openssl/ssl/statem/statem_dtls.c

1282 lines
41 KiB
C
Raw Normal View History

/*
* Copyright 2005-2018 The OpenSSL Project Authors. All Rights Reserved.
*
* Licensed under the OpenSSL license (the "License"). You may not use
* this file except in compliance with the License. You can obtain a copy
* in the file LICENSE in the source distribution or at
* https://www.openssl.org/source/license.html
2005-04-27 00:02:40 +08:00
*/
#include <limits.h>
#include <string.h>
#include <stdio.h>
#include "../ssl_locl.h"
#include "statem_locl.h"
#include "internal/cryptlib.h"
2005-04-27 00:02:40 +08:00
#include <openssl/buffer.h>
#include <openssl/objects.h>
#include <openssl/evp.h>
#include <openssl/x509.h>
#define RSMBLY_BITMASK_SIZE(msg_len) (((msg_len) + 7) / 8)
#define RSMBLY_BITMASK_MARK(bitmask, start, end) { \
if ((end) - (start) <= 8) { \
long ii; \
for (ii = (start); ii < (end); ii++) bitmask[((ii) >> 3)] |= (1 << ((ii) & 7)); \
} else { \
long ii; \
bitmask[((start) >> 3)] |= bitmask_start_values[((start) & 7)]; \
for (ii = (((start) >> 3) + 1); ii < ((((end) - 1)) >> 3); ii++) bitmask[ii] = 0xff; \
bitmask[(((end) - 1) >> 3)] |= bitmask_end_values[((end) & 7)]; \
} }
#define RSMBLY_BITMASK_IS_COMPLETE(bitmask, msg_len, is_complete) { \
long ii; \
is_complete = 1; \
if (bitmask[(((msg_len) - 1) >> 3)] != bitmask_end_values[((msg_len) & 7)]) is_complete = 0; \
if (is_complete) for (ii = (((msg_len) - 1) >> 3) - 1; ii >= 0 ; ii--) \
if (bitmask[ii] != 0xff) { is_complete = 0; break; } }
static unsigned char bitmask_start_values[] =
{ 0xff, 0xfe, 0xfc, 0xf8, 0xf0, 0xe0, 0xc0, 0x80 };
static unsigned char bitmask_end_values[] =
{ 0xff, 0x01, 0x03, 0x07, 0x0f, 0x1f, 0x3f, 0x7f };
2005-04-27 00:02:40 +08:00
static void dtls1_fix_message_header(SSL *s, size_t frag_off,
size_t frag_len);
static unsigned char *dtls1_write_message_header(SSL *s, unsigned char *p);
2005-04-27 00:02:40 +08:00
static void dtls1_set_message_header_int(SSL *s, unsigned char mt,
size_t len,
unsigned short seq_num,
size_t frag_off,
size_t frag_len);
static int dtls_get_reassembled_message(SSL *s, int *errtype, size_t *len);
static hm_fragment *dtls1_hm_fragment_new(size_t frag_len, int reassembly)
{
hm_fragment *frag = NULL;
unsigned char *buf = NULL;
unsigned char *bitmask = NULL;
if ((frag = OPENSSL_malloc(sizeof(*frag))) == NULL) {
SSLerr(SSL_F_DTLS1_HM_FRAGMENT_NEW, ERR_R_MALLOC_FAILURE);
return NULL;
}
if (frag_len) {
if ((buf = OPENSSL_malloc(frag_len)) == NULL) {
SSLerr(SSL_F_DTLS1_HM_FRAGMENT_NEW, ERR_R_MALLOC_FAILURE);
OPENSSL_free(frag);
return NULL;
}
}
/* zero length fragment gets zero frag->fragment */
frag->fragment = buf;
/* Initialize reassembly bitmask if necessary */
if (reassembly) {
bitmask = OPENSSL_zalloc(RSMBLY_BITMASK_SIZE(frag_len));
if (bitmask == NULL) {
SSLerr(SSL_F_DTLS1_HM_FRAGMENT_NEW, ERR_R_MALLOC_FAILURE);
OPENSSL_free(buf);
OPENSSL_free(frag);
return NULL;
}
}
frag->reassembly = bitmask;
return frag;
}
2005-04-27 00:02:40 +08:00
void dtls1_hm_fragment_free(hm_fragment *frag)
{
if (!frag)
return;
if (frag->msg_header.is_ccs) {
EVP_CIPHER_CTX_free(frag->msg_header.
saved_retransmit_state.enc_write_ctx);
EVP_MD_CTX_free(frag->msg_header.saved_retransmit_state.write_hash);
}
OPENSSL_free(frag->fragment);
OPENSSL_free(frag->reassembly);
OPENSSL_free(frag);
}
2005-04-27 00:02:40 +08:00
/*
* send s->init_buf in records of type 'type' (SSL3_RT_HANDSHAKE or
* SSL3_RT_CHANGE_CIPHER_SPEC)
*/
int dtls1_do_write(SSL *s, int type)
{
int ret;
size_t written;
size_t curr_mtu;
int retry = 1;
size_t len, frag_off, mac_size, blocksize, used_len;
if (!dtls1_query_mtu(s))
return -1;
if (s->d1->mtu < dtls1_min_mtu(s))
/* should have something reasonable now */
return -1;
if (s->init_off == 0 && type == SSL3_RT_HANDSHAKE) {
if (!ossl_assert(s->init_num ==
s->d1->w_msg_hdr.msg_len + DTLS1_HM_HEADER_LENGTH))
return -1;
}
if (s->write_hash) {
if (s->enc_write_ctx
&& (EVP_CIPHER_flags(EVP_CIPHER_CTX_cipher(s->enc_write_ctx)) &
EVP_CIPH_FLAG_AEAD_CIPHER) != 0)
mac_size = 0;
else
mac_size = EVP_MD_CTX_size(s->write_hash);
} else
mac_size = 0;
if (s->enc_write_ctx &&
(EVP_CIPHER_CTX_mode(s->enc_write_ctx) == EVP_CIPH_CBC_MODE))
blocksize = 2 * EVP_CIPHER_CTX_block_size(s->enc_write_ctx);
else
blocksize = 0;
frag_off = 0;
s->rwstate = SSL_NOTHING;
/* s->init_num shouldn't ever be < 0...but just in case */
while (s->init_num > 0) {
if (type == SSL3_RT_HANDSHAKE && s->init_off != 0) {
/* We must be writing a fragment other than the first one */
if (frag_off > 0) {
/* This is the first attempt at writing out this fragment */
if (s->init_off <= DTLS1_HM_HEADER_LENGTH) {
/*
* Each fragment that was already sent must at least have
* contained the message header plus one other byte.
* Therefore |init_off| must have progressed by at least
* |DTLS1_HM_HEADER_LENGTH + 1| bytes. If not something went
* wrong.
*/
return -1;
}
/*
* Adjust |init_off| and |init_num| to allow room for a new
* message header for this fragment.
