From b7140b0604bdfaa034452d97648a9c23a97568e4 Mon Sep 17 00:00:00 2001 From: Shane Lontis Date: Sun, 28 Mar 2021 17:22:40 +1000 Subject: [PATCH] Add migration guide for 3.0 Reviewed-by: Paul Dale Reviewed-by: Matt Caswell (Merged from https://github.com/openssl/openssl/pull/14710) --- CHANGES.md | 719 ++-------- NEWS.md | 1 + README-FIPS.md | 407 +----- doc/build.info | 12 + doc/man3/DH_size.pod | 16 +- doc/man3/PEM_read_CMS.pod | 2 +- doc/man3/PEM_read_bio_PrivateKey.pod | 2 +- doc/man7/OSSL_PROVIDER-legacy.pod | 7 +- doc/man7/crypto.pod | 3 +- doc/man7/fips_module.pod | 443 +++++++ doc/man7/migration_guide.pod | 1804 ++++++++++++++++++++++++++ 11 files changed, 2351 insertions(+), 1065 deletions(-) create mode 100644 doc/man7/fips_module.pod create mode 100644 doc/man7/migration_guide.pod diff --git a/CHANGES.md b/CHANGES.md index 12f4c820d9..b53216512f 100644 --- a/CHANGES.md +++ b/CHANGES.md @@ -21,6 +21,13 @@ OpenSSL Releases OpenSSL 3.0 ----------- +For OpenSSL 3.0 a [Migration guide][] has been added, so the CHANGES entries +listed here are only a brief description. +The migration guide contains more detailed information related to new features, +breaking changes, and mappings for the large list of deprecated functions. + +[Migration guide]: https://github.com/openssl/openssl/tree/master/doc/man7/migration_guide.pod + ### Changes between 1.1.1 and 3.0 [xx XXX xxxx] * The signatures of the functions to get and set options on SSL and @@ -41,53 +48,21 @@ OpenSSL 3.0 * Rich Salz * * OpenSSL includes a cryptographic module that is intended to be FIPS 140-2 - validated. The module is implemented as an OpenSSL provider, the so-called - FIPS provider. A list of all changes related to the FIPS provider would go - beyond the scope of this CHANGES file, please consult the README-FIPS and + validated. Please consult the README-FIPS and README-PROVIDERS files, as well as the migration guide. - The FIPS provider is disabled by default and needs to be enabled explicitly - at configuration time using the `enable-fips` option. If it is enabled, - the FIPS provider gets built and installed in addition to the default and - the legacy provider. No separate installation procedure is necessary. - There is however a dedicated `install_fips` make target, which serves the - special purpose of installing only the FIPS provider into an existing - OpenSSL installation. - *OpenSSL team members and many third party contributors* * For the key types DH and DHX the allowed settable parameters are now different. - Previously (in 1.1.1) these conflicting parameters were allowed, but will now - result in errors. See EVP_PKEY-DH(7) for further details. This affects the - behaviour of openssl-genpkey(1) for DH parameter generation. *Shane Lontis* * The openssl commands that read keys, certificates, and CRLs now - automatically detect the PEM or DER format of the input files so it is not - necessary to explicitly specify the input format anymore. However if the - input format option is used the specified format will be required. + automatically detect the PEM or DER format of the input files. *David von Oheimb, Richard Levitte, and Tomáš Mráz* - * Added enhanced PKCS#12 APIs which accept a library context `OSSL_LIB_CTX` - and (where relevant) a property query. Other APIs which handle PKCS#7 and - PKCS#8 objects have also been enhanced where required. This includes: - - PKCS12_add_key_ex(), PKCS12_add_safe_ex(), PKCS12_add_safes_ex(), - PKCS12_create_ex(), PKCS12_decrypt_skey_ex(), PKCS12_init_ex(), - PKCS12_item_decrypt_d2i_ex(), PKCS12_item_i2d_encrypt_ex(), - PKCS12_key_gen_asc_ex(), PKCS12_key_gen_uni_ex(), PKCS12_key_gen_utf8_ex(), - PKCS12_pack_p7encdata_ex(), PKCS12_pbe_crypt_ex(), PKCS12_PBE_keyivgen_ex(), - PKCS12_SAFEBAG_create_pkcs8_encrypt_ex(), PKCS5_pbe2_set_iv_ex(), - PKCS5_pbe_set0_algor_ex(), PKCS5_pbe_set_ex(), PKCS5_pbkdf2_set_ex(), - PKCS5_v2_PBE_keyivgen_ex(), PKCS5_v2_scrypt_keyivgen_ex(), - PKCS8_decrypt_ex(), PKCS8_encrypt_ex(), PKCS8_set0_pbe_ex(). - - As part of this change the EVP_PBE_xxx APIs can also accept a library - context and property query and will call an extended version of the key/IV - derivation function which supports these parameters. This includes - EVP_PBE_CipherInit_ex(), EVP_PBE_find_ex() and EVP_PBE_scrypt_ex(). + * Added enhanced PKCS#12 APIs which accept a library context. *Jon Spillett* @@ -95,17 +70,12 @@ OpenSSL 3.0 *Matt Caswell* - * Added support for Kernel TLS (KTLS). In order to use KTLS, support for it - must be compiled in using the "enable-ktls" compile time option. It must - also be enabled at run time using the SSL_OP_ENABLE_KTLS option. + * Added support for Kernel TLS (KTLS). *Boris Pismenny, John Baldwin and Andrew Gallatin* * Support for RFC 5746 secure renegotiation is now required by default for - SSL or TLS connections to succeed. Applications that require the ability - to connect to legacy peers will need to explicitly set - SSL_OP_LEGACY_SERVER_CONNECT. Accordingly, SSL_OP_LEGACY_SERVER_CONNECT - is no longer set as part of SSL_OP_ALL. + SSL or TLS connections to succeed. *Benjamin Kaduk* @@ -119,47 +89,29 @@ OpenSSL 3.0 *David von Oheimb* * The error return values from some control calls (ctrl) have changed. - One significant change is that controls which used to return -2 for - invalid inputs, now return -1 indicating a generic error condition instead. *Paul Dale* * A public key check is now performed during EVP_PKEY_derive_set_peer(). - Previously DH was internally doing this during EVP_PKEY_derive(). - To disable this check use EVP_PKEY_derive_set_peer_ex(dh, peer, 0). This - may mean that an error can occur in EVP_PKEY_derive_set_peer() rather than - during EVP_PKEY_derive(). *Shane Lontis* * The EVP_PKEY_CTRL_PKCS7_ENCRYPT, EVP_PKEY_CTRL_PKCS7_DECRYPT, EVP_PKEY_CTRL_PKCS7_SIGN, EVP_PKEY_CTRL_CMS_ENCRYPT, EVP_PKEY_CTRL_CMS_DECRYPT, and EVP_PKEY_CTRL_CMS_SIGN control operations - are deprecated. They are not invoked by the OpenSSL library anymore and - are replaced by direct checks of the key operation against the key type - when the operation is initialized. + are deprecated. *Tomáš Mráz* * The EVP_PKEY_public_check() and EVP_PKEY_param_check() functions now work for - more key types including RSA, DSA, ED25519, X25519, ED448 and X448. - Previously (in 1.1.1) they would return -2. For key types that do not have - parameters then EVP_PKEY_param_check() will always return 1. + more key types. * The output from the command line applications may have minor - changes. These are primarily changes in capitalisation and white - space. However, in some cases, there are additional differences. - For example, the DH parameters output from `dhparam` now lists 'P', - 'Q', 'G' and 'pcounter' instead of 'prime', 'generator', 'subgroup - order' and 'counter' respectively. + changes. *Paul Dale* - * The output from numerous "printing" functions such as X509_signature_print(), - X509_print_ex(), X509_CRL_print_ex(), and other similar functions has been - amended such that there may be cosmetic differences between the output - observed in 1.1.1 and 3.0. This also applies to the "-text" output from the - x509 and crl applications. + * The output from numerous "printing" may have minor changes. *David von Oheimb* @@ -194,26 +146,13 @@ OpenSSL 3.0 *David von Oheimb* - * The implementation of the EVP ciphers CAST5-ECB, CAST5-CBC, CAST5-OFB, - CAST5-CFB, BF-ECB, BF-CBC, BF-OFB, BF-CFB, IDEA-ECB, IDEC-CBC, IDEA-OFB, - IDEA-CFB, SEED-ECB, SEED-CBC, SEED-OFB, SEED-CFB, RC2-ECB, RC2-CBC, - RC2-40-CBC, RC2-64-CBC, RC2-OFB, RC2-CFB, RC4, RC4-40, RC4-HMAC-MD5, RC5-ECB, - RC5-CBC, RC5-OFB, RC5-CFB, DESX-CBC, DES-ECB, DES-CBC, DES-OFB, DES-CFB, - DES-CFB1 and DES-CFB8 have been moved to the legacy provider. Applications - using the EVP APIs to access these ciphers should instead use more modern - ciphers. If that is not possible then these applications should ensure that - the legacy provider has been loaded. This can be achieved either - programmatically or via configuration. See the provider(7) man page for - further details. + * The implementation of older EVP ciphers related to CAST, IDEA, SEED, RC2, RC4, + RC5, DESX and DES have been moved to the legacy provider. *Matt Caswell* * The implementation of the EVP digests MD2, MD4, MDC2, WHIRLPOOL and - RIPEMD-160 have been moved to the legacy provider. Applications using the - EVP APIs to access these digests should instead use more modern digests. If - that is not possible then these applications should ensure that the legacy - provider has been loaded. This can be achieved either programmatically or via - configuration. See the provider(7) man page for further details. + RIPEMD-160 have been moved to the legacy provider. *Matt Caswell* @@ -225,60 +164,28 @@ OpenSSL 3.0 * The deprecated functions EVP_PKEY_get0_RSA(), EVP_PKEY_get0_DSA(), EVP_PKEY_get0_EC_KEY(), EVP_PKEY_get0_DH(), EVP_PKEY_get0_hmac(), EVP_PKEY_get0_poly1305() and EVP_PKEY_get0_siphash() as - well as the similarly named "get1" functions behave slightly differently in - OpenSSL 3.0. Previously they returned a pointer to the low-level key used - internally by libcrypto. From OpenSSL 3.0 this key may now be held in a - provider. Calling these functions will only return a handle on the internal - key where the EVP_PKEY was constructed using this key in the first place, for - example using a function or macro such as EVP_PKEY_assign_RSA(), - EVP_PKEY_set1_RSA(), etc. Where the EVP_PKEY holds a provider managed key, - then these functions now return a cached copy of the key. Changes to - the internal provider key that take place after the first time the cached key - is accessed will not be reflected back in the cached copy. Similarly any - changes made to the cached copy by application code will not be reflected - back in the internal provider key. - - For the above reasons the keys returned from these functions should typically - be treated as read-only. To emphasise this the value returned from - EVP_PKEY_get0_RSA(), EVP_PKEY_get0_DSA(), - EVP_PKEY_get0_EC_KEY() and EVP_PKEY_get0_DH() has been made const. This may - break some existing code. Applications broken by this change should be - modified. The preferred solution is to refactor the code to avoid the use of - these deprecated functions. Failing this the code should be modified to use a - const pointer instead. The EVP_PKEY_get1_RSA(), EVP_PKEY_get1_DSA(), - EVP_PKEY_get1_EC_KEY() and EVP_PKEY_get1_DH() functions continue to return a - non-const pointer to enable them to be "freed". However they should also be - treated as read-only. + well as the similarly named "get1" functions behave differently in + OpenSSL 3.0. *Matt Caswell* * A number of functions handling low-level keys or engines were deprecated including EVP_PKEY_set1_engine(), EVP_PKEY_get0_engine(), EVP_PKEY_assign(), EVP_PKEY_get0(), EVP_PKEY_get0_hmac(), EVP_PKEY_get0_poly1305() and - EVP_PKEY_get0_siphash(). Applications using engines should instead use - providers. Applications getting or setting low-level keys in an EVP_PKEY - should instead use the OSSL_ENCODER or OSSL_DECODER APIs, or alternatively - use EVP_PKEY_fromdata() or EVP_PKEY_get_params(). + EVP_PKEY_get0_siphash(). *Matt Caswell* * Deprecated obsolete EVP_PKEY_CTX_get0_dh_kdf_ukm() and - EVP_PKEY_CTX_get0_ecdh_kdf_ukm() functions. They are not needed - and require returning octet ptr parameters from providers that - would like to support them which complicates provider implementations. + EVP_PKEY_CTX_get0_ecdh_kdf_ukm() functions. *Tomáš Mráz* - * The RAND_METHOD APIs have been deprecated. The functions deprecated are: - RAND_OpenSSL(), RAND_get_rand_method(), RAND_set_rand_engine() and - RAND_set_rand_method(). Provider based random number generators should - be used instead via EVP_RAND(3). + * The RAND_METHOD APIs have been deprecated. *Paul Dale* - * The SRP APIs have been deprecated. The old APIs do not work via providers, - and there is no EVP interface to them. Unfortunately there is no replacement - for these APIs at this time. + * The SRP APIs have been deprecated. *Matt Caswell* @@ -288,20 +195,12 @@ OpenSSL 3.0 *Paul Dale* - * The default algorithms for pkcs12 creation with the PKCS12_create() function - were changed to more modern PBKDF2 and AES based algorithms. The default - MAC iteration count was changed to PKCS12_DEFAULT_ITER to make it equal - with the password-based encryption iteration count. The default digest - algorithm for the MAC computation was changed to SHA-256. The pkcs12 - application now supports -legacy option that restores the previous - default algorithms to support interoperability with legacy systems. + * pkcs12 now uses defaults of PBKDF2, AES and SHA-256, with a MAC iteration + count of PKCS12_DEFAULT_ITER. *Tomáš Mráz and Sahana Prasad* - * The openssl speed command does not use low-level API calls anymore. This - implies some of the performance numbers might not be fully comparable - with the previous releases due to higher overhead. This applies - particularly to measuring performance on smaller data chunks. + * The openssl speed command does not use low-level API calls anymore. *Tomáš Mráz* @@ -311,13 +210,6 @@ OpenSSL 3.0 *Ilya Albrekht, Sergey Kirillov, Andrey Matyukov (Intel Corp)* * Combining the Configure options no-ec and no-dh no longer disables TLSv1.3. - Typically if OpenSSL has no EC or DH algorithms then it cannot support - connections with TLSv1.3. However OpenSSL now supports "pluggable" groups - through providers. Therefore third party providers may supply group - implementations even where there are no built-in ones. Attempting to create - TLS connections in such a build without also disabling TLSv1.3 at run time or - using third party provider groups may result in handshake failures. TLSv1.3 - can be disabled at compile time using the "no-tls1_3" Configure option. *Matt Caswell* @@ -329,14 +221,10 @@ OpenSSL 3.0 *Matt Caswell, Nicola Tuveri* * The undocumented function X509_certificate_type() has been deprecated; - applications can use X509_get0_pubkey() and X509_get0_signature() to - get the same information. *Rich Salz* - * Deprecated the obsolete BN_pseudo_rand() and BN_pseudo_rand_range() - functions. They are identical to BN_rand() and BN_rand_range() - respectively. + * Deprecated the obsolete BN_pseudo_rand() and BN_pseudo_rand_range(). *Tomáš Mráz* @@ -347,65 +235,38 @@ OpenSSL 3.0 *Rich Salz* - * Deprecated the obsolete X9.31 RSA key generation related functions - BN_X931_generate_Xpq(), BN_X931_derive_prime_ex(), and - BN_X931_generate_prime_ex(). + * Deprecated the obsolete X9.31 RSA key generation related functions. *Tomáš Mráz* * The default key generation method for the regular 2-prime RSA keys was - changed to the FIPS 186-4 B.3.6 method (Generation of Probable Primes with - Conditions Based on Auxiliary Probable Primes). This method is slower - than the original method. + changed to the FIPS 186-4 B.3.6 method. *Shane Lontis* * Deprecated the BN_is_prime_ex() and BN_is_prime_fasttest_ex() functions. - They are replaced with the BN_check_prime() function that avoids possible - misuse and always uses at least 64 rounds of the Miller-Rabin - primality test. At least 64 rounds of the Miller-Rabin test are now also - used for all prime generation, including RSA key generation. - This increases key generation time, especially for larger keys. *Kurt Roeckx* - * Deprecated EVP_MD_CTX_set_update_fn() and EVP_MD_CTX_update_fn() - as they are not useful with non-deprecated functions. + * Deprecated EVP_MD_CTX_set_update_fn() and EVP_MD_CTX_update_fn(). *Rich Salz* - * Deprecated the type OCSP_REQ_CTX and the functions OCSP_REQ_CTX_new(), - OCSP_REQ_CTX_free(), OCSP_REQ_CTX_http(), OCSP_REQ_CTX_add1_header(), - OCSP_REQ_CTX_i2d() and its special form OCSP_REQ_CTX_set1_req(), - OCSP_REQ_CTX_nbio(), - OCSP_REQ_CTX_nbio_d2i() and its special form OCSP_sendreq_nbio(), - OCSP_REQ_CTX_get0_mem_bio() and OCSP_set_max_response_length(). These - were used to collect all necessary data to form a HTTP request, and to - perform the HTTP transfer with that request. With OpenSSL 3.0, the - type is OSSL_HTTP_REQ_CTX, and the deprecated functions are replaced - with OSSL_HTTP_REQ_CTX_new(), OSSL_HTTP_REQ_CTX_free(), - OSSL_HTTP_REQ_CTX_set_request_line(), OSSL_HTTP_REQ_CTX_add1_header(), - OSSL_HTTP_REQ_CTX_set1_req(), - OSSL_HTTP_REQ_CTX_nbio(), OSSL_HTTP_REQ_CTX_nbio_d2i(), - OSSL_HTTP_REQ_CTX_get0_mem_bio(), and - OSSL_HTTP_REQ_CTX_set_max_response_length(). + * Deprecated the type OCSP_REQ_CTX and the functions OCSP_REQ_CTX_*() and + replaced with OSSL_HTTP_REQ_CTX and the functions OSSL_HTTP_REQ_CTX_*(). *Rich Salz, Richard Levitte, and David von Oheimb* - * Deprecated `X509_http_nbio()` and `X509_CRL_http_nbio()`, - which are superseded by `X509_load_http()` and `X509_CRL_load_http()`. + * Deprecated `X509_http_nbio()` and `X509_CRL_http_nbio()`. *David von Oheimb* - * Deprecated `OCSP_parse_url()`, which is replaced with `OSSL_HTTP_parse_url`. + * Deprecated `OCSP_parse_url()`. *David von Oheimb* * Validation of SM2 keys has been separated from the validation of regular EC - keys, allowing to improve the SM2 validation process to reject loaded private - keys that are not conforming to the SM2 ISO standard. - In particular, a private scalar `k` outside the range `1 <= k < n-1` is now - correctly rejected. + keys. *Nicola Tuveri* @@ -432,79 +293,18 @@ OpenSSL 3.0 *David von Oheimb* - * All of the low-level EC_KEY functions have been deprecated including: - - EC_KEY_OpenSSL, EC_KEY_get_default_method, EC_KEY_set_default_method, - EC_KEY_get_method, EC_KEY_set_method, EC_KEY_new_method - EC_KEY_METHOD_new, EC_KEY_METHOD_free, EC_KEY_METHOD_set_init, - EC_KEY_METHOD_set_keygen, EC_KEY_METHOD_set_compute_key, - EC_KEY_METHOD_set_sign, EC_KEY_METHOD_set_verify, - EC_KEY_METHOD_get_init, EC_KEY_METHOD_get_keygen, - EC_KEY_METHOD_get_compute_key, EC_KEY_METHOD_get_sign, - EC_KEY_METHOD_get_verify, - EC_KEY_new_ex, EC_KEY_new, EC_KEY_get_flags, EC_KEY_set_flags, - EC_KEY_clear_flags, EC_KEY_decoded_from_explicit_params, - EC_KEY_new_by_curve_name_ex, EC_KEY_new_by_curve_name, EC_KEY_free, - EC_KEY_copy, EC_KEY_dup, EC_KEY_up_ref, EC_KEY_get0_engine, - EC_KEY_get0_group, EC_KEY_set_group, EC_KEY_get0_private_key, - EC_KEY_set_private_key, EC_KEY_get0_public_key, EC_KEY_set_public_key, - EC_KEY_get_enc_flags, EC_KEY_set_enc_flags, EC_KEY_get_conv_form, - EC_KEY_set_conv_form, EC_KEY_set_ex_data, EC_KEY_get_ex_data, - EC_KEY_set_asn1_flag, EC_KEY_generate_key, EC_KEY_check_key, EC_KEY_can_sign, - EC_KEY_set_public_key_affine_coordinates, EC_KEY_key2buf, EC_KEY_oct2key, - EC_KEY_oct2priv, EC_KEY_priv2oct and EC_KEY_priv2buf. - Applications that need to implement an EC_KEY_METHOD need to consider - implementation of the functionality in a special provider. - For replacement of the functions manipulating the EC_KEY objects - see the L manual page. - A simple way of generating EC keys is L. - - Additionally functions that read and write EC_KEY objects such as - o2i_ECPublicKey, i2o_ECPublicKey, ECParameters_print_fp, EC_KEY_print_fp, - d2i_ECPKParameters, d2i_ECParameters, d2i_ECPrivateKey, d2i_ECPrivateKey_bio, - d2i_ECPrivateKey_fp, d2i_EC_PUBKEY, d2i_EC_PUBKEY_bio, d2i_EC_PUBKEY_fp, - i2d_ECPKParameters, i2d_ECParameters, i2d_ECPrivateKey, i2d_ECPrivateKey_bio, - i2d_ECPrivateKey_fp, i2d_EC_PUBKEY, i2d_EC_PUBKEY_bio and i2d_EC_PUBKEY_fp - have also been deprecated. Applications should instead use the - OSSL_DECODER and OSSL_ENCODER APIs to read and write EC files. - - Finally functions that assign or obtain EC_KEY objects from an EVP_PKEY such as - EVP_PKEY_assign_EC_KEY, EVP_PKEY_get0_EC_KEY, EVP_PKEY_get1_EC_KEY and - EVP_PKEY_set1_EC_KEY are also deprecated. Applications should instead either - read or write an EVP_PKEY directly using the OSSL_DECODER and OSSL_ENCODER - APIs. Or load an EVP_PKEY directly from EC data using EVP_PKEY_fromdata(). + * All of the low level EC_KEY functions have been deprecated. *Shane Lontis, Paul Dale, Richard Levitte, and Tomáš Mráz* * Deprecated all the libcrypto and libssl error string loading - functions: ERR_load_ASN1_strings(), ERR_load_ASYNC_strings(), - ERR_load_BIO_strings(), ERR_load_BN_strings(), ERR_load_BUF_strings(), - ERR_load_CMS_strings(), ERR_load_COMP_strings(), ERR_load_CONF_strings(), - ERR_load_CRYPTO_strings(), ERR_load_CT_strings(), ERR_load_DH_strings(), - ERR_load_DSA_strings(), ERR_load_EC_strings(), ERR_load_ENGINE_strings(), - ERR_load_ERR_strings(), ERR_load_EVP_strings(), ERR_load_KDF_strings(), - ERR_load_OBJ_strings(), ERR_load_OCSP_strings(), ERR_load_PEM_strings(), - ERR_load_PKCS12_strings(), ERR_load_PKCS7_strings(), ERR_load_RAND_strings(), - ERR_load_RSA_strings(), ERR_load_OSSL_STORE_strings(), ERR_load_TS_strings(), - ERR_load_UI_strings(), ERR_load_X509_strings(), ERR_load_X509V3_strings(). - - Calling these functions is not necessary since OpenSSL 1.1.0, as OpenSSL - now loads error strings automatically. + functions. *Richard Levitte* * The functions SSL_CTX_set_tmp_dh_callback and SSL_set_tmp_dh_callback, as well as the macros SSL_CTX_set_tmp_dh() and SSL_set_tmp_dh() have been - deprecated. These are used to set the Diffie-Hellman (DH) parameters that - are to be used by servers requiring ephemeral DH keys. Instead applications - should consider using the built-in DH parameters that are available by - calling SSL_CTX_set_dh_auto() or SSL_set_dh_auto(). If custom parameters are - necessary then applications can use the alternative functions - SSL_CTX_set0_tmp_dh_pkey() and SSL_set0_tmp_dh_pkey(). There is no direct - replacement for the "callback" functions. The callback was originally useful - in order to have different parameters for export and non-export ciphersuites. - Export ciphersuites are no longer supported by OpenSSL. Use of the callback - functions should be replaced by one of the other methods described above. + deprecated. *Matt Caswell* @@ -518,32 +318,17 @@ OpenSSL 3.0 *Rich Salz* * Add support for AES Key Wrap inverse ciphers to the EVP layer. - The algorithms are: - "AES-128-WRAP-INV", "AES-192-WRAP-INV", "AES-256-WRAP-INV", - "AES-128-WRAP-PAD-INV", "AES-192-WRAP-PAD-INV" and "AES-256-WRAP-PAD-INV". - The inverse ciphers use AES decryption for wrapping, and - AES encryption for unwrapping. *Shane Lontis* * Deprecated EVP_PKEY_set1_tls_encodedpoint() and - EVP_PKEY_get1_tls_encodedpoint(). These functions were previously used by - libssl to set or get an encoded public key in/from an EVP_PKEY object. With - OpenSSL 3.0 these are replaced by the more generic functions - EVP_PKEY_set1_encoded_public_key() and EVP_PKEY_get1_encoded_public_key(). - The old versions have been converted to deprecated macros that just call the - new functions. + EVP_PKEY_get1_tls_encodedpoint(). *Matt Caswell* * The security callback, which can be customised by application code, supports - the security operation SSL_SECOP_TMP_DH. This is defined to take an EVP_PKEY - in the "other" parameter. In most places this is what is passed. All these - places occur server side. However there was one client side call of this - security operation and it passed a DH object instead. This is incorrect - according to the definition of SSL_SECOP_TMP_DH, and is inconsistent with all - of the other locations. Therefore this client side call has been changed to - pass an EVP_PKEY instead. + the security operation SSL_SECOP_TMP_DH. One location of the "other" parameter + was incorrectly passing a DH object. It now passed an EVP_PKEY in all cases. *Matt Caswell* @@ -558,11 +343,7 @@ OpenSSL 3.0 *Paul Dale* - * Removed EVP_PKEY_set_alias_type(). This function was previously - needed as a workaround to recognise SM2 keys. With OpenSSL 3.0, this key - type is internally recognised so the workaround is no longer needed. - - This is a breaking change from previous OpenSSL versions. + * Removed EVP_PKEY_set_alias_type(). *Richard Levitte* @@ -579,18 +360,6 @@ OpenSSL 3.0 * Remove the RAND_DRBG API - The RAND_DRBG API did not fit well into the new provider concept as - implemented by EVP_RAND and EVP_RAND_CTX. The main reason is that the - RAND_DRBG API is a mixture of 'front end' and 'back end' API calls - and some of its API calls are rather low-level. This holds in particular - for the callback mechanism (`RAND_DRBG_set_callbacks()`). - - Adding a compatibility layer to continue supporting the RAND_DRBG API as - a legacy API for a regular deprecation period turned out to come at the - price of complicating the new provider API unnecessarily. Since the - RAND_DRBG API exists only since version 1.1.1, it was decided by the OMC - to drop it entirely. - *Paul Dale and Matthias St. Pierre* * Allow `SSL_set1_host()` and `SSL_add1_host()` to take IP literal addresses @@ -645,25 +414,6 @@ OpenSSL 3.0 other libraries can use to form a separate context within which libcrypto operations are performed. - There are two ways this can be used: - - - Directly, by passing a library context to functions that take - such an argument, such as `EVP_CIPHER_fetch` and similar algorithm - fetching functions. - - Indirectly, by creating a new library context and then assigning - it as the new default, with `OSSL_LIB_CTX_set0_default`. - - All public OpenSSL functions that take an `OSSL_LIB_CTX` pointer, - apart from the functions directly related to `OSSL_LIB_CTX`, accept - NULL to indicate that the default library context should be used. - - Library code that changes the default library context using - `OSSL_LIB_CTX_set0_default` should take care to restore it with a - second call before returning to the caller. - - _(Note: the library context was initially called `OPENSSL_CTX` and - renamed to `OSSL_LIB_CTX` in version 3.0.0 alpha7.)_ - *Richard Levitte* * Handshake now fails if Extended Master Secret extension is dropped @@ -671,36 +421,25 @@ OpenSSL 3.0 *Tomáš Mráz* - * Dropped interactive mode from the `openssl` program. From now on, - running it without arguments is equivalent to `openssl help`. + * Dropped interactive mode from the `openssl` program. *Richard Levitte* - * Deprecated `EVP_PKEY_cmp()` and `EVP_PKEY_cmp_parameters()` since their - return values were confusing: Unlike other `_cmp()` functions - they do not return 0 when their arguments are equal. - The new replacement functions `EVP_PKEY_eq()` and `EVP_PKEY_parameters_eq()` - should be used. + * Deprecated `EVP_PKEY_cmp()` and `EVP_PKEY_cmp_parameters()`. *David von Oheimb and Shane Lontis* - * Deprecated `EC_METHOD_get_field_type()`. Applications should switch to - `EC_GROUP_get_field_type()`. + * Deprecated `EC_METHOD_get_field_type()`. *Billy Bob Brumley* * Deprecated EC_GFp_simple_method(), EC_GFp_mont_method(), EC_GF2m_simple_method(), EC_GFp_nist_method(), EC_GFp_nistp224_method() EC_GFp_nistp256_method(), and EC_GFp_nistp521_method(). - Applications should rely on the library automatically assigning a suitable - EC_METHOD internally upon EC_GROUP construction. *Billy Bob Brumley* * Deprecated EC_GROUP_new(), EC_GROUP_method_of(), and EC_POINT_method_of(). - EC_METHOD is now an internal-only concept and a suitable EC_METHOD is - assigned internally without application intervention. - Users of EC_GROUP_new() should switch to a different suitable constructor. *Billy Bob Brumley* @@ -714,48 +453,33 @@ OpenSSL 3.0 *Antonio Iacono* * Added the AuthEnvelopedData content type structure (RFC 5083) with AES-GCM - parameter (RFC 5084) for the Cryptographic Message Syntax (CMS). Its purpose - is to support encryption and decryption of a digital envelope that is both - authenticated and encrypted using AES GCM mode. + parameter (RFC 5084) for the Cryptographic Message Syntax (CMS). *Jakub Zelenka* - * Deprecated EC_POINT_make_affine() and EC_POINTs_make_affine(). These - functions are not widely used and now OpenSSL automatically perform this - conversion when needed. + * Deprecated EC_POINT_make_affine() and EC_POINTs_make_affine(). *Billy Bob Brumley* * Deprecated EC_GROUP_precompute_mult(), EC_GROUP_have_precompute_mult(), and - EC_KEY_precompute_mult(). These functions are not widely used and - applications should instead switch to named curves which OpenSSL has - hardcoded lookup tables for. + EC_KEY_precompute_mult(). *Billy Bob Brumley* - * Deprecated EC_POINTs_mul(). This function is not widely used and applications - should instead use the L function. + * Deprecated EC_POINTs_mul(). *Billy Bob Brumley* - * Removed FIPS_mode() and FIPS_mode_set(). These functions are legacy API's - that are not applicable to the new provider model. Applications should - instead use EVP_default_properties_is_fips_enabled() and - EVP_default_properties_enable_fips(). + * Removed FIPS_mode() and FIPS_mode_set(). *Shane Lontis* - * The SSL option SSL_OP_IGNORE_UNEXPECTED_EOF is introduced. If that option - is set, an unexpected EOF is ignored, it pretends a close notify was received - instead and so the returned error becomes SSL_ERROR_ZERO_RETURN. + * The SSL option SSL_OP_IGNORE_UNEXPECTED_EOF is introduced. *Dmitry Belyavskiy* * Deprecated EC_POINT_set_Jprojective_coordinates_GFp() and - EC_POINT_get_Jprojective_coordinates_GFp(). These functions are not widely - used and applications should instead use the - L and - L functions. + EC_POINT_get_Jprojective_coordinates_GFp(). *Billy Bob Brumley* @@ -768,15 +492,7 @@ OpenSSL 3.0 *Paul Dale* * The security strength of SHA1 and MD5 based signatures in TLS has been - reduced. This results in SSL 3, TLS 1.0, TLS 1.1 and DTLS 1.0 no longer - working at the default security level of 1 and instead requires security - level 0. The security level can be changed either using the cipher string - with `@SECLEVEL`, or calling `SSL_CTX_set_security_level()`. This also means - that where the signature algorithms extension is missing from a ClientHello - then the handshake will fail in TLS 1.2 at security level 1. This is because, - although this extension is optional, failing to provide one means that - OpenSSL will fallback to a default set of signature algorithms. This default - set requires the availability of SHA1. + reduced. *Kurt Roeckx* @@ -786,8 +502,6 @@ OpenSSL 3.0 *Richard Levitte* * ASN1_verify(), ASN1_digest() and ASN1_sign() have been deprecated. - They are old functions that we don't use, and that you could disable with - the macro NO_ASN1_OLD. This goes all the way back to OpenSSL 0.9.7. *Richard Levitte* @@ -855,70 +569,12 @@ OpenSSL 3.0 *David von Oheimb* - * All of the low-level RSA functions have been deprecated including: - - RSA_new, RSA_new_method, RSA_size, RSA_security_bits, RSA_get0_pss_params, - RSA_get_version, RSA_get0_engine, RSA_generate_key_ex, - RSA_generate_multi_prime_key, RSA_X931_derive_ex, RSA_X931_generate_key_ex, - RSA_check_key, RSA_check_key_ex, RSA_public_encrypt, RSA_private_encrypt, - RSA_public_decrypt, RSA_private_decrypt, RSA_set_default_method, - RSA_get_default_method, RSA_null_method, RSA_get_method, RSA_set_method, - RSA_PKCS1_OpenSSL, RSA_print_fp, RSA_print, RSA_sign, RSA_verify, - RSA_sign_ASN1_OCTET_STRING, RSA_verify_ASN1_OCTET_STRING, RSA_blinding_on, - RSA_blinding_off, RSA_setup_blinding, RSA_padding_add_PKCS1_type_1, - RSA_padding_check_PKCS1_type_1, RSA_padding_add_PKCS1_type_2, - RSA_padding_check_PKCS1_type_2, PKCS1_MGF1, RSA_padding_add_PKCS1_OAEP, - RSA_padding_check_PKCS1_OAEP, RSA_padding_add_PKCS1_OAEP_mgf1, - RSA_padding_check_PKCS1_OAEP_mgf1, RSA_padding_add_SSLv23, - RSA_padding_check_SSLv23, RSA_padding_add_none, RSA_padding_check_none, - RSA_padding_add_X931, RSA_padding_check_X931, RSA_X931_hash_id, - RSA_verify_PKCS1_PSS, RSA_padding_add_PKCS1_PSS, RSA_verify_PKCS1_PSS_mgf1, - RSA_padding_add_PKCS1_PSS_mgf1, RSA_set_ex_data, RSA_get_ex_data, - RSA_meth_new, RSA_meth_free, RSA_meth_dup, RSA_meth_get0_name, - RSA_meth_set1_name, RSA_meth_get_flags, RSA_meth_set_flags, - RSA_meth_get0_app_data, RSA_meth_set0_app_data, RSA_meth_get_pub_enc, - RSA_meth_set_pub_enc, RSA_meth_get_pub_dec, RSA_meth_set_pub_dec, - RSA_meth_get_priv_enc, RSA_meth_set_priv_enc, RSA_meth_get_priv_dec, - RSA_meth_set_priv_dec, RSA_meth_get_mod_exp, RSA_meth_set_mod_exp, - RSA_meth_get_bn_mod_exp, RSA_meth_set_bn_mod_exp, RSA_meth_get_init, - RSA_meth_set_init, RSA_meth_get_finish, RSA_meth_set_finish, - RSA_meth_get_sign, RSA_meth_set_sign, RSA_meth_get_verify, - RSA_meth_set_verify, RSA_meth_get_keygen, RSA_meth_set_keygen, - RSA_meth_get_multi_prime_keygen and RSA_meth_set_multi_prime_keygen. - - Use of these low-level functions has been informally discouraged for a long - time. Instead applications should use L, - L, L and - L. - For replacement of the functions manipulating the RSA objects - see the L manual page. - A simple way of generating RSA keys is L. - - All of these low-level RSA functions have been deprecated without - replacement: - - RSA_blinding_off, RSA_blinding_on, RSA_clear_flags, RSA_get_version, - RSAPrivateKey_dup, RSAPublicKey_dup, RSA_set_flags, RSA_setup_blinding and - RSA_test_flags. - - All of these RSA flags have been deprecated without replacement: - - RSA_FLAG_BLINDING, RSA_FLAG_CACHE_PRIVATE, RSA_FLAG_CACHE_PUBLIC, - RSA_FLAG_EXT_PKEY, RSA_FLAG_NO_BLINDING, RSA_FLAG_THREAD_SAFE and - RSA_METHOD_FLAG_NO_CHECK. + * All of the low level RSA functions have been deprecated. *Paul Dale* * X509 certificates signed using SHA1 are no longer allowed at security level 1 and above. - In TLS/SSL the default security level is 1. It can be set either - using the cipher string with `@SECLEVEL`, or calling - `SSL_CTX_set_security_level()`. If the leaf certificate is signed with SHA-1, - a call to `SSL_CTX_use_certificate()` will fail if the security level is not - lowered first. - Outside TLS/SSL, the default security level is -1 (effectively 0). It can - be set using `X509_VERIFY_PARAM_set_auth_level()` or using the `-auth_level` - options of the commands. *Kurt Roeckx* @@ -929,7 +585,6 @@ OpenSSL 3.0 *Paul Dale* * The command line utility rsautl has been deprecated. - Instead use the pkeyutl program. *Paul Dale* @@ -939,120 +594,24 @@ OpenSSL 3.0 *Paul Dale* - * All of the low-level DH functions have been deprecated including: - - DH_OpenSSL, DH_set_default_method, DH_get_default_method, DH_set_method, - DH_new_method, DH_new, DH_free, DH_up_ref, DH_bits, DH_set0_pqg, DH_size, - DH_security_bits, DH_get_ex_new_index, DH_set_ex_data, DH_get_ex_data, - DH_generate_parameters_ex, DH_check_params_ex, DH_check_ex, DH_check_pub_key_ex, - DH_check, DH_check_pub_key, DH_generate_key, DH_compute_key, - DH_compute_key_padded, DHparams_print_fp, DHparams_print, DH_get_nid, - DH_KDF_X9_42, DH_get0_engine, DH_meth_new, DH_meth_free, DH_meth_dup, - DH_meth_get0_name, DH_meth_set1_name, DH_meth_get_flags, DH_meth_set_flags, - DH_meth_get0_app_data, DH_meth_set0_app_data, DH_meth_get_generate_key, - DH_meth_set_generate_key, DH_meth_get_compute_key, DH_meth_set_compute_key, - DH_meth_get_bn_mod_exp, DH_meth_set_bn_mod_exp, DH_meth_get_init, - DH_meth_set_init, DH_meth_get_finish, DH_meth_set_finish, - DH_meth_get_generate_params and DH_meth_set_generate_params. - - Use of these low-level functions has been informally discouraged for a long - time. Instead applications should use L - and L. - - These low-level DH functions have been deprecated without replacement: - - DH_clear_flags, DH_get_1024_160, DH_get_2048_224, DH_get_2048_256, - DH_set_flags and DH_test_flags. - - The DH_FLAG_CACHE_MONT_P flag has been deprecated without replacement. - The DH_FLAG_TYPE_DH and DH_FLAG_TYPE_DHX have been deprecated. Use - EVP_PKEY_is_a() to determine the type of a key. There is no replacement for - setting these flags. - - Additionally functions that read and write DH objects such as d2i_DHparams, - i2d_DHparams, PEM_read_DHparam, PEM_write_DHparams and other similar - functions have also been deprecated. Applications should instead use the - OSSL_DECODER and OSSL_ENCODER APIs to read and write DH files. - - Finally functions that assign or obtain DH objects from an EVP_PKEY such as - `EVP_PKEY_assign_DH()`, `EVP_PKEY_get0_DH()`, `EVP_PKEY_get1_DH()`, and - `EVP_PKEY_set1_DH()` are also deprecated. - Applications should instead either read or write an - EVP_PKEY directly using the OSSL_DECODER and OSSL_ENCODER APIs. - Or load an EVP_PKEY directly from DH data using `EVP_PKEY_fromdata()`. + * All of the low level DH functions have been deprecated. *Paul Dale and Matt Caswell* - * All of the low-level DSA functions have been deprecated including: - - DSA_new, DSA_free, DSA_up_ref, DSA_bits, DSA_get0_pqg, DSA_set0_pqg, - DSA_get0_key, DSA_set0_key, DSA_get0_p, DSA_get0_q, DSA_get0_g, - DSA_get0_pub_key, DSA_get0_priv_key, DSA_clear_flags, DSA_test_flags, - DSA_set_flags, DSA_do_sign, DSA_do_verify, DSA_OpenSSL, - DSA_set_default_method, DSA_get_default_method, DSA_set_method, - DSA_get_method, DSA_new_method, DSA_size, DSA_security_bits, - DSA_sign_setup, DSA_sign, DSA_verify, DSA_get_ex_new_index, - DSA_set_ex_data, DSA_get_ex_data, DSA_generate_parameters_ex, - DSA_generate_key, DSA_meth_new, DSA_get0_engine, DSA_meth_free, - DSA_meth_dup, DSA_meth_get0_name, DSA_meth_set1_name, DSA_meth_get_flags, - DSA_meth_set_flags, DSA_meth_get0_app_data, DSA_meth_set0_app_data, - DSA_meth_get_sign, DSA_meth_set_sign, DSA_meth_get_sign_setup, - DSA_meth_set_sign_setup, DSA_meth_get_verify, DSA_meth_set_verify, - DSA_meth_get_mod_exp, DSA_meth_set_mod_exp, DSA_meth_get_bn_mod_exp, - DSA_meth_set_bn_mod_exp, DSA_meth_get_init, DSA_meth_set_init, - DSA_meth_get_finish, DSA_meth_set_finish, DSA_meth_get_paramgen, - DSA_meth_set_paramgen, DSA_meth_get_keygen