mirror/openssl
2
0
Fork 0
mirror of https://github.com/openssl/openssl.git synced 2024-12-09 05:51:54 +08:00
Code Issues Packages Projects Releases Wiki Activity
a4a18b2f89
openssl/test/ssl-tests/05-sni.conf

169 lines
4.2 KiB
Plaintext
Raw Normal View History

Fix session ticket and SNI When session tickets are used, it's possible that SNI might swtich the SSL_CTX on an SSL. Normally, this is not a problem, because the initial_ctx/session_ctx are used for all session ticket/id processes. However, when the SNI callback occurs, it's possible that the callback may update the options in the SSL from the SSL_CTX, and this could cause SSL_OP_NO_TICKET to be set. If this occurs, then two bad things can happen: 1. The session ticket TLSEXT may not be written when the ticket expected flag is set. The state machine transistions to writing the ticket, and the client responds with an error as its not expecting a ticket. 2. When creating the session ticket, if the ticket key cb returns 0 the crypto/hmac contexts are not initialized, and the code crashes when trying to encrypt the session ticket. To fix 1, if the ticket TLSEXT is not written out, clear the expected ticket flag. To fix 2, consider a return of 0 from the ticket key cb a recoverable error, and write a 0 length ticket and continue. The client-side code can explicitly handle this case. Fix these two cases, and add unit test code to validate ticket behavior. Reviewed-by: Emilia Käsper <emilia@openssl.org> Reviewed-by: Rich Salz <rsalz@openssl.org> (Merged from https://github.com/openssl/openssl/pull/1098)
2016-05-13 06:16:52 +08:00
# Generated with generate_ssl_tests.pl
SSL test framework: port SNI tests Observe that the old tests were partly ill-defined: setting sn_server1 but not sn_server2 in ssltest_old.c does not enable the SNI callback. Fix this, and also explicitly test both flavours of SNI mismatch (ignore / fatal alert). Tests still pass. Reviewed-by: Rich Salz <rsalz@openssl.org>
2016-06-20 23:20:25 +08:00
num_tests = 6
Fix session ticket and SNI When session tickets are used, it's possible that SNI might swtich the SSL_CTX on an SSL. Normally, this is not a problem, because the initial_ctx/session_ctx are used for all session ticket/id processes. However, when the SNI callback occurs, it's possible that the callback may update the options in the SSL from the SSL_CTX, and this could cause SSL_OP_NO_TICKET to be set. If this occurs, then two bad things can happen: 1. The session ticket TLSEXT may not be written when the ticket expected flag is set. The state machine transistions to writing the ticket, and the client responds with an error as its not expecting a ticket. 2. When creating the session ticket, if the ticket key cb returns 0 the crypto/hmac contexts are not initialized, and the code crashes when trying to encrypt the session ticket. To fix 1, if the ticket TLSEXT is not written out, clear the expected ticket flag. To fix 2, consider a return of 0 from the ticket key cb a recoverable error, and write a 0 length ticket and continue. The client-side code can explicitly handle this case. Fix these two cases, and add unit test code to validate ticket behavior. Reviewed-by: Emilia Käsper <emilia@openssl.org> Reviewed-by: Rich Salz <rsalz@openssl.org> (Merged from https://github.com/openssl/openssl/pull/1098)
2016-05-13 06:16:52 +08:00
SSL test framework: port SNI tests Observe that the old tests were partly ill-defined: setting sn_server1 but not sn_server2 in ssltest_old.c does not enable the SNI callback. Fix this, and also explicitly test both flavours of SNI mismatch (ignore / fatal alert). Tests still pass. Reviewed-by: Rich Salz <rsalz@openssl.org>
2016-06-20 23:20:25 +08:00
test-0 = 0-SNI-switch-context
test-1 = 1-SNI-keep-context
test-2 = 2-SNI-no-server-support
test-3 = 3-SNI-no-client-support
test-4 = 4-SNI-bad-sni-ignore-mismatch
test-5 = 5-SNI-bad-sni-reject-mismatch
