It turned out that configuration options may affect the definition and
use of diverse stacks and how they relate to the underlying types.
For example, the configuration option 'no-rfc3779' results in a build
error around STACK_OF(IPAddressFamily) and related stacks.
Previously, STACK_OF definitions were located near the definition of
the underlying type, which are also affected by configuration options,
which made this easier to maintain. We relocate the new stack
definitions back to those locations for that reason.
We apply the same type of relocation in other header files as well, following
the general rule that it's better to use DEFINE_OR_DECLARE_STACK_OF after the
type it defines a stack for has been defined.
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/11655)
The ssltest docs were out of date because gneerate_ssl_tests now needs
a provider to be specified on the command line.
Fixes#11639
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/11659)
This macro is used to determine if certain pieces of code should
become part of the FIPS module or not. The old name was confusing.
Fixes#11538
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/11539)
With MANSUFFIX=A the statement '$$fn$(MANSUFFIX)' is reaplaces with
'$fnA' and left empty because the `fnA' variables is not recognized
within the shell.
With {} around fn it is then bocomes ${fn}A and works as expected.
While here, add the MANSUFFIX to the ECHO line so it is properly printed
during build.
Signed-off-by: Sebastian Andrzej Siewior <sebastian@breakpoint.cc>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/11643)
The test_ccs_change_cipher() test routine is used only when TLS 1.2
is enabled; to fix the strict-warnings build we should not try to
compile it when TLS 1.2 is disabled, either.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/11458)
A little spell checking.
Signed-off-by: Sebastian Andrzej Siewior <sebastian@breakpoint.cc>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/11644)
but in case of an error
CLA: trivial
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/11380)
The macro casts the glist parameter to char*
instead of (int *) like the documentation of the function suggest.
Also the function tls1_set_groups that is called from SSL_CTX_ctrl
takes an int * argument. This looks like a copy&paste error from
SSL_CTX_set1_groups_list function.
CLA: trivial
Signed-off-by: Arne Schwabe <arne@rfc2549.org>
Reviewed-by: Ben Kaduk <kaduk@mit.edu>
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/11614)
We want to fill 'othername' with the contents of 'oline' (256 bytes)
plus some additional text. We need to ensure that 'othername' is
large enough to contain this.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/11656)
CHANGES and NEWS were renamed into CHANGES.md and NEWS.md; this commit
updates the references inside CONTRIBUTING.md to fix broken links.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/11634)
The param builder and the params from text helpers also need to be modified
aware.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/11601)
$LABEL -> $label
Removed link to release notes, as we don't produce them for master.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/11617)
Reviewed-by: Ben Kaduk <kaduk@mit.edu>
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/11604)
Also make sure that all error messages in apps.c consistently begin upper-case.
Changed files: apps/lib/apps.c and apps/{req.c,s_client.c,s_server.c,x509.c}
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/4940)
Make use of new load_csr() in 'ca', 'req', and 'x509' app
Add '-inform' and '-certform' option to 'ca' app
Add 'desc' parameter to load_crl() function defined in apps/lib/apps.c
Allow 'desc' parameter to be NULL (gives option to suppress error output)
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/4940)
... and only *define* them in the source files that need them.
Use DEFINE_OR_DECLARE which is set appropriately for internal builds
and not non-deprecated builds.
Deprecate stack-of-block
Better documentation
Move some ASN1 struct typedefs to types.h
Update ParseC to handle this. Most of all, ParseC needed to be more
consistent. The handlers are "recursive", in so far that they are called
again and again until they terminate, which depends entirely on what the
"massager" returns. There's a comment at the beginning of ParseC that
explains how that works. {Richard Levtte}
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/10669)
The manpage is basically rewritten. Use consistent name/value
terminology. Use consistent phraseology to refer to section pointers
and lists of section pointers. Add more cross-references.
Also found a bunch of trivial style things in conf_api.c while
investigating how config works.
Reviewed-by: Nicola Tuveri <nic.tuv@gmail.com>
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/11431)
Introduced by rebasing
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/11177)
- Changed the generated FIPS signature file to be "fipsmodule.conf"
since it contains information about the FIPS module/file.
- Add -q option to fipsinstall command, to stop chatty verbose status
messages.
- Document env var OPENSSL_CONF_INCLUDE
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/11177)
The fips.so and legacy.so providers were not being installed because of
a typo in the makefile templates.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/11615)
This adds handling of the parameter "mandatory-digest" and responds
with an empty string, meaning that no digest may be used.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/11576)
EVP_DigestSignInit() and EVP_DigestVerifyInit() would detect if there
is no default digest when using legacy (EVP_PKEY_ASN1_METHOD)
implementations. However, it doesn't do that when provider side keys
are used.
Furthermore, because EVP_PKEY_get_default_digest_name() was used in
the portion of the code that uses the provider implementation, the
EVP_PKEY_ASN1_METHOD would be used if the key has one attached. This
is now changed to use evp_keymgmt_util_get_deflt_digest_name()
instead.
Finally, we make sure to detect if the provider implementation
supports the digest name parameters (default or mandatory), and
returns with error if not. This is what the legacy portion of the
code does.
Fixes#11571
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/11576)
evp_keymgmt_util_get_deflt_digest_name() is a refactor of the provider
side key part of EVP_PKEY_get_default_digest_name(), that takes
EVP_KEYMGMT and provider keydata pointers instead of an EVP_PKEY
pointer.
We also ensure that it uses SN_undef as the default name if the
provider implementation gave us an empty string, since this is what
EVP_PKEY_get_default_digest_name() responds when getting the digest
name via a EVP_PKEY_ASN1_METHOD ctrl call that returns NID_undef.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/11576)
Several MACs and one KDF are included in the FIPS provider with the property
"fips=yes" set but are not listed as being part of the OpenSSL validation.
This removes them from the FIPS provider.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/11602)
This fixes an assertion failure that can occur in the CMP code in the
event of a no-err build. The "improve_location_name" function assumed
that the fallback argument was always populated with something. However
in a no-err build this is not the case.
Reviewed-by: Nicola Tuveri <nic.tuv@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/11584)
In a similar way to the previous commit we also skip a fipsinstall test
if DSA has been disabled.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/11582)
One of the sub-tests in the fipsinstall test corrupts a DH test to
confirm that fipsinstall fails. However that is never noticed in a
no-dh build - so we just skip that test in a no-dh build.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/11582)