and DSA_meth_set_keygen. - - Use of these low-level functions has been informally discouraged for a long - time. Instead applications should use L, - L and L. - - These low-level DSA functions have been deprecated without replacement: - - DSA_clear_flags, DSA_dup_DH, DSAparams_dup, DSA_set_flags and - DSA_test_flags. - - The DSA_FLAG_CACHE_MONT_P flag has been deprecated without replacement. - - Finally functions that assign or obtain DSA objects from an EVP_PKEY such as - `EVP_PKEY_assign_DSA()`, `EVP_PKEY_get0_DSA()`, `EVP_PKEY_get1_DSA()`, and - `EVP_PKEY_set1_DSA()` are also deprecated. - Applications should instead either read or write an - EVP_PKEY directly using the OSSL_DECODER and OSSL_ENCODER APIs, - or load an EVP_PKEY directly from DSA data using `EVP_PKEY_fromdata()`. + * All of the low level DSA functions have been deprecated. *Paul Dale* * Reworked the treatment of EC EVP_PKEYs with the SM2 curve to - automatically become EVP_PKEY_SM2 rather than EVP_PKEY_EC. This is a breaking - change from previous OpenSSL versions. - - Unlike in previous OpenSSL versions, this means that applications must not - call `EVP_PKEY_set_alias_type(pkey, EVP_PKEY_SM2)` to get SM2 computations. - The `EVP_PKEY_set_alias_type` function has now been removed. - - Parameter and key generation is also reworked to make it possible - to generate EVP_PKEY_SM2 parameters and keys. Applications must now generate - SM2 keys directly and must not create an EVP_PKEY_EC key first. + automatically become EVP_PKEY_SM2 rather than EVP_PKEY_EC. *Richard Levitte* - * Deprecated low-level ECDH and ECDSA functions. These include: - - ECDH_compute_key, ECDSA_do_sign, ECDSA_do_sign_ex, ECDSA_do_verify, - ECDSA_sign_setup, ECDSA_sign, ECDSA_sign_ex, ECDSA_verify and - ECDSA_size. - - Use of these low-level functions has been informally discouraged for a long - time. Instead applications should use the EVP_PKEY_derive(3), - EVP_DigestSign(3) and EVP_DigestVerify(3) functions. + * Deprecated low level ECDH and ECDSA functions. *Paul Dale* - * Deprecated EVP_PKEY_decrypt_old(), please use EVP_PKEY_decrypt_init() - and EVP_PKEY_decrypt() instead. - Deprecated EVP_PKEY_encrypt_old(), please use EVP_PKEY_encrypt_init() - and EVP_PKEY_encrypt() instead. + * Deprecated EVP_PKEY_decrypt_old() and EVP_PKEY_encrypt_old(). *Richard Levitte* @@ -1064,20 +623,10 @@ OpenSSL 3.0 *Richard Levitte* * The SSL_CTX_set_tlsext_ticket_key_cb(3) function has been deprecated. - Instead used the new SSL_CTX_set_tlsext_ticket_key_evp_cb(3) function. *Paul Dale* - * All low level HMAC functions except for HMAC have been deprecated including: - - HMAC_size, HMAC_CTX_new, HMAC_CTX_reset, HMAC_CTX_free, - HMAC_Init_ex, HMAC_Update, HMAC_Final, HMAC_CTX_copy, HMAC_CTX_set_flags - and HMAC_CTX_get_md. - - Use of these low-level functions has been informally discouraged for a long - time. Instead applications should use L, - L, L, L - and L or the single-shot MAC function L. + * All of the low level HMAC functions have been deprecated. *Paul Dale and David von Oheimb* @@ -1093,40 +642,12 @@ OpenSSL 3.0 *Rich Salz* - * All of the low-level CMAC functions have been deprecated including: - - CMAC_CTX_new, CMAC_CTX_cleanup, CMAC_CTX_free, CMAC_CTX_get0_cipher_ctx, - CMAC_CTX_copy, CMAC_Init, CMAC_Update, CMAC_Final and CMAC_resume. - - Use of these low-level functions has been informally discouraged for a long - time. Instead applications should use L, - L, L, L - and L. + * All of the low level CMAC functions have been deprecated. *Paul Dale* * The low-level MD2, MD4, MD5, MDC2, RIPEMD160, SHA1, SHA224, SHA256, SHA384, SHA512 and Whirlpool digest functions have been deprecated. - These include: - - MD2, MD2_options, MD2_Init, MD2_Update, MD2_Final, MD4, MD4_Init, - MD4_Update, MD4_Final, MD4_Transform, MD5, MD5_Init, MD5_Update, - MD5_Final, MD5_Transform, MDC2, MDC2_Init, MDC2_Update, MDC2_Final, - RIPEMD160, RIPEMD160_Init, RIPEMD160_Update, RIPEMD160_Final, - RIPEMD160_Transform, SHA1_Init, SHA1_Update, SHA1_Final, SHA1_Transform, - SHA224_Init, SHA224_Update, SHA224_Final, SHA224_Transform, - SHA256_Init, SHA256_Update, SHA256_Final, SHA256_Transform, - SHA384_Init, SHA384_Update, SHA384_Final, - SHA512_Init, SHA512_Update, SHA512_Final, SHA512_Transform, - WHIRLPOOL, WHIRLPOOL_Init, - WHIRLPOOL_Update, WHIRLPOOL_BitUpdate and WHIRLPOOL_Final. - - Use of these low-level functions has been informally discouraged - for a long time. Applications should use the L, - L, and L functions instead. - Alternatively, the quick one-shot function L can be used. - SHA1, SHA224, SHA256, SHA384 and SHA512 have changed from functions to macros - like this: (EVP_Q_digest(NULL, "SHA256", NULL, d, n, md, NULL) ? md : NULL). *Paul Dale and David von Oheimb* @@ -1140,42 +661,7 @@ OpenSSL 3.0 *Richard Levitte* - * All of the low-level cipher functions have been deprecated including: - - AES_options, AES_set_encrypt_key, AES_set_decrypt_key, AES_encrypt, - AES_decrypt, AES_ecb_encrypt, AES_cbc_encrypt, AES_cfb128_encrypt, - AES_cfb1_encrypt, AES_cfb8_encrypt, AES_ofb128_encrypt, - AES_wrap_key, AES_unwrap_key, BF_set_key, BF_encrypt, BF_decrypt, - BF_ecb_encrypt, BF_cbc_encrypt, BF_cfb64_encrypt, BF_ofb64_encrypt, - BF_options, Camellia_set_key, Camellia_encrypt, Camellia_decrypt, - Camellia_ecb_encrypt, Camellia_cbc_encrypt, Camellia_cfb128_encrypt, - Camellia_cfb1_encrypt, Camellia_cfb8_encrypt, Camellia_ofb128_encrypt, - Camellia_ctr128_encrypt, CAST_set_key, CAST_encrypt, CAST_decrypt, - CAST_ecb_encrypt, CAST_cbc_encrypt, CAST_cfb64_encrypt, - CAST_ofb64_encrypt, DES_options, DES_encrypt1, DES_encrypt2, - DES_encrypt3, DES_decrypt3, DES_cbc_encrypt, DES_ncbc_encrypt, - DES_pcbc_encrypt, DES_xcbc_encrypt, DES_cfb_encrypt, DES_cfb64_encrypt, - DES_ecb_encrypt, DES_ofb_encrypt, DES_ofb64_encrypt, DES_random_key, - DES_set_odd_parity, DES_check_key_parity, DES_is_weak_key, DES_set_key, - DES_key_sched, DES_set_key_checked, DES_set_key_unchecked, - DES_string_to_key, DES_string_to_2keys, DES_fixup_key_parity, - DES_ecb2_encrypt, DES_ede2_cbc_encrypt, DES_ede2_cfb64_encrypt, - DES_ede2_ofb64_encrypt, DES_ecb3_encrypt, DES_ede3_cbc_encrypt, - DES_ede3_cfb64_encrypt, DES_ede3_cfb_encrypt, DES_ede3_ofb64_encrypt, - DES_cbc_cksum, DES_quad_cksum, IDEA_encrypt, IDEA_options, - IDEA_ecb_encrypt, IDEA_set_encrypt_key, IDEA_set_decrypt_key, - IDEA_cbc_encrypt, IDEA_cfb64_encrypt, IDEA_ofb64_encrypt, RC2_set_key, - RC2_encrypt, RC2_decrypt, RC2_ecb_encrypt, RC2_cbc_encrypt, - RC2_cfb64_encrypt, RC2_ofb64_encrypt, RC4, RC4_options, RC4_set_key, - RC5_32_set_key, RC5_32_encrypt, RC5_32_decrypt, RC5_32_ecb_encrypt, - RC5_32_cbc_encrypt, RC5_32_cfb64_encrypt, RC5_32_ofb64_encrypt, - SEED_set_key, SEED_encrypt, SEED_decrypt, SEED_ecb_encrypt, - SEED_cbc_encrypt, SEED_cfb128_encrypt and SEED_ofb128_encrypt. - - Use of these low-level functions has been informally discouraged for - a long time. Applications should use the high level EVP APIs, e.g. - EVP_EncryptInit_ex, EVP_EncryptUpdate, EVP_EncryptFinal_ex, and the - equivalently named decrypt functions instead. + * All of the low level cipher functions have been deprecated. *Matt Caswell and Paul Dale* @@ -1223,21 +709,7 @@ OpenSSL 3.0 *Rich Salz* * Introduced a new method type and API, OSSL_ENCODER, to - represent generic encoders. An implementation is expected to - be able to encode an object associated with a given name (such - as an algorithm name for an asymmetric key) into forms given by - implementation properties. - - Encoders are primarily used from inside libcrypto, through - calls to functions like EVP_PKEY_print_private(), - PEM_write_bio_PrivateKey() and similar. - - Encoders are specified in such a way that they can be made to - directly handle the provider side portion of an object, if this - provider side part comes from the same provider as the encoder - itself, but can also be made to handle objects in parametrized - form (as an OSSL_PARAM array of data). This allows a provider to - offer generic encoders as a service for any other provider. + represent generic encoders. *Richard Levitte* @@ -1254,11 +726,7 @@ OpenSSL 3.0 *Richard Levitte* - * Added functionality to create an EVP_PKEY from user data. This - is effectively the same as creating a RSA, DH or DSA object and - then assigning them to an EVP_PKEY, but directly using algorithm - agnostic EVP functions. A benefit is that this should be future - proof for public key algorithms to come. + * Added functionality to create an EVP_PKEY from user data. *Richard Levitte* @@ -1362,13 +830,9 @@ OpenSSL 3.0 ERR_peek_error_data(), ERR_peek_last_error_data(), ERR_get_error_all(), ERR_peek_error_all() and ERR_peek_last_error_all(). - These functions have become deprecated: ERR_get_error_line(), - ERR_get_error_line_data(), ERR_peek_error_line_data(), - ERR_peek_last_error_line_data() and ERR_func_error_string(). - - Users are recommended to use ERR_get_error_all(), or to pick information - with ERR_peek functions and finish off with getting the error code by using - ERR_get_error(). + Deprecate ERR functions ERR_get_error_line(), ERR_get_error_line_data(), + ERR_peek_error_line_data(), ERR_peek_last_error_line_data() and + ERR_func_error_string(). *Richard Levitte* @@ -1575,12 +1039,6 @@ OpenSSL 3.0 *Tomáš Mráz* * Change PBKDF2 to conform to SP800-132 instead of the older PKCS5 RFC2898. - This checks that the salt length is at least 128 bits, the derived key - length is at least 112 bits, and that the iteration count is at least 1000. - For backwards compatibility these checks are disabled by default in the - default provider, but are enabled by default in the fips provider. - To enable or disable these checks use the control - EVP_KDF_CTRL_SET_PBKDF2_PKCS5_MODE. *Shane Lontis* @@ -1614,14 +1072,7 @@ OpenSSL 3.0 *Richard Levitte* * The functions AES_ige_encrypt() and AES_bi_ige_encrypt() have been - deprecated. These undocumented functions were never integrated into the EVP - layer and implement the AES Infinite Garble Extension (IGE) mode and AES - Bi-directional IGE mode. These modes were never formally standardised and - usage of these functions is believed to be very small. In particular - AES_bi_ige_encrypt() has a known bug. It accepts 2 AES keys, but only one - is ever used. The security implications are believed to be minimal, but - this issue was never fixed for backwards compatibility reasons. New code - should not use these modes. + deprecated. *Matt Caswell* @@ -1652,17 +1103,7 @@ OpenSSL 3.0 *Richard Levitte* * Added a new generic trace API which provides support for enabling - instrumentation through trace output. This feature is mainly intended - as an aid for developers and is disabled by default. To utilize it, - OpenSSL needs to be configured with the `enable-trace` option. - - If the tracing API is enabled, the application can activate trace output - by registering BIOs as trace channels for a number of tracing and debugging - categories. - - The `openssl` program has been expanded to enable any of the types - available via environment variables defined by the user, and serves as - one possible example on how to use this functionality. + instrumentation through trace output. *Richard Levitte & Matthias St. Pierre* @@ -1780,8 +1221,7 @@ OpenSSL 3.0 *Richard Levitte* - * Deprecate ECDH_KDF_X9_62() and mark its replacement as internal. Users - should use the EVP interface instead (EVP_PKEY_CTX_set_ecdh_kdf_type). + * Deprecate ECDH_KDF_X9_62(). *Antoine Salon* @@ -1822,11 +1262,7 @@ OpenSSL 3.0 *Boris Pismenny* - * The SSL option SSL_OP_CLEANSE_PLAINTEXT is introduced. If that - option is set, openssl cleanses (zeroize) plaintext bytes from - internal buffers after delivering them to the application. Note, - the application is still responsible for cleansing other copies - (e.g.: data received by SSL_read(3)). + * The SSL option SSL_OP_CLEANSE_PLAINTEXT is introduced. *Martin Elshuber* @@ -1835,12 +1271,7 @@ OpenSSL 3.0 *David von Oheimb* - * Deprecated pthread fork support methods. These were unused so no - replacement is required. - - - OPENSSL_fork_prepare() - - OPENSSL_fork_parent() - - OPENSSL_fork_child() + * Deprecated pthread fork support methods. *Randall S. Becker* @@ -4951,7 +4382,6 @@ OpenSSL 1.0.2 would be an erroneous display of the certificate in text format. This issue was reported to OpenSSL by the OSS-Fuzz project. - ([CVE-2017-3735]) *Rich Salz* @@ -5227,7 +4657,6 @@ OpenSSL 1.0.2 bytes. This issue was reported by Juraj Somorovsky using TLS-Attacker. - ([CVE-2016-2107]) *Kurt Roeckx* diff --git a/NEWS.md b/NEWS.md index 13b2511651..50a2fd36e2 100644 --- a/NEWS.md +++ b/NEWS.md @@ -20,6 +20,7 @@ OpenSSL 3.0 ### Major changes between OpenSSL 1.1.1 and OpenSSL 3.0 [under development] + * Added migration guide to man7 * Implemented support for fully "pluggable" TLSv1.3 groups * Added suport for Kernel TLS (KTLS) * Changed the license to the Apache License v2.0. diff --git a/README-FIPS.md b/README-FIPS.md index 3dc6c35b89..a8be9ddb31 100644 --- a/README-FIPS.md +++ b/README-FIPS.md @@ -58,411 +58,10 @@ If you configured OpenSSL to be installed to a different location, the paths wil vary accordingly. In the rare case that you need to install the fipsmodule.cnf to non-standard location, you can execute the `openssl fipsinstall` command manually. - Using the FIPS Module in applications ===================================== -There are a number of different ways that OpenSSL can be used in conjunction -with the FIPS module. Which is the correct approach to use will depend on your -own specific circumstances and what you are attempting to achieve. Note that the -old functions `FIPS_mode()` and `FIPS_mode_set()` are no longer present so you -must remove them from your application if you use them. +Documentation about using the FIPS module is available on the [fips_module(7)] +manual page. -Applications written to use the OpenSSL 3.0 FIPS module should not use any -legacy APIs or features that avoid the FIPS module. Specifically this includes: - -- Low level cryptographic APIs (use the high level APIs, such as EVP, instead) -- Engines -- Any functions that create or modify custom "METHODS" (for example -`EVP_MD_meth_new`, `EVP_CIPHER_meth_new`, `EVP_PKEY_meth_new`, `RSA_meth_new`, -`EC_KEY_METHOD_new`, etc.) - -All of the above APIs are deprecated in OpenSSL 3.0 - so a simple rule is to -avoid using all deprecated functions. - -Making all applications use the FIPS module by default ------------------------------------------------------- - -One simple approach is to cause all applications that are using OpenSSL to only -use the FIPS module for cryptographic algorithms by default. - -This approach can be done purely via configuration. As long as applications are -built and linked against OpenSSL 3.0 and do not override the loading of the -default config file or its settings then they can automatically start using the -FIPS module without the need for any further code changes. - -To do this the default OpenSSL config file will have to be modified. The -location of this config file will depend on the platform, and any options that -were given during the build process. You can check the location of the config -file by running this command: - - $ openssl version -d - OPENSSLDIR: "/usr/local/ssl" - -Caution: Many Operating Systems install OpenSSL by default. It is a common error -to not have the correct version of OpenSSL on your $PATH. Check that you are -running an OpenSSL 3.0 version like this: - - $ openssl version -v - OpenSSL 3.0.0-dev xx XXX xxxx (Library: OpenSSL 3.0.0-dev xx XXX xxxx) - -The OPENSSLDIR value above gives the directory name for where the default config -file is stored. So in this case the default config file will be called -`/usr/local/ssl/openssl.cnf` - -Edit the config file to add the following lines near the beginning: - - openssl_conf = openssl_init - - .include /usr/local/ssl/fipsmodule.cnf - - [openssl_init] - providers = provider_sect - - [provider_sect] - fips = fips_sect - base = base_sect - - [base_sect] - activate = 1 - -Obviously the include file location above should match the name of the FIPS -module config file that you installed earlier. - -Any applications that use OpenSSL 3.0 and are started after these changes are -made will start using only the FIPS module unless those applications take -explicit steps to avoid this default behaviour. Note that this configuration -also activates the "base" provider. The base provider does not include any -cryptographic algorithms (and therefore does not impact the validation status of -any cryptographic operations), but does include other supporting algorithms that -may be required. It is designed to be used in conjunction with the FIPS module. - -This approach has the primary advantage that it is simple, and no code changes -are required in applications in order to benefit from the FIPS module. There are -some disadvantages to this approach: - -- You may not want all applications to use the FIPS module. It may be the case -that some applications should and some should not. -- If applications take explicit steps to not load the default config file or set -different settings then this method will not work for them -- The algorithms available in the FIPS module are a subset of the algorithms -that are available in the default OpenSSL Provider. If those applications -attempt to use any algorithms that are not present, then they will fail. -- Usage of certain deprecated APIs avoids the use of the FIPS module. If any -applications use those APIs then the FIPS module will not be used. - -Selectively making applications use the FIPS module by default --------------------------------------------------------------- - -A variation on the above approach is to do the same thing on an individual -application basis. The default OpenSSL config file depends on the compiled in -value for OPENSSLDIR as described in the section above. However it is also -possible to override the config file to be used via the `OPENSSL_CONF` -environment variable. For example the following on Unix will cause the -application to be executed with a non-standard config file location: - - $ OPENSSL_CONF=/my/non-default/openssl.cnf myapplication - -Using this mechanism you can control which config file is loaded (and hence -whether the FIPS module is loaded) on an application by application basis. - -This removes the disadvantage listed above that you may not want all -applications to use the FIPS module. All the other advantages and disadvantages -still apply. - -Programmatically loading the FIPS module (default library context) ------------------------------------------------------------------- - -Applications may choose to load the FIPS