mirror/openldap
2
0
Fork 0
mirror of https://git.openldap.org/openldap/openldap.git synced 2024-12-21 03:10:25 +08:00
Code Issues Packages Projects Releases Wiki Activity
f7070f80ac
openldap/doc/guide/admin/replication.sdf
Howard Chu f7070f80ac minor cleanup
2008-04-11 12:05:32 +00:00

836 lines
34 KiB
Plaintext
Raw Blame History

# $OpenLDAP$
# Copyright 1999-2008 The OpenLDAP Foundation, All Rights Reserved.
# COPYING RESTRICTIONS APPLY, see COPYRIGHT.
H1: Replication
Replicated directories are a fundamental requirement for delivering a
resilient enterprise deployment.
{{PRD:OpenLDAP}} has various configuration options for creating a replicated
directory. The following sections will discuss these.
H2: Replication Strategies
H3: Push Based
H5: Replacing Slurpd
{{Slurpd}} replication has been deprecated in favor of Syncrepl replication and
has been completely removed from OpenLDAP 2.4.
{{Why was it replaced?}}
The {{slurpd}} daemon was the original replication mechanism inherited from
UMich's LDAP and operates in push mode: the master pushes changes to the
slaves. It has been replaced for many reasons, in brief:
* It is not reliable
* It is extremely sensitive to the ordering of records in the replog
* It can easily go out of sync, at which point manual intervention is
required to resync the slave database with the master directory
* It isn't very tolerant of unavailable servers. If a slave goes down
for a long time, the replog may grow to a size that's too large for
slurpd to process
{{What was it replaced with?}}
Syncrepl
{{Why is Syncrepl better?}}
* Syncrepl is self-synchronizing; you can start with a database in any
state from totally empty to fully synced and it will automatically do
the right thing to achieve and maintain synchronization
* Syncrepl can operate in either direction
* Data updates can be minimal or maximal
{{How do I implement a pushed based replication system using Syncrepl?}}
The easiest way is to point an LDAP backend ({{SECT: Backends}} and {{slapd-ldap(8)}})
to your slave directory and setup Syncrepl to point to your Master database.
REFERENCE test045/048 for better explanation of above.
If you imagine Syncrepl pulling down changes from the Master server, and then
pushing those changes out to your slave servers via {{slapd-ldap(8)}}. This is
called proxy mode (elaborate/confirm?).
DIAGRAM HERE
BETTER EXAMPLE here from test045/048 for different push/multiproxy examples.
Here's an example:
> include ./schema/core.schema
> include ./schema/cosine.schema
> include ./schema/inetorgperson.schema
> include ./schema/openldap.schema
> include ./schema/nis.schema
>
> pidfile /home/ghenry/openldap/ldap/tests/testrun/slapd.3.pid
> argsfile /home/ghenry/openldap/ldap/tests/testrun/slapd.3.args
>
> modulepath ../servers/slapd/back-bdb/
> moduleload back_bdb.la
> modulepath ../servers/slapd/back-monitor/
> moduleload back_monitor.la
> modulepath ../servers/slapd/overlays/
> moduleload syncprov.la
> modulepath ../servers/slapd/back-ldap/
> moduleload back_ldap.la
>
> # We don't need any access to this DSA
> restrict all
>
> #######################################################################
> # consumer proxy database definitions
> #######################################################################
>
> database ldap
> suffix "dc=example,dc=com"
> rootdn "cn=Whoever"
> uri ldap://localhost:9012/
>
> lastmod on
>
> # HACK: use the RootDN of the monitor database as UpdateDN so ACLs apply
> # without the need to write the UpdateDN before starting replication
> acl-bind bindmethod=simple
> binddn="cn=Monitor"
> credentials=monitor
>
> # HACK: use the RootDN of the monitor database as UpdateDN so ACLs apply
> # without the need to write the UpdateDN before starting replication
> syncrepl rid=1
> provider=ldap://localhost:9011/
> binddn="cn=Manager,dc=example,dc=com"
> bindmethod=simple
> credentials=secret
> searchbase="dc=example,dc=com"
> filter="(objectClass=*)"
> attrs="*,structuralObjectClass,entryUUID,entryCSN,creatorsName,createTimestamp,modifiersName,modifyTimestamp"
> schemachecking=off
> scope=sub
> type=refreshAndPersist
> retry="5 5 300 5"
>
> overlay syncprov
>
> database monitor
DETAILED EXPLANATION OF ABOVE LIKE IN OTHER SECTIONS (line numbers?)
