openssl/apps/s_client.c

1649 lines
45 KiB
C
Raw Normal View History

/* apps/s_client.c */
/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
* All rights reserved.
*
* This package is an SSL implementation written
* by Eric Young (eay@cryptsoft.com).
* The implementation was written so as to conform with Netscapes SSL.
*
* This library is free for commercial and non-commercial use as long as
* the following conditions are aheared to. The following conditions
* apply to all code found in this distribution, be it the RC4, RSA,
* lhash, DES, etc., code; not just the SSL code. The SSL documentation
* included with this distribution is covered by the same copyright terms
* except that the holder is Tim Hudson (tjh@cryptsoft.com).
*
* Copyright remains Eric Young's, and as such any Copyright notices in
* the code are not to be removed.
* If this package is used in a product, Eric Young should be given attribution
* as the author of the parts of the library used.
* This can be in the form of a textual message at program startup or
* in documentation (online or textual) provided with the package.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* "This product includes cryptographic software written by
* Eric Young (eay@cryptsoft.com)"
* The word 'cryptographic' can be left out if the rouines from the library
* being used are not cryptographic related :-).
* 4. If you include any Windows specific code (or a derivative thereof) from
* the apps directory (application code) you must include an acknowledgement:
* "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
*
* THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* The licence and distribution terms for any publically available version or
* derivative of this code cannot be changed. i.e. this code cannot simply be
* copied and put under another distribution licence
* [including the GNU Public Licence.]
*/
/* ====================================================================
2006-01-03 07:29:12 +08:00
* Copyright (c) 1998-2006 The OpenSSL Project. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
*
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
*
* 3. All advertising materials mentioning features or use of this
* software must display the following acknowledgment:
* "This product includes software developed by the OpenSSL Project
* for use in the OpenSSL Toolkit. (http://www.openssl.org/)"
*
* 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
* endorse or promote products derived from this software without
* prior written permission. For written permission, please contact
* openssl-core@openssl.org.
*
* 5. Products derived from this software may not be called "OpenSSL"
* nor may "OpenSSL" appear in their names without prior written
* permission of the OpenSSL Project.
*
* 6. Redistributions of any form whatsoever must retain the following
* acknowledgment:
* "This product includes software developed by the OpenSSL Project
* for use in the OpenSSL Toolkit (http://www.openssl.org/)"
*
* THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
* EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
* PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE OpenSSL PROJECT OR
* ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
* OF THE POSSIBILITY OF SUCH DAMAGE.
* ====================================================================
*
* This product includes cryptographic software written by Eric Young
* (eay@cryptsoft.com). This product includes software written by Tim
* Hudson (tjh@cryptsoft.com).
*
*/
/* ====================================================================
* Copyright 2005 Nokia. All rights reserved.
*
* The portions of the attached software ("Contribution") is developed by
* Nokia Corporation and is licensed pursuant to the OpenSSL open source
* license.
*
* The Contribution, originally written by Mika Kousa and Pasi Eronen of
* Nokia Corporation, consists of the "PSK" (Pre-Shared Key) ciphersuites
* support (see RFC 4279) to OpenSSL.
*
* No patent licenses or other rights except those expressly stated in
* the OpenSSL open source license shall be deemed granted or received
* expressly, by implication, estoppel, or otherwise.
*
* No assurances are provided by Nokia that the Contribution does not
* infringe the patent or other intellectual property rights of any third
* party or that the license provides you with all the necessary rights
* to make use of the Contribution.
*
* THE SOFTWARE IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. IN
* ADDITION TO THE DISCLAIMERS INCLUDED IN THE LICENSE, NOKIA
* SPECIFICALLY DISCLAIMS ANY LIABILITY FOR CLAIMS BROUGHT BY YOU OR ANY
* OTHER ENTITY BASED ON INFRINGEMENT OF INTELLECTUAL PROPERTY RIGHTS OR
* OTHERWISE.
*/
1999-08-09 21:01:48 +08:00
#include <assert.h>
#include <ctype.h>
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <openssl/e_os2.h>
#ifdef OPENSSL_NO_STDIO
#define APPS_WIN16
#endif
/* With IPv6, it looks like Digital has mixed up the proper order of
recursive header file inclusion, resulting in the compiler complaining
that u_int isn't defined, but only if _POSIX_C_SOURCE is defined, which
is needed to have fileno() declared correctly... So let's define u_int */
#if defined(OPENSSL_SYS_VMS_DECC) && !defined(__U_INT)
#define __U_INT
typedef unsigned int u_int;
#endif
#define USE_SOCKETS
#include "apps.h"
#include <openssl/x509.h>
#include <openssl/ssl.h>
#include <openssl/err.h>
#include <openssl/pem.h>
#include <openssl/rand.h>
#include <openssl/ocsp.h>
#include "s_apps.h"
2005-04-27 00:02:40 +08:00
#include "timeouts.h"
#if (defined(OPENSSL_SYS_VMS) && __VMS_VER < 70000000)
1999-05-13 21:21:17 +08:00
/* FIONBIO used as a switch to enable ioctl, and that isn't in VMS < 7.0 */
#undef FIONBIO
#endif
#if defined(OPENSSL_SYS_BEOS_R5)
#include <fcntl.h>
#endif
#undef PROG
#define PROG s_client_main
/*#define SSL_HOST_NAME "www.netscape.com" */
/*#define SSL_HOST_NAME "193.118.187.102" */
#define SSL_HOST_NAME "localhost"
/*#define TEST_CERT "client.pem" */ /* no default cert. */
#undef BUFSIZZ
#define BUFSIZZ 1024*8
extern int verify_depth;
extern int verify_error;
extern int verify_return_error;
#ifdef FIONBIO
static int c_nbio=0;
#endif
static int c_Pause=0;
static int c_debug=0;
#ifndef OPENSSL_NO_TLSEXT
static int c_tlsextdebug=0;
static int c_status_req=0;
#endif
static int c_msg=0;
static int c_showcerts=0;
static void sc_usage(void);
static void print_stuff(BIO *berr,SSL *con,int full);
static int ocsp_resp_cb(SSL *s, void *arg);
static BIO *bio_c_out=NULL;
static int c_quiet=0;
static int c_ign_eof=0;
#ifndef OPENSSL_NO_PSK
/* Default PSK identity and key */
static char *psk_identity="Client_identity";
static char *psk_key=NULL; /* by default PSK is not used */
static unsigned int psk_client_cb(SSL *ssl, const char *hint, char *identity,
unsigned int max_identity_len, unsigned char *psk,
unsigned int max_psk_len)
{
unsigned int psk_len = 0;
int ret;
BIGNUM *bn=NULL;
if (c_debug)
BIO_printf(bio_c_out, "psk_client_cb\n");
if (!hint)
{
/* no ServerKeyExchange message*/
if (c_debug)