*/
s->init_off -= DTLS1_HM_HEADER_LENGTH;
s->init_num += DTLS1_HM_HEADER_LENGTH;
} else {
/*
* We must have been called again after a retry so use the
* fragment offset from our last attempt. We do not need
* to adjust |init_off| and |init_num| as above, because
* that should already have been done before the retry.
*/
frag_off = s->d1->w_msg_hdr.frag_off;
}
}
used_len = BIO_wpending(s->wbio) + DTLS1_RT_HEADER_LENGTH
+ mac_size + blocksize;
if (s->d1->mtu > used_len)
curr_mtu = s->d1->mtu - used_len;
else
curr_mtu = 0;
if (curr_mtu <= DTLS1_HM_HEADER_LENGTH) {
/*
* grr.. we could get an error if MTU picked was wrong
*/
ret = BIO_flush(s->wbio);
if (ret <= 0) {
s->rwstate = SSL_WRITING;
return ret;
}
used_len = DTLS1_RT_HEADER_LENGTH + mac_size + blocksize;
if (s->d1->mtu > used_len + DTLS1_HM_HEADER_LENGTH) {
curr_mtu = s->d1->mtu - used_len;
} else {
/* Shouldn't happen */
return -1;
}
}
/*
* We just checked that s->init_num > 0 so this cast should be safe
*/
if (((unsigned int)s->init_num) > curr_mtu)
len = curr_mtu;
else
len = s->init_num;
if (len > s->max_send_fragment)
len = s->max_send_fragment;
/*
* XDTLS: this function is too long. split out the CCS part
*/
if (type == SSL3_RT_HANDSHAKE) {
if (len < DTLS1_HM_HEADER_LENGTH) {
/*
* len is so small that we really can't do anything sensible
* so fail
*/
return -1;
}
dtls1_fix_message_header(s, frag_off, len - DTLS1_HM_HEADER_LENGTH);
dtls1_write_message_header(s,
(unsigned char *)&s->init_buf->
data[s->init_off]);
}
ret = dtls1_write_bytes(s, type, &s->init_buf->data[s->init_off], len,
&written);
if (ret < 0) {
/*
* might need to update MTU here, but we don't know which
* previous packet caused the failure -- so can't really
* retransmit anything. continue as if everything is fine and
* wait for an alert to handle the retransmit
*/
if (retry && BIO_ctrl(SSL_get_wbio(s),
BIO_CTRL_DGRAM_MTU_EXCEEDED, 0, NULL) > 0) {
if (!(SSL_get_options(s) & SSL_OP_NO_QUERY_MTU)) {
if (!dtls1_query_mtu(s))
return -1;
/* Have one more go */
retry = 0;
} else
return -1;
} else {
return -1;
}
} else {
/*
* bad if this assert fails, only part of the handshake message
* got sent. but why would this happen?
*/
if (!ossl_assert(len == written))
return -1;
if (type == SSL3_RT_HANDSHAKE && !s->d1->retransmitting) {
/*
* should not be done for 'Hello Request's, but in that case
* we'll ignore the result anyway
*/
unsigned char *p =
(unsigned char *)&s->init_buf->data[s->init_off];
const struct hm_header_st *msg_hdr = &s->d1->w_msg_hdr;
size_t xlen;
if (frag_off == 0 && s->version != DTLS1_BAD_VER) {
/*
* reconstruct message header is if it is being sent in
* single fragment
*/
*p++ = msg_hdr->type;
l2n3(msg_hdr->msg_len, p);
s2n(msg_hdr->seq, p);
l2n3(0, p);
l2n3(msg_hdr->msg_len, p);
p -= DTLS1_HM_HEADER_LENGTH;
xlen = written;
} else {
p += DTLS1_HM_HEADER_LENGTH;
xlen = written - DTLS1_HM_HEADER_LENGTH;
}
if (!ssl3_finish_mac(s, p, xlen))
return -1;
}
if (written == s->init_num) {
if (s->msg_callback)
s->msg_callback(1, s->version, type, s->init_buf->data,
(size_t)(s->init_off + s->init_num), s,
s->msg_callback_arg);
s->init_off = 0; /* done writing this message */
s->init_num = 0;
return 1;
}
s->init_off += written;
s->init_num -= written;
written -= DTLS1_HM_HEADER_LENGTH;
frag_off += written;
/*
* We save the fragment offset for the next fragment so we have it
* available in case of an IO retry. We don't know the length of the
* next fragment yet so just set that to 0 for now. It will be
* updated again later.
*/
dtls1_fix_message_header(s, frag_off, 0);
}
}
return 0;
}
int dtls_get_message(SSL *s, int *mt, size_t *len)
{
struct hm_header_st *msg_hdr;
unsigned char *p;
size_t msg_len;
size_t tmplen;
int errtype;
msg_hdr = &s->d1->r_msg_hdr;
memset(msg_hdr, 0, sizeof(*msg_hdr));
again:
if (!dtls_get_reassembled_message(s, &errtype, &tmplen)) {
if (errtype == DTLS1_HM_BAD_FRAGMENT
|| errtype == DTLS1_HM_FRAGMENT_RETRY) {
/* bad fragment received */
goto again;
}
return 0;
}
*mt = s->s3->tmp.message_type;
p = (unsigned char *)s->init_buf->data;
*len = s->init_num;
if (*mt == SSL3_MT_CHANGE_CIPHER_SPEC) {
if (s->msg_callback) {
s->msg_callback(0, s->version, SSL3_RT_CHANGE_CIPHER_SPEC,
p, 1, s, s->msg_callback_arg);
}
/*
* This isn't a real handshake message so skip the processing below.
*/
return 1;
}
msg_len = msg_hdr->msg_len;
/* reconstruct message header */
*(p++) = msg_hdr->type;
l2n3(msg_len, p);
s2n(msg_hdr->seq, p);
l2n3(0, p);
l2n3(msg_len, p);
if (s->version != DTLS1_BAD_VER) {
p -= DTLS1_HM_HEADER_LENGTH;
msg_len += DTLS1_HM_HEADER_LENGTH;
}
/*
* If receiving Finished, record MAC of prior handshake messages for
* Finished verification.