ANOTHER DIAGRAM HERE
As you can see, you can let your imagination go wild using Syncrepl and
{{slapd-ldap(8)}} tailoring your replication to fit your specific network
topology.
H3: Pull Based
H4: syncrepl replication
H4: delta-syncrepl replication
H2: Replication Types
H3: syncrepl replication
H3: delta-syncrepl replication
H3: N-Way Multi-Master replication
Multi-Master replication is a replication technique using Syncrepl to replicate
data to multiple Master Directory servers.
* Advantages of Multi-Master replication:
- If any master fails, other masters will continue to accept updates
- Avoids a single point of failure
- Masters can be located in several physical sites i.e. distributed across the
network/globe.
- Good for Automatic failover/High Availability
* Disadvantages of Multi-Master replication:
- It has {{B:NOTHING}} to do with load balancing
- {{URL:http://www.openldap.org/faq/data/cache/1240.html}}
- If connectivity with a master is lost because of a network partition, then
"automatic failover" can just compound the problem
- Typically, a particular machine cannot distinguish between losing contact
with a peer because that peer crashed, or because the network link has failed
- If a network is partitioned and multiple clients start writing to each of the
"masters" then reconciliation will be a pain; it may be best to simply deny
writes to the clients that are partitioned from the single master
- Masters {{B:must}} propagate writes to {{B:all}} the other servers, which
means the network traffic and write load is constant and spreads across all
of the servers
This is discussed in full in the {{SECT:N-Way Multi-Master}} section below
H3: MirrorMode replication
MirrorMode is a hybrid configuration that provides all of the consistency
guarantees of single-master replication, while also providing the high
availability of multi-master. In MirrorMode two masters are set up to
replicate from each other (as a multi-master configuration) but an
external frontend is employed to direct all writes to only one of
the two servers. The second master will only be used for writes if
the first master crashes, at which point the frontend will switch to
directing all writes to the second master. When a crashed master is
repaired and restarted it will automatically catch up to any changes
on the running master and resync.
This is discussed in full in the {{SECT:MirrorMode}} section below
H2: LDAP Sync Replication
The {{TERM:LDAP Sync}} Replication engine, {{TERM:syncrepl}} for
short, is a consumer-side replication engine that enables the
consumer {{TERM:LDAP}} server to maintain a shadow copy of a
{{TERM:DIT}} fragment. A syncrepl engine resides at the consumer-side
as one of the {{slapd}}(8) threads. It creates and maintains a
consumer replica by connecting to the replication provider to perform
the initial DIT content load followed either by periodic content
polling or by timely updates upon content changes.
Syncrepl uses the LDAP Content Synchronization (or LDAP Sync for
short) protocol as the replica synchronization protocol. It provides
a stateful replication which supports both pull-based and push-based
synchronization and does not mandate the use of a history store.
Syncrepl keeps track of the status of the replication content by
maintaining and exchanging synchronization cookies. Because the
syncrepl consumer and provider maintain their content status, the
consumer can poll the provider content to perform incremental
synchronization by asking for the entries required to make the
consumer replica up-to-date with the provider content. Syncrepl
also enables convenient management of replicas by maintaining replica
status. The consumer replica can be constructed from a consumer-side
or a provider-side backup at any synchronization status. Syncrepl
can automatically resynchronize the consumer replica up-to-date
with the current provider content.
Syncrepl supports both pull-based and push-based synchronization.