Fix session ticket and SNI When session tickets are used, it's possible that SNI might swtich the SSL_CTX on an SSL. Normally, this is not a problem, because the initial_ctx/session_ctx are used for all session ticket/id processes. However, when the SNI callback occurs, it's possible that the callback may update the options in the SSL from the SSL_CTX, and this could cause SSL_OP_NO_TICKET to be set. If this occurs, then two bad things can happen: 1. The session ticket TLSEXT may not be written when the ticket expected flag is set. The state machine transistions to writing the ticket, and the client responds with an error as its not expecting a ticket. 2. When creating the session ticket, if the ticket key cb returns 0 the crypto/hmac contexts are not initialized, and the code crashes when trying to encrypt the session ticket. To fix 1, if the ticket TLSEXT is not written out, clear the expected ticket flag. To fix 2, consider a return of 0 from the ticket key cb a recoverable error, and write a 0 length ticket and continue. The client-side code can explicitly handle this case. Fix these two cases, and add unit test code to validate ticket behavior. Reviewed-by: Emilia Käsper <emilia@openssl.org> Reviewed-by: Rich Salz <rsalz@openssl.org> (Merged from https://github.com/openssl/openssl/pull/1098)
2016-05-13 06:16:52 +08:00
# ===========================================================
SSL test framework: port SNI tests Observe that the old tests were partly ill-defined: setting sn_server1 but not sn_server2 in ssltest_old.c does not enable the SNI callback. Fix this, and also explicitly test both flavours of SNI mismatch (ignore / fatal alert). Tests still pass. Reviewed-by: Rich Salz <rsalz@openssl.org>
2016-06-20 23:20:25 +08:00
[0-SNI-switch-context]
ssl_conf = 0-SNI-switch-context-ssl
Fix session ticket and SNI When session tickets are used, it's possible that SNI might swtich the SSL_CTX on an SSL. Normally, this is not a problem, because the initial_ctx/session_ctx are used for all session ticket/id processes. However, when the SNI callback occurs, it's possible that the callback may update the options in the SSL from the SSL_CTX, and this could cause SSL_OP_NO_TICKET to be set. If this occurs, then two bad things can happen: 1. The session ticket TLSEXT may not be written when the ticket expected flag is set. The state machine transistions to writing the ticket, and the client responds with an error as its not expecting a ticket. 2. When creating the session ticket, if the ticket key cb returns 0 the crypto/hmac contexts are not initialized, and the code crashes when trying to encrypt the session ticket. To fix 1, if the ticket TLSEXT is not written out, clear the expected ticket flag. To fix 2, consider a return of 0 from the ticket key cb a recoverable error, and write a 0 length ticket and continue. The client-side code can explicitly handle this case. Fix these two cases, and add unit test code to validate ticket behavior. Reviewed-by: Emilia Käsper <emilia@openssl.org> Reviewed-by: Rich Salz <rsalz@openssl.org> (Merged from https://github.com/openssl/openssl/pull/1098)
2016-05-13 06:16:52 +08:00
SSL test framework: port SNI tests Observe that the old tests were partly ill-defined: setting sn_server1 but not sn_server2 in ssltest_old.c does not enable the SNI callback. Fix this, and also explicitly test both flavours of SNI mismatch (ignore / fatal alert). Tests still pass. Reviewed-by: Rich Salz <rsalz@openssl.org>
2016-06-20 23:20:25 +08:00
[0-SNI-switch-context-ssl]
server = 0-SNI-switch-context-server
client = 0-SNI-switch-context-client
SSL tests: compress generated output a little Don't emit duplicate server/client sections when they are identical. Instead, just point to the same section. Reviewed-by: Rich Salz <rsalz@openssl.org>
2016-07-22 01:19:07 +08:00
server2 = 0-SNI-switch-context-server
Fix session ticket and SNI When session tickets are used, it's possible that SNI might swtich the SSL_CTX on an SSL. Normally, this is not a problem, because the initial_ctx/session_ctx are used for all session ticket/id processes. However, when the SNI callback occurs, it's possible that the callback may update the options in the SSL from the SSL_CTX, and this could cause SSL_OP_NO_TICKET to be set. If this occurs, then two bad things can happen: 1. The session ticket TLSEXT may not be written when the ticket expected flag is set. The state machine transistions to writing the ticket, and the client responds with an error as its not expecting a ticket. 2. When creating the session ticket, if the ticket key cb returns 0 the crypto/hmac contexts are not initialized, and the code crashes when trying to encrypt the session ticket. To fix 1, if the ticket TLSEXT is not written out, clear the expected ticket flag. To fix 2, consider a return of 0 from the ticket key cb a recoverable error, and write a 0 length ticket and continue. The client-side code can explicitly handle this case. Fix these two cases, and add unit test code to validate ticket behavior. Reviewed-by: Emilia Käsper <emilia@openssl.org> Reviewed-by: Rich Salz <rsalz@openssl.org> (Merged from https://github.com/openssl/openssl/pull/1098)