*/
if (*mt == SSL3_MT_FINISHED && !ssl3_take_mac(s)) {
/* SSLfatal() already called */
return 0;
}
if (!ssl3_finish_mac(s, p, msg_len))
return 0;
if (s->msg_callback)
s->msg_callback(0, s->version, SSL3_RT_HANDSHAKE,
p, msg_len, s, s->msg_callback_arg);
memset(msg_hdr, 0, sizeof(*msg_hdr));
s->d1->handshake_read_seq++;
s->init_msg = s->init_buf->data + DTLS1_HM_HEADER_LENGTH;
return 1;
}
Excessive allocation of memory in dtls1_preprocess_fragment() This issue is very similar to CVE-2016-6307 described in the previous commit. The underlying defect is different but the security analysis and impacts are the same except that it impacts DTLS. A DTLS message includes 3 bytes for its length in the header for the message. This would allow for messages up to 16Mb in length. Messages of this length are excessive and OpenSSL includes a check to ensure that a peer is sending reasonably sized messages in order to avoid too much memory being consumed to service a connection. A flaw in the logic of version 1.1.0 means that memory for the message is allocated too early, prior to the excessive message length check. Due to way memory is allocated in OpenSSL this could mean an attacker could force up to 21Mb to be allocated to service a connection. This could lead to a Denial of Service through memory exhaustion. However, the excessive message length check still takes place, and this would cause the connection to immediately fail. Assuming that the application calls SSL_free() on the failed conneciton in a timely manner then the 21Mb of allocated memory will then be immediately freed again. Therefore the excessive memory allocation will be transitory in nature. This then means that there is only a security impact if: 1) The application does not call SSL_free() in a timely manner in the event that the connection fails or 2) The application is working in a constrained environment where there is very little free memory or 3) The attacker initiates multiple connection attempts such that there are multiple connections in a state where memory has been allocated for the connection; SSL_free() has not yet been called; and there is insufficient memory to service the multiple requests. Except in the instance of (1) above any Denial Of Service is likely to be transitory because as soon as the connection fails the memory is subsequently freed again in the SSL_free() call. However there is an increased risk during this period of application crashes due to the lack of memory - which would then mean a more serious Denial of Service. This issue does not affect TLS users. Issue was reported by Shi Lei (Gear Team, Qihoo 360 Inc.). CVE-2016-6308 Reviewed-by: Richard Levitte <levitte@openssl.org>
2016-09-19 18:57:07 +08:00
/*
* dtls1_max_handshake_message_len returns the maximum number of bytes
* permitted in a DTLS handshake message for |s|. The minimum is 16KB, but
* may be greater if the maximum certificate list size requires it.
*/
static size_t dtls1_max_handshake_message_len(const SSL *s)
Excessive allocation of memory in dtls1_preprocess_fragment() This issue is very similar to CVE-2016-6307 described in the previous commit. The underlying defect is different but the security analysis and impacts are the same except that it impacts DTLS. A DTLS message includes 3 bytes for its length in the header for the message. This would allow for messages up to 16Mb in length. Messages of this length are excessive and OpenSSL includes a check to ensure that a peer is sending reasonably sized messages in order to avoid too much memory being consumed to service a connection. A flaw in the logic of version 1.1.0 means that memory for the message is allocated too early, prior to the excessive message length check. Due to way memory is allocated in OpenSSL this could mean an attacker could force up to 21Mb to be allocated to service a connection. This could lead to a Denial of Service through memory exhaustion. However, the excessive message length check still takes place, and this would cause the connection to immediately fail. Assuming that the application calls SSL_free() on the failed conneciton in a timely manner then the 21Mb of allocated memory will then be immediately freed again. Therefore the excessive memory allocation will be transitory in nature. This then means that there is only a security impact if: 1) The application does not call SSL_free() in a timely manner in the event that the connection fails or 2) The application is working in a constrained environment where there is very little free memory or 3) The attacker initiates multiple connection attempts such that there are multiple connections in a state where memory has been allocated for the connection; SSL_free() has not yet been called; and there is insufficient memory to service the multiple requests. Except in the instance of (1) above any Denial Of Service is likely to be transitory because as soon as the connection fails the memory is subsequently freed again in the SSL_free() call. However there is an increased risk during this period of application crashes due to the lack of memory - which would then mean a more serious Denial of Service. This issue does not affect TLS users. Issue was reported by Shi Lei (Gear Team, Qihoo 360 Inc.). CVE-2016-6308 Reviewed-by: Richard Levitte <levitte@openssl.org>
2016-09-19 18:57:07 +08:00
{
size_t max_len = DTLS1_HM_HEADER_LENGTH + SSL3_RT_MAX_ENCRYPTED_LENGTH;
if (max_len < s->max_cert_list)
Excessive allocation of memory in dtls1_preprocess_fragment() This issue is very similar to CVE-2016-6307 described in the previous commit. The underlying defect is different but the security analysis and impacts are the same except that it impacts DTLS. A DTLS message includes 3 bytes for its length in the header for the message. This would allow for messages up to 16Mb in length. Messages of this length are excessive and OpenSSL includes a check to ensure that a peer is sending reasonably sized messages in order to avoid too much memory being consumed to service a connection. A flaw in the logic of version 1.1.0 means that memory for the message is allocated too early, prior to the excessive message length check. Due to way memory is allocated in OpenSSL this could mean an attacker could force up to 21Mb to be allocated to service a connection. This could lead to a Denial of Service through memory exhaustion. However, the excessive message length check still takes place, and this would cause the connection to immediately fail. Assuming that the application calls SSL_free() on the failed conneciton in a timely manner then the 21Mb of allocated memory will then be immediately freed again. Therefore the excessive memory allocation will be transitory in nature. This then means that there is only a security impact if: 1) The application does not call SSL_free() in a timely manner in the event that the connection fails or 2) The application is working in a constrained environment where there is very little free memory or 3) The attacker initiates multiple connection attempts such that there are multiple connections in a state where memory has been allocated for the connection; SSL_free() has not yet been called; and there is insufficient memory to service the multiple requests. Except in the instance of (1) above any Denial Of Service is likely to be transitory because as soon as the connection fails the memory is subsequently freed again in the SSL_free() call. However there is an increased risk during this period of application crashes due to the lack of memory - which would then mean a more serious Denial of Service. This issue does not affect TLS users. Issue was reported by Shi Lei (Gear Team, Qihoo 360 Inc.). CVE-2016-6308 Reviewed-by: Richard Levitte <levitte@openssl.org>