In its basic refreshOnly synchronization mode, the provider uses
pull-based synchronization where the consumer servers need not be
tracked and no history information is maintained. The information
required for the provider to process periodic polling requests is
contained in the synchronization cookie of the request itself. To
optimize the pull-based synchronization, syncrepl utilizes the
present phase of the LDAP Sync protocol as well as its delete phase,
instead of falling back on frequent full reloads. To further optimize
the pull-based synchronization, the provider can maintain a per-scope
session log as a history store. In its refreshAndPersist mode of
synchronization, the provider uses a push-based synchronization.
The provider keeps track of the consumer servers that have requested
a persistent search and sends them necessary updates as the provider
replication content gets modified.
With syncrepl, a consumer server can create a replica without
changing the provider's configurations and without restarting the
provider server, if the consumer server has appropriate access
privileges for the DIT fragment to be replicated. The consumer
server can stop the replication also without the need for provider-side
changes and restart.
Syncrepl supports both partial and sparse replications. The shadow
DIT fragment is defined by a general search criteria consisting of
base, scope, filter, and attribute list. The replica content is
also subject to the access privileges of the bind identity of the
syncrepl replication connection.
H3: The LDAP Content Synchronization Protocol
The LDAP Sync protocol allows a client to maintain a synchronized
copy of a DIT fragment. The LDAP Sync operation is defined as a set
of controls and other protocol elements which extend the LDAP search
operation. This section introduces the LDAP Content Sync protocol
only briefly. For more information, refer to {{REF:RFC4533}}.
The LDAP Sync protocol supports both polling and listening for
changes by defining two respective synchronization operations:
{{refreshOnly}} and {{refreshAndPersist}}. Polling is implemented
by the {{refreshOnly}} operation. The client copy is synchronized
to the server copy at the time of polling. The server finishes the
search operation by returning {{SearchResultDone}} at the end of
the search operation as in the normal search. The listening is
implemented by the {{refreshAndPersist}} operation. Instead of
finishing the search after returning all entries currently matching
the search criteria, the synchronization search remains persistent
in the server. Subsequent updates to the synchronization content
in the server cause additional entry updates to be sent to the
client.
The {{refreshOnly}} operation and the refresh stage of the
{{refreshAndPersist}} operation can be performed with a present
phase or a delete phase.
In the present phase, the server sends the client the entries updated
within the search scope since the last synchronization. The server
sends all requested attributes, be it changed or not, of the updated
entries. For each unchanged entry which remains in the scope, the
server sends a present message consisting only of the name of the
entry and the synchronization control representing state present.
The present message does not contain any attributes of the entry.
After the client receives all update and present entries, it can
reliably determine the new client copy by adding the entries added
to the server, by replacing the entries modified at the server, and
by deleting entries in the client copy which have not been updated
nor specified as being present at the server.
The transmission of the updated entries in the delete phase is the
same as in the present phase. The server sends all the requested
attributes of the entries updated within the search scope since the
last synchronization to the client. In the delete phase, however,
the server sends a delete message for each entry deleted from the
search scope, instead of sending present messages. The delete
message consists only of the name of the entry and the synchronization
control representing state delete. The new client copy can be
determined by adding, modifying, and removing entries according to
the synchronization control attached to the {{SearchResultEntry}}
message.
In the case that the LDAP Sync server maintains a history store and
can determine which entries are scoped out of the client copy since
the last synchronization time, the server can use the delete phase.
If the server does not maintain any history store, cannot determine
the scoped-out entries from the history store, or the history store
does not cover the outdated synchronization state of the client,
the server should use the present phase. The use of the present
phase is much more efficient than a full content reload in terms
of the synchronization traffic. To reduce the synchronization
traffic further, the LDAP Sync protocol also provides several
optimizations such as the transmission of the normalized {{EX:entryUUID}}s
and the transmission of multiple {{EX:entryUUIDs}} in a single
{{syncIdSet}} message.
At the end of the {{refreshOnly}} synchronization, the server sends
a synchronization cookie to the client as a state indicator of the
client copy after the synchronization is completed. The client
will present the received cookie when it requests the next incremental
synchronization to the server.