BIO_printf(bio_c_out,"NULL received PSK identity hint, continuing anyway\n");
}
else if (c_debug)
BIO_printf(bio_c_out, "Received PSK identity hint '%s'\n", hint);
/* lookup PSK identity and PSK key based on the given identity hint here */
ret = BIO_snprintf(identity, max_identity_len, psk_identity);
2006-03-11 20:18:11 +08:00
if (ret < 0 || (unsigned int)ret > max_identity_len)
goto out_err;
if (c_debug)
BIO_printf(bio_c_out, "created identity '%s' len=%d\n", identity, ret);
ret=BN_hex2bn(&bn, psk_key);
if (!ret)
{
BIO_printf(bio_err,"Could not convert PSK key '%s' to BIGNUM\n", psk_key);
if (bn)
BN_free(bn);
return 0;
}
2006-03-11 20:18:11 +08:00
if ((unsigned int)BN_num_bytes(bn) > max_psk_len)
{
BIO_printf(bio_err,"psk buffer of callback is too small (%d) for key (%d)\n",
max_psk_len, BN_num_bytes(bn));
BN_free(bn);
return 0;
}
psk_len=BN_bn2bin(bn, psk);
BN_free(bn);
if (psk_len == 0)
goto out_err;
if (c_debug)
BIO_printf(bio_c_out, "created PSK len=%d\n", psk_len);
return psk_len;
out_err:
if (c_debug)
BIO_printf(bio_err, "Error in PSK client callback\n");
return 0;
}
#endif
1999-04-20 05:31:43 +08:00
static void sc_usage(void)
{
BIO_printf(bio_err,"usage: s_client args\n");
BIO_printf(bio_err,"\n");
BIO_printf(bio_err," -host host - use -connect instead\n");
BIO_printf(bio_err," -port port - use -connect instead\n");
BIO_printf(bio_err," -connect host:port - who to connect to (default is %s:%s)\n",SSL_HOST_NAME,PORT_STR);
BIO_printf(bio_err," -verify arg - turn on peer certificate verification\n");
BIO_printf(bio_err," -cert arg - certificate file to use, PEM format assumed\n");
BIO_printf(bio_err," -certform arg - certificate format (PEM or DER) PEM default\n");
BIO_printf(bio_err," -key arg - Private key file to use, in cert file if\n");
BIO_printf(bio_err," not specified but cert file is.\n");
BIO_printf(bio_err," -keyform arg - key format (PEM or DER) PEM default\n");
BIO_printf(bio_err," -pass arg - private key file pass phrase source\n");
BIO_printf(bio_err," -CApath arg - PEM format directory of CA's\n");
BIO_printf(bio_err," -CAfile arg - PEM format file of CA's\n");
BIO_printf(bio_err," -reconnect - Drop and re-make the connection with the same Session-ID\n");
BIO_printf(bio_err," -pause - sleep(1) after each read(2) and write(2) system call\n");
BIO_printf(bio_err," -showcerts - show all certificates in the chain\n");
BIO_printf(bio_err," -debug - extra output\n");
#ifdef WATT32
BIO_printf(bio_err," -wdebug - WATT-32 tcp debugging\n");
#endif
BIO_printf(bio_err," -msg - Show protocol messages\n");
BIO_printf(bio_err," -nbio_test - more ssl protocol testing\n");
BIO_printf(bio_err," -state - print the 'ssl' states\n");
#ifdef FIONBIO
BIO_printf(bio_err," -nbio - Run with non-blocking IO\n");
#endif
BIO_printf(bio_err," -crlf - convert LF from terminal into CRLF\n");
BIO_printf(bio_err," -quiet - no s_client output\n");
BIO_printf(bio_err," -ign_eof - ignore input eof (default when -quiet)\n");
#ifndef OPENSSL_NO_PSK
BIO_printf(bio_err," -psk_identity arg - PSK identity\n");
BIO_printf(bio_err," -psk arg - PSK in hex (without 0x)\n");
#endif
BIO_printf(bio_err," -ssl2 - just use SSLv2\n");
BIO_printf(bio_err," -ssl3 - just use SSLv3\n");
BIO_printf(bio_err," -tls1 - just use TLSv1\n");
2005-04-27 00:02:40 +08:00
BIO_printf(bio_err," -dtls1 - just use DTLSv1\n");
BIO_printf(bio_err," -mtu - set the MTU\n");
BIO_printf(bio_err," -no_tls1/-no_ssl3/-no_ssl2 - turn off that protocol\n");
BIO_printf(bio_err," -bugs - Switch on all SSL implementation bug workarounds\n");
BIO_printf(bio_err," -serverpref - Use server's cipher preferences (only SSLv2)\n");
2000-02-04 07:23:24 +08:00
BIO_printf(bio_err," -cipher - preferred cipher to use, use the 'openssl ciphers'\n");
BIO_printf(bio_err," command to see what is available\n");
BIO_printf(bio_err," -starttls prot - use the STARTTLS command before starting TLS\n");
BIO_printf(bio_err," for those protocols that support it, where\n");
BIO_printf(bio_err," 'prot' defines which one to assume. Currently,\n");
BIO_printf(bio_err," only \"smtp\", \"pop3\", \"imap\", and \"ftp\" are supported.\n");
#ifndef OPENSSL_NO_ENGINE
BIO_printf(bio_err," -engine id - Initialise and use the specified engine\n");
#endif
BIO_printf(bio_err," -rand file%cfile%c...\n", LIST_SEPARATOR_CHAR, LIST_SEPARATOR_CHAR);
BIO_printf(bio_err," -sess_out arg - file to write SSL session to\n");
BIO_printf(bio_err," -sess_in arg - file to read SSL session from\n");
#ifndef OPENSSL_NO_TLSEXT
BIO_printf(bio_err," -servername host - Set TLS extension servername in ClientHello\n");
BIO_printf(bio_err," -tlsextdebug - hex dump of all TLS extensions received\n");
BIO_printf(bio_err," -status - request certificate status from server\n");
BIO_printf(bio_err," -no_ticket - disable use of RFC4507bis session tickets\n");
#endif
}
#ifndef OPENSSL_NO_TLSEXT
/* This is a context that we pass to callbacks */
typedef struct tlsextctx_st {
BIO * biodebug;
int ack;
} tlsextctx;
2006-01-03 07:29:12 +08:00
static int MS_CALLBACK ssl_servername_cb(SSL *s, int *ad, void *arg)
{
tlsextctx * p = (tlsextctx *) arg;
2006-01-04 20:02:43 +08:00
const char * hn= SSL_get_servername(s, TLSEXT_NAMETYPE_host_name);
if (SSL_get_servername_type(s) != -1)
p->ack = !SSL_session_reused(s) && hn != NULL;
else
BIO_printf(bio_err,"Can't use SSL_get_servername\n");
return SSL_TLSEXT_ERR_OK;
2006-01-03 07:29:12 +08:00
}
#endif
enum
{
PROTO_OFF = 0,
PROTO_SMTP,
PROTO_POP3,
PROTO_IMAP,
2007-02-19 02:21:57 +08:00
PROTO_FTP
};
int MAIN(int, char **);
1999-04-20 05:31:43 +08:00
int MAIN(int argc, char **argv)
{
int off=0;
SSL *con=NULL;
X509_STORE *store = NULL;
int s,k,width,state=0;
char *cbuf=NULL,*sbuf=NULL,*mbuf=NULL;
int cbuf_len,cbuf_off;
int sbuf_len,sbuf_off;
fd_set readfds,writefds;
short port=PORT;
int full_log=1;
char *host=SSL_HOST_NAME;
char *cert_file=NULL,*key_file=NULL;
int cert_format = FORMAT_PEM, key_format = FORMAT_PEM;
char *passarg = NULL, *pass = NULL;
X509 *cert = NULL;
EVP_PKEY *key = NULL;
char *CApath=NULL,*CAfile=NULL,*cipher=NULL;
int reconnect=0,badop=0,verify=SSL_VERIFY_NONE,bugs=0;
int crlf=0;
int write_tty,read_tty,write_ssl,read_ssl,tty_on,ssl_pending;
SSL_CTX *ctx=NULL;
int ret=1,in_init=1,i,nbio_test=0;
int starttls_proto = PROTO_OFF;
int prexit = 0, vflags = 0;
const SSL_METHOD *meth=NULL;
2006-01-03 07:29:12 +08:00
int socket_type=SOCK_STREAM;
BIO *sbio;
char *inrand=NULL;
int mbuf_len=0;
#ifndef OPENSSL_NO_ENGINE
char *engine_id=NULL;
ENGINE *e=NULL;
#endif
#if defined(OPENSSL_SYS_WINDOWS) || defined(OPENSSL_SYS_MSDOS) || defined(OPENSSL_SYS_NETWARE) || defined(OPENSSL_SYS_BEOS_R5)
struct timeval tv;
#if defined(OPENSSL_SYS_BEOS_R5)
int stdin_set = 0;
#endif
#endif
#ifndef OPENSSL_NO_TLSEXT
char *servername = NULL;
tlsextctx tlsextcbp =
{NULL,0};
#endif
char *sess_in = NULL;
char *sess_out = NULL;
2005-04-27 00:02:40 +08:00
struct sockaddr peer;
int peerlen = sizeof(peer);
2005-04-27 00:02:40 +08:00
int enable_timeouts = 0 ;
2006-01-03 07:29:12 +08:00
long socket_mtu = 0;
2005-04-27 00:02:40 +08:00
#if !defined(OPENSSL_NO_SSL2) && !defined(OPENSSL_NO_SSL3)
meth=SSLv23_client_method();
#elif !defined(OPENSSL_NO_SSL3)