provider explicitly rather than relying -on config to do this. The config file is still necessary in order to hold the -FIPS module config data (such as its self test status and integrity data). But -in this case we do not automatically activate the FIPS provider via that config -file. - -To do things this way configure as per the section "Making all applications use -the FIPS module by default" above, but edit the `fipsmodule.cnf` file to remove -or comment out the line which says `activate = 1` (note that setting this value -to 0 is **not** sufficient). This means all the required config information will -be available to load the FIPS module, but it is not actually automatically -loaded when the application starts. The FIPS provider can then be loaded -programmatically like this: - - #include - - int main(void) - { - OSSL_PROVIDER *fips; - OSSL_PROVIDER *base; - - fips = OSSL_PROVIDER_load(NULL, "fips"); - if (fips == NULL) { - printf("Failed to load FIPS provider\n"); - exit(EXIT_FAILURE); - } - base = OSSL_PROVIDER_load(NULL, "base"); - if (base == NULL) { - OSSL_PROVIDER_unload(fips); - printf("Failed to load base provider\n"); - exit(EXIT_FAILURE); - } - - /* Rest of application */ - - OSSL_PROVIDER_unload(base); - OSSL_PROVIDER_unload(fips); - exit(EXIT_SUCCESS); - } - -Note that this should be one of the first things that you do in your -application. If any OpenSSL functions get called that require the use of -cryptographic functions before this occurs then, if no provider has yet been -loaded, then the default provider will be automatically loaded. If you then -later explicitly load the FIPS provider then you will have both the FIPS and the -default provider loaded at the same time. It is undefined which implementation -of an algorithm will be used if multiple implementations are available and you -have not explicitly specified via a property query (see below) which one should -be used. - -Also note that in this example we have additionally loaded the "base" provider. -This loads a sub-set of algorithms that are also available in the default -provider - specifically non cryptographic ones which may be used in conjunction -with the FIPS provider. For example this contains algorithms for encoding and -decoding keys. If you decide not to load the default provider then you -will usually want to load the base provider instead. - -In this example we are using the "default" library context. OpenSSL functions -operate within the scope of a library context. If no library context is -explicitly specified then the default library context is used. For further -details about library contexts see the `OSSL_LIB_CTX(3)` man page. - -Loading the FIPS module at the same time as other providers ------------------------------------------------------------ - -It is possible to have the FIPS provider and other providers (such as the -default provider) all loaded at the same time into the same library context. You -can use a property query string during algorithm fetches to specify which -implementation you would like to use. - -For example to fetch an implementation of SHA256 which conforms to FIPS -standards you can specify the property query `fips=yes` like this: - - EVP_MD *sha256; - - sha256 = EVP_MD_fetch(NULL, "SHA2-256", "fips=yes"); - -If no property query is specified, or more than one implementation matches the -property query then it is undefined which implementation of a particular -algorithm will be returned. - -This example shows an explicit request for an implementation of SHA256 from the -default provider: - - EVP_MD *sha256; - - sha256 = EVP_MD_fetch(NULL, "SHA2-256", "provider=default"); - -It is also possible to set a default property query string. The following -example sets the default property query of "fips=yes" for all fetches within the -default library context: - - EVP_set_default_properties(NULL, "fips=yes"); - -If a fetch function has both an explicit property query specified, and a -default property query is defined then the two queries are merged together and -both apply. The local property query overrides the default properties if the -same property name is specified in both. - -There are two important built-in properties that you should be aware of: - -The "provider" property enables you to specify which provider you want an -implementation to be fetched from, e.g. `provider=default` or `provider=fips`. -All algorithms implemented in a provider have this property set on them. - -There is also the `fips` property. All FIPS algorithms match against the -property query `fips=yes`. There are also some non-cryptographic algorithms -available in the default and base providers that also have the `fips=yes` -property defined for them. These are the encoder and decoder algorithms that -can (for example) be used to write out a key generated in the FIPS provider to a -file. The encoder and decoder algorithms are not in the FIPS module itself but -are allowed to be used in conjunction with the FIPS algorithms. - -It is possible to specify default properties within a config file. For example -the following config file automatically loads the default and fips providers and -sets the default property value to be `fips=yes`. Note that this config file -does not load the "base" provider. All supporting algorithms that are in "base" -are also in "default", so it is unnecessary in this case: - - openssl_conf = openssl_init - - .include /usr/local/ssl/fipsmodule.cnf - - [openssl_init] - providers = provider_sect - alg_section = algorithm_sect - - [provider_sect] - fips = fips_sect - default = default_sect - - [default_sect] - activate = 1 - - [algorithm_sect] - default_properties = fips=yes - -Programmatically loading the FIPS module (non-default library context) ----------------------------------------------------------------------- - -In addition to using properties to separate usage of the FIPS module from other -usages this can also be achieved using library contexts. In this example we -create two library contexts. In one we assume the existence of a config file -called "openssl-fips.cnf" that automatically loads and configures the FIPS and -base providers. The other library context will just use the default provider. - - OSSL_LIB_CTX *fipslibctx, *nonfipslibctx; - OSSL_PROVIDER *defctxnull = NULL; - EVP_MD *fipssha256 = NULL, *nonfipssha256 = NULL; - int ret = 1; - - /* - * Create two non-default library contexts. One for fips usage and one for - * non-fips usage - */ - fipslibctx = OSSL_LIB_CTX_new(); - nonfipslibctx = OSSL_LIB_CTX_new(); - if (fipslibctx == NULL || nonfipslibctx == NULL) - goto err; - - /* Prevent anything from using the default library context */ - defctxnull = OSSL_PROVIDER_load(NULL, "null"); - - /* - * Load config file for the FIPS library context. We assume that this - * config file will automatically activate the FIPS and base providers so we - * don't need to explicitly load them here. - */ - if (!OSSL_LIB_CTX_load_config(fipslibctx, "openssl-fips.cnf")) - goto err; - - /* - * We don't need to do anything special to load the default provider into - * nonfipslibctx. This happens automatically if no other providers are - * loaded. Because we don't call OSSL_LIB_CTX_load_config() explicitly for - * nonfipslibctx it will just use the default config file. - */ - - /* As an example get some digests */ - - /* Get a FIPS validated digest */ - fipssha256 = EVP_MD_fetch(fipslibctx, "SHA2-256", NULL); - if (fipssha256 == NULL) - goto err; - - /* Get a non-FIPS validated digest */ - nonfipssha256 = EVP_MD_fetch(nonfipslibctx, "SHA2-256", NULL); - if (nonfipssha256 == NULL) - goto err; - - /* Use the digests */ - - printf("Success\n"); - ret = 0; - - err: - EVP_MD_free(fipssha256); - EVP_MD_free(nonfipssha256); - OSSL_LIB_CTX_free(fipslibctx); - OSSL_LIB_CTX_free(nonfipslibctx); - OSSL_PROVIDER_unload(defctxnull); - - return ret; - -Note that we have made use of the special "null" provider here which we load -into the default library context. We could have chosen to use the default -library context for FIPS usage, and just create one additional library context -for other usages - or vice versa. However if code has not been converted to use -library contexts then the default library context will be automatically used. -This could be the case for your own existing applications as well as certain -parts of OpenSSL itself. Not all parts of OpenSSL are library context aware. If -this happens then you could "accidentally" use the wrong library context for a -particular operation. To be sure this doesn't happen you can load the "null" -provider into the default library context. Because a provider has been -explicitly loaded, the default provider will not automatically load. This means -code using the default context by accident will fail because no algorithms will -be available. - -Using Encoders and Decoders with the FIPS module ------------------------------------------------- - -Encoders and decoders are used to read and write keys or parameters from or to -some external format (for example a PEM file). If your application generates -keys or parameters that then need to be written into PEM or DER format -then it is likely that you will need to use an encoder to do this. Similarly -you need a decoder to read previously saved keys and parameters. In most cases -this will be invisible to you if you are using APIs that existed in -OpenSSL 1.1.1 or earlier such as i2d_PrivateKey. However the appropriate -encoder/decoder will need to be available in the library context associated with -the key or parameter object. The built-in OpenSSL encoders and decoders are -implemented in both the default and base providers and are not in the FIPS -module boundary. However since they are not cryptographic algorithms themselves -it is still possible to use them in conjunction with the FIPS module, and -therefore these encoders/decoders have the "fips=yes" property against them. -You should ensure that either the default or base provider is loaded into the -library context in this case. - -Using the FIPS module in SSL/TLS --------------------------------- - -Writing an application that uses libssl in conjunction with the FIPS module is -much the same as writing a normal libssl application. If you are using global -properties and the default library context to specify usage of FIPS validated -algorithms then this will happen automatically for all cryptographic algorithms -in libssl. If you are using a non-default library context to load the FIPS -provider then you can supply this to libssl using the function -`SSL_CTX_new_ex()`. This works as a drop in replacement for the function -`SSL_CTX_new()` except it provides you with the capability to specify the -library context to be used. You can also use the same function to specify -libssl specific properties to use. - -In this first example we create two SSL_CTX objects using two different library -contexts. - - /* - * We assume that a non-default library context with the FIPS provider - * loaded has been created called fips_libctx. - / - SSL_CTX *fips_ssl_ctx = SSL_CTX_new_ex(fips_libctx, NULL, TLS_method()); - /* - * We assume that a non-default library context with the default provider - * loaded has been created called non_fips_libctx. - */ - SSL_CTX *non_fips_ssl_ctx = SSL_CTX_new_ex(non_fips_libctx, NULL, - TLS_method()); - -In this second example we create two SSL_CTX objects using different properties -to specify FIPS usage: - - /* - * The "fips=yes" property includes all FIPS approved algorithms as well as - * encoders from the default provider that are allowed to be used. The NULL - * below indicates that we are using the default library context. - */ - SSL_CTX *fips_ssl_ctx = SSL_CTX_new_ex(NULL, "fips=yes", TLS_method()); - /* - * The "provider!=fips" property allows algorithms from any provider except - * the FIPS provider - */ - SSL_CTX *non_fips_ssl_ctx = SSL_CTX_new_ex(NULL, "provider!=fips", - TLS_method()); - -Confirming that an algorithm is being provided by the FIPS module ------------------------------------------------------------------ - -A chain of links needs to be followed to go from an algorithm instance to the -provider that implements it. The process is similar for all algorithms. Here the -example of a digest is used. - -To go from an `EVP_MD_CTX` to an `EVP_MD`, use the `EVP_MD_CTX_md()` call. To go -from the `EVP_MD` to its `OSSL_PROVIDER`, use the `EVP_MD_provider()` call. To -extract the name from the `OSSL_PROVIDER`, use the `OSSL_PROVIDER_name()` call. -Finally, use `strcmp(3)` or `printf(3)` on the name. + [fips_module(7)]: https://www.openssl.org/docs/manmaster/man7/fips_module.html diff --git a/doc/build.info b/doc/build.info index 02882af91e..f64919a7c4 100644 --- a/doc/build.info +++ b/doc/build.info @@ -4292,6 +4292,10 @@ DEPEND[html/man7/evp.html]=man7/evp.pod GENERATE[html/man7/evp.html]=man7/evp.pod DEPEND[man/man7/evp.7]=man7/evp.pod GENERATE[man/man7/evp.7]=man7/evp.pod +DEPEND[html/man7/fips_module.html]=man7/fips_module.pod +GENERATE[html/man7/fips_module.html]=man7/fips_module.pod +DEPEND[man/man7/fips_module.7]=man7/fips_module.pod +GENERATE[man/man7/fips_module.7]=man7/fips_module.pod DEPEND[html/man7/life_cycle-kdf.html]=man7/life_cycle-kdf.pod GENERATE[html/man7/life_cycle-kdf.html]=man7/life_cycle-kdf.pod DEPEND[man/man7/life_cycle-kdf.7]=man7/life_cycle-kdf.pod @@ -4304,6 +4308,10 @@ DEPEND[html/man7/life_cycle-rand.html]=man7/life_cycle-rand.pod GENERATE[html/man7/life_cycle-rand.html]=man7/life_cycle-rand.pod DEPEND[man/man7/life_cycle-rand.7]=man7/life_cycle-rand.pod GENERATE[man/man7/life_cycle-rand.7]=man7/life_cycle-rand.pod +DEPEND[html/man7/migration_guide.html]=man7/migration_guide.pod +GENERATE[html/man7/migration_guide.html]=man7/migration_guide.pod +DEPEND[man/man7/migration_guide.7]=man7/migration_guide.pod +GENERATE[man/man7/migration_guide.7]=man7/migration_guide.pod DEPEND[html/man7/openssl-core.h.html]=man7/openssl-core.h.pod GENERATE[html/man7/openssl-core.h.html]=man7/openssl-core.h.pod DEPEND[man/man7/openssl-core.h.7]=man7/openssl-core.h.pod @@ -4496,9 +4504,11 @@ html/man7/crypto.html \ html/man7/ct.html \ html/man7/des_modes.html \ html/man7/evp.html \ +html/man7/fips_module.html \ html/man7/life_cycle-kdf.html \ html/man7/life_cycle-mac.html \ html/man7/life_cycle-rand.html \ +html/man7/migration_guide.html \ html/man7/openssl-core.h.html \ html/man7/openssl-core_dispatch.h.html \ html/man7/openssl-core_names.h.html \ @@ -4599,9 +4609,11 @@ man/man7/crypto.7 \ man/man7/ct.7 \ man/man7/des_modes.7 \ man/man7/evp.7 \ +man/man7/fips_module.7 \ man/man7/life_cycle-kdf.7 \ man/man7/life_cycle-mac.7 \ man/man7/life_cycle-rand.7 \ +man/man7/migration_guide.7 \ man/man7/openssl-core.h.7 \ man/man7/openssl-core_dispatch.h.7 \ man/man7/openssl-core_names.h.7 \ diff --git a/doc/man3/DH_size.pod b/doc/man3/DH_size.pod index cb30b27ff5..e4b7e429a0 100644 --- a/doc/man3/DH_size.pod +++ b/doc/man3/DH_size.pod @@ -9,26 +9,26 @@ security bits #include - int DH_bits(const DH *dh); - Deprecated since OpenSSL 3.0, can be hidden entirely by defining B with a suitable version value, see L: + int DH_bits(const DH *dh); + int DH_size(const DH *dh); int DH_security_bits(const DH *dh); =head1 DESCRIPTION +The functions described on this page are deprecated. +Applications should instead use L, +L and L. + DH_bits() returns the number of significant bits. B and Bp> must not be B. -The remaining functions described on this page are deprecated. -Applications should instead use L and -L. - DH_size() returns the Diffie-Hellman prime size in bytes. It can be used to determine how much memory must be allocated for the shared secret computed by L. @@ -55,9 +55,7 @@ L =head1 HISTORY -The DH_size() and DH_security_bits() functions were deprecated in OpenSSL 3.0. - -The DH_bits() function was added in OpenSSL 1.1.0. +All functions were deprecated in OpenSSL 3.0. =head1 COPYRIGHT diff --git a/doc/man3/PEM_read_CMS.pod b/doc/man3/PEM_read_CMS.pod index 6c24c437e5..4024b3219c 100644 --- a/doc/man3/PEM_read_CMS.pod +++ b/doc/man3/PEM_read_CMS.pod @@ -85,7 +85,7 @@ L: =head1 DESCRIPTION All of the functions described on this page are deprecated. -Applications should use OSSL_ENCODER_to_bio() and OSSL_ENCODER_from_bio() +Applications should use OSSL_ENCODER_to_bio() and OSSL_DECODER_from_bio() instead. In the description below, B> is used diff --git a/doc/man3/PEM_read_bio_PrivateKey.pod b/doc/man3/PEM_read_bio_PrivateKey.pod index 2addbb4d61..c053d03a21 100644 --- a/doc/man3/PEM_read_bio_PrivateKey.pod +++ b/doc/man3/PEM_read_bio_PrivateKey.pod @@ -194,7 +194,7 @@ L: All of the functions described on this page that have a I of B, B and B are deprecated. Applications should use OSSL_ENCODER_to_bio() and -OSSL_ENCODER_from_bio() instead. +OSSL_DECODER_from_bio() instead. The PEM functions read or write structures in PEM format. In this sense PEM format is simply base64 encoded data surrounded diff --git a/doc/man7/OSSL_PROVIDER-legacy.pod b/doc/man7/OSSL_PROVIDER-legacy.pod index 86ac3fa9a0..1fa86ab2cd 100644 --- a/doc/man7/OSSL_PROVIDER-legacy.pod +++ b/doc/man7/OSSL_PROVIDER-legacy.pod @@ -64,7 +64,8 @@ Not all of these symmetric cipher algorithms are enabled by default. =item DES -=item IDEA +The algorithm names are: DES_ECB, DES_CBC, DES_OFB, DES_CFB, DES_CFB1, DES_CFB8 +and DESX_CBC. =item RC2 @@ -83,8 +84,6 @@ Disabled by default. Use I config option to enable. When algorithms for other operations start appearing, the following =head2 titles are appropriate to use: -- Symmetric Ciphers - - Message Authentication Code (MAC) - Key Derivation Function (KDF) @@ -108,7 +107,7 @@ L =head1 COPYRIGHT -Copyright 2020 The OpenSSL Project Authors. All Rights Reserved. +Copyright 2020-2021 The OpenSSL Project Authors. All Rights Reserved. Licensed under the Apache License 2.0 (the "License"). You may not use this file except in compliance with the License. You can obtain a copy diff --git a/doc/man7/crypto.pod b/doc/man7/crypto.pod index 9db62e5aab..b45404cce0 100644 --- a/doc/man7/crypto.pod +++ b/doc/man7/crypto.pod @@ -75,6 +75,7 @@ Similarly when the application exits the default library context is automatically destroyed. No explicit de-initialisation steps need to be taken. See L for more information about library contexts. +See also L. =head2 Multi-threaded applications @@ -303,7 +304,7 @@ provider can also be selected with the property "fips=yes". The FIPS provider may also contain non-approved algorithm implementations and these can be selected with the property "fips=no". -See L. +See L and L. =head2 Legacy provider diff --git a/doc/man7/fips_module.pod b/doc/man7/fips_module.pod new file mode 100644 index 0000000000..b8a343eb09 --- /dev/null +++ b/doc/man7/fips_module.pod @@ -0,0 +1,443 @@ +=pod + +=head1 NAME + +fips_module - OpenSSL fips module guide + +=head1 SYNOPSIS + +See the individual manual pages for details. + +=head1 DESCRIPTION + +This guide details different ways that OpenSSL can be used in conjunction +with the FIPS module. Which is the correct approach to use will depend on your +own specific circumstances and what you are attempting to achieve. + +Note that the old functions 'FIPS_mode()` and `FIPS_mode_set()` are no longer +present so you must remove them from your application if you use them. + +Applications written to use the OpenSSL 3.0 FIPS module should not use any +legacy APIs or features that avoid the FIPS module. Specifically this includes: + +- Low level cryptographic APIs (use the high level APIs, such as EVP, instead) +- Engines +- Any functions that create or modify custom "METHODS" (for example +`EVP_MD_meth_new`, `EVP_CIPHER_meth_new`, `EVP_PKEY_meth_new`, `RSA_meth_new`, +`EC_KEY_METHOD_new`, etc.) + +All of the above APIs are deprecated in OpenSSL 3.0 - so a simple rule is to +avoid using all deprecated functions. See L for a list of +deprecated functions. + +=head2 Making all applications use the FIPS module by default + +One simple approach is to cause all applications that are using OpenSSL to only +use the FIPS module for cryptographic algorithms by default. + +This approach can be done purely via configuration. As long as applications are +built and linked against OpenSSL 3.0 and do not override the loading of the +default config file or its settings then they can automatically start using the +FIPS module without the need for any further code changes. + +To do this the default OpenSSL config file will have to be modified. The +location of this config file will depend on the platform, and any options that +were given during the build process. You can check the location of the config +file by running this command: + + $ openssl version -d + OPENSSLDIR: "/usr/local/ssl" + +Caution: Many Operating Systems install OpenSSL by default. It is a common error +to not have the correct version of OpenSSL in your $PATH. Check that you are +running an OpenSSL 3.0 version like this: + + $ openssl version -v + OpenSSL 3.0.0-dev xx XXX xxxx (Library: OpenSSL 3.0.0-dev xx XXX xxxx) + +The OPENSSLDIR value above gives the directory name for where the default config +file is stored. So in this case the default config file will be called +`/usr/local/ssl/openssl.cnf` + +Edit the config file to add the following lines near the beginning: + + openssl_conf = openssl_init + + .include /usr/local/ssl/fipsmodule.cnf + + [openssl_init] + providers = provider_sect + + [provider_sect] + fips = fips_sect + base = base_sect + + [base_sect] + activate = 1 + +Obviously the include file location above should match the path and name of the +FIPS module config file that you installed earlier. +See L. + +Any applications that use OpenSSL 3.0 and are started after these changes are +made will start using only the FIPS module unless those applications take +explicit steps to avoid this default behaviour. Note that this configuration +also activates the "base" provider. The base provider does not include any +cryptographic algorithms (and therefore does not impact the validation status of +any cryptographic operations), but does include other supporting algorithms that +may be required. It is designed to be used in conjunction with the FIPS module. + +This approach has the primary advantage that it is simple, and no code changes +are required in applications in order to benefit from the FIPS module. There are +some disadvantages to this approach: + +=over 4 + +=item You may not want all applications to use the FIPS module. + +It may be the case that some applications should and some should not use the +FIPS module. + +=item If applications take explicit steps to not load the default config file or +set different settings. + +This method will not work for these cases. + +=item The algorithms available in the FIPS module are a subset of the algorithms +that are available in the default OpenSSL Provider. + +If any applications attempt to use any algorithms that are not present, +then they will fail. + +-=item Usage of certain deprecated APIs avoids the use of the FIPS module. + +If any applications use those APIs then the FIPS module will not be used. + +=back + +=head2 Selectively making applications use the FIPS module by default + +A variation on the above approach is to do the same thing on an individual +application basis. The default OpenSSL config file depends on the compiled in +value for OPENSSLDIR as described in the section above. However it is also +possible to override the config file to be used via the `OPENSSL_CONF` +environment variable. For example the following, on Unix, will cause the +application to be executed with a non-standard config file location: + + $ OPENSSL_CONF=/my/nondefault/openssl.cnf myapplication + +Using this mechanism you can control which config file is loaded (and hence +whether the FIPS module is loaded) on an application by application basis. + +This removes the disadvantage listed above that you may not want all +applications to use the FIPS module. All the other advantages and disadvantages +still apply. + +=head2 Programmatically loading the FIPS module (default library context) + +Applications may choose to load the FIPS provider explicitly rather than relying +on config to do this. The config file is still necessary in order to hold the +FIPS module config data (such as its self test status and integrity data). But +in this case we do not automatically activate the FIPS provider via that config +file. + +To do things this way configure as per +L above, but edit the +`fipsmodule.cnf` file to remove or comment out the line which says +`activate = 1` (note that setting this value to 0 is I sufficient). +This means all the required config information will be available to load the +FIPS module, but it is not automatically loaded when the application starts. The +FIPS provider can then be loaded programmatically like this: + + #include + + int main(void) + { + OSSL_PROVIDER *fips; + OSSL_PROVIDER *base; + + fips = OSSL_PROVIDER_load(NULL, "fips"); + if (fips == NULL) { + printf("Failed to load FIPS provider\n"); + exit(EXIT_FAILURE); + } + base = OSSL_PROVIDER_load(NULL, "base"); + if (base == NULL) { + OSSL_PROVIDER_unload(fips); + printf("Failed to load base provider\n"); + exit(EXIT_FAILURE); + } + + /* Rest of application */ + + OSSL_PROVIDER_unload(base); + OSSL_PROVIDER_unload(fips); + exit(EXIT_SUCCESS); + } + +Note that this should be one of the first things that you do in your +application. If any OpenSSL functions get called that require the use of +cryptographic functions before this occurs then, if no provider has yet been +loaded, then the default provider will be automatically loaded. If you then +later explicitly load the FIPS provider then you will have both the FIPS and the +default provider loaded at the same time. It is undefined which implementation +of an algorithm will be used if multiple implementations are available and you +have not explicitly specified via a property query (see below) which one should +be used. + +Also note that in this example we have additionally loaded the "base" provider. +This loads a sub-set of algorithms that are also available in the default +provider - specifically non cryptographic ones which may be used in conjunction +with the FIPS provider. For example this contains algorithms for encoding and +decoding keys. If you decide not to load the default provider then you +will usually want to load the base provider instead. + +In this example we are using the "default" library context. OpenSSL functions +operate within the scope of a library context. If no library context is +explicitly specified then the default library context is used. For further +details about library contexts see the L man page. + +=head2 Loading the FIPS module at the same time as other providers + +It is possible to have the FIPS provider and other providers (such as the +default provider) all loaded at the same time into the same library context. You +can use a property query string during algorithm fetches to specify which +implementation you would like to use. + +For example to fetch an implementation of SHA256 which conforms to FIPS +standards you can specify the property query `fips=yes` like this: + + EVP_MD *sha256; + + sha256 = EVP_MD_fetch(NULL, "SHA2-256", "fips=yes"); + +If no property query is specified, or more than one implementation matches the +property query then it is undefined which implementation of a particular +algorithm will be returned. + +This example shows an explicit request for an implementation of SHA256 from the +default provider: + + EVP_MD *sha256; + + sha256 = EVP_MD_fetch(NULL, "SHA2-256", "provider=default"); + +It is also possible to set a default property query string. The following +example sets the default property query of "fips=yes" for all fetches within the +default library context: + + EVP_set_default_properties(NULL, "fips=yes"); + +If a fetch function has both an explicit property query specified, and a +default property query is defined then the two queries are merged together and +both apply. The local property query overrides the default properties if the +same property name is specified in both. + +There are two important built-in properties that you should be aware of: + +The "provider" property enables you to specify which provider you want an +implementation to be fetched from, e.g. `provider=default` or `provider=fips`. +All algorithms implemented in a provider have this property set on them. + +There is also the `fips` property. All FIPS algorithms match against the +property query `fips=yes`. There are also some non-cryptographic algorithms +available in the default and base providers that also have the `fips=yes` +property defined for them. These are the encoder and decoder algorithms that +can (for example) be used to write out a key generated in the FIPS provider to a +file. The encoder and decoder algorithms are not in the FIPS module itself but +are allowed to be used in conjunction with the FIPS algorithms. + +It is possible to specify default properties within a config file. For example +the following config file automatically loads the default and fips providers and +sets the default property value to be `fips=yes`. Note that this config file +does not load the "base" provider. All supporting algorithms that are in "base" +are also in "default", so it is unnecessary in this case: + + openssl_conf = openssl_init + + .include /usr/local/ssl/fipsmodule.cnf + + [openssl_init] + providers = provider_sect + alg_section = algorithm_sect + + [provider_sect] + fips = fips_sect + default = default_sect + + [default_sect] + activate = 1 + + [algorithm_sect] + default_properties = fips=yes + +=head2 Programmatically loading the FIPS module (nondefault library context) + +In addition to using properties to separate usage of the FIPS module from other +usages this can also be achieved using library contexts. In this example we +create two library contexts. In one we assume the existence of a config file +called "openssl-fips.cnf" that automatically loads and configures the FIPS and +base providers. The other library context will just use the default provider. + + OSSL_LIB_CTX *fips_libctx, *nonfips_libctx; + OSSL_PROVIDER *defctxnull = NULL; + EVP_MD *fipssha256 = NULL, *nonfipssha256 = NULL; + int ret = 1; + + /* + * Create two nondefault library contexts. One for fips usage and one for + * non-fips usage + */ + fips_libctx = OSSL_LIB_CTX_new(); + nonfips_libctx = OSSL_LIB_CTX_new(); + if (fips_libctx == NULL || nonfips_libctx == NULL) + goto err; + + /* Prevent anything from using the default library context */ + defctxnull = OSSL_PROVIDER_load(NULL, "null"); + + /* + * Load config file for the FIPS library context. We assume that this + * config file will automatically activate the FIPS and base providers so we + * don't need to explicitly load them here. + */ + if (!OSSL_LIB_CTX_load_config(fips_libctx, "openssl-fips.cnf")) + goto err; + + /* + * We don't need to do anything special to load the default provider into + * nonfips_libctx. This happens automatically if no other providers are + * loaded. Because we don't call OSSL_LIB_CTX_load_config() explicitly for + * nonfips_libctx it will just use the default config file. + */ + + /* As an example get some digests */ + + /* Get a FIPS validated digest */ + fipssha256 = EVP_MD_fetch(fips_libctx, "SHA2-256", NULL); + if (fipssha256 == NULL) + goto err; + + /* Get a non-FIPS validated digest */ + nonfipssha256 = EVP_MD_fetch(nonfips_libctx, "SHA2-256", NULL); + if (nonfipssha256 == NULL) + goto err; + + /* Use the digests */ + + printf("Success\n"); + ret = 0; + + err: + EVP_MD_free(fipssha256); + EVP_MD_free(nonfipssha256); + OSSL_LIB_CTX_free(fips_libctx); + OSSL_LIB_CTX_free(nonfips_libctx); + OSSL_PROVIDER_unload(defctxnull); + + return ret; + +Note that we have made use of the special "null" provider here which we load +into the default library context. We could have chosen to use the default +library context for FIPS usage, and just create one additional library context +for other usages - or vice versa. However if code has not been converted to use +library contexts then the default library context will be automatically used. +This could be the case for your own existing applications as well as certain +parts of OpenSSL itself. Not all parts of OpenSSL are library context aware. If +this happens then you could "accidentally" use the wrong library context for a +particular operation. To be sure this doesn't happen you can load the "null" +provider into the default library context. Because a provider has been +explicitly loaded, the default provider will not automatically load. This means +code using the default context by accident will fail because no algorithms will +be available. + +See L for additional information about the +Library Context. + +=head2 Using Encoders and Decoders with the FIPS module + +Encoders and decoders are used to read and write keys or parameters from or to +some external format (for example a PEM file). If your application generates +keys or parameters that then need to be written into PEM or DER format +then it is likely that you will need to use an encoder to do this. Similarly +you need a decoder to read previously saved keys and parameters. In most cases +this will be invisible to you if you are using APIs that existed in +OpenSSL 1.1.1 or earlier such as L. However the appropriate +encoder/decoder will need to be available in the library context associated with +the key or parameter object. The built-in OpenSSL encoders and decoders are +implemented in both the default and base providers and are not in the FIPS +module boundary. However since they are not cryptographic algorithms themselves +it is still possible to use them in conjunction with the FIPS module, and +therefore these encoders/decoders have the "fips=yes" property against them. +You should ensure that either the default or base provider is loaded into the +library context in this case. + +=head2 Using the FIPS module in SSL/TLS + +Writing an application that uses libssl in conjunction with the FIPS module is +much the same as writing a normal libssl application. If you are using global +properties and the default library context to specify usage of FIPS validated +algorithms then this will happen automatically for all cryptographic algorithms +in libssl. If you are using a nondefault library context to load the FIPS +provider then you can supply this to libssl using the function +L. This works as a drop in replacement for the function +L except it provides you with the capability to specify the +library context to be used. You can also use the same function to specify +libssl specific properties to use. + +In this first example we create two SSL_CTX objects using two different library +contexts. + + /* + * We assume that a nondefault library context with the FIPS provider + * loaded has been created called fips_libctx. + / + SSL_CTX *fips_ssl_ctx = SSL_CTX_new_ex(fips_libctx, NULL, TLS_method()); + /* + * We assume that a nondefault library context with the default provider + * loaded has been created called non_fips_libctx. + */ + SSL_CTX *non_fips_ssl_ctx = SSL_CTX_new_ex(non_fips_libctx, NULL, + TLS_method()); + +In this second example we create two SSL_CTX objects using different properties +to specify FIPS usage: + + /* + * The "fips=yes" property includes all FIPS approved algorithms as well as + * encoders from the default provider that are allowed to be used. The NULL + * below indicates that we are using the default library context. + */ + SSL_CTX *fips_ssl_ctx = SSL_CTX_new_ex(NULL, "fips=yes", TLS_method()); + /* + * The "provider!=fips" property allows algorithms from any provider except + * the FIPS provider + */ + SSL_CTX *non_fips_ssl_ctx = SSL_CTX_new_ex(NULL, "provider!