When {{refreshAndPersist}} synchronization is used, the server sends
a synchronization cookie at the end of the refresh stage by sending
a Sync Info message with TRUE refreshDone. It also sends a
synchronization cookie by attaching it to {{SearchResultEntry}}
generated in the persist stage of the synchronization search. During
the persist stage, the server can also send a Sync Info message
containing the synchronization cookie at any time the server wants
to update the client-side state indicator. The server also updates
a synchronization indicator of the client at the end of the persist
stage.
In the LDAP Sync protocol, entries are uniquely identified by the
{{EX:entryUUID}} attribute value. It can function as a reliable
identifier of the entry. The DN of the entry, on the other hand,
can be changed over time and hence cannot be considered as the
reliable identifier. The {{EX:entryUUID}} is attached to each
{{SearchResultEntry}} or {{SearchResultReference}} as a part of the
synchronization control.
H3: Syncrepl Details
The syncrepl engine utilizes both the {{refreshOnly}} and the
{{refreshAndPersist}} operations of the LDAP Sync protocol. If a
syncrepl specification is included in a database definition,
{{slapd}}(8) launches a syncrepl engine as a {{slapd}}(8) thread
and schedules its execution. If the {{refreshOnly}} operation is
specified, the syncrepl engine will be rescheduled at the interval
time after a synchronization operation is completed. If the
{{refreshAndPersist}} operation is specified, the engine will remain
active and process the persistent synchronization messages from the
provider.
The syncrepl engine utilizes both the present phase and the delete
phase of the refresh synchronization. It is possible to configure
a per-scope session log in the provider server which stores the
{{EX:entryUUID}}s of a finite number of entries deleted from a
replication content. Multiple replicas of single provider content
share the same per-scope session log. The syncrepl engine uses the
delete phase if the session log is present and the state of the
consumer server is recent enough that no session log entries are
truncated after the last synchronization of the client. The syncrepl
engine uses the present phase if no session log is configured for
the replication content or if the consumer replica is too outdated
to be covered by the session log. The current design of the session
log store is memory based, so the information contained in the
session log is not persistent over multiple provider invocations.
It is not currently supported to access the session log store by
using LDAP operations. It is also not currently supported to impose
access control to the session log.
As a further optimization, even in the case the synchronization
search is not associated with any session log, no entries will be
transmitted to the consumer server when there has been no update
in the replication context.
The syncrepl engine, which is a consumer-side replication engine,
can work with any backends. The LDAP Sync provider can be configured
as an overlay on any backend, but works best with the {{back-bdb}}
or {{back-hdb}} backend.
The LDAP Sync provider maintains a {{EX:contextCSN}} for each
database as the current synchronization state indicator of the
provider content. It is the largest {{EX:entryCSN}} in the provider
context such that no transactions for an entry having smaller
{{EX:entryCSN}} value remains outstanding. The {{EX:contextCSN}}
could not just be set to the largest issued {{EX:entryCSN}} because
{{EX:entryCSN}} is obtained before a transaction starts and
transactions are not committed in the issue order.
The provider stores the {{EX:contextCSN}} of a context in the
{{EX:contextCSN}} attribute of the context suffix entry. The attribute
is not written to the database after every update operation though;
instead it is maintained primarily in memory. At database start
time the provider reads the last saved {{EX:contextCSN}} into memory
and uses the in-memory copy exclusively thereafter. By default,
changes to the {{EX:contextCSN}} as a result of database updates
will not be written to the database until the server is cleanly
shut down. A checkpoint facility exists to cause the contextCSN to
be written out more frequently if desired.
Note that at startup time, if the provider is unable to read a
{{EX:contextCSN}} from the suffix entry, it will scan the entire
database to determine the value, and this scan may take quite a
long time on a large database. When a {{EX:contextCSN}} value is
read, the database will still be scanned for any {{EX:entryCSN}}
values greater than it, to make sure the {{EX:contextCSN}} value
truly reflects the greatest committed {{EX:entryCSN}} in the database.