meth=SSLv3_client_method();
#elif !defined(OPENSSL_NO_SSL2)
meth=SSLv2_client_method();
#endif
apps_startup();
c_Pause=0;
c_quiet=0;
c_ign_eof=0;
c_debug=0;
c_msg=0;
c_showcerts=0;
if (bio_err == NULL)
bio_err=BIO_new_fp(stderr,BIO_NOCLOSE);
if (!load_config(bio_err, NULL))
goto end;
if ( ((cbuf=OPENSSL_malloc(BUFSIZZ)) == NULL) ||
((sbuf=OPENSSL_malloc(BUFSIZZ)) == NULL) ||
((mbuf=OPENSSL_malloc(BUFSIZZ)) == NULL))
{
BIO_printf(bio_err,"out of memory\n");
goto end;
}
verify_depth=0;
verify_error=X509_V_OK;
#ifdef FIONBIO
c_nbio=0;
#endif
argc--;
argv++;
while (argc >= 1)
{
if (strcmp(*argv,"-host") == 0)
{
if (--argc < 1) goto bad;
host= *(++argv);
}
else if (strcmp(*argv,"-port") == 0)
{
if (--argc < 1) goto bad;
port=atoi(*(++argv));
if (port == 0) goto bad;
}
else if (strcmp(*argv,"-connect") == 0)
{
if (--argc < 1) goto bad;
if (!extract_host_port(*(++argv),&host,NULL,&port))
goto bad;
}
else if (strcmp(*argv,"-verify") == 0)
{
verify=SSL_VERIFY_PEER;
if (--argc < 1) goto bad;
verify_depth=atoi(*(++argv));
BIO_printf(bio_err,"verify depth is %d\n",verify_depth);
}
else if (strcmp(*argv,"-cert") == 0)
{
if (--argc < 1) goto bad;
cert_file= *(++argv);
}
else if (strcmp(*argv,"-sess_out") == 0)
{
if (--argc < 1) goto bad;
sess_out = *(++argv);
}
else if (strcmp(*argv,"-sess_in") == 0)
{
if (--argc < 1) goto bad;
sess_in = *(++argv);
}
else if (strcmp(*argv,"-certform") == 0)
{
if (--argc < 1) goto bad;
cert_format = str2fmt(*(++argv));
}
else if (strcmp(*argv,"-crl_check") == 0)
vflags |= X509_V_FLAG_CRL_CHECK;
else if (strcmp(*argv,"-crl_check_all") == 0)
vflags |= X509_V_FLAG_CRL_CHECK|X509_V_FLAG_CRL_CHECK_ALL;
else if (strcmp(*argv,"-verify_return_error") == 0)
verify_return_error = 1;
else if (strcmp(*argv,"-prexit") == 0)
prexit=1;
else if (strcmp(*argv,"-crlf") == 0)
crlf=1;
else if (strcmp(*argv,"-quiet") == 0)
{
c_quiet=1;
c_ign_eof=1;
}
else if (strcmp(*argv,"-ign_eof") == 0)
c_ign_eof=1;
else if (strcmp(*argv,"-pause") == 0)
c_Pause=1;
else if (strcmp(*argv,"-debug") == 0)
c_debug=1;
#ifndef OPENSSL_NO_TLSEXT
else if (strcmp(*argv,"-tlsextdebug") == 0)
c_tlsextdebug=1;
else if (strcmp(*argv,"-status") == 0)
c_status_req=1;
#endif
#ifdef WATT32
else if (strcmp(*argv,"-wdebug") == 0)
dbug_init();
#endif
else if (strcmp(*argv,"-msg") == 0)
c_msg=1;
else if (strcmp(*argv,"-showcerts") == 0)
c_showcerts=1;
else if (strcmp(*argv,"-nbio_test") == 0)
nbio_test=1;
else if (strcmp(*argv,"-state") == 0)
state=1;
#ifndef OPENSSL_NO_PSK
else if (strcmp(*argv,"-psk_identity") == 0)
{
if (--argc < 1) goto bad;
psk_identity=*(++argv);
}
else if (strcmp(*argv,"-psk") == 0)
{
size_t j;
if (--argc < 1) goto bad;
psk_key=*(++argv);
for (j = 0; j < strlen(psk_key); j++)
{
if (isxdigit((int)psk_key[j]))
continue;
BIO_printf(bio_err,"Not a hex number '%s'\n",*argv);
goto bad;
}
}
#endif
#ifndef OPENSSL_NO_SSL2
else if (strcmp(*argv,"-ssl2") == 0)
meth=SSLv2_client_method();
#endif
#ifndef OPENSSL_NO_SSL3
else if (strcmp(*argv,"-ssl3") == 0)
meth=SSLv3_client_method();
#endif
#ifndef OPENSSL_NO_TLS1
else if (strcmp(*argv,"-tls1") == 0)
meth=TLSv1_client_method();
2005-04-27 00:02:40 +08:00
#endif
#ifndef OPENSSL_NO_DTLS1
else if (strcmp(*argv,"-dtls1") == 0)
{
meth=DTLSv1_client_method();
2006-01-03 07:29:12 +08:00
socket_type=SOCK_DGRAM;
2005-04-27 00:02:40 +08:00
}
else if (strcmp(*argv,"-timeout") == 0)
enable_timeouts=1;
else if (strcmp(*argv,"-mtu") == 0)
{
if (--argc < 1) goto bad;
2006-01-03 07:29:12 +08:00
socket_mtu = atol(*(++argv));
2005-04-27 00:02:40 +08:00
}
#endif
else if (strcmp(*argv,"-bugs") == 0)
bugs=1;
else if (strcmp(*argv,"-keyform") == 0)
{
if (--argc < 1) goto bad;
key_format = str2fmt(*(++argv));
}
else if (strcmp(*argv,"-pass") == 0)
{
if (--argc < 1) goto bad;
passarg = *(++argv);
}
else if (strcmp(*argv,"-key") == 0)
{
if (--argc < 1) goto bad;
key_file= *(++argv);
}
else if (strcmp(*argv,"-reconnect") == 0)
{
reconnect=5;
}
else if (strcmp(*argv,"-CApath") == 0)
{
if (--argc < 1) goto bad;
CApath= *(++argv);
}
else if (strcmp(*argv,"-CAfile") == 0)
{
if (--argc < 1) goto bad;
CAfile= *(++argv);
}
else if (strcmp(*argv,"-no_tls1") == 0)
off|=SSL_OP_NO_TLSv1;
else if (strcmp(*argv,"-no_ssl3") == 0)
off|=SSL_OP_NO_SSLv3;
else if (strcmp(*argv,"-no_ssl2") == 0)
off|=SSL_OP_NO_SSLv2;
else if (strcmp(*argv,"-no_comp") == 0)
{ off|=SSL_OP_NO_COMPRESSION; }
#ifndef OPENSSL_NO_TLSEXT
else if (strcmp(*argv,"-no_ticket") == 0)
{ off|=SSL_OP_NO_TICKET; }
#endif
else if (strcmp(*argv,"-serverpref") == 0)
off|=SSL_OP_CIPHER_SERVER_PREFERENCE;
else if (strcmp(*argv,"-cipher") == 0)
{
if (--argc < 1) goto bad;
cipher= *(++argv);
}
#ifdef FIONBIO
else if (strcmp(*argv,"-nbio") == 0)
{ c_nbio=1; }
#endif
else if (strcmp(*argv,"-starttls") == 0)
{
if (--argc < 1) goto bad;
++argv;
if (strcmp(*argv,"smtp") == 0)
starttls_proto = PROTO_SMTP;
else if (strcmp(*argv,"pop3") == 0)
starttls_proto = PROTO_POP3;
else if (strcmp(*argv,"imap") == 0)
starttls_proto = PROTO_IMAP;
else if (strcmp(*argv,"ftp") == 0)
starttls_proto = PROTO_FTP;
else
goto bad;
}
#ifndef OPENSSL_NO_ENGINE
else if (strcmp(*argv,"-engine") == 0)
{
if (--argc < 1) goto bad;
engine_id = *(++argv);
}
#endif
else if (strcmp(*argv,"-rand") == 0)
{
if (--argc < 1) goto bad;
inrand= *(++argv);
}
#ifndef OPENSSL_NO_TLSEXT
else if (strcmp(*argv,"-servername") == 0)
{
if (--argc < 1) goto bad;
servername= *(++argv);
/* meth=TLSv1_client_method(); */
}
#endif
else
{
BIO_printf(bio_err,"unknown option %s\n",*argv);
badop=1;
break;
}
argc--;
argv++;
}
if (badop)
{
bad:
sc_usage();
goto end;
}
OpenSSL_add_ssl_algorithms();
SSL_load_error_strings();
#ifndef OPENSSL_NO_ENGINE
e = setup_engine(bio_err, engine_id, 1);
#endif
if (!app_passwd(bio_err, passarg, NULL, &pass, NULL))
{
BIO_printf(bio_err, "Error getting password\n");
goto end;
}
if (key_file == NULL)
key_file = cert_file;
if (key_file)
{
key = load_key(bio_err, key_file, key_format, 0, pass, e,
"client certificate private key file");
if (!key)
{
ERR_print_errors(bio_err);
goto end;
}
}
if (cert_file)
{
cert = load_cert(bio_err,cert_file,cert_format,
NULL, e, "client certificate file");
if (!cert)
{
ERR_print_errors(bio_err);
goto end;
}
}
if (!app_RAND_load_file(NULL, bio_err, 1) && inrand == NULL
&& !RAND_status())
{
BIO_printf(bio_err,"warning, not much extra random data, consider using the -rand option\n");
}
if (inrand != NULL)
BIO_printf(bio_err,"%ld semi-random bytes loaded\n",
app_RAND_load_files(inrand));
if (bio_c_out == NULL)
{
if (c_quiet && !c_debug && !c_msg)
{
bio_c_out=BIO_new(BIO_s_null());
}
else
{
if (bio_c_out == NULL)
bio_c_out=BIO_new_fp(stdout,BIO_NOCLOSE);
}
}
ctx=SSL_CTX_new(meth);
if (ctx == NULL)
{
ERR_print_errors(bio_err);
goto end;
}
#ifndef OPENSSL_NO_PSK
if (psk_key != NULL)
{
if (c_debug)
BIO_printf(bio_c_out, "PSK key given, setting client callback\n");
SSL_CTX_set_psk_client_callback(ctx, psk_client_cb);
}
#endif
if (bugs)
SSL_CTX_set_options(ctx,SSL_OP_ALL|off);
else
SSL_CTX_set_options(ctx,off);
2005-04-27 00:02:40 +08:00
/* DTLS: partial reads end up discarding unread UDP bytes :-(
* Setting read ahead solves this problem.
