
sscanf can return -1 on an empty input string. We need to appropriately
handle such an invalid case.
The instance in OSSL_HTTP_parse_url could cause an uninitialised read of
sizeof(unsigned int) bytes (typically 4). In many cases this uninit read
will immediately fail on the following check (i.e. if the read value
>65535).
If the top 2 bytes of a 4 byte unsigned int are zero then the value will
be <=65535 and the uninitialised value will be returned to the caller and
could represent arbitrary data on the application stack.
The OpenSSL security team has assessed this issue and consider it to be
a bug only (i.e. not a CVE).
Reviewed-by: Todd Short <todd.short@me.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/22961)
On some systems it is too small although the system allows longer
filenames.
Fixes#22886
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Neil Horman <nhorman@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22889)
When a provider can't return parameters, make that a warning instead of an
error, and continue to list further providers.
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
Reviewed-by: Todd Short <todd.short@me.com>
(Merged from https://github.com/openssl/openssl/pull/22866)
When the CMS_ReceiptRequest cannot be created,
the rct_to and rct_from may be leaked.
Reviewed-by: Neil Horman <nhorman@openssl.org>
Reviewed-by: Todd Short <todd.short@me.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22742)