On databases which support inequality indexing, setting an eq index
on the {{EX:entryCSN}} attribute and configuring {{contextCSN}}
checkpoints will greatly speed up this scanning step.
If no {{EX:contextCSN}} can be determined by reading and scanning
the database, a new value will be generated. Also, if scanning the
database yielded a greater {{EX:entryCSN}} than was previously
recorded in the suffix entry's {{EX:contextCSN}} attribute, a
checkpoint will be immediately written with the new value.
The consumer also stores its replica state, which is the provider's
{{EX:contextCSN}} received as a synchronization cookie, in the
{{EX:contextCSN}} attribute of the suffix entry. The replica state
maintained by a consumer server is used as the synchronization state
indicator when it performs subsequent incremental synchronization
with the provider server. It is also used as a provider-side
synchronization state indicator when it functions as a secondary
provider server in a cascading replication configuration. Since
the consumer and provider state information are maintained in the
same location within their respective databases, any consumer can
be promoted to a provider (and vice versa) without any special
actions.
Because a general search filter can be used in the syncrepl
specification, some entries in the context may be omitted from the
synchronization content. The syncrepl engine creates a glue entry
to fill in the holes in the replica context if any part of the
replica content is subordinate to the holes. The glue entries will
not be returned in the search result unless {{ManageDsaIT}} control
is provided.
Also as a consequence of the search filter used in the syncrepl
specification, it is possible for a modification to remove an entry
from the replication scope even though the entry has not been deleted
on the provider. Logically the entry must be deleted on the consumer
but in {{refreshOnly}} mode the provider cannot detect and propagate
this change without the use of the session log.
H3: Configuring Syncrepl
Because syncrepl is a consumer-side replication engine, the syncrepl
specification is defined in {{slapd.conf}}(5) of the consumer
server, not in the provider server's configuration file. The initial
loading of the replica content can be performed either by starting
the syncrepl engine with no synchronization cookie or by populating
the consumer replica by adding an {{TERM:LDIF}} file dumped as a
backup at the provider.
When loading from a backup, it is not required to perform the initial
loading from the up-to-date backup of the provider content. The
syncrepl engine will automatically synchronize the initial consumer
replica to the current provider content. As a result, it is not
required to stop the provider server in order to avoid the replica
inconsistency caused by the updates to the provider content during
the content backup and loading process.
When replicating a large scale directory, especially in a bandwidth
constrained environment, it is advised to load the consumer replica
from a backup instead of performing a full initial load using
syncrepl.
H4: Set up the provider slapd
The provider is implemented as an overlay, so the overlay itself
must first be configured in {{slapd.conf}}(5) before it can be
used. The provider has only two configuration directives, for setting
checkpoints on the {{EX:contextCSN}} and for configuring the session
log. Because the LDAP Sync search is subject to access control,
proper access control privileges should be set up for the replicated
content.
The {{EX:contextCSN}} checkpoint is configured by the
> syncprov-checkpoint <ops> <minutes>
directive. Checkpoints are only tested after successful write
operations. If {{<ops>}} operations or more than {{<minutes>}}
time has passed since the last checkpoint, a new checkpoint is
performed.
The session log is configured by the
> syncprov-sessionlog <size>
directive, where {{<size>}} is the maximum number of session log
entries the session log can record. When a session log is configured,
it is automatically used for all LDAP Sync searches within the
database.
Note that using the session log requires searching on the {{entryUUID}}
attribute. Setting an eq index on this attribute will greatly benefit
the performance of the session log on the provider.
A more complete example of the {{slapd.conf}}(5) content is thus:
> database bdb
> suffix dc=Example,dc=com
> rootdn dc=Example,dc=com
> directory /var/ldap/db
> index objectclass,entryCSN,entryUUID eq
>
> overlay syncprov
> syncprov-checkpoint 100 10
> syncprov-sessionlog 100
H4: Set up the consumer slapd
The syncrepl replication is specified in the database section of
{{slapd.conf}}(5) for the replica context. The syncrepl engine
is backend independent and the directive can be defined with any
database type.