*/
2006-01-03 07:29:12 +08:00
if (socket_type == SOCK_DGRAM) SSL_CTX_set_read_ahead(ctx, 1);
if (state) SSL_CTX_set_info_callback(ctx,apps_ssl_info_callback);
if (cipher != NULL)
if(!SSL_CTX_set_cipher_list(ctx,cipher)) {
2000-02-04 07:23:24 +08:00
BIO_printf(bio_err,"error setting cipher list\n");
ERR_print_errors(bio_err);
goto end;
}
#if 0
else
SSL_CTX_set_cipher_list(ctx,getenv("SSL_CIPHER"));
#endif
SSL_CTX_set_verify(ctx,verify,verify_callback);
if (!set_cert_key_stuff(ctx,cert,key))
goto end;
if ((!SSL_CTX_load_verify_locations(ctx,CAfile,CApath)) ||
(!SSL_CTX_set_default_verify_paths(ctx)))
{
2000-02-04 07:23:24 +08:00
/* BIO_printf(bio_err,"error setting default verify locations\n"); */
ERR_print_errors(bio_err);
/* goto end; */
}
store = SSL_CTX_get_cert_store(ctx);
X509_STORE_set_flags(store, vflags);
#ifndef OPENSSL_NO_TLSEXT
2006-01-03 07:29:12 +08:00
if (servername != NULL)
{
tlsextcbp.biodebug = bio_err;
SSL_CTX_set_tlsext_servername_callback(ctx, ssl_servername_cb);
SSL_CTX_set_tlsext_servername_arg(ctx, &tlsextcbp);
2006-01-03 07:29:12 +08:00
}
#endif
con=SSL_new(ctx);
if (sess_in)
{
SSL_SESSION *sess;
BIO *stmp = BIO_new_file(sess_in, "r");
if (!stmp)
{
BIO_printf(bio_err, "Can't open session file %s\n",
sess_in);
ERR_print_errors(bio_err);
goto end;
}
sess = PEM_read_bio_SSL_SESSION(stmp, NULL, 0, NULL);
BIO_free(stmp);
if (!sess)
{
BIO_printf(bio_err, "Can't open session file %s\n",
sess_in);
ERR_print_errors(bio_err);
goto end;
}
SSL_set_session(con, sess);
SSL_SESSION_free(sess);
}
#ifndef OPENSSL_NO_TLSEXT
2006-01-03 07:29:12 +08:00
if (servername != NULL)
{
if (!SSL_set_tlsext_host_name(con,servername))
2006-01-03 07:29:12 +08:00
{
BIO_printf(bio_err,"Unable to set TLS servername extension.\n");
ERR_print_errors(bio_err);
goto end;
2006-01-03 07:29:12 +08:00
}
}
#endif
#ifndef OPENSSL_NO_KRB5
if (con && (con->kssl_ctx = kssl_ctx_new()) != NULL)
{
kssl_ctx_setstring(con->kssl_ctx, KSSL_SERVER, host);
}
#endif /* OPENSSL_NO_KRB5 */
/* SSL_set_cipher_list(con,"RC4-MD5"); */
#if 0
#ifdef TLSEXT_TYPE_opaque_prf_input
SSL_set_tlsext_opaque_prf_input(con, "Test client", 11);
#endif
#endif
re_start:
2006-01-03 07:29:12 +08:00
if (init_client(&s,host,port,socket_type) == 0)
{
BIO_printf(bio_err,"connect:errno=%d\n",get_last_socket_error());
SHUTDOWN(s);
goto end;
}
BIO_printf(bio_c_out,"CONNECTED(%08X)\n",s);
#ifdef FIONBIO
if (c_nbio)
{
unsigned long l=1;
BIO_printf(bio_c_out,"turning on non blocking io\n");
if (BIO_socket_ioctl(s,FIONBIO,&l) < 0)
{
ERR_print_errors(bio_err);
goto end;
}
}
#endif
if (c_Pause & 0x01) con->debug=1;
2005-04-27 00:02:40 +08:00
if ( SSL_version(con) == DTLS1_VERSION)
{
struct timeval timeout;
sbio=BIO_new_dgram(s,BIO_NOCLOSE);
if (getsockname(s, &peer, (void *)&peerlen) < 0)
2005-04-27 00:02:40 +08:00
{
BIO_printf(bio_err, "getsockname:errno=%d\n",
get_last_socket_error());
SHUTDOWN(s);
goto end;
}
2007-08-13 01:44:32 +08:00
(void)BIO_ctrl_set_connected(sbio, 1, &peer);
2005-04-27 00:02:40 +08:00
2006-01-03 07:29:12 +08:00
if (enable_timeouts)
2005-04-27 00:02:40 +08:00
{
timeout.tv_sec = 0;
timeout.tv_usec = DGRAM_RCV_TIMEOUT;
BIO_ctrl(sbio, BIO_CTRL_DGRAM_SET_RECV_TIMEOUT, 0, &timeout);
timeout.tv_sec = 0;
timeout.tv_usec = DGRAM_SND_TIMEOUT;
BIO_ctrl(sbio, BIO_CTRL_DGRAM_SET_SEND_TIMEOUT, 0, &timeout);
}
2006-01-03 07:29:12 +08:00
if (socket_mtu > 0)
2005-04-27 00:02:40 +08:00
{
SSL_set_options(con, SSL_OP_NO_QUERY_MTU);
2006-01-03 07:29:12 +08:00
SSL_set_mtu(con, socket_mtu);
2005-04-27 00:02:40 +08:00
}
else
/* want to do MTU discovery */
BIO_ctrl(sbio, BIO_CTRL_DGRAM_MTU_DISCOVER, 0, NULL);
}
else
sbio=BIO_new_socket(s,BIO_NOCLOSE);
if (nbio_test)
{
BIO *test;
test=BIO_new(BIO_f_nbio_test());
sbio=BIO_push(test,sbio);
}
if (c_debug)
{
con->debug=1;
BIO_set_callback(sbio,bio_dump_callback);
BIO_set_callback_arg(sbio,(char *)bio_c_out);
}
if (c_msg)
{
SSL_set_msg_callback(con, msg_cb);
SSL_set_msg_callback_arg(con, bio_c_out);
}
#ifndef OPENSSL_NO_TLSEXT
if (c_tlsextdebug)
{
SSL_set_tlsext_debug_callback(con, tlsext_cb);
SSL_set_tlsext_debug_arg(con, bio_c_out);
}
if (c_status_req)
{
SSL_set_tlsext_status_type(con, TLSEXT_STATUSTYPE_ocsp);
SSL_CTX_set_tlsext_status_cb(ctx, ocsp_resp_cb);
SSL_CTX_set_tlsext_status_arg(ctx, bio_c_out);
#if 0
{
STACK_OF(OCSP_RESPID) *ids = sk_OCSP_RESPID_new_null();
OCSP_RESPID *id = OCSP_RESPID_new();
id->value.byKey = ASN1_OCTET_STRING_new();
id->type = V_OCSP_RESPID_KEY;
ASN1_STRING_set(id->value.byKey, "Hello World", -1);
sk_OCSP_RESPID_push(ids, id);
SSL_set_tlsext_status_ids(con, ids);
}
#endif
}
#endif
SSL_set_bio(con,sbio,sbio);
SSL_set_connect_state(con);
/* ok, lets connect */
width=SSL_get_fd(con)+1;
read_tty=1;
write_tty=0;
tty_on=0;
read_ssl=1;
write_ssl=1;
cbuf_len=0;
cbuf_off=0;
sbuf_len=0;
