Options moved: -rand, -writerand, -CApath, -CAfile, -no-CApath, -no-CAfile
Added rand to dgst and srp manpages (they were missing them).
New sections in openssl.pod: Random State Options, Trusted Certificate
Options.
Cleanup and add comments to find-doc-nits
Remove ".in" file support; unless giving specific arguments, this
only runs after configuration
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/10118)
Add a new API to test for primes that can't be misused, deprecated the
old APIs.
Suggested by Jake Massimo and Kenneth Paterson
Reviewed-by: Paul Dale <paul.dale@oracle.com>
GH: #9272
OpenSSL uses some POD directives masquerading as 'comment'
('=for comment' etc). This is abusive and confusing. Instead, we use
our own keyword.
=for openssl whatever
=begin openssl
whatever
=end openssl
(we have never used the multiline form, but might start one day)
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/10048)
Always refer to openssl.pod instead of repeating the same description
everywhere.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/10126)
Better synopsis for 'openssl dgst' and 'openssl enc', correct names
for 'openssl rehash' ('c_rehash' is mentioned there too), correct
option end marker for 'openssl verify', and finally, refer to
sub-commands as sub-commands.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/10065)
"gost" was called "ccgost".
"rsax" was treated like literal input rather than an engine name.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/10065)
Almost all OpenSSL commands are in reality 'openssl cmd', so make sure
they are refered to like that and not just as the sub-command.
Self-references are avoided as much as is possible, and replaced with
"this command". In some cases, we even avoid that with a slight
rewrite of the sentence or paragrah they were in. However, in the few
cases where a self-reference is still admissible, they are done in
bold, i.e. openssl-speed.pod references itself like this:
B<openssl speed>
References to other commands are done as manual links, i.e. CA.pl.pod
references 'openssl req' like this: L<openssl-req(1)>
Some commands are examples rather than references; we enclose those in
C<>.
While we are it, we abolish "utility", replacing it with "command", or
remove it entirely in some cases.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/10065)
Quite a lot of replacables were still bold, and some options were
mentioned without a beginning dash.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/10065)
Ellipses were used to express that the '-rand' value can specify
multiple files, like this:
B<-rand> I<file...>
Because there are conventions around ellipses, this becomes confusing,
because '-rand file...' is normally intepreted to mean that
'-rand file1 file2 file3' would be processed as three randomness
files, which makes no sense.
Rather than making things complicated with more elaborate syntax, we
change it to:
B<-rand> I<files>
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/10065)
Also patch find-doc-nits to ignore a Microsoft trademark and not
flag it as a spelling error.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/10023)
Make find-doc-nits understand that
=for comment ifdef ssl3 ...
in a POD page means that the "-ssl3" flag might be ifdef'd out in the
local environment, and not to complain about it.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9974)
For documentation of all commands with "-flag arg" format them
consistently: "B<-flag> I<arg>", except when arg is literal
(for example "B<-inform> B<PEM>|B<DER>")
Update find-doc-nits to complain if badly formatted strings are found.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/10022)
If the SM2 ID value has not been passed correctly when signing an SM2
certificate/certificate request, a double free occurs. For instance:
openssl req -x509 ... -sm2-id 1234567812345678
The '-sm2-id' should not be used in this scenario, while the '-sigopt' is
the correct one to use. Documentation has also been updated to make the
options more clear.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9958)
Commit b6b66573 (PR #9679) renamed most POD files. This change causes
find-doc-nits to flag misnamed files.
Also fix the two misnamed files that it found.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/10000)
Remove -c/-e/-m aliases, OpenSSL commands don't do that.
Fix typo's in the documentation.
Fix -module flag to print the right thing.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9986)
The dgst command allows MACs to be calculated, the mac command is the more
recent interface for doing the same and provides better access to a wider
range of MACs.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/9962)
Remove reference to EVP_KDF_ctrl_str and replace it with EVP_KDF_CTX_set_params.
Add missing links, and specify two extra KDFs.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9905)
This command is somewhat similar to 'openssl engine', but displays
what it can about the given providers.
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/9697)
'openssl version -r' prints the seed source based on compiler macros.
This does not necessarily reflect the library's idea of what seed
sources to use, so we reimplement the list of seed sources as a
OPENSSL_info() item and display that instead.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/9689)
Change find-doc-nits to complain if a section header is repeated,
within a parent header (i.e., duplicate =head2 within a =head1).
In almost all cases, we just remove the duplicate header, as
it was a "continuation" of the =head1 that was already in affect.
In some cases, just remove "=head1 NOTES", possibly moving text
around, because the "NOTES" were really important parts of the
DESCRIPTION section.
No =headX sections should end with a period.
All =head1 labels should be in all uppercase.
No sub-head (=head2, etc) should be in all uppercase.
Update find-doc-nits to reject the above.
Fixup an internal POD link
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Paul Yang <kaishen.yy@antfin.com>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/9631)
Initially, the manual page entry for the 'openssl cmd' command used
to be available at 'cmd(1)'. Later, the aliases 'openssl-cmd(1)' was
introduced, which made it easier to group the openssl commands using
the 'apropos(1)' command or the shell's tab completion.
In order to reduce cluttering of the global manual page namespace,
the manual page entries without the 'openssl-' prefix have been
deprecated in OpenSSL 3.0 and will be removed in OpenSSL 4.0.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9666)
The current EVP_PEKY_ctrl for SM2 has no capability of parsing an ID
input in hexdecimal.
The newly added ctrl string is called: sm2_hex_id
Test cases and documentation are updated.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9584)
And update find-doc-nits to complain if "=head1 EXAMPLE" is found.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/9602)
With the diverse {get,set}table_params functions, it's possible to
give a more verbose description of the diverse algorithm
implementations. Most notably, we add a description of the parameters
that each implementation is willing to share.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/9576)
Fixup INSTALL and a couple man pages to get rid of "the the" and "in the
in the".
CLA: trivial
Reviewed-by: Paul Yang <kaishen.yy@antfin.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9563)
This avoids leaking bit 0 of the private key.
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
Reviewed-by: Kurt Roeckx <kurt@roeckx.be>
(Merged from https://github.com/openssl/openssl/pull/9363)
3.0.0 is a habit from pre-3.0 OpenSSL, which doesn't make sense with
the new version scheme.
Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9376)
CLA: trivial
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/9288)
SM2 certificate signing request can be created and signed by OpenSSL
now, both in library and apps.
Documentation and test cases are added.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/9085)