> database hdb
> suffix dc=Example,dc=com
> rootdn dc=Example,dc=com
> directory /var/ldap/db
> index objectclass,entryCSN,entryUUID eq
>
> syncrepl rid=123
> provider=ldap://provider.example.com:389
> type=refreshOnly
> interval=01:00:00:00
> searchbase="dc=example,dc=com"
> filter="(objectClass=organizationalPerson)"
> scope=sub
> attrs="cn,sn,ou,telephoneNumber,title,l"
> schemachecking=off
> bindmethod=simple
> binddn="cn=syncuser,dc=example,dc=com"
> credentials=secret
In this example, the consumer will connect to the provider {{slapd}}(8)
at port 389 of {{FILE:ldap://provider.example.com}} to perform a
polling ({{refreshOnly}}) mode of synchronization once a day. It
will bind as {{EX:cn=syncuser,dc=example,dc=com}} using simple
authentication with password "secret". Note that the access control
privilege of {{EX:cn=syncuser,dc=example,dc=com}} should be set
appropriately in the provider to retrieve the desired replication
content. Also the search limits must be high enough on the provider
to allow the syncuser to retrieve a complete copy of the requested
content. The consumer uses the rootdn to write to its database so
it always has full permissions to write all content.
The synchronization search in the above example will search for the
entries whose objectClass is organizationalPerson in the entire
subtree rooted at {{EX:dc=example,dc=com}}. The requested attributes
are {{EX:cn}}, {{EX:sn}}, {{EX:ou}}, {{EX:telephoneNumber}},
{{EX:title}}, and {{EX:l}}. The schema checking is turned off, so
that the consumer {{slapd}}(8) will not enforce entry schema
checking when it process updates from the provider {{slapd}}(8).
For more detailed information on the syncrepl directive, see the
{{SECT:syncrepl}} section of {{SECT:The slapd Configuration File}}
chapter of this admin guide.
H4: Start the provider and the consumer slapd
The provider {{slapd}}(8) is not required to be restarted.
{{contextCSN}} is automatically generated as needed: it might be
originally contained in the {{TERM:LDIF}} file, generated by
{{slapadd}} (8), generated upon changes in the context, or generated
when the first LDAP Sync search arrives at the provider. If an
LDIF file is being loaded which did not previously contain the
{{contextCSN}}, the {{-w}} option should be used with {{slapadd}}
(8) to cause it to be generated. This will allow the server to
startup a little quicker the first time it runs.
When starting a consumer {{slapd}}(8), it is possible to provide
a synchronization cookie as the {{-c cookie}} command line option
in order to start the synchronization from a specific state. The
cookie is a comma separated list of name=value pairs. Currently
supported syncrepl cookie fields are {{csn=<csn>}} and {{rid=<rid>}}.
{{<csn>}} represents the current synchronization state of the
consumer replica. {{<rid>}} identifies a consumer replica locally
within the consumer server. It is used to relate the cookie to the
syncrepl definition in {{slapd.conf}}(5) which has the matching
replica identifier. The {{<rid>}} must have no more than 3 decimal
digits. The command line cookie overrides the synchronization
cookie stored in the consumer replica database.