2016-05-13 06:16:52 +08:00
SSL test framework: port SNI tests Observe that the old tests were partly ill-defined: setting sn_server1 but not sn_server2 in ssltest_old.c does not enable the SNI callback. Fix this, and also explicitly test both flavours of SNI mismatch (ignore / fatal alert). Tests still pass. Reviewed-by: Rich Salz <rsalz@openssl.org>
2016-06-20 23:20:25 +08:00
[0-SNI-switch-context-server]
Fix session ticket and SNI When session tickets are used, it's possible that SNI might swtich the SSL_CTX on an SSL. Normally, this is not a problem, because the initial_ctx/session_ctx are used for all session ticket/id processes. However, when the SNI callback occurs, it's possible that the callback may update the options in the SSL from the SSL_CTX, and this could cause SSL_OP_NO_TICKET to be set. If this occurs, then two bad things can happen: 1. The session ticket TLSEXT may not be written when the ticket expected flag is set. The state machine transistions to writing the ticket, and the client responds with an error as its not expecting a ticket. 2. When creating the session ticket, if the ticket key cb returns 0 the crypto/hmac contexts are not initialized, and the code crashes when trying to encrypt the session ticket. To fix 1, if the ticket TLSEXT is not written out, clear the expected ticket flag. To fix 2, consider a return of 0 from the ticket key cb a recoverable error, and write a 0 length ticket and continue. The client-side code can explicitly handle this case. Fix these two cases, and add unit test code to validate ticket behavior. Reviewed-by: Emilia Käsper <emilia@openssl.org> Reviewed-by: Rich Salz <rsalz@openssl.org> (Merged from https://github.com/openssl/openssl/pull/1098)
2016-05-13 06:16:52 +08:00
Certificate = ${ENV::TEST_CERTS_DIR}/servercert.pem
CipherString = DEFAULT
PrivateKey = ${ENV::TEST_CERTS_DIR}/serverkey.pem
SSL test framework: port SNI tests Observe that the old tests were partly ill-defined: setting sn_server1 but not sn_server2 in ssltest_old.c does not enable the SNI callback. Fix this, and also explicitly test both flavours of SNI mismatch (ignore / fatal alert). Tests still pass. Reviewed-by: Rich Salz <rsalz@openssl.org>
2016-06-20 23:20:25 +08:00
[0-SNI-switch-context-client]
Fix session ticket and SNI When session tickets are used, it's possible that SNI might swtich the SSL_CTX on an SSL. Normally, this is not a problem, because the initial_ctx/session_ctx are used for all session ticket/id processes. However, when the SNI callback occurs, it's possible that the callback may update the options in the SSL from the SSL_CTX, and this could cause SSL_OP_NO_TICKET to be set. If this occurs, then two bad things can happen: 1. The session ticket TLSEXT may not be written when the ticket expected flag is set. The state machine transistions to writing the ticket, and the client responds with an error as its not expecting a ticket. 2. When creating the session ticket, if the ticket key cb returns 0 the crypto/hmac contexts are not initialized, and the code crashes when trying to encrypt the session ticket. To fix 1, if the ticket TLSEXT is not written out, clear the expected ticket flag. To fix 2, consider a return of 0 from the ticket key cb a recoverable error, and write a 0 length ticket and continue. The client-side code can explicitly handle this case. Fix these two cases, and add unit test code to validate ticket behavior. Reviewed-by: Emilia Käsper <emilia@openssl.org> Reviewed-by: Rich Salz <rsalz@openssl.org> (Merged from https://github.com/openssl/openssl/pull/1098)
2016-05-13 06:16:52 +08:00
CipherString = DEFAULT
VerifyCAFile = ${ENV::TEST_CERTS_DIR}/rootcert.pem
VerifyMode = Peer
[test-0]
ExpectedResult = Success
SSL test framework: port SNI tests Observe that the old tests were partly ill-defined: setting sn_server1 but not sn_server2 in ssltest_old.c does not enable the SNI callback. Fix this, and also explicitly test both flavours of SNI mismatch (ignore / fatal alert). Tests still pass. Reviewed-by: Rich Salz <rsalz@openssl.org>
2016-06-20 23:20:25 +08:00
