FIPS 140-2 IG D.9 has become FIPS 140-3 D.G (see "Mapping FIPS 140-2
IGs to FIPS 140-3" in the FIPS 140-3 IG).
The requirements w.r.t. RSA KATs have now been relaxed, meaning that
existing full-message RSA signature verification (which is performed
separately) is sufficient to meet KAT requirements for all RSA
usecases (KEM/Encrypt/Decrypt/Sign/Verify).
Dropping this KAT is very useful, because it is large/expensive on
module startup, but also because it enables in the future to block RSA
Encrypt/Decrypt operations with paddings other than OAEP, which are
legacy or deprecated by either current or draft algorithm transition
SP.
Reviewed-by: Paul Dale <ppzgs1@gmail.com>
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/25988)
FIPS provider correctly supports no-des build time option and doesn't
advertise DES related algorithms. However KAT test for DES is still
attempted to be executed and fails.
This prevents configuring FIPS provider without legacy behaviour as
defined in SP 800-131Arev2. Also see #25761 internal docs.
Fix `enable-fips no-des` build option, and add a daily checker for
"legacy-free" (as much as currently feasible) FIPS configuration.
Reviewed-by: Paul Dale <ppzgs1@gmail.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/25762)
Self tests no longer use the EVP_DigestSign/Verify API's.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/25570)
Cleanup + remove a few tests that are not required.
Reviewed-by: Paul Dale <ppzgs1@gmail.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/25222)
After reviewing the FIPS 140-3 IG self tests requirements the following
were added:
- TDES Decryption (Not sure why this was missing)
- DH changed to use ffdhe2048 instead of P,Q,G params.
- Signature code has been changed to use a msg rather than a digest as input.
(Since some digests dont provide the one shot API, the EVP_DigestSignFinal and
EVP_DigestVerifyFinal needed to be exposed to the FIPS provider). The
code is now shared between ED and the other key types.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/25217)
See FIPS 140-3 IG Section 10.3.A Part 11
Indicates ECDSA requires a sign and verify test.
Note 11 states that HashEdDSA is not required to be tested if PureEdDSA is tested.
Note 12 indicates that both ED25519 and X448 need to be tested.
Since ED uses the oneshot interface, additional API's needed to be exposed to the
FIPS provider using #ifdef FIPS_MODULE.
Changed ED25518 and ED448 to use fips=true in the FIPS provider.
Updated documentation for provider lists for EDDSA.
Reviewed-by: Paul Dale <ppzgs1@gmail.com>
Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22112)
This is a FIPS 140-3 requirement.
This uses a FIP indicator if either the FIPS configurable "dsa_sign_disabled" is set to 0,
OR OSSL_SIGNATURE_PARAM_FIPS_SIGN_CHECK is set to 0 in the dsa signing context.
Reviewed-by: Neil Horman <nhorman@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/24799)
Reviewed-by: Neil Horman <nhorman@openssl.org>
Release: yes
(cherry picked from commit 0ce7d1f355)
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/24034)
According to NIST SP 800-131Ar2 section 8, the length of the
key-derivation key shall be at least 112 bits.
Reviewed-by: Tom Cosgrove <tom.cosgrove@arm.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/23833)
NIST SP 800-132 [1] section 5.1 says "[t]he length of the
randomly-generated portion of the salt shall be at least
128 bits", which implies that the salt for PBKDF2 must be at least 16
bytes long (see also Appendix A.2.1).
The FIPS 140-3 IG [2] section 10.3.A requires that "the lengths and the
properties of the Password and Salt parameters, as well as the desired
length of the Master Key used in a CAST shall be among those supported
by the module in the approved mode."
As a consequence, the salt length in the self test must be at least 16
bytes long for FIPS 140-3 compliance. Switch the self test to use the
only test vector from RFC 6070 that uses salt that is long enough to
fulfil this requirement. Since RFC 6070 does not provide expected
results for PBKDF2 with HMAC-SHA256, use the output from [3], which was
generated with python cryptography, which was tested against the RFC
6070 vectors with HMAC-SHA1.