=fips", + TLS_method()); + +=head2 Confirming that an algorithm is being provided by the FIPS module + +A chain of links needs to be followed to go from an algorithm instance to the +provider that implements it. The process is similar for all algorithms. Here the +example of a digest is used. + +To go from an B to an B, use L . +To go from the B to its B, use L. +To extract the name from the B, use L. + +=head1 SEE ALSO + +L, +L + +=head1 COPYRIGHT + +Copyright 2021 The OpenSSL Project Authors. All Rights Reserved. + +Licensed under the Apache License 2.0 (the "License"). You may not use +this file except in compliance with the License. You can obtain a copy +in the file LICENSE in the source distribution or at +L. + +=cut diff --git a/doc/man7/migration_guide.pod b/doc/man7/migration_guide.pod new file mode 100644 index 0000000000..58260860de --- /dev/null +++ b/doc/man7/migration_guide.pod @@ -0,0 +1,1804 @@ +=pod + +=head1 NAME + +migration_guide - OpenSSL migration guide + +=head1 SYNOPSIS + +See the individual manual pages for details. + +=head1 DESCRIPTION + +This guide details the changes required to migrate to new versions of OpenSSL. +Currently this covers OpenSSL 3.0. For earlier versions refer to +L. +For an overview of some of the key concepts introduced in OpenSSL 3.0 see +L. + +=head1 OPENSSL 3_0 + +=head2 Main Changes from OpenSSL 1.1.1 + +=head3 Major Release + +OpenSSL 3.0 is a major release and consequently any application that currently +uses an older version of OpenSSL will at the very least need to be recompiled in +order to work with the new version. It is the intention that the large majority +of applications will work unchanged with OpenSSL 3.0 if those applications +previously worked with OpenSSL 1.1.1. However this is not guaranteed and some +changes may be required in some cases. Changes may also be required if +applications need to take advantage of some of the new features available in +OpenSSL 3.0 such as the availability of the FIPS module. + +=head3 License Change + +In previous versions, OpenSSL was licensed under the L +(both licenses apply). From OpenSSL 3.0 this is replaced by the +L. + +=head3 Providers and FIPS support + +One of the key changes from OpenSSL 1.1.1 is the introduction of the Provider +concept. Providers collect together and make available algorithm implementations. +With OpenSSL 3.0 it is possible to specify, either programmatically or via a +config file, which providers you want to use for any given application. +OpenSSL 3.0 comes with 5 different providers as standard. Over time third +parties may distribute additional providers that can be plugged into OpenSSL. +All algorithm implementations available via providers are accessed through the +"high level" APIs (for example those functions prefixed with "EVP"). They cannot +be accessed using the L. +One of the standard providers available is the FIPS provider. This makes +available FIPS validated cryptographic algorithms. +The FIPS provider is disabled by default and needs to be enabled explicitly +at configuration time using the `enable-fips` option. If it is enabled, +the FIPS provider gets built and installed in addition to the other standard +providers. No separate installation procedure is necessary. +There is however a dedicated `install_fips` make target, which serves the +special purpose of installing only the FIPS provider into an existing +OpenSSL installation. + +See also L for information on the legacy provider. + +See also L and +L. + +=head3 Low Level APIs + +OpenSSL has historically provided two sets of APIs for invoking cryptographic +algorithms: the "high level" APIs (such as the "EVP" APIs) and the "low level" +APIs. The high level APIs are typically designed to work across all algorithm +types. The "low level" APIs are targeted at a specific algorithm implementation. +For example, the EVP APIs provide the functions L, +L and L to perform symmetric +encryption. Those functions can be used with the algorithms AES, CHACHA, 3DES etc. +On the other hand, to do AES encryption using the low level APIs you would have +to call AES specific functions such as L, +L, and so on. The functions for 3DES are different. +Use of the low level APIs has been informally discouraged by the OpenSSL +development team for a long time. However in OpenSSL 3.0 this is made more +formal. All such low level APIs have been deprecated. You may still use them in +your applications, but you may start to see deprecation warnings during +compilation (dependent on compiler support for this). Deprecated APIs may be +removed from future versions of OpenSSL so you are strongly encouraged to update +your code to use the high level APIs instead. + +This is described in more detail in L + +=head3 Legacy Algorithms + +Some cryptographic algorithms such as B and B that were available via +the EVP APIs are now considered legacy and their use is strongly discouraged. +These legacy EVP algorithms are still available in OpenSSL 3.0 but not by +default. If you want to use them then you must load the legacy provider. +This can be as simple as a config file change, or can be done programmatically. +See L for a complete list of algorithms. +Applications using the EVP APIs to access these algorithms should instead use +more modern algorithms. If that is not possible then these applications +should ensure that the legacy provider has been loaded. This can be achieved +either programmatically or via configuration. See L man page for +more information about providers. + +=head3 Engines and "METHOD" APIs + +The refactoring to support Providers conflicts internally with the APIs used to +support engines, including the ENGINE API and any function that creates or +modifies custom "METHODS" (for example L, +L, L, L, +L, etc.). These functions are being deprecated in +OpenSSL 3.0, and users of these APIs should know that their use can likely +bypass provider selection and configuration, with unintended consequences. +This is particularly relevant for applications written to use the OpenSSL 3.0 +FIPS module, as detailed below. Authors and maintainers of external engines are +strongly encouraged to refactor their code transforming engines into providers +using the new Provider API and avoiding deprecated methods. + +=head3 Versioning Scheme + +The OpenSSL versioning scheme has changed with the OpenSSL 3.0 release. The new +versioning scheme has this format: + +MAJOR.MINOR.PATCH + +For OpenSSL 1.1.1 and below, different patch levels were indicated by a letter +at the end of the release version number. This will no longer be used and +instead the patch level is indicated by the final number in the version. A +change in the second (MINOR) number indicates that new features may have been +added. OpenSSL versions with the same major number are API and ABI compatible. +If the major number changes then API and ABI compatibility is not guaranteed. + +=head3 Other major new features + +=head4 Certificate Management Protocol (CMP, RFC 4210) + +This also covers CRMF (RFC 4211) and HTTP transfer (RFC 6712) +See L and L as starting points. + +=head4 HTTP(S) client + +A proper HTTP(S) client that supports GET and POST, redirection, plain and +ASN.1-encoded contents, proxies, and timeouts. + +=head4 Key Derivation Function API (EVP_KDF) + +This simplifies the process of adding new KDF and PRF implementations. + +Previously KDF algorithms had been shoe-horned into using the EVP_PKEY object +which was not a logical mapping. +Existing applications that use KDF algorithms using EVP_PKEY +(scrypt, TLS1 PRF and HKDF) may be slower as they use an EVP_KDF bridge +internally. +All new applications should use the new L interface. +See also L and +L. + +=head4 Message Authentication Code API (EVP_MAC) + +This simplifies the process of adding MAC implementations. + +This includes a generic EVP_PKEY to EVP_MAC bridge, to facilitate the continued +use of MACs through raw private keys in functionality such as +L and L. + +All new applications should use the new L interface. +See also L +and L. + +=head4 Support for Linux Kernel TLS + +In order to use KTLS, support for it must be compiled in using the 'enable-ktls' +compile time option. It must also be enabled at run time using the +B option. + +=head4 New Algorithms + +=over 4 + +=item KDF algorithms "SINGLE STEP" and "SSH" + +See L and L + +=item MAC Algorithms "GMAC" and "KMAC" + +See L and L. + +=item KEM Algorithm "RSASVE" + +See L. + +=item Cipher Algorithm "AES-SIV" + +See L. + +=item AES Key Wrap inverse ciphers supported by EVP layer. + +The inverse ciphers use AES decryption for wrapping, and AES encryption for +unwrapping. The algorithms are: "AES-128-WRAP-INV", "AES-192-WRAP-INV", +"AES-256-WRAP-INV", "AES-128-WRAP-PAD-INV", "AES-192-WRAP-PAD-INV" and +"AES-256-WRAP-PAD-INV". + +=item AES CTS cipher added to EVP layer. + +The algorithms are "AES-128-CBC-CTS", "AES-192-CBC-CTS" and "AES-256-CBC-CTS". +CS1, CS2 and CS3 variants are supported. + +=back + +=head4 CMS and PKCS#7 updates + +=over 4 + +=item Added CAdES-BES signature verification support. + +=item Added CAdES-BES signature scheme and attributes support (RFC 5126) to CMS API. + +=item Added AuthEnvelopedData content type structure (RFC 5083) using AES_GCM + +This uses the AES-GCM parameter (RFC 5084) for the Cryptographic Message Syntax. +Its purpose is to support encryption and decryption of a digital envelope that +is both authenticated and encrypted using AES GCM mode. + +=item L and L were made public. + +=back + +=head4 PKCS#12 API updates + +The default algorithms for pkcs12 creation with the PKCS12_create() function +were changed to more modern PBKDF2 and AES based algorithms. The default +MAC iteration count was changed to PKCS12_DEFAULT_ITER to make it equal +with the password-based encryption iteration count. The default digest +algorithm for the MAC computation was changed to SHA-256. The pkcs12 +application now supports -legacy option that restores the previous +default algorithms to support interoperability with legacy systems. + +Added enhanced PKCS#12 APIs which accept a library context `OSSL_LIB_CTX` +and (where relevant) a property query. Other APIs which handle PKCS#7 and +PKCS#8 objects have also been enhanced where required. This includes: + +L, L, L, +L, L, L, +L, L, +L, L, L, +L, L, L, +L, L, +L, L, L, +L, L, +L, L, L. + +As part of this change the EVP_PBE_xxx APIs can also accept a library +context and property query and will call an extended version of the key/IV +derivation function which supports these parameters. This includes +L, L and L. + +=head4 Windows thread synchronization changes + +Windows thread synchronization uses read/write primitives (SRWLock) when +supported by the OS, otherwise CriticalSection continues to be used. + +=head4 Trace API + +A new generic trace API has been added which provides support for enabling +instrumentation through trace output. This feature is mainly intended as an aid +for developers and is disabled by default. To utilize it, OpenSSL needs to be +configured with the `enable-trace` option. + +If the tracing API is enabled, the application can activate trace output by +registering BIOs as trace channels for a number of tracing and debugging +categories. See L. + +=head4 Key validation updates + +L and L now work for +more key types. This includes RSA, DSA, ED25519, X25519, ED448 and X448. +Previously (in 1.1.1) they would return -2. For key types that do not have +parameters then L will always return 1. + +=head3 Other notable deprecations and changes + +=head4 The function code part of an OpenSSL error code is no longer relevant + +This code is now always set to zero. Related functions are deprecated. + +=head4 STACK and HASH macro's have been cleaned up + +The type-safe wrappers are declared everywhere and implemented once. +See L and L. + +=head4 The RAND_DRBG subsystem has been removed + +The new L is a partial replacement: the DRBG callback framework is +absent. The RAND_DRBG API did not fit well into the new provider concept as +implemented by EVP_RAND and EVP_RAND_CTX. + +=head4 Removed FIPS_mode() and FIPS_mode_set() + +These functions are legacy APIs that are not applicable to the new provider +model. Applications should instead use +L and +L. + +=head4 Key generation is slower + +The Miller-Rabin test now uses 64 rounds, which is used for all prime generation, +including RSA key generation. This affects the time for larger keys sizes. + +The default key generation method for the regular 2-prime RSA keys was changed +to the FIPS 186-4 B.3.6 method (Generation of Probable Primes with Conditions +Based on Auxiliary Probable Primes). This method is slower than the original +method. + +=head4 Change PBKDF2 to conform to SP800-132 instead of the older PKCS5 RFC2898 + +This checks that the salt length is at least 128 bits, the derived key length is +at least 112 bits, and that the iteration count is at least 1000. +For backwards compatibility these checks are disabled by default in the +default provider, but are enabled by default in the fips provider. + +To enable or disable the checks see B in +L. The parameter can be set using L. + +=head4 Enforce a minimum DH modulus size of 512 bits + +Smaller sizes now result in an error. + +=head4 SM2 key changes + +EC EVP_PKEYs with the SM2 curve have been reworked to automatically become +EVP_PKEY_SM2 rather than EVP_PKEY_EC. + +Unlike in previous OpenSSL versions, this means that applications cannot +call `EVP_PKEY_set_alias_type(pkey, EVP_PKEY_SM2)` to get SM2 computations. + +Parameter and key generation is also reworked to make it possible +to generate EVP_PKEY_SM2 parameters and keys. Applications must now generate +SM2 keys directly and must not create an EVP_PKEY_EC key first. + +Validation of SM2 keys has been separated from the validation of regular EC +keys, allowing to improve the SM2 validation process to reject loaded private +keys that are not conforming to the SM2 ISO standard. +In particular, a private scalar `k` outside the range `1 <= k < n-1` is now +correctly rejected. + +=head4 EVP_PKEY_set_alias_type() method has been removed + +This function made a B object mutable after it had been set up. In +OpenSSL 3.0 it was decided that a provided key should not be able to change its +type, so this function has been removed. + +=head4 Functions that return an internal key should be treated as read only + +Functions such as L behave slightly differently in +OpenSSL 3.0. Previously they returned a pointer to the low-level key used +internally by libcrypto. From OpenSSL 3.0 this key may now be held in a +provider. Calling these functions will only return a handle on the internal key +where the EVP_PKEY was constructed using this key in the first place, for +example using a function or macro such as L, +L, etc. +Where the EVP_PKEY holds a provider managed key, then these functions now return +a cached copy of the key. Changes to the internal provider key that take place +after the first time the cached key is accessed will not be reflected back in +the cached copy. Similarly any changes made to the cached copy by application +code will not be reflected back in the internal provider key. + +For the above reasons the keys returned from these functions should typically be +treated as read-only. To emphasise this the value returned from +L, L, L and +L have been made const. This may break some existing code. +Applications broken by this change should be modified. The preferred solution is +to refactor the code to avoid the use of these deprecated functions. Failing +this the code should be modified to use a const pointer instead. +The L, L, L +and L functions continue to return a non-const pointer to +enable them to be "freed". However they should also be treated as read-only. + +=head4 The public key check has moved from EVP_PKEY_derive() to EVP_PKEY_derive_set_peer() + +This may mean result in an error in L rather than +during L. +To disable this check use EVP_PKEY_derive_set_peer_ex(dh, peer, 0). + +=head4 The print format has cosmetic changes for some functions + +The output from numerous "printing" functions such as L, +L, L, and other similar functions has been +amended such that there may be cosmetic differences between the output +observed in 1.1.1 and 3.0. This also applies to the "-text" output from the +x509 and crl applications. + +=head4 Interactive mode from the `openssl` program has been removed + +From now on, running it without arguments is equivalent to `openssl help`. + +=head4 The error return values from some control calls (ctrl) have changed + +One significant change is that controls which used to return -2 for +invalid inputs, now return -1 indicating a generic error condition instead. + +=head4 DH and DHX key types have different settable parameters + +Previously (in 1.1.1) these conflicting parameters were allowed, but will now +result in errors. See L for further details. This affects the +behaviour of L for DH parameter generation. + +=head2 Installation and Compilation + +Please refer to the INSTALL.md file in the top of the distribution for +instructions on how to build and install OpenSSL 3.0. Please also refer to the +various platform specific NOTES files for your specific platform. + +=head2 Upgrading from OpenSSL 1.1.1 + +Upgrading to OpenSSL 3.0 from OpenSSL 1.1.1 should be relatively straight +forward in most cases. The most likely area where you will encounter problems +is if you have used low level APIs in your code (as discussed above). In that +case you are likely to start seeing deprecation warnings when compiling your +application. If this happens you have 3 options: + +=over 4 + +=item 1) Ignore the warnings. They are just warnings. The deprecated functions are still present and you may still use them. However be aware that they may be removed from a future version of OpenSSL. + +=item 2) Suppress the warnings. Refer to your compiler documentation on how to do this. + +=item 3) Remove your usage of the low level APIs. In this case you will need to rewrite your code to use the high level APIs instead + +=back + +=head2 Upgrading from OpenSSL 1.0.2 + +Upgrading to OpenSSL 3.0 from OpenSSL 1.0.2 is likely to be significantly more +difficult. In addition to the issues discussed above in the section about +L, the main things to be aware of are: + +=over 4 + +=item 1) The build and installation procedure has changed significantly. + +Check the file INSTALL.md in the top of the installation for instructions on how +to build and install OpenSSL for your platform. Also read the various NOTES +files in the same directory, as applicable for your platform. + +=item 2) Many structures have been made opaque in OpenSSL 3.0. + +The structure definitions have been removed from the public header files and +moved to internal header files. In practice this means that you can no longer +stack allocate some structures. Instead they must be heap allocated through some +function call (typically those function names have a `_new` suffix to them). +Additionally you must use "setter" or "getter" functions to access the fields +within those structures. + +For example code that previously looked like this: + + EVP_MD_CTX md_ctx; + + /* This line will now generate compiler errors */ + EVP_MD_CTX_init(&md_ctx); + + The code needs to be amended to look like this: + EVP_MD_CTX *md_ctx; + + md_ctx = EVP_MD_CTX_new(); + ... + ... + EVP_MD_CTX_free(md_ctx); + +=item 3) Support for TLSv1.3 has been added. + +This has a number of implications for SSL/TLS applications. See the +L for further details. + +=back + +More details about the breaking changes between OpenSSL versions 1.0.2 and 1.1.0 +can be found on the +L. + +=head3 Upgrading from the OpenSSL 2.0 FIPS Object Module + +The OpenSSL 2.0 FIPS Object Module was a separate download that had to be built +separately and then integrated into your main OpenSSL 1.0.2 build. +In OpenSSL 3.0 the FIPS support is fully integrated into the mainline version of +OpenSSL and is no longer a separate download. For further information see +L. + +The function calls 'FIPS_mode()' and 'FIPS_mode_set()' have been removed +from OpenSSL 3.0. You should rewrite your application to not use them. +See L and L for details. + +=head2 Completing the installation of the FIPS Module + +The FIPS Module will be built and installed automatically if FIPS support has +been configured. The current documentation can be