2016-09-19 18:57:07 +08:00
return s->max_cert_list;
return max_len;
}
static int dtls1_preprocess_fragment(SSL *s, struct hm_header_st *msg_hdr)
{
size_t frag_off, frag_len, msg_len;
msg_len = msg_hdr->msg_len;
frag_off = msg_hdr->frag_off;
frag_len = msg_hdr->frag_len;
/* sanity checking */
Excessive allocation of memory in dtls1_preprocess_fragment() This issue is very similar to CVE-2016-6307 described in the previous commit. The underlying defect is different but the security analysis and impacts are the same except that it impacts DTLS. A DTLS message includes 3 bytes for its length in the header for the message. This would allow for messages up to 16Mb in length. Messages of this length are excessive and OpenSSL includes a check to ensure that a peer is sending reasonably sized messages in order to avoid too much memory being consumed to service a connection. A flaw in the logic of version 1.1.0 means that memory for the message is allocated too early, prior to the excessive message length check. Due to way memory is allocated in OpenSSL this could mean an attacker could force up to 21Mb to be allocated to service a connection. This could lead to a Denial of Service through memory exhaustion. However, the excessive message length check still takes place, and this would cause the connection to immediately fail. Assuming that the application calls SSL_free() on the failed conneciton in a timely manner then the 21Mb of allocated memory will then be immediately freed again. Therefore the excessive memory allocation will be transitory in nature. This then means that there is only a security impact if: 1) The application does not call SSL_free() in a timely manner in the event that the connection fails or 2) The application is working in a constrained environment where there is very little free memory or 3) The attacker initiates multiple connection attempts such that there are multiple connections in a state where memory has been allocated for the connection; SSL_free() has not yet been called; and there is insufficient memory to service the multiple requests. Except in the instance of (1) above any Denial Of Service is likely to be transitory because as soon as the connection fails the memory is subsequently freed again in the SSL_free() call. However there is an increased risk during this period of application crashes due to the lack of memory - which would then mean a more serious Denial of Service. This issue does not affect TLS users. Issue was reported by Shi Lei (Gear Team, Qihoo 360 Inc.). CVE-2016-6308 Reviewed-by: Richard Levitte <levitte@openssl.org>
2016-09-19 18:57:07 +08:00
if ((frag_off + frag_len) > msg_len
|| msg_len > dtls1_max_handshake_message_len(s)) {
SSLfatal(s, SSL_AD_ILLEGAL_PARAMETER, SSL_F_DTLS1_PREPROCESS_FRAGMENT,
SSL_R_EXCESSIVE_MESSAGE_SIZE);
return 0;
}
if (s->d1->r_msg_hdr.frag_off == 0) { /* first fragment */
/*
Excessive allocation of memory in dtls1_preprocess_fragment() This issue is very similar to CVE-2016-6307 described in the previous commit. The underlying defect is different but the security analysis and impacts are the same except that it impacts DTLS. A DTLS message includes 3 bytes for its length in the header for the message. This would allow for messages up to 16Mb in length. Messages of this length are excessive and OpenSSL includes a check to ensure that a peer is sending reasonably sized messages in order to avoid too much memory being consumed to service a connection. A flaw in the logic of version 1.1.0 means that memory for the message is allocated too early, prior to the excessive message length check. Due to way memory is allocated in OpenSSL this could mean an attacker could force up to 21Mb to be allocated to service a connection. This could lead to a Denial of Service through memory exhaustion. However, the excessive message length check still takes place, and this would cause the connection to immediately fail. Assuming that the application calls SSL_free() on the failed conneciton in a timely manner then the 21Mb of allocated memory will then be immediately freed again. Therefore the excessive memory allocation will be transitory in nature. This then means that there is only a security impact if: 1) The application does not call SSL_free() in a timely manner in the event that the connection fails or 2) The application is working in a constrained environment where there is very little free memory or 3) The attacker initiates multiple connection attempts such that there are multiple connections in a state where memory has been allocated for the connection; SSL_free() has not yet been called; and there is insufficient memory to service the multiple requests. Except in the instance of (1) above any Denial Of Service is likely to be transitory because as soon as the connection fails the memory is subsequently freed again in the SSL_free() call. However there is an increased risk during this period of application crashes due to the lack of memory - which would then mean a more serious Denial of Service. This issue does not affect TLS users. Issue was reported by Shi Lei (Gear Team, Qihoo 360 Inc.). CVE-2016-6308 Reviewed-by: Richard Levitte <levitte@openssl.org>
2016-09-19 18:57:07 +08:00
* msg_len is limited to 2^24, but is effectively checked against
* dtls_max_handshake_message_len(s) above
*/
if (!BUF_MEM_grow_clean(s->init_buf, msg_len + DTLS1_HM_HEADER_LENGTH)) {
SSLfatal(s, SSL_AD_INTERNAL_ERROR, SSL_F_DTLS1_PREPROCESS_FRAGMENT,
ERR_R_BUF_LIB);
return 0;
}
s->s3->tmp.message_size = msg_len;
s->d1->r_msg_hdr.msg_len = msg_len;
s->s3->tmp.message_type = msg_hdr->type;
s->d1->r_msg_hdr.type = msg_hdr->type;
s->d1->r_msg_hdr.seq = msg_hdr->seq;
} else if (msg_len != s->d1->r_msg_hdr.msg_len) {
/*
* They must be playing with us! BTW, failure to enforce upper limit
* would open possibility for buffer overrun.
*/
SSLfatal(s, SSL_AD_ILLEGAL_PARAMETER, SSL_F_DTLS1_PREPROCESS_FRAGMENT,
SSL_R_EXCESSIVE_MESSAGE_SIZE);
return 0;
}
return 1;
}
2007-10-13 18:57:02 +08:00
/*
* Returns 1 if there is a buffered fragment available, 0 if not, or -1 on a
* fatal error.
*/
static int dtls1_retrieve_buffered_fragment(SSL *s, size_t *len)
{
/*-
* (0) check whether the desired fragment is available
* if so:
* (1) copy over the fragment to s->init_buf->data[]
* (2) update s->init_num
*/
pitem *item;
hm_fragment *frag;
int ret;