sbuf_off=0;
/* This is an ugly hack that does a lot of assumptions */
/* We do have to handle multi-line responses which may come
in a single packet or not. We therefore have to use
BIO_gets() which does need a buffering BIO. So during
the initial chitchat we do push a buffering BIO into the
chain that is removed again later on to not disturb the
rest of the s_client operation. */
if (starttls_proto == PROTO_SMTP)
{
int foundit=0;
BIO *fbio = BIO_new(BIO_f_buffer());
BIO_push(fbio, sbio);
/* wait for multi-line response to end from SMTP */
do
{
mbuf_len = BIO_gets(fbio,mbuf,BUFSIZZ);
}
while (mbuf_len>3 && mbuf[3]=='-');
/* STARTTLS command requires EHLO... */
BIO_printf(fbio,"EHLO openssl.client.net\r\n");
2007-08-13 01:44:32 +08:00
(void)BIO_flush(fbio);
/* wait for multi-line response to end EHLO SMTP response */
do
{
mbuf_len = BIO_gets(fbio,mbuf,BUFSIZZ);
if (strstr(mbuf,"STARTTLS"))
foundit=1;
}
while (mbuf_len>3 && mbuf[3]=='-');
2007-08-13 01:44:32 +08:00
(void)BIO_flush(fbio);
BIO_pop(fbio);
BIO_free(fbio);
if (!foundit)
BIO_printf(bio_err,
"didn't found starttls in server response,"
" try anyway...\n");
BIO_printf(sbio,"STARTTLS\r\n");
BIO_read(sbio,sbuf,BUFSIZZ);
}
else if (starttls_proto == PROTO_POP3)
{
BIO_read(sbio,mbuf,BUFSIZZ);
BIO_printf(sbio,"STLS\r\n");
BIO_read(sbio,sbuf,BUFSIZZ);
}
else if (starttls_proto == PROTO_IMAP)
{
int foundit=0;
BIO *fbio = BIO_new(BIO_f_buffer());
BIO_push(fbio, sbio);
BIO_gets(fbio,mbuf,BUFSIZZ);
/* STARTTLS command requires CAPABILITY... */
BIO_printf(fbio,". CAPABILITY\r\n");
2007-08-13 01:44:32 +08:00
(void)BIO_flush(fbio);
/* wait for multi-line CAPABILITY response */
do
{
mbuf_len = BIO_gets(fbio,mbuf,BUFSIZZ);
if (strstr(mbuf,"STARTTLS"))
foundit=1;
}
while (mbuf_len>3 && mbuf[0]!='.');
2007-08-13 01:44:32 +08:00
(void)BIO_flush(fbio);
BIO_pop(fbio);
BIO_free(fbio);
if (!foundit)
BIO_printf(bio_err,
"didn't found STARTTLS in server response,"
" try anyway...\n");
BIO_printf(sbio,". STARTTLS\r\n");
BIO_read(sbio,sbuf,BUFSIZZ);
}
else if (starttls_proto == PROTO_FTP)
{
BIO *fbio = BIO_new(BIO_f_buffer());
BIO_push(fbio, sbio);
/* wait for multi-line response to end from FTP */
do
{
mbuf_len = BIO_gets(fbio,mbuf,BUFSIZZ);
}
while (mbuf_len>3 && mbuf[3]=='-');
2007-08-13 01:44:32 +08:00
(void)BIO_flush(fbio);
BIO_pop(fbio);
BIO_free(fbio);
BIO_printf(sbio,"AUTH TLS\r\n");
BIO_read(sbio,sbuf,BUFSIZZ);
}
for (;;)
{
FD_ZERO(&readfds);
FD_ZERO(&writefds);
if (SSL_in_init(con) && !SSL_total_renegotiations(con))
{
in_init=1;
tty_on=0;
}
else
{
tty_on=1;
if (in_init)
{
in_init=0;
#if 0 /* This test doesn't really work as intended (needs to be fixed) */
#ifndef OPENSSL_NO_TLSEXT
if (servername != NULL && !SSL_session_reused(con))
{
BIO_printf(bio_c_out,"Server did %sacknowledge servername extension.\n",tlsextcbp.ack?"":"not ");
}
#endif
#endif
if (sess_out)
{
BIO *stmp = BIO_new_file(sess_out, "w");
if (stmp)
{
PEM_write_bio_SSL_SESSION(stmp, SSL_get_session(con));
BIO_free(stmp);
}
else
BIO_printf(bio_err, "Error writing session file %s\n", sess_out);
}
print_stuff(bio_c_out,con,full_log);
if (full_log > 0) full_log--;
if (starttls_proto)
{
BIO_printf(bio_err,"%s",mbuf);
/* We don't need to know any more */
starttls_proto = PROTO_OFF;
}
if (reconnect)
{
reconnect--;
BIO_printf(bio_c_out,"drop connection and then reconnect\n");
SSL_shutdown(con);
SSL_set_connect_state(con);
SHUTDOWN(SSL_get_fd(con));
goto re_start;
}
}
}
ssl_pending = read_ssl && SSL_pending(con);
if (!ssl_pending)
{
#if !defined(OPENSSL_SYS_WINDOWS) && !defined(OPENSSL_SYS_MSDOS) && !defined(OPENSSL_SYS_NETWARE) && !defined (OPENSSL_SYS_BEOS_R5)
if (tty_on)
{
if (read_tty) openssl_fdset(fileno(stdin),&readfds);
if (write_tty) openssl_fdset(fileno(stdout),&writefds);
}
if (read_ssl)
openssl_fdset(SSL_get_fd(con),&readfds);
if (write_ssl)
openssl_fdset(SSL_get_fd(con),&writefds);
#else
if(!tty_on || !write_tty) {
if (read_ssl)
openssl_fdset(SSL_get_fd(con),&readfds);
if (write_ssl)
openssl_fdset(SSL_get_fd(con),&writefds);
}
#endif
/* printf("mode tty(%d %d%d) ssl(%d%d)\n",
tty_on,read_tty,write_tty,read_ssl,write_ssl);*/
1999-05-13 21:21:17 +08:00
/* Note: under VMS with SOCKETSHR the second parameter
* is currently of type (int *) whereas under other
* systems it is (void *) if you don't have a cast it
* will choke the compiler: if you do have a cast then
* you can either go for (int *) or (void *).
*/
#if defined(OPENSSL_SYS_WINDOWS) || defined(OPENSSL_SYS_MSDOS)
/* Under Windows/DOS we make the assumption that we can
* always write to the tty: therefore if we need to
* write to the tty we just fall through. Otherwise
* we timeout the select every second and see if there
* are any keypresses. Note: this is a hack, in a proper
* Windows application we wouldn't do this.