H2: N-Way Multi-Master
For the following example we will be using 3 Master nodes. Keeping in line with
{{B:test050-syncrepl-multimaster}} of the OpenLDAP test suite, we will be configuring
{{slapd(8)}} via {{B:cn=config}}
This sets up the config database:
> dn: cn=config
> objectClass: olcGlobal
> cn: config
> olcServerID: 1
>
> dn: olcDatabase={0}config,cn=config
> objectClass: olcDatabaseConfig
> olcDatabase: {0}config
> olcRootPW: secret
second and third servers will have a different olcServerID obviously:
> dn: cn=config
> objectClass: olcGlobal
> cn: config
> olcServerID: 2
>
> dn: olcDatabase={0}config,cn=config
> objectClass: olcDatabaseConfig
> olcDatabase: {0}config
> olcRootPW: secret
This sets up syncrepl as a provider (since these are all masters):
> dn: cn=module,cn=config
> objectClass: olcModuleList
> cn: module
> olcModulePath: /usr/local/libexec/openldap
> olcModuleLoad: syncprov.la
Now we setup the first Master Node (replace $URI1, $URI2 and $URI3 etc. with your actual ldap urls):
> dn: cn=config
> changetype: modify
> replace: olcServerID
> olcServerID: 1 $URI1
> olcServerID: 2 $URI2
> olcServerID: 3 $URI3
>
> dn: olcOverlay=syncprov,olcDatabase={0}config,cn=config
> changetype: add
> objectClass: olcOverlayConfig
> objectClass: olcSyncProvConfig
> olcOverlay: syncprov
>
> dn: olcDatabase={0}config,cn=config
> changetype: modify
> add: olcSyncRepl
> olcSyncRepl: rid=001 provider=$URI1 binddn="cn=config" bindmethod=simple
> credentials=secret searchbase="cn=config" type=refreshAndPersist
> retry="5 5 300 5" timeout=1
> olcSyncRepl: rid=002 provider=$URI2 binddn="cn=config" bindmethod=simple
> credentials=secret searchbase="cn=config" type=refreshAndPersist
> retry="5 5 300 5" timeout=1
> olcSyncRepl: rid=003 provider=$URI3 binddn="cn=config" bindmethod=simple
> credentials=secret searchbase="cn=config" type=refreshAndPersist
> retry="5 5 300 5" timeout=1
> -
> add: olcMirrorMode
> olcMirrorMode: TRUE
Now start up the Master and a consumer/s, also add the above LDIF to the first consumer, second consumer etc. It will then replicate {{B:cn=config}}. You now have N-Way Multimaster on the config database.
We still have to replicate the actual data, not just the config, so add to the master (all active and configured consumers/masters will pull down this config, as they are all syncing). Also, replace all {{${}}} variables with whatever is applicable to your setup:
> dn: olcDatabase={1}$BACKEND,cn=config
> objectClass: olcDatabaseConfig
> objectClass: olc${BACKEND}Config
> olcDatabase: {1}$BACKEND
> olcSuffix: $BASEDN
> olcDbDirectory: ./db
> olcRootDN: $MANAGERDN
> olcRootPW: $PASSWD
> olcSyncRepl: rid=004 provider=$URI1 binddn="$MANAGERDN" bindmethod=simple
> credentials=$PASSWD searchbase="$BASEDN" type=refreshOnly
> interval=00:00:00:10 retry="5 5 300 5" timeout=1
> olcSyncRepl: rid=005 provider=$URI2 binddn="$MANAGERDN" bindmethod=simple
> credentials=$PASSWD searchbase="$BASEDN" type=refreshOnly
> interval=00:00:00:10 retry="5 5 300 5" timeout=1
> olcSyncRepl: rid=006 provider=$URI3 binddn="$MANAGERDN" bindmethod=simple
> credentials=$PASSWD searchbase="$BASEDN" type=refreshOnly
> interval=00:00:00:10 retry="5 5 300 5" timeout=1
> olcMirrorMode: TRUE
>
> dn: olcOverlay=syncprov,olcDatabase={1}${BACKEND},cn=config
> changetype: add
> objectClass: olcOverlayConfig
> objectClass: olcSyncProvConfig
> olcOverlay: syncprov
Note: You must have all your server set to the same time via {{http://www.ntp.org/}}
H2: MirrorMode
H3: Arguments for MirrorMode
* Provides a high-availability (HA) solution for directory writes (replicas handle reads)
* As long as one Master is operational, writes can safely be accepted
* Master nodes replicate from each other, so they are always up to date and
can be ready to take over (hot standby)
* Syncrepl also allows the master nodes to re-synchronize after any downtime
* Delta-Syncrepl can be used
H3: Arguments against MirrorMode
* MirrorMode is not what is termed as a Multi-Master solution. This is because
writes have to go to one of the mirror nodes at a time
* MirrorMode can be termed as Active-Active Hot-Standby, therefor an external
server (slapd in proxy mode) or device (hardware load balancer) to manage which
master is currently active
* While syncrepl can recover from a completely empty database, slapadd is much
faster
* Does not provide faster or more scalable write performance (neither could
any Multi-Master solution)
* Backups are managed slightly differently
- If backing up the Berkeley database itself and periodically backing up the
transaction log files, then the same member of the mirror pair needs to be
used to collect logfiles until the next database backup is taken
- To ensure that both databases are consistent, each database might have to be
put in read-only mode while performing a slapcat.