Fix DTLS buffered message DoS attack DTLS can handle out of order record delivery. Additionally since handshake messages can be bigger than will fit into a single packet, the messages can be fragmented across multiple records (as with normal TLS). That means that the messages can arrive mixed up, and we have to reassemble them. We keep a queue of buffered messages that are "from the future", i.e. messages we're not ready to deal with yet but have arrived early. The messages held there may not be full yet - they could be one or more fragments that are still in the process of being reassembled. The code assumes that we will eventually complete the reassembly and when that occurs the complete message is removed from the queue at the point that we need to use it. However, DTLS is also tolerant of packet loss. To get around that DTLS messages can be retransmitted. If we receive a full (non-fragmented) message from the peer after previously having received a fragment of that message, then we ignore the message in the queue and just use the non-fragmented version. At that point the queued message will never get removed. Additionally the peer could send "future" messages that we never get to in order to complete the handshake. Each message has a sequence number (starting from 0). We will accept a message fragment for the current message sequence number, or for any sequence up to 10 into the future. However if the Finished message has a sequence number of 2, anything greater than that in the queue is just left there. So, in those two ways we can end up with "orphaned" data in the queue that will never get removed - except when the connection is closed. At that point all the queues are flushed. An attacker could seek to exploit this by filling up the queues with lots of large messages that are never going to be used in order to attempt a DoS by memory exhaustion. I will assume that we are only concerned with servers here. It does not seem reasonable to be concerned about a memory exhaustion attack on a client. They are unlikely to process enough connections for this to be an issue. A "long" handshake with many messages might be 5 messages long (in the incoming direction), e.g. ClientHello, Certificate, ClientKeyExchange, CertificateVerify, Finished. So this would be message sequence numbers 0 to 4. Additionally we can buffer up to 10 messages in the future. Therefore the maximum number of messages that an attacker could send that could get orphaned would typically be 15. The maximum size that a DTLS message is allowed to be is defined by max_cert_list, which by default is 100k. Therefore the maximum amount of "orphaned" memory per connection is 1500k. Message sequence numbers get reset after the Finished message, so renegotiation will not extend the maximum number of messages that can be orphaned per connection. As noted above, the queues do get cleared when the connection is closed. Therefore in order to mount an effective attack, an attacker would have to open many simultaneous connections. Issue reported by Quan Luo. CVE-2016-2179 Reviewed-by: Richard Levitte <levitte@openssl.org>
2016-06-30 20:17:08 +08:00
do {
item = pqueue_peek(s->d1->buffered_messages);
if (item == NULL)
return 0;
frag = (hm_fragment *)item->data;
if (frag->msg_header.seq < s->d1->handshake_read_seq) {
/* This is a stale message that has been buffered so clear it */
pqueue_pop(s->d1->buffered_messages);
dtls1_hm_fragment_free(frag);
pitem_free(item);
item = NULL;
frag = NULL;
}
} while (item == NULL);
/* Don't return if reassembly still in progress */
if (frag->reassembly != NULL)
return 0;
if (s->d1->handshake_read_seq == frag->msg_header.seq) {
size_t frag_len = frag->msg_header.frag_len;
pqueue_pop(s->d1->buffered_messages);
/* Calls SSLfatal() as required */
ret = dtls1_preprocess_fragment(s, &frag->msg_header);
if (ret) {
unsigned char *p =
(unsigned char *)s->init_buf->data + DTLS1_HM_HEADER_LENGTH;
memcpy(&p[frag->msg_header.frag_off], frag->fragment,
frag->msg_header.frag_len);
}
dtls1_hm_fragment_free(frag);
pitem_free(item);
if (ret) {
*len = frag_len;
return 1;
}
/* Fatal error */
s->init_num = 0;
return -1;
} else {
return 0;
}
}
static int
dtls1_reassemble_fragment(SSL *s, const struct hm_header_st *msg_hdr)
{
hm_fragment *frag = NULL;
pitem *item = NULL;
int i = -1, is_complete;
unsigned char seq64be[8];
size_t frag_len = msg_hdr->frag_len;
size_t readbytes;
if ((msg_hdr->frag_off + frag_len) > msg_hdr->msg_len ||
msg_hdr->msg_len > dtls1_max_handshake_message_len(s))
goto err;
if (frag_len == 0) {
return DTLS1_HM_FRAGMENT_RETRY;
}
/* Try to find item in queue */
memset(seq64be, 0, sizeof(seq64be));
seq64be[6] = (unsigned char)(msg_hdr->seq >> 8);
seq64be[7] = (unsigned char)msg_hdr->seq;
item = pqueue_find(s->d1->buffered_messages, seq64be);
if (item == NULL) {
frag = dtls1_hm_fragment_new(msg_hdr->msg_len, 1);
if (frag == NULL)
goto err;
memcpy(&(frag->msg_header), msg_hdr, sizeof(*msg_hdr));
frag->msg_header.frag_len = frag->msg_header.msg_len;
frag->msg_header.frag_off = 0;
} else {
frag = (hm_fragment *)item->data;
if (frag->msg_header.msg_len != msg_hdr->msg_len) {
item = NULL;
frag = NULL;
goto err;
}
}
/*
* If message is already reassembled, this must be a retransmit and can
* be dropped. In this case item != NULL and so frag does not need to be
* freed.
*/
if (frag->reassembly == NULL) {
unsigned char devnull[256];
while (frag_len) {
i = s->method->ssl_read_bytes(s, SSL3_RT_HANDSHAKE, NULL,
devnull,
frag_len >
sizeof(devnull) ? sizeof(devnull) :
frag_len, 0, &readbytes);
if (i <= 0)
goto err;
frag_len -= readbytes;
}
return DTLS1_HM_FRAGMENT_RETRY;
}
/* read the body of the fragment (header has already been read */
i = s->method->ssl_read_bytes(s, SSL3_RT_HANDSHAKE, NULL,
frag->fragment + msg_hdr->frag_off,
frag_len, 0, &readbytes);
if (i <= 0 || readbytes != frag_len)
i = -1;
if (i <= 0)
goto err;
RSMBLY_BITMASK_MARK(frag->reassembly, (long)msg_hdr->frag_off,
(long)(msg_hdr->frag_off + frag_len));
if (!ossl_assert(msg_hdr->msg_len > 0))
goto err;
RSMBLY_BITMASK_IS_COMPLETE(frag->reassembly, (long)msg_hdr->msg_len,
is_complete);
if (is_complete) {
OPENSSL_free(frag->reassembly);
frag->reassembly = NULL;
}
if (item == NULL) {
item = pitem_new(seq64be, frag);
if (item == NULL) {
i = -1;
goto err;
}
item = pqueue_insert(s->d1->buffered_messages, item);
/*
* pqueue_insert fails iff a duplicate item is inserted. However,
* |item| cannot be a duplicate. If it were, |pqueue_find|, above,
* would have returned it and control would never have reached this
* branch.
*/
if (!ossl_assert(item != NULL))
goto err;
}
return DTLS1_HM_FRAGMENT_RETRY;
err:
if (item == NULL)
dtls1_hm_fragment_free(frag);
return -1;
}
2005-04-27 00:02:40 +08:00
static int
dtls1_process_out_of_seq_message(SSL *s, const struct hm_header_st *msg_hdr)
2005-04-27 00:02:40 +08:00
{
int i = -1;
hm_fragment *frag = NULL;
pitem *item = NULL;
unsigned char seq64be[8];
size_t frag_len = msg_hdr->frag_len;
size_t readbytes;
if ((msg_hdr->frag_off + frag_len) > msg_hdr->msg_len)
goto err;
/* Try to find item in queue, to prevent duplicate entries */
memset(seq64be, 0, sizeof(seq64be));
seq64be[6] = (unsigned char)(msg_hdr->seq >> 8);
seq64be[7] = (unsigned char)msg_hdr->seq;
item = pqueue_find(s->d1->buffered_messages, seq64be);
/*
* If we already have an entry and this one is a fragment, don't discard
* it and rather try to reassemble it.
*/
if (item != NULL && frag_len != msg_hdr->msg_len)
item = NULL;
/*
* Discard the message if sequence number was already there, is too far
* in the future, already in the queue or if we received a FINISHED
* before the SERVER_HELLO, which then must be a stale retransmit.