*/
2000-02-21 04:59:21 +08:00
i=0;
if(!write_tty) {
if(read_tty) {
tv.tv_sec = 1;
tv.tv_usec = 0;
i=select(width,(void *)&readfds,(void *)&writefds,
NULL,&tv);
#if defined(OPENSSL_SYS_WINCE) || defined(OPENSSL_SYS_MSDOS)
2002-11-16 06:37:18 +08:00
if(!i && (!_kbhit() || !read_tty) ) continue;
#else
if(!i && (!((_kbhit()) || (WAIT_OBJECT_0 == WaitForSingleObject(GetStdHandle(STD_INPUT_HANDLE), 0))) || !read_tty) ) continue;
2002-11-16 06:37:18 +08:00
#endif
} else i=select(width,(void *)&readfds,(void *)&writefds,
NULL,NULL);
}
#elif defined(OPENSSL_SYS_NETWARE)
if(!write_tty) {
if(read_tty) {
tv.tv_sec = 1;
tv.tv_usec = 0;
i=select(width,(void *)&readfds,(void *)&writefds,
NULL,&tv);
} else i=select(width,(void *)&readfds,(void *)&writefds,
NULL,NULL);
}
#elif defined(OPENSSL_SYS_BEOS_R5)
/* Under BeOS-R5 the situation is similar to DOS */
i=0;
stdin_set = 0;
(void)fcntl(fileno(stdin), F_SETFL, O_NONBLOCK);
if(!write_tty) {
if(read_tty) {
tv.tv_sec = 1;
tv.tv_usec = 0;
i=select(width,(void *)&readfds,(void *)&writefds,
NULL,&tv);
if (read(fileno(stdin), sbuf, 0) >= 0)
stdin_set = 1;
if (!i && (stdin_set != 1 || !read_tty))
continue;
} else i=select(width,(void *)&readfds,(void *)&writefds,
NULL,NULL);
}
(void)fcntl(fileno(stdin), F_SETFL, 0);
#else
i=select(width,(void *)&readfds,(void *)&writefds,
NULL,NULL);
#endif
if ( i < 0)
{
BIO_printf(bio_err,"bad select %d\n",
get_last_socket_error());
goto shut;
/* goto end; */
}
}
if (!ssl_pending && FD_ISSET(SSL_get_fd(con),&writefds))
{
k=SSL_write(con,&(cbuf[cbuf_off]),
(unsigned int)cbuf_len);
switch (SSL_get_error(con,k))
{
case SSL_ERROR_NONE:
cbuf_off+=k;
cbuf_len-=k;
if (k <= 0) goto end;
/* we have done a write(con,NULL,0); */
if (cbuf_len <= 0)
{
read_tty=1;
write_ssl=0;
}
else /* if (cbuf_len > 0) */
{
read_tty=0;
write_ssl=1;
}
break;
case SSL_ERROR_WANT_WRITE:
BIO_printf(bio_c_out,"write W BLOCK\n");
write_ssl=1;
read_tty=0;
break;
case SSL_ERROR_WANT_READ:
BIO_printf(bio_c_out,"write R BLOCK\n");
write_tty=0;
read_ssl=1;
write_ssl=0;
break;
case SSL_ERROR_WANT_X509_LOOKUP:
BIO_printf(bio_c_out,"write X BLOCK\n");
break;
case SSL_ERROR_ZERO_RETURN:
if (cbuf_len != 0)
{
BIO_printf(bio_c_out,"shutdown\n");
1. Changes for s_client.c to make it return non-zero exit code in case of handshake failure 2. Changes to x509_certificate_type function (crypto/x509/x509type.c) to make it recognize GOST certificates as EVP_PKT_SIGN|EVP_PKT_EXCH (required for s3_srvr to accept GOST client certificates). 3. Changes to EVP - adding of function EVP_PKEY_CTX_get0_peerkey - Make function EVP_PKEY_derive_set_peerkey work for context with ENCRYPT operation, because we use peerkey field in the context to pass non-ephemeral secret key to GOST encrypt operation. - added EVP_PKEY_CTRL_SET_IV control command. It is really GOST-specific, but it is used in SSL code, so it has to go in some header file, available during libssl compilation 4. Fix to HMAC to avoid call of OPENSSL_cleanse on undefined data 5. Include des.h if KSSL_DEBUG is defined into some libssl files, to make debugging output which depends on constants defined there, work and other KSSL_DEBUG output fixes 6. Declaration of real GOST ciphersuites, two authentication methods SSL_aGOST94 and SSL_aGOST2001 and one key exchange method SSL_kGOST 7. Implementation of these methods. 8. Support for sending unsolicited serverhello extension if GOST ciphersuite is selected. It is require for interoperability with CryptoPro CSP 3.0 and 3.6 and controlled by SSL_OP_CRYPTOPRO_TLSEXT_BUG constant. This constant is added to SSL_OP_ALL, because it does nothing, if non-GOST ciphersuite is selected, and all implementation of GOST include compatibility with CryptoPro. 9. Support for CertificateVerify message without length field. It is another CryptoPro bug, but support is made unconditional, because it does no harm for draft-conforming implementation. 10. In tls1_mac extra copy of stream mac context is no more done. When I've written currently commited code I haven't read EVP_DigestSignFinal manual carefully enough and haven't noticed that it does an internal digest ctx copying. This implementation was tested against 1. CryptoPro CSP 3.6 client and server 2. Cryptopro CSP 3.0 server
2007-10-26 20:06:36 +08:00
ret = 0;
goto shut;
}
else
{
read_tty=1;
write_ssl=0;
break;
}
case SSL_ERROR_SYSCALL:
if ((k != 0) || (cbuf_len != 0))
{
BIO_printf(bio_err,"write:errno=%d\n",
get_last_socket_error());
goto shut;
}
else
{
read_tty=1;
write_ssl=0;
}
break;
case SSL_ERROR_SSL:
ERR_print_errors(bio_err);
goto shut;
}
}
#if defined(OPENSSL_SYS_WINDOWS) || defined(OPENSSL_SYS_MSDOS) || defined(OPENSSL_SYS_NETWARE) || defined(OPENSSL_SYS_BEOS_R5)
/* Assume Windows/DOS/BeOS can always write */
else if (!ssl_pending && write_tty)
#else
else if (!ssl_pending && FD_ISSET(fileno(stdout),&writefds))
#endif
{
#ifdef CHARSET_EBCDIC
ascii2ebcdic(&(sbuf[sbuf_off]),&(sbuf[sbuf_off]),sbuf_len);
#endif
i=raw_write_stdout(&(sbuf[sbuf_off]),sbuf_len);
if (i <= 0)
{
BIO_printf(bio_c_out,"DONE\n");
1. Changes for s_client.c to make it return non-zero exit code in case of handshake failure 2. Changes to x509_certificate_type function (crypto/x509/x509type.c) to make it recognize GOST certificates as EVP_PKT_SIGN|EVP_PKT_EXCH (required for s3_srvr to accept GOST client certificates). 3. Changes to EVP - adding of function EVP_PKEY_CTX_get0_peerkey - Make function EVP_PKEY_derive_set_peerkey work for context with ENCRYPT operation, because we use peerkey field in the context to pass non-ephemeral secret key to GOST encrypt operation. - added EVP_PKEY_CTRL_SET_IV control command. It is really GOST-specific, but it is used in SSL code, so it has to go in some header file, available during libssl compilation 4. Fix to HMAC to avoid call of OPENSSL_cleanse on undefined data 5. Include des.h if KSSL_DEBUG is defined into some libssl files, to make debugging output which depends on constants defined there, work and other KSSL_DEBUG output fixes 6. Declaration of real GOST ciphersuites, two authentication methods SSL_aGOST94 and SSL_aGOST2001 and one key exchange method SSL_kGOST 7. Implementation of these methods. 8. Support for sending unsolicited serverhello extension if GOST ciphersuite is selected. It is require for interoperability with CryptoPro CSP 3.0 and 3.6 and controlled by SSL_OP_CRYPTOPRO_TLSEXT_BUG constant. This constant is added to SSL_OP_ALL, because it does nothing, if non-GOST ciphersuite is selected, and all implementation of GOST include compatibility with CryptoPro. 9. Support for CertificateVerify message without length field. It is another CryptoPro bug, but support is made unconditional, because it does no harm for draft-conforming implementation. 10. In tls1_mac extra copy of stream mac context is no more done. When I've written currently commited code I haven't read EVP_DigestSignFinal manual carefully enough and haven't noticed that it does an internal digest ctx copying. This implementation was tested against 1. CryptoPro CSP 3.6 client and server 2. Cryptopro CSP 3.0 server
2007-10-26 20:06:36 +08:00
ret = 0;
goto shut;
/* goto end; */
}
sbuf_len-=i;;
sbuf_off+=i;
if (sbuf_len <= 0)
{
read_ssl=1;
write_tty=0;
}
}
else if (ssl_pending || FD_ISSET(SSL_get_fd(con),&readfds))
{
#ifdef RENEG
{ static int iiii; if (++iiii == 52) { SSL_renegotiate(con); iiii=0; } }
#endif
#if 1
k=SSL_read(con,sbuf,1024 /* BUFSIZZ */ );
#else
/* Demo for pending and peek :-) */
k=SSL_read(con,sbuf,16);
{ char zbuf[10240];