- When using slapcat, the generated LDIF files can be rather large. This can
happen with a non-MirrorMode deployment also.
H3: MirrorMode Configuration
MirrorMode configuration is actually very easy. If you have ever setup a normal
slapd syncrepl provider, then the only change is the following two directives:
> mirrormode on
> serverID 1
Note: You need to make sure that the {{serverID}} of each mirror node pair is
different and add it as a global configuration option.
H4: Mirror Node Configuration
This is the same as the {{SECT:Set up the provider slapd}} section.
Note: Delta-syncrepl is not yet supported with MirrorMode.
Here's a specific cut down example using {{SECT:LDAP Sync Replication}} in
{{refreshAndPersist}} mode:
MirrorMode node 1:
> # Global section
> serverID 1
> # database section
>
> # syncrepl directives
> syncrepl rid=001
> provider=ldap://ldap-ridr1.example.com
> bindmethod=simple
> binddn="cn=mirrormode,dc=example,dc=com"
> credentials=mirrormode
> searchbase="dc=example,dc=com"
> schemachecking=on
> type=refreshAndPersist
> retry="60 +"
>
> syncrepl rid=002
> provider=ldap://ldap-rid2.example.com
> bindmethod=simple
> binddn="cn=mirrormode,dc=example,dc=com"
> credentials=mirrormode
> searchbase="dc=example,dc=com"
> schemachecking=on
> type=refreshAndPersist
> retry="60 +"
>
> mirrormode on
MirrorMode node 2:
> # Global section
> serverID 2
> # database section
>
> # syncrepl directives
> syncrepl rid=001
> provider=ldap://ldap-ridr1.example.com
> bindmethod=simple
> binddn="cn=mirrormode,dc=example,dc=com"
> credentials=mirrormode
> searchbase="dc=example,dc=com"
> schemachecking=on
> type=refreshAndPersist
> retry="60 +"
>
> syncrepl rid=002
> provider=ldap://ldap-rid2.example.com
> bindmethod=simple
> binddn="cn=mirrormode,dc=example,dc=com"
> credentials=mirrormode
> searchbase="dc=example,dc=com"
> schemachecking=on
> type=refreshAndPersist
> retry="60 +"
>
> mirrormode on
It's simple really; each MirrorMode node is setup {{B:exactly}} the same, except
that the {{serverID}} is unique.
H4: Failover Configuration
There are generally 2 choices for this; 1. Hardware proxies/load-balancing or
dedicated proxy software, 2. using a Back-LDAP proxy as a syncrepl provider
A typical enterprise example might be:
!import "dual_dc.png"; align="center"; title="MirrorMode Enterprise Configuration"
FT[align="Center"] Figure X.Y: MirrorMode in a Dual Data Center Configuration
H4: Normal Consumer Configuration
This is exactly the same as the {{SECT:Set up the consumer slapd}} section. It
can either setup in normal {{SECT:syncrepl replication}} mode, or in
{{SECT:delta-syncrepl replication}} mode.
H3: MirrorMode Summary
Hopefully you will now have a directory architecture that provides all of the
consistency guarantees of single-master replication, whilst also providing the
high availability of multi-master replication.
Reference in New Issue View Git Blame Copy Permalink