ExpectedServerName = server2
Fix session ticket and SNI When session tickets are used, it's possible that SNI might swtich the SSL_CTX on an SSL. Normally, this is not a problem, because the initial_ctx/session_ctx are used for all session ticket/id processes. However, when the SNI callback occurs, it's possible that the callback may update the options in the SSL from the SSL_CTX, and this could cause SSL_OP_NO_TICKET to be set. If this occurs, then two bad things can happen: 1. The session ticket TLSEXT may not be written when the ticket expected flag is set. The state machine transistions to writing the ticket, and the client responds with an error as its not expecting a ticket. 2. When creating the session ticket, if the ticket key cb returns 0 the crypto/hmac contexts are not initialized, and the code crashes when trying to encrypt the session ticket. To fix 1, if the ticket TLSEXT is not written out, clear the expected ticket flag. To fix 2, consider a return of 0 from the ticket key cb a recoverable error, and write a 0 length ticket and continue. The client-side code can explicitly handle this case. Fix these two cases, and add unit test code to validate ticket behavior. Reviewed-by: Emilia Käsper <emilia@openssl.org> Reviewed-by: Rich Salz <rsalz@openssl.org> (Merged from https://github.com/openssl/openssl/pull/1098)
2016-05-13 06:16:52 +08:00
ServerName = server2
SSL test framework: port SNI tests Observe that the old tests were partly ill-defined: setting sn_server1 but not sn_server2 in ssltest_old.c does not enable the SNI callback. Fix this, and also explicitly test both flavours of SNI mismatch (ignore / fatal alert). Tests still pass. Reviewed-by: Rich Salz <rsalz@openssl.org>
2016-06-20 23:20:25 +08:00
ServerNameCallback = IgnoreMismatch
# ===========================================================
[1-SNI-keep-context]
ssl_conf = 1-SNI-keep-context-ssl
[1-SNI-keep-context-ssl]
server = 1-SNI-keep-context-server
client = 1-SNI-keep-context-client
SSL tests: compress generated output a little Don't emit duplicate server/client sections when they are identical. Instead, just point to the same section. Reviewed-by: Rich Salz <rsalz@openssl.org>
2016-07-22 01:19:07 +08:00
server2 = 1-SNI-keep-context-server
SSL test framework: port SNI tests Observe that the old tests were partly ill-defined: setting sn_server1 but not sn_server2 in ssltest_old.c does not enable the SNI callback. Fix this, and also explicitly test both flavours of SNI mismatch (ignore / fatal alert). Tests still pass. Reviewed-by: Rich Salz <rsalz@openssl.org>
2016-06-20 23:20:25 +08:00
[1-SNI-keep-context-server]
Certificate = ${ENV::TEST_CERTS_DIR}/servercert.pem
CipherString = DEFAULT
PrivateKey = ${ENV::TEST_CERTS_DIR}/serverkey.pem
[1-SNI-keep-context-client]
CipherString = DEFAULT
VerifyCAFile = ${ENV::TEST_CERTS_DIR}/rootcert.pem
VerifyMode = Peer
[test-1]
ExpectedResult = Success
ExpectedServerName = server1
ServerName = server1
ServerNameCallback = IgnoreMismatch
# ===========================================================
[2-SNI-no-server-support]
ssl_conf = 2-SNI-no-server-support-ssl
[2-SNI-no-server-support-ssl]
server = 2-SNI-no-server-support-server
client = 2-SNI-no-server-support-client
[2-SNI-no-server-support-server]
Certificate = ${ENV::TEST_CERTS_DIR}/servercert.pem
CipherString = DEFAULT
PrivateKey = ${ENV::TEST_CERTS_DIR}/serverkey.pem
[2-SNI-no-server-support-client]
CipherString = DEFAULT
VerifyCAFile = ${ENV::TEST_CERTS_DIR}/rootcert.pem
VerifyMode = Peer
[test-2]
ExpectedResult = Success
ServerName = server1
# ===========================================================
[3-SNI-no-client-support]
ssl_conf = 3-SNI-no-client-support-ssl
[3-SNI-no-client-support-ssl]
server = 3-SNI-no-client-support-server
client = 3-SNI-no-client-support-client
SSL tests: compress generated output a little Don't emit duplicate server/client sections when they are identical. Instead, just point to the same section. Reviewed-by: Rich Salz <rsalz@openssl.org>
2016-07-22 01:19:07 +08:00
server2 = 3-SNI-no-client-support-server
SSL test framework: port SNI tests Observe that the old tests were partly ill-defined: setting sn_server1 but not sn_server2 in ssltest_old.c does not enable the SNI callback. Fix this, and also explicitly test both flavours of SNI mismatch (ignore / fatal alert). Tests still pass. Reviewed-by: Rich Salz <rsalz@openssl.org>