printf("read=%d pending=%d peek=%d\n",k,SSL_pending(con),SSL_peek(con,zbuf,10240));
}
#endif
switch (SSL_get_error(con,k))
{
case SSL_ERROR_NONE:
if (k <= 0)
goto end;
sbuf_off=0;
sbuf_len=k;
read_ssl=0;
write_tty=1;
break;
case SSL_ERROR_WANT_WRITE:
BIO_printf(bio_c_out,"read W BLOCK\n");
write_ssl=1;
read_tty=0;
break;
case SSL_ERROR_WANT_READ:
BIO_printf(bio_c_out,"read R BLOCK\n");
write_tty=0;
read_ssl=1;
if ((read_tty == 0) && (write_ssl == 0))
write_ssl=1;
break;
case SSL_ERROR_WANT_X509_LOOKUP:
BIO_printf(bio_c_out,"read X BLOCK\n");
break;
case SSL_ERROR_SYSCALL:
1. Changes for s_client.c to make it return non-zero exit code in case of handshake failure 2. Changes to x509_certificate_type function (crypto/x509/x509type.c) to make it recognize GOST certificates as EVP_PKT_SIGN|EVP_PKT_EXCH (required for s3_srvr to accept GOST client certificates). 3. Changes to EVP - adding of function EVP_PKEY_CTX_get0_peerkey - Make function EVP_PKEY_derive_set_peerkey work for context with ENCRYPT operation, because we use peerkey field in the context to pass non-ephemeral secret key to GOST encrypt operation. - added EVP_PKEY_CTRL_SET_IV control command. It is really GOST-specific, but it is used in SSL code, so it has to go in some header file, available during libssl compilation 4. Fix to HMAC to avoid call of OPENSSL_cleanse on undefined data 5. Include des.h if KSSL_DEBUG is defined into some libssl files, to make debugging output which depends on constants defined there, work and other KSSL_DEBUG output fixes 6. Declaration of real GOST ciphersuites, two authentication methods SSL_aGOST94 and SSL_aGOST2001 and one key exchange method SSL_kGOST 7. Implementation of these methods. 8. Support for sending unsolicited serverhello extension if GOST ciphersuite is selected. It is require for interoperability with CryptoPro CSP 3.0 and 3.6 and controlled by SSL_OP_CRYPTOPRO_TLSEXT_BUG constant. This constant is added to SSL_OP_ALL, because it does nothing, if non-GOST ciphersuite is selected, and all implementation of GOST include compatibility with CryptoPro. 9. Support for CertificateVerify message without length field. It is another CryptoPro bug, but support is made unconditional, because it does no harm for draft-conforming implementation. 10. In tls1_mac extra copy of stream mac context is no more done. When I've written currently commited code I haven't read EVP_DigestSignFinal manual carefully enough and haven't noticed that it does an internal digest ctx copying. This implementation was tested against 1. CryptoPro CSP 3.6 client and server 2. Cryptopro CSP 3.0 server
2007-10-26 20:06:36 +08:00
ret=get_last_socket_error();
BIO_printf(bio_err,"read:errno=%d\n",ret);
goto shut;
case SSL_ERROR_ZERO_RETURN:
BIO_printf(bio_c_out,"closed\n");
1. Changes for s_client.c to make it return non-zero exit code in case of handshake failure 2. Changes to x509_certificate_type function (crypto/x509/x509type.c) to make it recognize GOST certificates as EVP_PKT_SIGN|EVP_PKT_EXCH (required for s3_srvr to accept GOST client certificates). 3. Changes to EVP - adding of function EVP_PKEY_CTX_get0_peerkey - Make function EVP_PKEY_derive_set_peerkey work for context with ENCRYPT operation, because we use peerkey field in the context to pass non-ephemeral secret key to GOST encrypt operation. - added EVP_PKEY_CTRL_SET_IV control command. It is really GOST-specific, but it is used in SSL code, so it has to go in some header file, available during libssl compilation 4. Fix to HMAC to avoid call of OPENSSL_cleanse on undefined data 5. Include des.h if KSSL_DEBUG is defined into some libssl files, to make debugging output which depends on constants defined there, work and other KSSL_DEBUG output fixes 6. Declaration of real GOST ciphersuites, two authentication methods SSL_aGOST94 and SSL_aGOST2001 and one key exchange method SSL_kGOST 7. Implementation of these methods. 8. Support for sending unsolicited serverhello extension if GOST ciphersuite is selected. It is require for interoperability with CryptoPro CSP 3.0 and 3.6 and controlled by SSL_OP_CRYPTOPRO_TLSEXT_BUG constant. This constant is added to SSL_OP_ALL, because it does nothing, if non-GOST ciphersuite is selected, and all implementation of GOST include compatibility with CryptoPro. 9. Support for CertificateVerify message without length field. It is another CryptoPro bug, but support is made unconditional, because it does no harm for draft-conforming implementation. 10. In tls1_mac extra copy of stream mac context is no more done. When I've written currently commited code I haven't read EVP_DigestSignFinal manual carefully enough and haven't noticed that it does an internal digest ctx copying. This implementation was tested against 1. CryptoPro CSP 3.6 client and server 2. Cryptopro CSP 3.0 server
2007-10-26 20:06:36 +08:00
ret=0;
goto shut;
case SSL_ERROR_SSL:
ERR_print_errors(bio_err);
goto shut;
/* break; */
}
}
#if defined(OPENSSL_SYS_WINDOWS) || defined(OPENSSL_SYS_MSDOS)
#if defined(OPENSSL_SYS_WINCE) || defined(OPENSSL_SYS_MSDOS)
2002-11-16 06:37:18 +08:00
else if (_kbhit())
#else
else if ((_kbhit()) || (WAIT_OBJECT_0 == WaitForSingleObject(GetStdHandle(STD_INPUT_HANDLE), 0)))
2002-11-16 06:37:18 +08:00
#endif
#elif defined (OPENSSL_SYS_NETWARE)
else if (_kbhit())
#elif defined(OPENSSL_SYS_BEOS_R5)
else if (stdin_set)
#else
else if (FD_ISSET(fileno(stdin),&readfds))
#endif
{
if (crlf)
{
int j, lf_num;
i=raw_read_stdin(cbuf,BUFSIZZ/2);
lf_num = 0;
/* both loops are skipped when i <= 0 */
for (j = 0; j < i; j++)
if (cbuf[j] == '\n')
lf_num++;
for (j = i-1; j >= 0; j--)
{
cbuf[j+lf_num] = cbuf[j];
if (cbuf[j] == '\n')
{
lf_num--;
i++;
cbuf[j+lf_num] = '\r';
}
}
assert(lf_num == 0);
}
else
i=raw_read_stdin(cbuf,BUFSIZZ);
if ((!c_ign_eof) && ((i <= 0) || (cbuf[0] == 'Q')))
{
BIO_printf(bio_err,"DONE\n");
1. Changes for s_client.c to make it return non-zero exit code in case of handshake failure 2. Changes to x509_certificate_type function (crypto/x509/x509type.c) to make it recognize GOST certificates as EVP_PKT_SIGN|EVP_PKT_EXCH (required for s3_srvr to accept GOST client certificates). 3. Changes to EVP - adding of function EVP_PKEY_CTX_get0_peerkey - Make function EVP_PKEY_derive_set_peerkey work for context with ENCRYPT operation, because we use peerkey field in the context to pass non-ephemeral secret key to GOST encrypt operation. - added EVP_PKEY_CTRL_SET_IV control command. It is really GOST-specific, but it is used in SSL code, so it has to go in some header file, available during libssl compilation 4. Fix to HMAC to avoid call of OPENSSL_cleanse on undefined data 5. Include des.h if KSSL_DEBUG is defined into some libssl files, to make debugging output which depends on constants defined there, work and other KSSL_DEBUG output fixes 6. Declaration of real GOST ciphersuites, two authentication methods SSL_aGOST94 and SSL_aGOST2001 and one key exchange method SSL_kGOST 7. Implementation of these methods. 8. Support for sending unsolicited serverhello extension if GOST ciphersuite is selected. It is require for interoperability with CryptoPro CSP 3.0 and 3.6 and controlled by SSL_OP_CRYPTOPRO_TLSEXT_BUG constant. This constant is added to SSL_OP_ALL, because it does nothing, if non-GOST ciphersuite is selected, and all implementation of GOST include compatibility with CryptoPro. 9. Support for CertificateVerify message without length field. It is another CryptoPro bug, but support is made unconditional, because it does no harm for draft-conforming implementation. 10. In tls1_mac extra copy of stream mac context is no more done. When I've written currently commited code I haven't read EVP_DigestSignFinal manual carefully enough and haven't noticed that it does an internal digest ctx copying. This implementation was tested against 1. CryptoPro CSP 3.6 client and server 2. Cryptopro CSP 3.0 server
