openldap/servers/slapd/tools/Makefile.in
Kurt Zeilenga 8f02beada9 PROTOTYPE: New connection management infrastructure designed to
remove race conditions on connection close.
BROKEN: various counters for dn=monitor.
Initial testing on FreeBSD (with and without pthreads) was successfull.
Have not yet tested preemptive threading environments.
Have not built against backends other than LDBM.
1999-03-22 07:14:54 +00:00

205 lines
6.7 KiB
Makefile

#-----------------------------------------------------------------------------
# Copyright (c) 1995 Regents of the University of Michigan.
# All rights reserved.
#
# Redistribution and use in source and binary forms are permitted
# provided that this notice is preserved and that due credit is given
# to the University of Michigan at Ann Arbor. The name of the University
# may not be used to endorse or promote products derived from this
# software without specific prior written permission. This software
# is provided ``as is'' without express or implied warranty.
#
# Stand alone LDAP server tools makefile
#
#-----------------------------------------------------------------------------
HAVE_ISODE = @HAVE_ISODE@
BUILD_LDBM = @BUILD_LDBM@
BUILD_BDB2 = @BUILD_BDB2@
LDAP_INCDIR= ../../../include
LDAP_LIBDIR= ../../../libraries
XLIBS = -lavl -lldif -lldbm -lldap_r -llber -llutil
XXLIBS = $(LDAPD_LIBS) $(SLAPD_LIBS) \
$(PERL_LDFLAGS) $(LDBM_LIBS) $(KRB_LIBS) $(LUTIL_LIBS)
XXXLIBS = $(LTHREAD_LIBS)
PROGRAMS=ldif2index ldif2ldbm ldbmcat ldif2id2entry ldif2id2children \
centipede ldbmtest ldif
PROGRAMS2=ldif2index-bdb2 ldif2ldbm-bdb2 \
ldif2id2entry-bdb2 ldif2id2children-bdb2
SRCS = centipede.c ldbmcat.c ldbmtest.c sizecount.c \
ldif.c ldif2id2children.c ldif2id2entry.c ldif2index.c ldif2ldbm.c \
mimic.c
SRCS2 = ldif2id2children-bdb2.c ldif2id2entry-bdb2.c \
ldif2index-bdb2.c ldif2ldbm-bdb2.c
XSRCS = edb2-vers.c
EDB2LDIFSRCS = edb2ldif.c ldapsyntax.c
EDB2LDIFOBJS = edb2ldif.o ldapsyntax.o
OBJS2 = mimic.o \
../config.o ../ch_malloc.o ../backend.o ../charray.o \
../aclparse.o ../schema.o ../filterentry.o \
../acl.o ../phonetic.o ../attr.o ../value.o ../entry.o \
../dn.o ../filter.o ../str2filter.o ../ava.o ../init.o \
../schemaparse.o
all-local: build-ldbm build-bdb2 build-edb2ldif build-chlog2replog
build-ldbm: FORCE
@if [ "$(BUILD_LDBM)" = "yes" ]; then \
$(MAKE) $(MFLAGS) ldbm-tools; \
else \
echo "run configure with --with-ldbm to build LDBM tools"; \
fi
build-bdb2: FORCE
@if [ "$(BUILD_BDB2)" = "yes" ]; then \
$(MAKE) $(MFLAGS) bdb2-tools; \
else \
echo "run configure with --enable-bdb2 to build BDB2 tools"; \
fi
ldbm-tools: $(PROGRAMS)
bdb2-tools: $(PROGRAMS2)
build-edb2ldif: FORCE
@if [ "$(HAVE_ISODE)" = "yes" ]; then \
$(MAKE) $(MFLAGS) edb2ldif; \
else \
echo "run configure with --with-isode to build edb2ldif"; \
fi
edb2ldif: edb2-vers.o
$(CC) $(LDFLAGS) -o $@ $(EDB2LDIFOBJS) edb2-vers.o $(LIBS)
edb2-vers.c: $(EDB2LDIFOBJS)
$(RM) $@
(u=$${USER-root} v=`$(CAT) $(VERSIONFILE)` d=`$(PWD)` h=`$(HOSTNAME)` \
t=`$(DATE)`; $(SED) -e "s|%WHEN%|$${t}|" \
-e "s|%WHOANDWHERE%|$${u}@$${h}:$${d}|" \
-e "s|%VERSION%|$${v}|" \