found in the +L file. + +=head2 Programming + +Applications written to work with OpenSSL 1.1.1 will mostly just work with +OpenSSL 3.0. However changes will be required if you want to take advantage of +some of the new features that OpenSSL 3.0 makes available. In order to do that +you need to understand some new concepts introduced in OpenSSL 3.0. +Read L for further information. + +=head3 Library Context + +A library context allows different components of a complex application to each +use a different library context and have different providers loaded with +different configuration settings. +See L for further info. + +If the user creates an B via L then many +functions may need to be changed to pass additional parameters to handle the +library context. + +=head4 Using a Library Context - Old functions that should be changed + +If a library context is needed then all EVP_* digest functions that return a +B such as EVP_sha256() should be replaced with a call to +L. See L. + +If a library context is needed then all EVP_* cipher functions that return a +B such as EVP_aes_128_cbc() should be replaced vith a call to +L. See L. + +Some functions can be passed an object that has already been set up with a library +context such as L, L and L. +If NULL is passed instead then the created object will be set up with the +default library context. Use L, L and +L if a library context is required. + +All functions listed below with a I have a replacment function I +that takes B as an additional argument. Functions that have other +mappings are listed along with the respective name. + +=over 4 + +=item L and L + +=item L and L + +=item L, L, L, +L, L, L, +L, L and L + +=item L + +=item L, L and L + +=item L + +=item L, L and L + +=item L and L + +Use L and L + +=item L + +Use L or L. + +=item L and L + +=item L, L and L + +=item L + +=item L + +Use L + +=item L, L +and L + +=item L and L + +=item L + +=item L and L + +=item L + +=item L + +=item L, L, L, +L and L + +=item L, L, L +and L + +=item L and L + +=item L, L, L, +L, L, L, L, +L, L, L, +L, L, L, +L, L + +=item L, L, L, +L and L + +=item L, L and L + +=item L, L and L + +=item L and L + +=item L + +=item L + +=item L + +=item L and L + +=item L and L + +=item L + +=item L + +=item L and L + +=item L, L, L, +L and L + +=back + +=head4 New functions that use a Library context + +The following functions can be passed a library context if required. +Passing NULL will use the default library context. + +=over 4 + +=item L and L + +=item L and L + +=item L and +L + +=item L and L + +=item L and L + +=item L and L + +=item L and L + +=item L and L + +=item L and L + +=item L + +=item L + +=item L and L + +=item L and L + +=item L + +=item L and L + +=item L and L + +=item L + +=item L and L + +=item L and L + +=item L and L + +=item L and L + +=item L + +=item L and L + +=item L, L and L + +=item L, L, +L, L, +L and L + +=item L and L + +=item L + +=item L and L + +=item L, L, L, +L and L + +=back + +=head3 Providers + +Providers are described in detail here L. +See also L. + +=head3 Fetching algorithms and property queries + +Implicit and Explicit Fetching is described in detail here +L. + +=head3 Deprecation of Low Level Functions + +A significant number of APIs have been deprecated in OpenSSL 3.0. +This section describes some common categories of deprecations. +See L for the list of deprecated functions +that refer to these categories. + +=head4 Providers are a replacement for engines and low-level method overrides + +Any accessor that uses an ENGINE is deprecated (such as EVP_PKEY_set1_engine()). +Applications using engines should instead use providers. + +Before providers were added algorithms were overriden by changing the methods +used by algorithms. All these methods such as RSA_new_method() and RSA_meth_new() +are now deprecated and can be replaced by using providers instead. + +=head4 Deprecated i2d and d2i functions for low-level key types + +Any i2d and d2i functions such as d2i_DHparams() that take a low-level key type +have been deprecated. Applications should instead use the L and +L APIs to read and write files. +See L for further details. + +=head4 Deprecated low-level key object getters and setters + +Applications that set or get low-level key objects (such as EVP_PKEY_set1_DH() +or EVP_PKEY_get0()) should instead use the OSSL_ENCODER +(See L) or OSSL_DECODER (See L) +APIs, or alternatively use L or L. + +=head4 Deprecated low-level key parameter getters + +Functions that access low-level objects directly such as L are now +deprecated. Applications should use one of L, +L, l, +L, L or +L to access fields from an EVP_PKEY. +Gettable parameters are listed in L, +L, L, +L, L and +L. +Applications may also use L to return all fields. + +=head4 Deprecated low-level key parameter setters + +Functions that access low-level objects directly such as L +are now deprecated. Applications should use L to create +new keys from user provided key data. Keys should be immutable once they are +created, so if required the user may use L, L, +and L to create a modified key. +See L for more information. +See L for information on +generating a key using parameters. + +=head4 Deprecated low-level object creation + +Low-level objects were created using methods such as L, +L and L. Applications should instead use the +high-level EVP_PKEY APIs, e.g. L, L and +L. +See also L and L. + +EVP_PKEY's may be created in a variety of ways: +See also L, +L and +L. + +=head4 Deprecated low-level encryption functions + +Low-level encryption functions such as L and L +have been informally discouraged from use for a long time. Applications should +instead use the high level EVP APIs L, +L, and L or +L, L and L. + +=head4 Deprecated low-level digest functions + +Use of low-level digest functions such as L have been +informally discouraged from use for a long time. Applications should instead +use the the high level EVP APIs L, L +and L, or the quick one-shot L. + +Note that the functions L, L, L, L +and L have changed to macros that use L. + +=head4 Deprecated low-level signing functions + +Use of low-level signing functions such as L have been +informally discouraged for a long time. Instead applications should use +L and L. +See also L, L, +L and L. + +=head4 Deprecated low-level MAC functions + +Low-level mac functions such as L are deprecated. +Applications should instead use the new L interface, using +L, L, L, +L and L or the single-shot MAC function +L. +See L, L, L, L, +L, L, L and +L for additional information. + +Note that the one-shot method HMAC() is still available for compatability purposes. + +=head4 Deprecated low-level validation functions + +Low-level validation functions such as L have been informally +discouraged from use for a long time. Applications should instead use the high-level +EVP_PKEY APIs such as L, L, +L, L, +L, L, +and L. + +=head4 Deprecated low-level key exchange functions + +Many low-level functions have been informally discouraged from use for a long +time. Applications should instead use L. +See L, L and L. + +=head4 Deprecated low-level key generation functions + +Many low-level functions have been informally discouraged from use for a long +time. Applications should instead use L and +L as described in L, L, +L, L and L. +The 'quick' one-shot function L and macros for the most +common cases: and L may also be used. + +=head4 Deprecated low-level key reading and writing functions + +Use of low-level objects (such as DSA) has been informally discouraged from use +for a long time. Functions to read and write these low-level objects (such as +PEM_read_DSA_PUBKEY()) should be replaced. Applications should instead use +L and L. + +=head4 Deprecated low-level key printing functions + +Use of low-level objects (such as DSA) has been informally discouraged from use +for a long time. Functions to print these low-level objects such as +DSA_print() should be replaced with the equivalent EVP_PKEY functions. +Application should use one of L, +L, L, +L, L or +L. Note that internally these use +L and L. + +=head3 Deprecated function mappings + +The following functions have been deprecated in 3.0. + +=over 4 + +=item AES_bi_ige_encrypt and AES_ige_encrypt + +There is no replacement for the IGE functions. New code should not use these modes. +These undocumented functions were never integrated into the EVP layer. +They implemented the AES Infinite Garble Extension (IGE) mode and AES +Bi-directional IGE mode. These modes were never formally standardised and +usage of these functions is believed to be very small. In particular +AES_bi_ige_encrypt() has a known bug. It accepts 2 AES keys, but only one +is ever used. The security implications are believed to be minimal, but +this issue was never fixed for backwards compatibility reasons. + +=item AES_encrypt, AES_decrypt, AES_set_encrypt_key, AES_set_decrypt_key, +AES_cbc_encrypt, AES_cfb128_encrypt, AES_cfb1_encrypt, AES_cfb8_encrypt, +AES_ecb_encrypt and AES_ofb128_encrypt + +=item AES_unwrap_key, AES_wrap_key + +See L + +=item AES_options + +There is no replacement. It returned a string indicating if the AES code was unrolled. + +=item ASN1_digest, ASN1_sign and ASN1_verify + +There are no replacements. These old functions are not used, and could be +disabled with the macro NO_ASN1_OLD since OpenSSL 0.9.7. + +=item ASN1_STRING_length_set + +Use L or L instead. +This was a potentially unsafe function that could change the bounds of a +previously passed in pointer. + +=item BF_encrypt, BF_decrypt, BF_set_key, BF_cbc_encrypt, BF_cfb64_encrypt, +BF_ecb_encrypt and BF_ofb64_encrypt + +See L. +The Blowfish algorithm has been moved to the L. + +=item BF_options + +There is no replacement. This option returned a constant string. + +=item BN_is_prime_ex and BN_is_prime_fasttest_ex + +Use L which that avoids possible misuse and always uses at least +64 rounds of the Miller-Rabin primality test. + +=item BN_pseudo_rand and BN_pseudo_rand_range + +Use L and L. + +=item BN_X931_derive_prime_ex, BN_X931_generate_prime_ex and BN_X931_generate_Xpq + +There are no replacements for these low-level functions. They were used internally +by RSA_X931_derive_ex() and RSA_X931_generate_key_ex() which are also deprecated. +Use L instead. + +=item Camellia_encrypt, Camellia_decrypt, Camellia_set_key, +Camellia_cbc_encrypt, Camellia_cfb128_encrypt, Camellia_cfb1_encrypt, +Camellia_cfb8_encrypt, Camellia_ctr128_encrypt, Camellia_ecb_encrypt and +Camellia_ofb128_encrypt. + +See L. + +=item CAST_encrypt, CAST_decrypt, CAST_set_key, CAST_cbc_encrypt, +CAST_cfb64_encrypt, CAST_ecb_encrypt and CAST_ofb64_encrypt + +See L. +The CAST algorithm has been moved to the L. + +=item CMAC_CTX_new, CMAC_CTX_cleanup, CMAC_CTX_copy, CMAC_CTX_free and +CMAC_CTX_get0_cipher_ctx + +See L. + +=item CMAC_Init, CMAC_Update, CMAC_Final and CMAC_resume. + +See L. + +=item CRYPTO_mem_ctrl, CRYPTO_mem_debug_free, CRYPTO_mem_debug_malloc, +CRYPTO_mem_debug_pop, CRYPTO_mem_debug_push, CRYPTO_mem_debug_realloc, +CRYPTO_mem_leaks, CRYPTO_mem_leaks_cb, CRYPTO_mem_leaks_fp and +CRYPTO_set_mem_debug + +Memory-leak checking has been deprecated in favor of more modern development +tools, such as compiler memory and leak sanitizers or Valgrind. + +=item d2i_DHparams, d2i_DHxparams, d2i_DSAparams, d2i_DSAPrivateKey, +d2i_DSAPrivateKey_bio, d2i_DSAPrivateKey_fp, d2i_DSA_PUBKEY, d2i_DSA_PUBKEY_bio, +d2i_DSA_PUBKEY_fp, d2i_DSAPublicKey, +d2i_ECParameters, d2i_ECPrivateKey, d2i_ECPrivateKey_bio, d2i_ECPrivateKey_fp, +d2i_EC_PUBKEY, d2i_EC_PUBKEY_bio, d2i_EC_PUBKEY_fp, o2i_ECPublicKey, +d2i_RSAPrivateKey, d2i_RSAPrivateKey_bio, d2i_RSAPrivateKey_fp, +d2i_RSA_PUBKEY, d2i_RSA_PUBKEY_bio, d2i_RSA_PUBKEY_fp, d2i_RSAPublicKey, +d2i_RSAPublicKey_bio and d2i_RSAPublicKey_fp + +See L + +=item DES_crypt, DES_fcrypt, DES_encrypt1, DES_encrypt2, DES_encrypt3, +DES_decrypt3, DES_ede3_cbc_encrypt, DES_ede3_cfb64_encrypt, +DES_ede3_cfb_encrypt,DES_ede3_ofb64_encrypt, +DES_ecb_encrypt, DES_ecb3_encrypt, DES_ofb64_encrypt, DES_ofb_encrypt, +DES_cfb64_encrypt DES_cfb_encrypt, DES_cbc_encrypt, DES_ncbc_encrypt, +DES_pcbc_encrypt, DES_xcbc_encrypt, DES_cbc_cksum, DES_quad_cksum, +DES_check_key_parity, DES_is_weak_key, DES_key_sched, DES_options, +DES_random_key, DES_set_key, DES_set_key_checked, DES_set_key_unchecked, +DES_set_odd_parity, DES_string_to_2keys, DES_string_to_key + +See L. +Algorithms for "DESX-CBC", "DES-ECB", "DES-CBC", "DES-OFB", "DES-CFB", +"DES-CFB1" and "DES-CFB8" have been moved to the L. + +=item DH_bits, DH_security_bits and DH_size + +Use L, L and L. + +=item DH_check, DH_check_ex, DH_check_params, DH_check_params_ex, +DH_check_pub_key and DH_check_pub_key_ex + +See L + +=item DH_clear_flags, DH_test_flags and DH_set_flags + +The DH_FLAG_CACHE_MONT_P flag has been deprecated without replacement. +The DH_FLAG_TYPE_DH and DH_FLAG_TYPE_DHX have been deprecated. +Use EVP_PKEY_is_a() to determine the type of a key. +There is no replacement for setting these flags. + +=item DH_compute_key and DH_compute_key_padded + +See L. + +=item DH_new, DH_new_by_nid, DH_free, DH_up_ref + +See L + +=item DH_generate_key and DH_generate_parameters_ex + +See L. + +=item DH_get0_pqg, DH_get0_p, DH_get0_q, DH_get0_g, DH_get0_key, +DH_get0_priv_key, DH_get0_pub_key, DH_get_length and DH_get_nid + +See L + +=item DH_get_1024_160, DH_get_2048_224 and DH_get_2048_256 + +Applications should instead set the B as specified in +L) to one of "dh_1024_160", "dh_2048_224" or +"dh_2048_256" when generating a DH key. + +=item DH_KDF_X9_42 + +Applications should use L instead. + +=item DH_get_default_method, DH_get0_engine, DH_meth_*, DH_new_method, DH_OpenSSL, +DH_get_ex_data, DH_set_default_method, DH_set_method and DH_set_ex_data + +See L + +=item DHparams_print and DHparams_print_fp + +See L + +=item DH_set0_key, DH_set0_pqg, DH_set_length + +See L + +=item DSA_bits, DSA_security_bits and DSA_size + +Use L, L and L. + +=item DHparams_dup, DSA_dup_DH + +There is no direct replacement. Applications may use L +and L instead. + +=item DSA_generate_key and DSA_generate_parameters_ex + +See L. + +=item DSA_get0_engine, DSA_get_default_method, DSA_get_ex_data, DSA_get_method, +DSA_meth_*, DSA_new_method, DSA_OpenSSL, DSA_set_default_method, DSA_set_ex_data +and DSA_set_method + +See L. + +=item DSA_get0_p, DSA_get0_q, DSA_get0_g, DSA_get0_pqg, DSA_get0_key, +DSA_get0_priv_key and DSA_get0_pub_key + +See L. + +=item DSA_new, DSA_free, DSA_up_ref + +See L + +=item DSAparams_dup + +There is no direct replacement. Applications may use L +and L instead. + +=item DSAparams_print, DSAparams_print_fp, DSA_print and DSA_print_fp + +See L + +=item DSA_set0_key, DSA_set0_pqg + +See L + +=item DSA_set_flags, DSA_clear_flags, DSA_test_flags + +The DSA_FLAG_CACHE_MONT_P flag has been deprecated without replacement. + +=item DSA_sign, DSA_do_sign, DSA_sign_setup, DSA_verify and DSA_do_verify + +See L. + +=item ECDH_compute_key + +See L. + +=item ECDH_KDF_X9_62 + +Applications may either set this using the helper function +L or by setting an B using the +"kdf-type" as shown in L + +=item ECDSA_sign, ECDSA_sign_ex, ECDSA_sign_setup, ECDSA_do_sign, ECDSA_do_sign_ex, +ECDSA_verify and ECDSA_do_verify + +See L. + +=item ECDSA_size + +Applications should use L. + +=item EC_GF2m_simple_method, EC_GFp_mont_method, EC_GFp_nist_method, +EC_GFp_nistp224_method, EC_GFp_nistp256_method, EC_GFp_nistp521_method and +EC_GFp_simple_method + +There are no replacements for these functions. Applications should rely on the +library automatically assigning a suitable method internally when an EC_GROUP +is constructed. + +=item EC_GROUP_clear_free + +Use L instead. + +=item EC_GROUP_get_curve_GF2m, EC_GROUP_get_curve_GFp, EC_GROUP_set_curve_GF2m +and EC_GROUP_set_curve_GFp + +Applications should use L and L. + +=item EC_GROUP_have_precompute_mult, EC_GROUP_precompute_mult and EC_KEY_precompute_mult + +These functions are not widely used. Applications should instead switch to +named curves which OpenSSL has hardcoded lookup tables for. + +=item EC_GROUP_new, EC_GROUP_method_of, EC_POINT_method_of + +EC_METHOD is now an internal-only concept and a suitable EC_METHOD is assigned +internally without application intervention. +Users of EC_GROUP_new() should switch to a different suitable constructor. + +=item EC_KEY_can_sign + +Applications should use L instead. + +=item EC_KEY_check_key + +See L + +=item EC_KEY_set_flags, EC_KEY_get_flags and EC_KEY_clear_flags + +See L which handles flags as seperate +parameters for B, +B, B, +B and +B. +See also L + +=item EC_KEY_dup, EC_KEY_copy + +There is no direct replacement. Applications may use L +and L instead. + +=item EC_KEY_decoded_from_explicit_params + +There is no replacement. + +=item EC_KEY_generate_key + +See L. + +=item EC_KEY_get0_group, EC_KEY_get0_private_key, EC_KEY_get0_public_key, +EC_KEY_get_conv_form and EC_KEY_get_enc_flags + +See L. + +=item EC_KEY_get0_engine, EC_KEY_get_default_method, EC_KEY_get_method, +EC_KEY_new_method, EC_KEY_get_ex_data, EC_KEY_OpenSSL, EC_KEY_set_ex_data, +EC_KEY_set_default_method, EC_KEY_METHOD_*, EC_KEY_set_method + +See L + +=item EC_METHOD_get_field_type + +Use L instead. +See L + +=item EC_KEY_key2buf, EC_KEY_oct2key, EC_KEY_oct2priv, EC_KEY_priv2buf and EC_KEY_priv2oct + +There are no replacements for these. + +=item EC_KEY_new, EC_KEY_new_by_curve_name, EC_KEY_free, EC_KEY_up_ref + +See L + +=item EC_KEY_print, EC_KEY_print_fp + +See L + +=item EC_KEY_set_asn1_flag, EC_KEY_set_conv_form, EC_KEY_set_enc_flags + +See L. + +=item EC_KEY_set_group, EC_KEY_set_private_key, EC_KEY_set_public_key, EC_KEY_set_public_key_affine_coordinates + +See L. + +=item ECParameters_print, ECParameters_print_fp, ECPKParameters_print and +ECPKParameters_print_fp + +See L + +=item EC_POINT_bn2point and EC_POINT_point2bn + +These functions were not particularly useful, since EC point serialization +formats are not individual big-endian integers. + +=item EC_POINT_get_affine_coordinates_GF2m, EC_POINT_get_affine_coordinates_GFp, +EC_POINT_set_affine_coordinates_GF2m and EC_POINT_set_affine_coordinates_GFp + +Applications should use L and +L instead. + +=item EC_POINT_get_Jprojective_coordinates_GFp and EC_POINT_set_Jprojective_coordinates_GFp + +These functions are not widely used. Applications should instead use the +L and L +functions. + +=item EC_POINT_make_affine and EC_POINTs_make_affine + +There is no replacement. These functions were not widely used, and OpenSSL +automatically performs this conversion when needed. + +=item EC_POINT_set_compressed_coordinates_GF2m and EC_POINT_set_compressed_coordinates_GFp + +Applications should use L instead. + +=item EC_POINTs_mul + +This function is not widely used. Applications should instead