*/
if (msg_hdr->seq <= s->d1->handshake_read_seq ||
msg_hdr->seq > s->d1->handshake_read_seq + 10 || item != NULL ||
(s->d1->handshake_read_seq == 0 && msg_hdr->type == SSL3_MT_FINISHED)) {
unsigned char devnull[256];
while (frag_len) {
i = s->method->ssl_read_bytes(s, SSL3_RT_HANDSHAKE, NULL,
devnull,
frag_len >
sizeof(devnull) ? sizeof(devnull) :
frag_len, 0, &readbytes);
if (i <= 0)
goto err;
frag_len -= readbytes;
}
} else {
if (frag_len != msg_hdr->msg_len) {
return dtls1_reassemble_fragment(s, msg_hdr);
}
if (frag_len > dtls1_max_handshake_message_len(s))
goto err;
frag = dtls1_hm_fragment_new(frag_len, 0);
if (frag == NULL)
goto err;
memcpy(&(frag->msg_header), msg_hdr, sizeof(*msg_hdr));
if (frag_len) {
/*
* read the body of the fragment (header has already been read
*/
i = s->method->ssl_read_bytes(s, SSL3_RT_HANDSHAKE, NULL,
frag->fragment, frag_len, 0,
&readbytes);
if (i<=0 || readbytes != frag_len)
i = -1;
if (i <= 0)
goto err;
}
item = pitem_new(seq64be, frag);
if (item == NULL)
goto err;
item = pqueue_insert(s->d1->buffered_messages, item);
/*
* pqueue_insert fails iff a duplicate item is inserted. However,
* |item| cannot be a duplicate. If it were, |pqueue_find|, above,
* would have returned it. Then, either |frag_len| !=
* |msg_hdr->msg_len| in which case |item| is set to NULL and it will
* have been processed with |dtls1_reassemble_fragment|, above, or
* the record will have been discarded.
*/
if (!ossl_assert(item != NULL))
goto err;
}
return DTLS1_HM_FRAGMENT_RETRY;
err:
if (item == NULL)
dtls1_hm_fragment_free(frag);
return 0;
}
2005-04-27 00:02:40 +08:00
static int dtls_get_reassembled_message(SSL *s, int *errtype, size_t *len)
{
unsigned char wire[DTLS1_HM_HEADER_LENGTH];
size_t mlen, frag_off, frag_len;
int i, ret, recvd_type;
struct hm_header_st msg_hdr;
size_t readbytes;
*errtype = 0;
redo:
/* see if we have the required fragment already */
ret = dtls1_retrieve_buffered_fragment(s, &frag_len);
if (ret < 0) {
/* SSLfatal() already called */
return 0;
}
if (ret > 0) {
s->init_num = frag_len;
*len = frag_len;
return 1;
}
/* read handshake message header */
i = s->method->ssl_read_bytes(s, SSL3_RT_HANDSHAKE, &recvd_type, wire,
DTLS1_HM_HEADER_LENGTH, 0, &readbytes);
if (i <= 0) { /* nbio, or an error */
s->rwstate = SSL_READING;
*len = 0;
return 0;
}
if (recvd_type == SSL3_RT_CHANGE_CIPHER_SPEC) {
if (wire[0] != SSL3_MT_CCS) {
SSLfatal(s, SSL_AD_UNEXPECTED_MESSAGE,
SSL_F_DTLS_GET_REASSEMBLED_MESSAGE,
SSL_R_BAD_CHANGE_CIPHER_SPEC);
goto f_err;
}
memcpy(s->init_buf->data, wire, readbytes);
s->init_num = readbytes - 1;
s->init_msg = s->init_buf->data + 1;
s->s3->tmp.message_type = SSL3_MT_CHANGE_CIPHER_SPEC;
s->s3->tmp.message_size = readbytes - 1;
*len = readbytes - 1;
return 1;
}
/* Handshake fails if message header is incomplete */
if (readbytes != DTLS1_HM_HEADER_LENGTH) {
SSLfatal(s, SSL_AD_UNEXPECTED_MESSAGE,
SSL_F_DTLS_GET_REASSEMBLED_MESSAGE, SSL_R_UNEXPECTED_MESSAGE);
goto f_err;
}
/* parse the message fragment header */
dtls1_get_message_header(wire, &msg_hdr);
mlen = msg_hdr.msg_len;
frag_off = msg_hdr.frag_off;
frag_len = msg_hdr.frag_len;
/*
* We must have at least frag_len bytes left in the record to be read.
* Fragments must not span records.
*/
if (frag_len > RECORD_LAYER_get_rrec_length(&s->rlayer)) {
SSLfatal(s, SSL_AD_ILLEGAL_PARAMETER,
SSL_F_DTLS_GET_REASSEMBLED_MESSAGE, SSL_R_BAD_LENGTH);
goto f_err;
}
/*
* if this is a future (or stale) message it gets buffered
* (or dropped)--no further processing at this time
* While listening, we accept seq 1 (ClientHello with cookie)
* although we're still expecting seq 0 (ClientHello)
*/
if (msg_hdr.seq != s->d1->handshake_read_seq) {
*errtype = dtls1_process_out_of_seq_message(s, &msg_hdr);
return 0;
}
if (frag_len && frag_len < mlen) {
*errtype = dtls1_reassemble_fragment(s, &msg_hdr);
return 0;
}
if (!s->server
&& s->d1->r_msg_hdr.frag_off == 0
&& s->statem.hand_state != TLS_ST_OK
&& wire[0] == SSL3_MT_HELLO_REQUEST) {
/*
* The server may always send 'Hello Request' messages -- we are
* doing a handshake anyway now, so ignore them if their format is
* correct. Does not count for 'Finished' MAC.
*/
if (wire[1] == 0 && wire[2] == 0 && wire[3] == 0) {
if (s->msg_callback)
s->msg_callback(0, s->version, SSL3_RT_HANDSHAKE,
wire, DTLS1_HM_HEADER_LENGTH, s,
s->msg_callback_arg);
s->init_num = 0;
goto redo;
} else { /* Incorrectly formatted Hello request */
SSLfatal(s, SSL_AD_UNEXPECTED_MESSAGE,
SSL_F_DTLS_GET_REASSEMBLED_MESSAGE,
SSL_R_UNEXPECTED_MESSAGE);
goto f_err;
}
}
if (!dtls1_preprocess_fragment(s, &msg_hdr)) {
/* SSLfatal() already called */
goto f_err;
}
if (frag_len > 0) {
unsigned char *p =
(unsigned char *)s->init_buf->data + DTLS1_HM_HEADER_LENGTH;
i = s->method->ssl_read_bytes(s, SSL3_RT_HANDSHAKE, NULL,
&p[frag_off], frag_len, 0, &readbytes);
/*
* This shouldn't ever fail due to NBIO because we already checked
* that we have enough data in the record
*/
if (i <= 0) {
s->rwstate = SSL_READING;
*len = 0;
return 0;
}
} else {
readbytes = 0;
}
/*
* XDTLS: an incorrectly formatted fragment should cause the handshake
* to fail
*/
if (readbytes != frag_len) {
SSLfatal(s, SSL_AD_ILLEGAL_PARAMETER,
SSL_F_DTLS_GET_REASSEMBLED_MESSAGE, SSL_R_BAD_LENGTH);
goto f_err;
}
/*
* Note that s->init_num is *not* used as current offset in
* s->init_buf->data, but as a counter summing up fragments' lengths: as
* soon as they sum up to handshake packet length, we assume we have got
* all the fragments.
