Fixes#23400
The 3.1 FIPS provider no longer writes out the 'status indicator' by
default due to changes related to FIPS 140-3 requirements. For Backwards
compatability if the fipsinstall detects it is loading a 3.0.X FIPS
provider then it will save the 'status indicator' by default.
Disclaimer: Using a fipsinstall command line utility that is not supplied
with the FIPS provider tarball source is not recommended.
This PR deliberately does not attempt to exclude any additional options
that were added after 3.0.X. These additional options will be ignored by older
providers.
Reviewed-by: Paul Dale <ppzgs1@gmail.com>
Reviewed-by: Hugo Landau <hlandau@devever.net>
(Merged from https://github.com/openssl/openssl/pull/23689)
Similar to other KDFs, the input key should be 112 bits long.
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Paul Dale <ppzgs1@gmail.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/25529)
Document new command line options added in 3.4.0
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Paul Dale <ppzgs1@gmail.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/25546)
Document new command line options added in 3.2.0
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Paul Dale <ppzgs1@gmail.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/25546)
Document new command line options added in 3.1.0
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Paul Dale <ppzgs1@gmail.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/25546)
Documents when the command was added.
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Paul Dale <ppzgs1@gmail.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/25546)
This adds a FIPS indicator for KMAC key size.
Note that 112 bits keys are still smaller than the
sizes required to reach 128 bits for KMAC128 and
256 bits for KMAC256
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <ppzgs1@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/25049)
HMAC has been changed to use a FIPS indicator for its key check.
HKDF and Single Step use a salt rather than a key when using HMAC,
so we need a mechanism to bypass this check in HMAC.
A seperate 'internal' query table has been added to the FIPS provider
for MACS. Giving HMAC a seprate dispatch table allows KDF's to ignore
the key check. If a KDF requires the key check then it must do the
check itself. The normal MAC dipatch table is used if the user fetches
HMAC directly.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <ppzgs1@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/25049)
This reverts commit b00ea9a6a2a72f5ac7b38e82c9a7b6796972fc36.
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/25192)
FIPS KAS requires use of ECC CDH.
The EC 'B' and 'K' curves have a cofactor that is not 1, and this
MUST be multiplied by the private key when deriving the shared secret.
Reviewed-by: Paul Dale <ppzgs1@gmail.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/25139)
Since FIPS provider performs lower bound check by default from v3.0, the
default value for new configurable item will be one.
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/24120)
In FIPS 140-3, RSA Signing with X9.31 padding is not approved,
but verification is allowed for legacy purposes. An indicator has been added
for RSA signing with X9.31 padding.
A strict restriction on the size of the RSA modulus has been added
i.e. It must be 1024 + 256 * s (which is part of the ANSI X9.31 spec).
Added implementation comments to the X9.31 padding code
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <ppzgs1@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/24021)
This leaves 3DES with the FIPS query "FIPS=yes", which allows
Triple-DES to be used for Decryption by default.
Disallow CMAC using Triple-DES in FIPS.
This does not use a FIPS indicator.
Reviewed-by: Neil Horman <nhorman@openssl.org>
Reviewed-by: Paul Dale <ppzgs1@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/24960)
This is a FIPS 140-3 requirement.
This uses a FIP indicator if either the FIPS configurable "dsa_sign_disabled" is set to 0,
OR OSSL_SIGNATURE_PARAM_FIPS_SIGN_CHECK is set to 0 in the dsa signing context.
Reviewed-by: Neil Horman <nhorman@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/24799)
This option runs the self tests at installation time. It fails for the 3.1
module.
Also changed the default behaviour to that set by the -self_test_onload
option.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/19510)
Fixes#16260
If the user autoloads a fips module from a config file, then it will run the self tests early (before the self test callback is set),
and they may not get triggered again during the fipsinstall process.
In order for this to happen there must already be a valid fips config file.
As the main purpose of the application is to generate the fips config file, this case has just been documented.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/16475)
If -out is not specified, send output to stdout.
Fix documentation errors.
Remove "-out -" from an invocation.
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14623)
If a path is specified with the -module option it will use this path to load the library when the provider is activated,
instead of also having to set the environment variable OPENSSL_MODULES.
Added a platform specific opt_path_end() function that uses existing functionality used by opt_progname().
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/12761)
As the ERR_raise() is setup at this point returng a range of negative values for errors is not required.
This will need to be revisited if the code ever moves to running from the DEP.
Added a -config option to the fips install so that it can test if a fips module is loadable from configuration.
(The -verify option only uses the generated config, whereas -config uses the normal way of including the generated data via another config file).
Added more failure tests for the raised errors.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/12346)
Change default FIPS HMAC KEY from all-zero's
Use default FIPSKEY if not given on command line.
Make all -macopt in fipsinstall optional
Make all tests, except fipsinstall, use the default -macopt and
-mac_name flags.
Define and use FIPSDIR variable on VMS/MMS.
Also use SRCDIR/BLDDIR in SRCTOP/BLDTOP.
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/12235)
A small number of files contain references to the "OpenSSL license"
which has been deprecated and replaced by the "Apache License 2.0".
Amend the occurences.
Fixes#11649
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/11663)
- Changed the generated FIPS signature file to be "fipsmodule.conf"
since it contains information about the FIPS module/file.
- Add -q option to fipsinstall command, to stop chatty verbose status
messages.
- Document env var OPENSSL_CONF_INCLUDE
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/11177)
With the introduction of provider command line options which are applicable to
almost all of the command line tools, it seemed reasonable to make them all
generated. This simplifes the .gitignore and avoids having to keep two lists
in sync.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/11167)