use the +L function. + +=item ENGINE_* + +All engine functions are deprecated. An engine should be rewritten as a provider. +See L. + +=item ERR_load_*, ERR_func_error_string, ERR_get_error_line, +ERR_get_error_line_data and ERR_get_state + +OpenSSL now loads error strings automatically so these functions are not needed. + +=item ERR_peek_error_line_data and ERR_peek_last_error_line_data + +The new functions are L, L, +L, L, L, +L and L. +Applications should use L, or pick information +with ERR_peek functions and finish off with getting the error code by using +L. + +=item EVP_CIPHER_CTX_iv, EVP_CIPHER_CTX_iv_noconst and EVP_CIPHER_CTX_original_iv + +Applications should instead use L, +L and L +respectively. +See L for further information. + +=item EVP_CIPHER_meth_*, EVP_MD_CTX_set_update_fn, EVP_MD_CTX_update_fn, and EVP_MD_meth_* + +See L. + +=item EVP_PKEY_CTRL_PKCS7_ENCRYPT, EVP_PKEY_CTRL_PKCS7_DECRYPT, +EVP_PKEY_CTRL_PKCS7_SIGN, EVP_PKEY_CTRL_CMS_ENCRYPT, +EVP_PKEY_CTRL_CMS_DECRYPT, and EVP_PKEY_CTRL_CMS_SIGN. + +These control operations are not invoked by the OpenSSL library anymore and +are replaced by direct checks of the key operation against the key type +when the operation is initialized. + +=item EVP_PKEY_CTX_get0_dh_kdf_ukm and EVP_PKEY_CTX_get0_ecdh_kdf_ukm + +See the "kdf-ukm" item in L and +L. +These functions are obsolete and should not be required. + +=item EVP_PKEY_CTX_set_rsa_keygen_pubexp + +Applications should use L instead. + +=item EVP_PKEY_cmp and EVP_PKEY_cmp_parameters() + +Applications should use L and L instead. +See L for further details. + +=item EVP_PKEY_encrypt_old, EVP_PKEY_decrypt_old, + +Applications should use L and L or +L and L instead. + +=item EVP_PKEY_get0 + +This function returns NULL if the key comes from a provider. + +=item EVP_PKEY_get0_DH, EVP_PKEY_get0_DSA, EVP_PKEY_get0_EC_KEY, EVP_PKEY_get0_RSA, +EVP_PKEY_get1_DH, EVP_PKEY_get1_DSA, EVP_PKEY_get1_EC_KEY and EVP_PKEY_get1_RSA, +EVP_PKEY_get0_hmac, EVP_PKEY_get0_poly1305 and EVP_PKEY_get0_siphash + +See L. + +=item EVP_PKEY_meth_* + +See L. + +=item EVP_PKEY_new_CMAC_key + +See L. + +=item EVP_PKEY_assign, EVP_PKEY_set1_DH, EVP_PKEY_set1_DSA, EVP_PKEY_set1_EC_KEY and EVP_PKEY_set1_RSA + +See L + +=item EVP_PKEY_set1_tls_encodedpoint() and EVP_PKEY_get1_tls_encodedpoint(). + +These functions were previously used by libssl to set or get an encoded public +key into/from an EVP_PKEY object. With OpenSSL 3.0 these are replaced by the more +generic functions L and +L. +The old versions have been converted to deprecated macros that just call the +new functions. + +=item EVP_PKEY_set1_engine and EVP_PKEY_get0_engine + +See L. + +=item EVP_PKEY_set_alias_type + +This function has been removed. There is no replacement. +See L + +=item HMAC_Init_ex, HMAC_Update, HMAC_Final, HMAC_size + +See L. + +=item HMAC_CTX_new, HMAC_CTX_free, HMAC_CTX_copy, HMAC_CTX_reset, +HMAC_CTX_set_flags and HMAC_CTX_get_md + +See L. + +=item i2d_DHparams, i2d_DHxparams + +See L +and L + +=item i2d_DSAparams, i2d_DSAPrivateKey, i2d_DSAPrivateKey_bio, +i2d_DSAPrivateKey_fp, i2d_DSA_PUBKEY, i2d_DSA_PUBKEY_bio, i2d_DSA_PUBKEY_fp and +i2d_DSAPublicKey + +See L +and L + +=item i2d_ECParameters, i2d_ECPrivateKey, i2d_ECPrivateKey_bio, +i2d_ECPrivateKey_fp, i2d_EC_PUBKEY, i2d_EC_PUBKEY_bio, i2d_EC_PUBKEY_fp and +i2o_ECPublicKey. + +See L +and L + +=item i2d_RSAPrivateKey, i2d_RSAPrivateKey_bio, i2d_RSAPrivateKey_fp. +i2d_RSA_PUBKEY, i2d_RSA_PUBKEY_bio, i2d_RSA_PUBKEY_fp, i2d_RSAPublicKey +i2d_RSAPublicKey_bio and i2d_RSAPublicKey_fp + +See L +and L + +=item IDEA_encrypt, IDEA_set_decrypt_key, IDEA_set_encrypt_key, +IDEA_cbc_encrypt, IDEA_cfb64_encrypt, IDEA_ecb_encrypt and IDEA_ofb64_encrypt + +See L. +IDEA has been moved to the L. + +=item IDEA_options + +There is no replacement. This function returned a constant string. + +=item MD2, MD2_Init, MD2_Update and MD2_Final + +See L. +MD2 has been moved to the L. + +=item MD2_options + +There is no replacement. This function returned a constant string. + +=item MD4, MD4_Init, MD4_Update, MD4_Final and MD4_Transform + +See L. +MD4 has been moved to the L. + +=item MDC2, MDC2_Init, MDC2_Update and MDC2_Final + +See L. +MDC2 has been moved to the L. + +=item MD5, MD5_Init, MD5_Update, MD5_Final and MD5_Transform + +See L. + +=item NCONF_WIN32 + +This undocumented function has no replacement. +See L for more details. + +=item OCSP_parse_url() + +Use L instead. + +=item OCSP_REQ_CTX type and OCSP_REQ_CTX_*() methods. + +These methods were used to collect all necessary data to form a HTTP request, +and to perform the HTTP transfer with that request. With OpenSSL 3.0, the +type is OSSL_HTTP_REQ_CTX, and the deprecated functions are replaced +with OSSL_HTTP_REQ_CTX_*(). See L for additional details. + +=item OPENSSL_fork_child, OPENSSL_fork_parent and OPENSSL_fork_prepare + +There is no replacement for these functions. These pthread fork support methods +were unused by OpenSSL. + +=item OSSL_STORE_ctrl, OSSL_STORE_do_all_loaders, OSSL_STORE_LOADER_get0_engine, +OSSL_STORE_LOADER_get0_scheme, OSSL_STORE_LOADER_new, +OSSL_STORE_LOADER_set_attach, OSSL_STORE_LOADER_set_close, +OSSL_STORE_LOADER_set_ctrl, OSSL_STORE_LOADER_set_eof +OSSL_STORE_LOADER_set_error, OSSL_STORE_LOADER_set_expect, +OSSL_STORE_LOADER_set_find, OSSL_STORE_LOADER_set_load, +OSSL_STORE_LOADER_set_open, OSSL_STORE_LOADER_set_open_ex, +OSSL_STORE_register_loader, OSSL_STORE_unregister_loader and OSSL_STORE_vctrl + +These functions helped applications and engines create loaders for +schemes they supported. These are all deprecated and discouraged in favour of +provider implementations, see L. + +=item PEM_read_DHparams, PEM_read_bio_DHparams, +PEM_read_DSAparams, PEM_read_bio_DSAparams, +PEM_read_DSAPrivateKey, PEM_read_DSA_PUBKEY, +PEM_read_bio_DSAPrivateKey and PEM_read_bio_DSA_PUBKEY, +PEM_read_ECPKParameters, PEM_read_ECPrivateKey, PEM_read_EC_PUBKEY, +PEM_read_bio_ECPKParameters, PEM_read_bio_ECPrivateKey, PEM_read_bio_EC_PUBKEY, +PEM_read_RSAPrivateKey, PEM_read_RSA_PUBKEY, PEM_read_RSAPublicKey, +PEM_read_bio_RSAPrivateKey, PEM_read_bio_RSA_PUBKEY, PEM_read_bio_RSAPublicKey, +PEM_write_bio_DHparams, PEM_write_bio_DHxparams, PEM_write_DHparams, PEM_write_DHxparams, +PEM_write_DSAparams, PEM_write_DSAPrivateKey, PEM_write_DSA_PUBKEY, +PEM_write_bio_DSAparams, PEM_write_bio_DSAPrivateKey, PEM_write_bio_DSA_PUBKEY, +PEM_write_ECPKParameters, PEM_write_ECPrivateKey, PEM_write_EC_PUBKEY, +PEM_write_bio_ECPKParameters, PEM_write_bio_ECPrivateKey, PEM_write_bio_EC_PUBKEY, +PEM_write_RSAPrivateKey, PEM_write_RSA_PUBKEY, PEM_write_RSAPublicKey, +PEM_write_bio_RSAPrivateKey, PEM_write_bio_RSA_PUBKEY and PEM_write_bio_RSAPublicKey. + +See L + +=item PKCS1_MGF1 + +See L. + +=item RAND_get_rand_method, RAND_set_rand_method, RAND_OpenSSL and RAND_set_rand_engine + +Applications should instead use L, +L and L. +See L for more details. + +=item RC2_encrypt, RC2_decrypt, RC2_set_key, RC2_cbc_encrypt, RC2_cfb64_encrypt, +RC2_ecb_encrypt, RC2_ofb64_encrypt, +RC4, RC4_set_key, RC4_options, +RC5_32_encrypt, RC5_32_set_key, RC5_32_decrypt, RC5_32_cbc_encrypt, +RC5_32_cfb64_encrypt, RC5_32_ecb_encrypt and RC5_32_ofb64_encrypt + +See L. +The Algorithms "RC2", "RC4" and "RC5" have been moved to the L. + +=item RIPEMD160, RIPEMD160_Init, RIPEMD160_Update, RIPEMD160_Final and RIPEMD160_Transform + +See L. +The RIPE algorithm has been moved to the L. + +=item RSA_bits, RSA_security_bits and RSA_size + +Use L, L and L. + +=item RSA_check_key and RSA_check_key_ex + +See L + +=item RSA_clear_flags, RSA_flags, RSA_set_flags, RSA_test_flags, +RSA_setup_blinding, RSA_blinding_off and RSA_blinding_on + +All of these RSA flags have been deprecated without replacement: + +RSA_FLAG_BLINDING, RSA_FLAG_CACHE_PRIVATE, RSA_FLAG_CACHE_PUBLIC, +RSA_FLAG_EXT_PKEY, RSA_FLAG_NO_BLINDING, RSA_FLAG_THREAD_SAFE and +RSA_METHOD_FLAG_NO_CHECK. + +=item RSA_generate_key_ex, RSA_generate_multi_prime_key + +See L. + +=item RSA_get0_engine + +See L + +=item RSA_get0_crt_params, RSA_get0_d, RSA_get0_dmp1, RSA_get0_dmq1, +RSA_get0_e, RSA_get0_factors, RSA_get0_iqmp, RSA_get0_key, +RSA_get0_multi_prime_crt_params, RSA_get0_multi_prime_factors, RSA_get0_n, +RSA_get0_p, RSA_get0_pss_params, RSA_get0_q and RSA_get_multi_prime_extra_count. + +See L + +=item RSA_new, RSA_free and RSA_up_ref + +See L. + +=item RSA_get_default_method, RSA_get_ex_data and RSA_get_method + +See L. + +=item RSA_get_version + +There is no replacement. + +=item RSA_meth_*, RSA_new_method, RSA_null_method and RSA_PKCS1_OpenSSL + +See L. + +=item RSA_padding_add_* and RSA_padding_check_* + +See L and +L. + +=item RSA_print and RSA_print_fp + +See L + +=item RSA_public_encrypt and RSA_private_decrypt + +See L + +=item RSA_private_encrypt and RSA_public_decrypt + +This is equivalent to doing sign and verify operations (with a padding mode +of none). See L. + +=item RSAPrivateKey_dup, RSAPublicKey_dup + +There is no direct replacement. Applications may use L. + +=item RSAPublicKey_it and RSAPrivateKey_it + +See L + +=item RSA_set0_crt_params, RSA_set0_factors, RSA_set0_key and RSA_set0_multi_prime_params + +See L. + +=item RSA_set_default_method, RSA_set_method, RSA_set_ex_data + +See L + +=item RSA_sign, RSA_sign_ASN1_OCTET_STRING, RSA_verify, RSA_verify_ASN1_OCTET_STRING, +RSA_verify_PKCS1_PSS and RSA_verify_PKCS1_PSS_mgf1 + +See L. + +=item RSA_X931_derive_ex, RSA_X931_generate_key_ex and RSA_X931_hash_id. + +There are no replacements for these functions. +X931 padding can be set using L. +See B. + +=item SEED_encrypt, SEED_decrypt, SEED_set_key, SEED_cbc_encrypt, +SEED_cfb128_encrypt, SEED_ecb_encrypt and SEED_ofb128_encrypt. + +See L. +The SEED algorithm has been moved to the L. + +=item SHA1_Init, SHA1_Update, SHA1_Final, SHA1_Transform, +SHA224_Init, SHA224_Update, SHA224_Final, +SHA256_Init, SHA256_Update, SHA256_Final, SHA256_Transform, +SHA384_Init, SHA384_Update, SHA384_Final, +SHA512_Init, SHA512_Update, SHA512_Final and SHA512_Transform + +See L. + +=item SRP_Calc_A, SRP_Calc_B, SRP_Calc_client_key, SRP_Calc_server_key, +SRP_Calc_u, SRP_Calc_x, SRP_check_known_gN_param, SRP_create_verifier, +SRP_create_verifier_BN, SRP_get_default_gN, SRP_user_pwd_free, SRP_user_pwd_new, +SRP_user_pwd_set0_sv, SRP_user_pwd_set1_ids, SRP_user_pwd_set_gN, +SRP_VBASE_add0_user, SRP_VBASE_free, SRP_VBASE_get1_by_user, SRP_VBASE_init, +SRP_VBASE_new, SRP_Verify_A_mod_N, SRP_Verify_B_mod_N + +There are no replacements for the SRP functions. + +=item SSL_CTX_set_tmp_dh_callback, SSL_set_tmp_dh_callback, +SSL_CTX_set_tmp_dh and SSL_set_tmp_dh. + +These are used to set the Diffie-Hellman (DH) parameters that are to be used by +servers requiring ephemeral DH keys. Instead applications should consider using +the built-in DH parameters that are available by calling L +or L. If custom parameters are necessary then applications can +use the alternative functions L and +L. There is no direct replacement for the "callback" +functions. The callback was originally useful in order to have different +parameters for export and non-export ciphersuites. Export ciphersuites are no +longer supported by OpenSSL. Use of the callback functions should be replaced +by one of the other methods described above. + +=item SSL_CTX_set_tlsext_ticket_key_cb. + +Use the new L function instead. + +=item WHIRLPOOL, WHIRLPOOL_Init, WHIRLPOOL_Update, WHIRLPOOL_Final and WHIRLPOOL_BitUpdate + +See L. +The Whirlpool algorithm has been moved to the L. + +=item X509_certificate_type + +This was an undocumented function. Applications can use L +and L instead. + +=item X509_http_nbio and X509_CRL_http_nbio + +Use L and L instead. + +=back + +=head2 Using the FIPS Module in applications + +See L and L for details. + +=head2 OpenSSL command line application changes + +=head3 New applications + +L<'kdf'|openssl-kdf(1)> uses the new L API. +L<'mac'|openssl-mac(1)> uses the new L API. + +=head3 Added options + +'-provider_path' and '-provider' are available to all apps and can be used +multiple times to load any providers, such as the 'legacy' provider or +third party providers. If used then the 'default' provider would also need to be +specified if required. The '-provider_path' must be specified before the +'-provider' option. + +The 'list' app has many new options. See L for more information. + +`-crl_lastupdate` and `-crl_nextupdate` used by 'ca' allows explicit setting of +fields in the generated CRL. + +=head3 Removed options + +Interactive mode is not longer available. + +The `-crypt` option used by `passwd`. +The '-c' option used by `x509`, `dhparam`, `dsaparam`, and `ecparam`. + +=head3 Other Changes + +The output of Command line applications may have minor changes. +These are primarily changes in capitalisation and white space. However, in some +cases, there are additional differences. +For example, the DH parameters output from `dhparam` now lists 'P', 'Q', 'G' and +'pcounter' instead of 'prime', 'generator', 'subgroup order' and 'counter' +respectively. + +The openssl commands that read keys, certificates, and CRLs now +automatically detect the PEM or DER format of the input files so it is not +necessary to explicitly specify the input format anymore. However if the +input format option is used the specified format will be required. + +`speed` no longer uses low-level API calls. +This implies some of the performance numbers might not be comparable with the +previous releases due to higher overhead. This applies particularly to +measuring performance on smaller data chunks. + +'dhparam', 'dsa', 'gendsa', 'dsaparam', 'genrsa' and 'rsa' have been +modified to use PKEY APIs. +'genrsa' and 'rsa' now write PKCS #8 keys by default. + +=head3 Default settings + +"SHA256" is now the default digest for TS query used by `ts`. + +=head3 Deprecated apps + +'rsautl' has been deprecated, use 'pkeyutl' instead. +'dhparam', 'dsa', 'gendsa', 'dsaparam', 'genrsa', 'rsa', 'genrsa' and 'rsa' are +now in maintenance mode and no new features will be added to them. + +=head2 TLS Changes + +=over 4 + +=item TLS 1.3 FFDHE key exchange support added + +This uses DH safe prime named groups. + +=item Support for fully "pluggable" TLSv1.3 groups. + +This means that providers may supply their own group implementations (using +either the "key exchange" or the "key encapsulation" methods) which will +automatically be detected and used by libssl. + +=item SSL and SSL_CTX options are now 64 bit instead of 32 bit. + +The signatures of the functions to get and set options on SSL and +SSL_CTX objects changed from "unsigned long" to "uint64_t" type. + +This may require source code changes. + +See L, L, +L and L. + +=item SSL_set1_host() and SSL_add1_host() Changes + +These functions now take IP literal addresses as well as actual hostnames. + +=item Added SSL option SSL_OP_CLEANSE_PLAINTEXT + +If the option is set, openssl cleanses (zeroizes) plaintext bytes from +internal buffers after delivering them to the application. Note, +the application is still responsible for cleansing other copies +(e.g.: data received by L). + +=item Client-initiated renegotiation is disabled by default. + +To allow it, use the '-client_renegotiation' option, +the B flag, or the "ClientRenegotiation" +config parameter as appropriate. + +=item Secure renegotiation is now required by default for TLS connections + +Support for RFC 5746 secure renegotiation is now required by default for +SSL or TLS connections to succeed. Applications that require the ability +to connect to legacy peers will need to explicitly set +SSL_OP_LEGACY_SERVER_CONNECT. Accordingly, SSL_OP_LEGACY_SERVER_CONNECT +is no longer set as part of SSL_OP_ALL. + +=item Combining the Configure options no-ec and no-dh no longer disables TLSv1.3 + +Typically if OpenSSL has no EC or DH algorithms then it cannot support +connections with TLSv1.3. However OpenSSL now supports "pluggable" groups +through providers. Therefore third party providers may supply group +implementations even where there are no built-in ones. Attempting to create +TLS connections in such a build without also disabling TLSv1.3 at run time or +using third party provider groups may result in handshake failures. TLSv1.3 +can be disabled at compile time using the "no-tls1_3" Configure option. + +=item SSL_CTX_set_ciphersuites() and SSL_set_ciphersuites() changes. + +The methods now ignore unknown ciphers. + +=item Security callback change. + +The security callback, which can be customised by application code, supports +the security operation SSL_SECOP_TMP_DH. This is defined to take an EVP_PKEY +in the "other" parameter. In most places this is what is passed. All these +places occur server side. However there was one client side call of this +security operation and it passed a DH object instead. This is incorrect +according to the definition of SSL_SECOP_TMP_DH, and is inconsistent with all +of the other locations. Therefore this client side call has been changed to +pass an EVP_PKEY instead. + +=item New SSL option SSL_OP_IGNORE_UNEXPECTED_EOF + +The SSL option SSL_OP_IGNORE_UNEXPECTED_EOF is introduced. If that option +is set, an unexpected EOF is ignored, it pretends a close notify was received +instead and so the returned error becomes SSL_ERROR_ZERO_RETURN. + +=item The security strength of SHA1 and MD5 based signatures in TLS has been reduced. + +This results in SSL 3, TLS 1.0, TLS 1.1 and DTLS 1.0 no longer +working at the default security level of 1 and instead requires security +level 0. The security level can be changed either using the cipher string +with `@SECLEVEL`, or calling L. This also means +that where the signature algorithms extension is missing from a ClientHello +then the handshake will fail in TLS 1.2 at security level 1. This is because, +although this extension is optional, failing to provide one means that +OpenSSL will fallback to a default set of signature algorithms. This default +set requires the availability of SHA1. + +=item X509 certificates signed using SHA1 are no longer allowed at security level 1 and above. + +In TLS/SSL the default security level is 1. It can be set either using the cipher +string with `@SECLEVEL`, or calling L. If the +leaf certificate is signed with SHA-1, a call to L +will fail if the security level is not lowered first. +Outside TLS/SSL, the default security level is -1 (effectively 0). It can +be set using L or using the `-auth_level` +options of the commands. + +=back + +=head1 SEE ALSO + +L + +=head1 COPYRIGHT + +Copyright 2021 The OpenSSL Project Authors. All Rights Reserved. + +Licensed under the Apache License 2.0 (the "License"). You may not use +this file except in compliance with the License. You can obtain a copy +in the file LICENSE in the source distribution or at +L. + +=cut