openssl/doc/man7/openssl-qlog.pod

=pod

=head1 NAME

openssl-qlog - OpenSSL qlog tracing functionality

=head1 DESCRIPTION

OpenSSL has unstable support for generating logs in the qlog logging format,
which can be used to obtain diagnostic data for QUIC connections. The data
generated includes information on packets sent and received and the frames
contained within them, as well as loss detection and other events.

The qlog output generated by OpenSSL can be used to obtain diagnostic
visualisations of a given QUIC connection using tools such as B<qvis>.

B<WARNING:> The output of OpenSSL's qlog functionality uses an unstable format
based on a draft specification. qlog output is not subject to any format
stability or compatibility guarantees at this time, and B<will> change in
incompatible ways in future versions of OpenSSL. See B<FORMAT STABILITY> below
for details.

=head1 USAGE

When OpenSSL is built with qlog support, qlog is enabled at run time by setting
the standard B<QLOGDIR> environment variable to point to a directory where qlog
files should be written. Once set, any QUIC connection established by OpenSSL
will have a qlog file written automatically to the specified directory.

Log files are generated in the I<.sqlog> format based on JSON-SEQ (RFC 7464).

The filenames of generated log files under the specified B<QLOGDIR> use the
following structure:

    {connection_odcid}_{vantage_point_type}.sqlog

where B<{connection_odcid}> is the lowercase hexadecimal encoding of a QUIC
connection's Original Destination Connection ID, which is the Destination
Connection ID used in the header of the first Initial packet sent as part of the
connection process, and B<{vantage_point_type}> is either C<client> or
C<server>, reflecting the perspective of the endpoint producing the qlog output.

The qlog functionality can be disabled at OpenSSL build time using the
I<no-unstable-qlog> configure flag.

=head1 SUPPORTED EVENT TYPES

The following event types are currently supported:

=over 4

=item B<connectivity:connection_started>

=item B<connectivity:connection_state_updated>

=item B<connectivity:connection_closed>

=item B<transport:parameters_set>

=item B<transport:packet_sent>

=item B<transport:packet_received>

=item B<recovery:packet_lost>

=back

=head1 FILTERS

By default, all supported event types are logged. The B<OSSL_QFILTER>
environment variable can be used to configure a filter specification which
determines which event types are to be logged. Each event type can be turned on
and off individually. The filter specification is a space-separated list of
terms listing event types to enable or disable. The terms are applied in order,
thus the effects of later terms override the effects of earlier terms.

=head2 Examples

Here are some example filter specifications:

=over 4

=item C<*> (or C<+*>)

Enable all supported qlog event types.

=item C<-*>

Disable all qlog event types.

=item C<* -transport:packet_received>

Enable all qlog event types, but disable the B<transport:packet_received> event
type.

=item C<-* transport:packet_sent>

Disable all qlog event types, except for the B<transport:packet_sent> event type.

=item C<-* connectivity:* transport:parameters_set>

Disable all qlog event types, except for B<transport:parameters_set> and all
supported event types in the B<connectivity> category.

=back

=head2 Filter Syntax Specification

Formally, the format of the filter specification in ABNF is as follows:

    filter              = *filter-term

    filter-term         = add-sub-term

    add-sub-term        = ["-" / "+"] specifier

    specifier           = global-specifier / qualified-specifier

    global-specifier    = wildcard

    qualified-specifier = component-specifier ":" component-specifier

    component-specifier = name / wildcard

    wildcard            = "*"

    name                = 1*(ALPHA / DIGIT / "_" / "-")

Filter terms are interpreted as follows:

=over 4

=item C<+*> (or C<*>)

Enables all event types.

=item C<-*>

Disables all event types.

=item C<+foo:*> (or C<foo:*>)

Enables all event types in the B<foo> category.

=item C<-foo:*>

Disables all event types in the B<foo> category.

=item C<+foo:bar> (or C<foo:bar>)

Enables a specific event type B<foo:bar>.

=item C<-foo:bar>

Disables a specific event type B<foo:bar>.

=back

Partial wildcard matches are not supported at this time.

=head2 Default Configuration

If the B<OSSL_QFILTER> environment variable is not set or set to the empty
string, this is equivalent to enabling all event types (i.e., it is equivalent
to a filter of C<*>). Note that the B<QLOGDIR> environment variable must also be
set to enable qlog.

=head1 FORMAT STABILITY

The OpenSSL qlog functionality currently implements a draft version of the qlog
specification. Future revisions to the qlog specification in advance of formal
standardisation are expected to introduce incompatible and breaking changes to
the qlog format. The OpenSSL qlog functionality will transition to producing
output in this format in the future once standardisation is complete.

Because of this, the qlog output of OpenSSL B<will> change in incompatible and
breaking ways in the future, including in non-major releases of OpenSSL. The
qlog output of OpenSSL is considered unstable and not subject to any format
stability or compatibility guarantees at this time.

Users of the OpenSSL qlog functionality must be aware that the output may change
arbitrarily between releases and that the preservation of compatibility with any
given tool between releases is not guaranteed.

=head2 Aims

The OpenSSL draft qlog functionality is primarily intended for use in
conjunction with the qvis tool L<https://qvis.quictools.info/>. In terms of
format compatibility, the output format of the OpenSSL qlog functionality is
expected to track what is supported by qvis. As such, future changes to the
output of the OpenSSL qlog functionality are expected to track changes in qvis
as they occur, and reflect the versions of qlog currently supported by qvis.

This means that prior to the finalisation of the qlog standard, in the event of
a disparity between the current draft and what qvis supports, the OpenSSL qlog
functionality will generally aim for qvis compatibility over compliance with the
latest draft.

As such, OpenSSL's qlog functionality currently implements qlog version 0.3 as
defined in B<draft-ietf-quic-qlog-main-schema-05> and
B<draft-ietf-quic-qlog-quic-events-04>. These revisions are intentionally used
instead of more recent revisions due to their qvis compatibility.

=head1 LIMITATIONS

The OpenSSL implementation of qlog currently has the following limitations:

=over 4

=item

Not all event types defined by the draft specification are implemented.

=item

Only the JSON-SEQ (B<.sqlog>) output format is supported.

=item

Only the B<QLOGDIR> environment variable is supported for configuring the qlog
output directory. The standard B<QLOGFILE> environment variable is not
supported.

=item

There is no API for programmatically enabling or controlling the qlog
functionality.

=back

=head1 SEE ALSO

L<openssl-quic(7)>, L<openssl-env(7)>

=head1 HISTORY

This functionality was added in OpenSSL 3.3.

=head1 COPYRIGHT

Copyright 2024 The OpenSSL Project Authors. All Rights Reserved.

Licensed under the Apache License 2.0 (the "License").  You may not use
this file except in compliance with the License.  You can obtain a copy
in the file LICENSE in the source distribution or at
L<https://www.openssl.org/source/license.html>.

=cut