*/
*len = s->init_num = frag_len;
return 1;
f_err:
s->init_num = 0;
*len = 0;
return 0;
}
2005-04-27 00:02:40 +08:00
/*-
* for these 2 messages, we need to
* ssl->enc_read_ctx re-init
* ssl->rlayer.read_sequence zero
* ssl->s3->read_mac_secret re-init
* ssl->session->read_sym_enc assign
* ssl->session->read_compression assign
* ssl->session->read_hash assign
2005-04-27 00:02:40 +08:00
*/
int dtls_construct_change_cipher_spec(SSL *s, WPACKET *pkt)
{
if (s->version == DTLS1_BAD_VER) {
s->d1->next_handshake_write_seq++;
if (!WPACKET_put_bytes_u16(pkt, s->d1->handshake_write_seq)) {
SSLfatal(s, SSL_AD_INTERNAL_ERROR,
SSL_F_DTLS_CONSTRUCT_CHANGE_CIPHER_SPEC,
ERR_R_INTERNAL_ERROR);
return 0;
}
}
2005-04-27 00:02:40 +08:00
return 1;
}
#ifndef OPENSSL_NO_SCTP
/*
* Wait for a dry event. Should only be called at a point in the handshake
* where we are not expecting any data from the peer except an alert.
*/
WORK_STATE dtls_wait_for_dry(SSL *s)
{
int ret, errtype;
size_t len;
/* read app data until dry event */
ret = BIO_dgram_sctp_wait_for_dry(SSL_get_wbio(s));
if (ret < 0) {
SSLfatal(s, SSL_AD_INTERNAL_ERROR, SSL_F_DTLS_WAIT_FOR_DRY,
ERR_R_INTERNAL_ERROR);
return WORK_ERROR;
}
if (ret == 0) {
/*
* We're not expecting any more messages from the peer at this point -
* but we could get an alert. If an alert is waiting then we will never
* return successfully. Therefore we attempt to read a message. This
* should never succeed but will process any waiting alerts.
*/
if (dtls_get_reassembled_message(s, &errtype, &len)) {
/* The call succeeded! This should never happen */
SSLfatal(s, SSL_AD_UNEXPECTED_MESSAGE, SSL_F_DTLS_WAIT_FOR_DRY,
SSL_R_UNEXPECTED_MESSAGE);
return WORK_ERROR;
}
s->s3->in_read_app_data = 2;
s->rwstate = SSL_READING;
BIO_clear_retry_flags(SSL_get_rbio(s));
BIO_set_retry_read(SSL_get_rbio(s));
return WORK_MORE_A;
}
return WORK_FINISHED_CONTINUE;
}
#endif
2005-04-27 00:02:40 +08:00
int dtls1_read_failed(SSL *s, int code)
{
if (code > 0) {
SSLfatal(s, SSL_AD_INTERNAL_ERROR,
SSL_F_DTLS1_READ_FAILED, ERR_R_INTERNAL_ERROR);
return 0;
}
if (!dtls1_is_timer_expired(s) || ossl_statem_in_error(s)) {
/*
* not a timeout, none of our business, let higher layers handle
* this. in fact it's probably an error
*/
return code;
}
/* done, no need to send a retransmit */
if (!SSL_in_init(s))
{
BIO_set_flags(SSL_get_rbio(s), BIO_FLAGS_READ);
return code;
}
2005-04-27 00:02:40 +08:00
return dtls1_handle_timeout(s);
}
2005-04-27 00:02:40 +08:00
int dtls1_get_queue_priority(unsigned short seq, int is_ccs)
{
/*
* The index of the retransmission queue actually is the message sequence
* number, since the queue only contains messages of a single handshake.
* However, the ChangeCipherSpec has no message sequence number and so
* using only the sequence will result in the CCS and Finished having the
* same index. To prevent this, the sequence number is multiplied by 2.
* In case of a CCS 1 is subtracted. This does not only differ CSS and
* Finished, it also maintains the order of the index (important for
* priority queues) and fits in the unsigned short variable.
*/
return seq * 2 - is_ccs;
}
2005-04-27 00:02:40 +08:00
int dtls1_retransmit_buffered_messages(SSL *s)
{
pqueue *sent = s->d1->sent_messages;
piterator iter;
pitem *item;
hm_fragment *frag;
int found = 0;
iter = pqueue_iterator(sent);
for (item = pqueue_next(&iter); item != NULL; item = pqueue_next(&iter)) {
frag = (hm_fragment *)item->data;
if (dtls1_retransmit_message(s, (unsigned short)
dtls1_get_queue_priority
(frag->msg_header.seq,
frag->msg_header.is_ccs), &found) <= 0)
return -1;
}
return 1;
}
2005-04-27 00:02:40 +08:00
int dtls1_buffer_message(SSL *s, int is_ccs)
{
pitem *item;
hm_fragment *frag;
unsigned char seq64be[8];
/*
* this function is called immediately after a message has been
* serialized
*/
if (!ossl_assert(s->init_off == 0))
return 0;
frag = dtls1_hm_fragment_new(s->init_num, 0);
if (frag == NULL)
return 0;
memcpy(frag->fragment, s->init_buf->data, s->init_num);
if (is_ccs) {
/* For DTLS1_BAD_VER the header length is non-standard */
if (!ossl_assert(s->d1->w_msg_hdr.msg_len +
((s->version ==
DTLS1_BAD_VER) ? 3 : DTLS1_CCS_HEADER_LENGTH)
== (unsigned int)s->init_num))
return 0;
} else {
if (!ossl_assert(s->d1->w_msg_hdr.msg_len +
DTLS1_HM_HEADER_LENGTH == (unsigned int)s->init_num))
return 0;
}
frag->msg_header.msg_len = s->d1->w_msg_hdr.msg_len;
frag->msg_header.seq = s->d1->w_msg_hdr.seq;
frag->msg_header.type = s->d1->w_msg_hdr.type;
frag->msg_header.frag_off = 0;
frag->msg_header.frag_len = s->d1->w_msg_hdr.msg_len;
frag->msg_header.is_ccs = is_ccs;
/* save current state */
frag->msg_header.saved_retransmit_state.enc_write_ctx = s->enc_write_ctx;
frag->msg_header.saved_retransmit_state.write_hash = s->write_hash;
frag->msg_header.saved_retransmit_state.compress = s->compress;
frag->msg_header.saved_retransmit_state.session = s->session;
frag->msg_header.saved_retransmit_state.epoch =
DTLS_RECORD_LAYER_get_w_epoch(&s->rlayer);
memset(seq64be, 0, sizeof(seq64be));
seq64be[6] =
(unsigned
char)(dtls1_get_queue_priority(frag->msg_header.seq,
frag->msg_header.is_ccs) >> 8);
seq64be[7] =
(unsigned
char)(dtls1_get_queue_priority(frag->msg_header.seq,
frag->msg_header.is_ccs));
item = pitem_new(seq64be, frag);
if (item == NULL) {
dtls1_hm_fragment_free(frag);
return 0;
}
2005-04-27 00:02:40 +08:00
pqueue_insert(s->d1->sent_messages, item);
return 1;
}
2005-04-27 00:02:40 +08:00
int dtls1_retransmit_message(SSL *s, unsigned short seq, int *found)
{
int ret;
/* XDTLS: for now assuming that read/writes are blocking */
pitem *item;
hm_fragment *frag;
unsigned long header_length;
unsigned char seq64be[8];
struct dtls1_retransmit_state saved_state;
/* XDTLS: the requested message ought to be found, otherwise error */
memset(seq64be, 0, sizeof(seq64be));
seq64be[6] = (unsigned char)(seq >> 8);
seq64be[7] = (unsigned char)seq;
item = pqueue_find(s->d1->sent_messages, seq64be);
if (item == NULL) {
SSLfatal(s, SSL_AD_INTERNAL_ERROR, SSL_F_DTLS1_RETRANSMIT_MESSAGE,
ERR_R_INTERNAL_ERROR);
*found = 0;
return 0;
}
*found = 1;
frag = (hm_fragment *)item->data;
if (frag->msg_header.is_ccs)
header_length = DTLS1_CCS_HEADER_LENGTH;
else
header_length = DTLS1_HM_HEADER_LENGTH;
memcpy(s->init_buf->data, frag->fragment,
frag->msg_header.msg_len + header_length);
s->init_num = frag->msg_header.msg_len + header_length;
dtls1_set_message_header_int(s, frag->msg_header.type,
frag->msg_header.msg_len,
frag->msg_header.seq, 0,
frag->msg_header.frag_len);
/* save current state */
saved_state.enc_write_ctx = s->enc_write_ctx;
saved_state.write_hash = s->write_hash;
saved_state.compress = s->compress;
saved_state.session = s->session;
saved_state.epoch = DTLS_RECORD_LAYER_get_w_epoch(&s->rlayer);
s->d1->retransmitting = 1;
/* restore state in which the message was originally sent */
s->enc_write_ctx = frag->msg_header.saved_retransmit_state.enc_write_ctx;
s->write_hash = frag->msg_header.saved_retransmit_state.write_hash;
s->compress = frag->msg_header.saved_retransmit_state.compress;
s->session = frag->msg_header.saved_retransmit_state.session;
DTLS_RECORD_LAYER_set_saved_w_epoch(&s->rlayer,
frag->msg_header.