2007-10-26 20:06:36 +08:00
ret=0;
goto shut;
}
if ((!c_ign_eof) && (cbuf[0] == 'R'))
{
1999-04-10 20:08:46 +08:00
BIO_printf(bio_err,"RENEGOTIATING\n");
SSL_renegotiate(con);
1999-04-10 20:08:46 +08:00
cbuf_len=0;
}
else
{
cbuf_len=i;
cbuf_off=0;
#ifdef CHARSET_EBCDIC
ebcdic2ascii(cbuf, cbuf, i);
#endif
}
write_ssl=1;
1999-04-10 20:08:46 +08:00
read_tty=0;
}
}
1. Changes for s_client.c to make it return non-zero exit code in case of handshake failure 2. Changes to x509_certificate_type function (crypto/x509/x509type.c) to make it recognize GOST certificates as EVP_PKT_SIGN|EVP_PKT_EXCH (required for s3_srvr to accept GOST client certificates). 3. Changes to EVP - adding of function EVP_PKEY_CTX_get0_peerkey - Make function EVP_PKEY_derive_set_peerkey work for context with ENCRYPT operation, because we use peerkey field in the context to pass non-ephemeral secret key to GOST encrypt operation. - added EVP_PKEY_CTRL_SET_IV control command. It is really GOST-specific, but it is used in SSL code, so it has to go in some header file, available during libssl compilation 4. Fix to HMAC to avoid call of OPENSSL_cleanse on undefined data 5. Include des.h if KSSL_DEBUG is defined into some libssl files, to make debugging output which depends on constants defined there, work and other KSSL_DEBUG output fixes 6. Declaration of real GOST ciphersuites, two authentication methods SSL_aGOST94 and SSL_aGOST2001 and one key exchange method SSL_kGOST 7. Implementation of these methods. 8. Support for sending unsolicited serverhello extension if GOST ciphersuite is selected. It is require for interoperability with CryptoPro CSP 3.0 and 3.6 and controlled by SSL_OP_CRYPTOPRO_TLSEXT_BUG constant. This constant is added to SSL_OP_ALL, because it does nothing, if non-GOST ciphersuite is selected, and all implementation of GOST include compatibility with CryptoPro. 9. Support for CertificateVerify message without length field. It is another CryptoPro bug, but support is made unconditional, because it does no harm for draft-conforming implementation. 10. In tls1_mac extra copy of stream mac context is no more done. When I've written currently commited code I haven't read EVP_DigestSignFinal manual carefully enough and haven't noticed that it does an internal digest ctx copying. This implementation was tested against 1. CryptoPro CSP 3.6 client and server 2. Cryptopro CSP 3.0 server
2007-10-26 20:06:36 +08:00
ret=0;
shut:
if (in_init)
print_stuff(bio_c_out,con,full_log);
SSL_shutdown(con);
SHUTDOWN(SSL_get_fd(con));
end:
2006-03-18 22:24:02 +08:00
if (con != NULL)
{
if (prexit != 0)
print_stuff(bio_c_out,con,1);
SSL_free(con);
}
if (ctx != NULL) SSL_CTX_free(ctx);
if (cert)
X509_free(cert);
if (key)
EVP_PKEY_free(key);
if (pass)
OPENSSL_free(pass);
if (cbuf != NULL) { OPENSSL_cleanse(cbuf,BUFSIZZ); OPENSSL_free(cbuf); }
if (sbuf != NULL) { OPENSSL_cleanse(sbuf,BUFSIZZ); OPENSSL_free(sbuf); }
if (mbuf != NULL) { OPENSSL_cleanse(mbuf,BUFSIZZ); OPENSSL_free(mbuf); }
if (bio_c_out != NULL)
{
BIO_free(bio_c_out);
bio_c_out=NULL;
}
apps_shutdown();
OPENSSL_EXIT(ret);
}
1999-04-20 05:31:43 +08:00
static void print_stuff(BIO *bio, SSL *s, int full)
{
X509 *peer=NULL;
char *p;
2005-04-06 03:11:19 +08:00
static const char *space=" ";
char buf[BUFSIZ];
1999-04-13 01:23:57 +08:00
STACK_OF(X509) *sk;
STACK_OF(X509_NAME) *sk2;
SSL_CIPHER *c;
X509_NAME *xn;
int j,i;
2005-10-01 07:35:33 +08:00
#ifndef OPENSSL_NO_COMP
const COMP_METHOD *comp, *expansion;
2005-10-01 07:35:33 +08:00
#endif
if (full)
{
int got_a_chain = 0;
sk=SSL_get_peer_cert_chain(s);
if (sk != NULL)
{
got_a_chain = 1; /* we don't have it for SSL2 (yet) */
BIO_printf(bio,"---\nCertificate chain\n");
1999-04-13 01:23:57 +08:00
for (i=0; i<sk_X509_num(sk); i++)
{
1999-04-13 01:23:57 +08:00
X509_NAME_oneline(X509_get_subject_name(
sk_X509_value(sk,i)),buf,sizeof buf);
BIO_printf(bio,"%2d s:%s\n",i,buf);
1999-04-13 01:23:57 +08:00
X509_NAME_oneline(X509_get_issuer_name(
sk_X509_value(sk,i)),buf,sizeof buf);
BIO_printf(bio," i:%s\n",buf);
if (c_showcerts)
1999-04-13 01:23:57 +08:00
PEM_write_bio_X509(bio,sk_X509_value(sk,i));
}
}
BIO_printf(bio,"---\n");
peer=SSL_get_peer_certificate(s);
if (peer != NULL)
{
BIO_printf(bio,"Server certificate\n");
if (!(c_showcerts && got_a_chain)) /* Redundant if we showed the whole chain */
PEM_write_bio_X509(bio,peer);
X509_NAME_oneline(X509_get_subject_name(peer),
buf,sizeof buf);
BIO_printf(bio,"subject=%s\n",buf);
X509_NAME_oneline(X509_get_issuer_name(peer),
buf,sizeof buf);
BIO_printf(bio,"issuer=%s\n",buf);
}
else
BIO_printf(bio,"no peer certificate available\n");
1999-04-13 01:23:57 +08:00
sk2=SSL_get_client_CA_list(s);
if ((sk2 != NULL) && (sk_X509_NAME_num(sk2) > 0))
{
BIO_printf(bio,"---\nAcceptable client certificate CA names\n");
1999-04-13 01:23:57 +08:00
for (i=0; i<sk_X509_NAME_num(sk2); i++)
{
1999-04-13 01:23:57 +08:00
xn=sk_X509_NAME_value(sk2,i);
X509_NAME_oneline(xn,buf,sizeof(buf));
BIO_write(bio,buf,strlen(buf));
BIO_write(bio,"\n",1);
}
}
else
{
BIO_printf(bio,"---\nNo client certificate CA names sent\n");
}
p=SSL_get_shared_ciphers(s,buf,sizeof buf);
if (p != NULL)
{
/* This works only for SSL 2. In later protocol
* versions, the client does not know what other
* ciphers (in addition to the one to be used
* in the current connection) the server supports. */
BIO_printf(bio,"---\nCiphers common between both SSL endpoints:\n");
j=i=0;
while (*p)
{
if (*p == ':')
{
BIO_write(bio,space,15-j%25);
i++;
j=0;
BIO_write(bio,((i%3)?" ":"\n"),1);
}
else
{
BIO_write(bio,p,1);
j++;
}
p++;
}
BIO_write(bio,"\n",1);
}
BIO_printf(bio,"---\nSSL handshake has read %ld bytes and written %ld bytes\n",
BIO_number_read(SSL_get_rbio(s)),
BIO_number_written(SSL_get_wbio(s)));
}
BIO_printf(bio,((s->hit)?"---\nReused, ":"---\nNew, "));
c=SSL_get_current_cipher(s);
BIO_printf(bio,"%s, Cipher is %s\n",
SSL_CIPHER_get_version(c),
SSL_CIPHER_get_name(c));
if (peer != NULL) {
EVP_PKEY *pktmp;
pktmp = X509_get_pubkey(peer);
BIO_printf(bio,"Server public key is %d bit\n",
EVP_PKEY_bits(pktmp));
EVP_PKEY_free(pktmp);
}
2005-10-01 07:35:33 +08:00
#ifndef OPENSSL_NO_COMP
comp=SSL_get_current_compression(s);
expansion=SSL_get_current_expansion(s);
BIO_printf(bio,"Compression: %s\n",
comp ? SSL_COMP_get_name(comp) : "NONE");
BIO_printf(bio,"Expansion: %s\n",
expansion ? SSL_COMP_get_name(expansion) : "NONE");
2005-10-01 07:35:33 +08:00
#endif
SSL_SESSION_print(bio,SSL_get_session(s));
BIO_printf(bio,"---\n");
if (peer != NULL)
X509_free(peer);
/* flush, or debugging output gets mixed with http response */
2007-08-13 01:44:32 +08:00
(void)BIO_flush(bio);
}
static int ocsp_resp_cb(SSL *s, void *arg)
{
const unsigned char *p;
int len;
OCSP_RESPONSE *rsp;
len = SSL_get_tlsext_status_ocsp_resp(s, &p);
BIO_puts(arg, "OCSP response: ");
if (!p)
{
BIO_puts(arg, "no response sent\n");
return 1;
}
rsp = d2i_OCSP_RESPONSE(NULL, &p, len);
if (!rsp)
{
BIO_puts(arg, "response parse error\n");
BIO_dump_indent(arg, (char *)p, len, 4);
return 0;
}
BIO_puts(arg, "\n======================================\n");
OCSP_RESPONSE_print(arg, rsp, 0);
BIO_puts(arg, "======================================\n");
OCSP_RESPONSE_free(rsp);
return 1;
}