2016-06-20 23:20:25 +08:00
[3-SNI-no-client-support-server]
Certificate = ${ENV::TEST_CERTS_DIR}/servercert.pem
CipherString = DEFAULT
PrivateKey = ${ENV::TEST_CERTS_DIR}/serverkey.pem
[3-SNI-no-client-support-client]
CipherString = DEFAULT
VerifyCAFile = ${ENV::TEST_CERTS_DIR}/rootcert.pem
VerifyMode = Peer
[test-3]
ExpectedResult = Success
ExpectedServerName = server1
ServerNameCallback = IgnoreMismatch
# ===========================================================
[4-SNI-bad-sni-ignore-mismatch]
ssl_conf = 4-SNI-bad-sni-ignore-mismatch-ssl
[4-SNI-bad-sni-ignore-mismatch-ssl]
server = 4-SNI-bad-sni-ignore-mismatch-server
client = 4-SNI-bad-sni-ignore-mismatch-client
SSL tests: compress generated output a little Don't emit duplicate server/client sections when they are identical. Instead, just point to the same section. Reviewed-by: Rich Salz <rsalz@openssl.org>
2016-07-22 01:19:07 +08:00
server2 = 4-SNI-bad-sni-ignore-mismatch-server
SSL test framework: port SNI tests Observe that the old tests were partly ill-defined: setting sn_server1 but not sn_server2 in ssltest_old.c does not enable the SNI callback. Fix this, and also explicitly test both flavours of SNI mismatch (ignore / fatal alert). Tests still pass. Reviewed-by: Rich Salz <rsalz@openssl.org>
2016-06-20 23:20:25 +08:00
[4-SNI-bad-sni-ignore-mismatch-server]
Certificate = ${ENV::TEST_CERTS_DIR}/servercert.pem
CipherString = DEFAULT
PrivateKey = ${ENV::TEST_CERTS_DIR}/serverkey.pem
[4-SNI-bad-sni-ignore-mismatch-client]
CipherString = DEFAULT
VerifyCAFile = ${ENV::TEST_CERTS_DIR}/rootcert.pem
VerifyMode = Peer
[test-4]
ExpectedResult = Success
ExpectedServerName = server1
ServerName = invalid
ServerNameCallback = IgnoreMismatch
# ===========================================================
[5-SNI-bad-sni-reject-mismatch]
ssl_conf = 5-SNI-bad-sni-reject-mismatch-ssl
[5-SNI-bad-sni-reject-mismatch-ssl]
server = 5-SNI-bad-sni-reject-mismatch-server
client = 5-SNI-bad-sni-reject-mismatch-client
SSL tests: compress generated output a little Don't emit duplicate server/client sections when they are identical. Instead, just point to the same section. Reviewed-by: Rich Salz <rsalz@openssl.org>
2016-07-22 01:19:07 +08:00
server2 = 5-SNI-bad-sni-reject-mismatch-server
SSL test framework: port SNI tests Observe that the old tests were partly ill-defined: setting sn_server1 but not sn_server2 in ssltest_old.c does not enable the SNI callback. Fix this, and also explicitly test both flavours of SNI mismatch (ignore / fatal alert). Tests still pass. Reviewed-by: Rich Salz <rsalz@openssl.org>
2016-06-20 23:20:25 +08:00
[5-SNI-bad-sni-reject-mismatch-server]
Certificate = ${ENV::TEST_CERTS_DIR}/servercert.pem
CipherString = DEFAULT
PrivateKey = ${ENV::TEST_CERTS_DIR}/serverkey.pem
[5-SNI-bad-sni-reject-mismatch-client]
CipherString = DEFAULT
VerifyCAFile = ${ENV::TEST_CERTS_DIR}/rootcert.pem
VerifyMode = Peer
[test-5]
ExpectedResult = ServerFail
ServerAlert = UnrecognizedName
ServerName = invalid
ServerNameCallback = RejectMismatch
Fix session ticket and SNI When session tickets are used, it's possible that SNI might swtich the SSL_CTX on an SSL. Normally, this is not a problem, because the initial_ctx/session_ctx are used for all session ticket/id processes. However, when the SNI callback occurs, it's possible that the callback may update the options in the SSL from the SSL_CTX, and this could cause SSL_OP_NO_TICKET to be set. If this occurs, then two bad things can happen: 1. The session ticket TLSEXT may not be written when the ticket expected flag is set. The state machine transistions to writing the ticket, and the client responds with an error as its not expecting a ticket. 2. When creating the session ticket, if the ticket key cb returns 0 the crypto/hmac contexts are not initialized, and the code crashes when trying to encrypt the session ticket. To fix 1, if the ticket TLSEXT is not written out, clear the expected ticket flag. To fix 2, consider a return of 0 from the ticket key cb a recoverable error, and write a 0 length ticket and continue. The client-side code can explicitly handle this case. Fix these two cases, and add unit test code to validate ticket behavior. Reviewed-by: Emilia Käsper <emilia@openssl.org> Reviewed-by: Rich Salz <rsalz@openssl.org> (Merged from https://github.com/openssl/openssl/pull/1098)
2016-05-13 06:16:52 +08:00
Reference in New Issue Copy Permalink