saved_retransmit_state.epoch);
ret = dtls1_do_write(s, frag->msg_header.is_ccs ?
SSL3_RT_CHANGE_CIPHER_SPEC : SSL3_RT_HANDSHAKE);
/* restore current state */
s->enc_write_ctx = saved_state.enc_write_ctx;
s->write_hash = saved_state.write_hash;
s->compress = saved_state.compress;
s->session = saved_state.session;
DTLS_RECORD_LAYER_set_saved_w_epoch(&s->rlayer, saved_state.epoch);
s->d1->retransmitting = 0;
(void)BIO_flush(s->wbio);
return ret;
}
2005-04-27 00:02:40 +08:00
void dtls1_set_message_header(SSL *s,
unsigned char mt, size_t len,
size_t frag_off, size_t frag_len)
{
if (frag_off == 0) {
s->d1->handshake_write_seq = s->d1->next_handshake_write_seq;
s->d1->next_handshake_write_seq++;
}
2007-09-20 00:38:15 +08:00
dtls1_set_message_header_int(s, mt, len, s->d1->handshake_write_seq,
frag_off, frag_len);
}
2005-04-27 00:02:40 +08:00
/* don't actually do the writing, wait till the MTU has been retrieved */
static void
dtls1_set_message_header_int(SSL *s, unsigned char mt,
size_t len, unsigned short seq_num,
size_t frag_off, size_t frag_len)
{
struct hm_header_st *msg_hdr = &s->d1->w_msg_hdr;
msg_hdr->type = mt;
msg_hdr->msg_len = len;
msg_hdr->seq = seq_num;
msg_hdr->frag_off = frag_off;
msg_hdr->frag_len = frag_len;
}
2005-04-27 00:02:40 +08:00
static void
dtls1_fix_message_header(SSL *s, size_t frag_off, size_t frag_len)
{
struct hm_header_st *msg_hdr = &s->d1->w_msg_hdr;
2005-04-27 00:02:40 +08:00
msg_hdr->frag_off = frag_off;
msg_hdr->frag_len = frag_len;
}
2007-09-20 00:38:15 +08:00
static unsigned char *dtls1_write_message_header(SSL *s, unsigned char *p)
{
struct hm_header_st *msg_hdr = &s->d1->w_msg_hdr;
2007-09-20 00:38:15 +08:00
*p++ = msg_hdr->type;
l2n3(msg_hdr->msg_len, p);
2007-09-20 00:38:15 +08:00
s2n(msg_hdr->seq, p);
l2n3(msg_hdr->frag_off, p);
l2n3(msg_hdr->frag_len, p);
2005-04-27 00:02:40 +08:00
return p;
}
2005-04-27 00:02:40 +08:00
void dtls1_get_message_header(unsigned char *data, struct hm_header_st *msg_hdr)
{
memset(msg_hdr, 0, sizeof(*msg_hdr));
msg_hdr->type = *(data++);
n2l3(data, msg_hdr->msg_len);
2007-09-20 00:38:15 +08:00
n2s(data, msg_hdr->seq);
n2l3(data, msg_hdr->frag_off);
n2l3(data, msg_hdr->frag_len);
}
int dtls1_set_handshake_header(SSL *s, WPACKET *pkt, int htype)
{
unsigned char *header;
if (htype == SSL3_MT_CHANGE_CIPHER_SPEC) {
s->d1->handshake_write_seq = s->d1->next_handshake_write_seq;
dtls1_set_message_header_int(s, SSL3_MT_CCS, 0,
s->d1->handshake_write_seq, 0, 0);
if (!WPACKET_put_bytes_u8(pkt, SSL3_MT_CCS))
return 0;
} else {
dtls1_set_message_header(s, htype, 0, 0, 0);
/*
* We allocate space at the start for the message header. This gets
* filled in later
*/
if (!WPACKET_allocate_bytes(pkt, DTLS1_HM_HEADER_LENGTH, &header)
|| !WPACKET_start_sub_packet(pkt))
return 0;
}
return 1;
}
int dtls1_close_construct_packet(SSL *s, WPACKET *pkt, int htype)
{
size_t msglen;
if ((htype != SSL3_MT_CHANGE_CIPHER_SPEC && !WPACKET_close(pkt))
|| !WPACKET_get_length(pkt, &msglen)
|| msglen > INT_MAX)
return 0;
if (htype != SSL3_MT_CHANGE_CIPHER_SPEC) {
s->d1->w_msg_hdr.msg_len = msglen - DTLS1_HM_HEADER_LENGTH;
s->d1->w_msg_hdr.frag_len = msglen - DTLS1_HM_HEADER_LENGTH;
}
s->init_num = (int)msglen;
s->init_off = 0;
if (htype != DTLS1_MT_HELLO_VERIFY_REQUEST) {
/* Buffer the message to handle re-xmits */
if (!dtls1_buffer_message(s, htype == SSL3_MT_CHANGE_CIPHER_SPEC
? 1 : 0))
return 0;
}
return 1;
}