[1]: https://doi.org/10.6028/NIST.SP.800-132
[2]: https://csrc.nist.gov/CSRC/media/Projects/cryptographic-module-validation-program/documents/fips%20140-3/FIPS%20140-3%20IG.pdf
[3]: https://github.com/brycx/Test-Vector-Generation/blob/master/PBKDF2/pbkdf2-hmac-sha2-test-vectors.md
Signed-off-by: Clemens Lang <cllang@redhat.com>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20429)
Co-authored-by: Randall Steck <rsteck@thinqsoft.com>
Co-authored-by: Mark J. Minnoch <mark@keypair.us>
Co-authored-by: Steve Weymann <steve@keypair.us>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/19510)
Fixes#19488
Use the correct OSSL_PKEY_PARAM_RSA CRT names fior the self tests.
The invalid names cause CRT parameters to be silently ignored.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19501)
The power up known answer test for the TLS 1.3 KDF does just the first step
to derive the "client_early_traffic_secret" using the two modes of the KDF.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/16203)
This is a request from the lab that changes the AES_GCM test back to perform both a encrypt and
decrypt. (This makes no logical sense since this is not an inverse cipher).
I have left the AES_ECB decrypt test in (although it may not be needed)
since it is actually testing the inverse cipher case.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15844)
Fixes#14807
Compliance with IG 9.4 requires that an inverse cipher function be
tested if one is implemented. Just running AES_GCM encrypt/decrypt does not meet this
requirement (Since only ECB, CBC, XTS, KW, KWP support the inverse
function during decryption mode).
Added a mode to the cipher test so that the AES_GCM only does an encrypt
and AES_ECB only does a decrypt. TDES still does both.
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14825)
This partially reverts commit 270a5ce1d9.
This also slightly modifies the way diverse parameters in are
specified in providers/fips/self_test_data.inc for better consistency.
Fixes#14027
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14035)
Handling of parameter OSSL_KDF_PARAM_SSHKDF_TYPE mixed integer and string
parameters. This caused endianness problems on big-endian machines. As a
result, it is not possible to pass FIPS tests since the parameter was stored
with an integer value but read via a cast to char pointer. While this works
on little endian machines, big endian s390 read the most significant bits
instead of the least significant (as done by, e.g., x86). Change the
parameter to char array and fix the usages.
Signed-off-by: Juergen Christ <jchrist@linux.ibm.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Patrick Steuer <patrick.steuer@de.ibm.com>
(Merged from https://github.com/openssl/openssl/pull/13781)
The configuration option 'no-rsa' was dropped with OpenSSL 1.1.0, so
this is simply a cleanup of the remains.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/13700)
Various sections of code assumed that at least one of dh or ec would be
available. We also now also need to handle cases where a provider has
a key exchange algorithm and TLS-GROUP that we don't know about.
Fixes#13536
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/13549)
SP800-56br2 requires seperate KAT's (fips self tests) to be tested for both encryption and decryption
using the RSA primitive (i.e. no padding). This is specified in FIPS140-2 IG D.9
A copy of the methods EVP_PKEY_encrypt_init(), EVP_PKEY_encrypt(), EVP_PKEY_decrypt_init(), EVP_PKEY_decrypt()
are now in the fips module.
Removed the #ifdef FIPS_MODULE in evp_pkey_ctx_free_old_ops().
Added corruption test
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/12835)
We rename these function to EVP_PKEY_CTX_get_group_name and
EVP_PKEY_CTX_set_group_name so that they can be used for other algorithms
other than EC.
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/11914)
A small number of files contain references to the "OpenSSL license"
which has been deprecated and replaced by the "Apache License 2.0".
Amend the occurences.
Fixes#11649
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/11663)
Don't attempt to self-test DES in the FIPS provider if we have been built
without FIPS support.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/11034)
Added an API to optionally set a self test callback.
The callback has the following 2 purposes
(1) Output information about the KAT tests.
(2) Allow the ability to corrupt one of the KAT's
The fipsinstall program uses the API.
Some KATS are not included in this PR since the required functionality did not yet exist in the provider.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/10374)