< Vers-edb2.c > $@)
build-chlog2replog: FORCE
@if [ "$(HAVE_ISODE)" = "yes" ]; then \
$(MAKE) $(MFLAGS) chlog2replog; \
else \
echo "run configure with --with-isode to build chlog2replog"; \
fi
chlog2replog: chlog2replog.o ../lock.o ../ch_malloc.o $(SLAPD_LIBDEPEND)
$(LTLINK) -o $@ chlog2replog.o ../lock.o ../ch_malloc.o $(LIBS)
ldif2index: ldif2index.o ../libbackends.a $(OBJS2) $(SLAPD_LIBDEPEND)
$(LTLINK) -o $@ ldif2index.o $(OBJS2) ../libbackends.a $(LIBS)
ldif2index-bdb2: ldif2index-bdb2.o ../libbackends.a \
$(OBJS2) $(SLAPD_LIBDEPEND)
$(LTLINK) -o $@ ldif2index-bdb2.o $(OBJS2) ../libbackends.a $(LIBS)
ldif2ldbm: ldif2ldbm.o ../libbackends.a $(OBJS2) $(SLAPD_LIBDEPEND)
$(LTLINK) -o $@ ldif2ldbm.o $(OBJS2) ../libbackends.a $(LIBS)
ldif2ldbm-bdb2: ldif2ldbm-bdb2.o ../libbackends.a $(OBJS2) $(SLAPD_LIBDEPEND)
$(LTLINK) -o $@ ldif2ldbm-bdb2.o $(OBJS2) ../libbackends.a $(LIBS)
ldif2id2entry: ldif2id2entry.o ../libbackends.a $(OBJS2) $(SLAPD_LIBDEPEND)
$(LTLINK) -o $@ ldif2id2entry.o $(OBJS2) ../libbackends.a $(LIBS)
ldif2id2entry-bdb2: ldif2id2entry-bdb2.o ../libbackends.a \
$(OBJS2) $(SLAPD_LIBDEPEND)
$(LTLINK) -o $@ ldif2id2entry-bdb2.o $(OBJS2) ../libbackends.a $(LIBS)
ldif2id2children: ldif2id2children.o ../libbackends.a \
$(OBJS2) $(SLAPD_LIBDEPEND)
$(LTLINK) -o $@ ldif2id2children.o $(OBJS2) ../libbackends.a $(LIBS)
ldif2id2children-bdb2: ldif2id2children-bdb2.o ../libbackends.a \
$(OBJS2) $(SLAPD_LIBDEPEND)
$(LTLINK) -o $@ ldif2id2children-bdb2.o $(OBJS2) ../libbackends.a $(LIBS)
ldbmcat: ldbmcat.o $(SLAPD_LIBDEPEND)
$(LTLINK) -o $@ ldbmcat.o $(LIBS)
ldif: ldif.o $(SLAPD_LIBDEPEND)
$(LTLINK) -o $@ ldif.o $(LIBS)
centipede: centipede.o $(SLAPD_LIBDEPEND)
$(LTLINK) -o $@ centipede.o $(LIBS)
sizecount: sizecount.o ../phonetic.o ../ch_malloc.o $(SLAPD_LIBDEPEND)
$(LTLINK) -o $@ sizecount.o ../phonetic.o ../ch_malloc.o $(LIBS)
ldbmtest: ldbmtest.o ../libbackends.a $(OBJS2) $(SLAPD_LIBDEPEND)
$(LTLINK) -o ldbmtest ldbmtest.o $(OBJS2) ../libbackends.a $(LIBS)
clean-local: FORCE
$(RM) $(PROGRAMS) $(PROGRAMS2) $(XPROGRAMS) $(XSRCS) edb2-vers.c \
*.o core .libs/*
depend-local: FORCE
@DEPEND=no ; DEPEND_LDBM= ; DEPEND_BDB2= ; DEPEND_ISODE= ; \
if [ "$(BUILD_LDBM)" = "yes" ]; then \
DEPEND_LDBM="$(SRCS)"; \
DEPEND=yes ; \
fi; \
if [ "$(BUILD_BDB2)" = "yes" ]; then \
DEPEND_BDB2="$(SRCS2)"; \
DEPEND=yes ; \
fi; \
if [ "$(HAVE_ISODE)" = "yes" ]; then \
DEPEND_ISODE="$(ISODEINCLUDEFLAG) chlog2replog.c $(EDB2LDIFSRCS)"; \
DEPEND=yes ; \
fi; \
if [ "$$DEPEND" = "yes" ]; then \
$(MKDEP) $(DEFS) $(DEFINES) $$DEPEND_ISODE \
$$DEPEND_LDBM $$DEPEND_BDB2; \
else \
echo "slapd-tools: no dependencies to make"; \
fi
install-local: install-ldbm install-bdb2 install-isode FORCE
install-ldbm: FORCE
@-$(MKDIR) $(sbindir)
@if [ "$(BUILD_LDBM)" = "yes" ]; then \
$(LTINSTALL) $(INSTALLFLAGS) -m 755 ldif2ldbm $(sbindir) ; \
$(LTINSTALL) $(INSTALLFLAGS) -m 755 ldif2index $(sbindir) ; \
$(LTINSTALL) $(INSTALLFLAGS) -m 755 ldif2id2entry $(sbindir) ; \
$(LTINSTALL) $(INSTALLFLAGS) -m 755 ldif2id2children $(sbindir) ; \
$(LTINSTALL) $(INSTALLFLAGS) -m 755 ldbmcat $(sbindir) ; \
$(LTINSTALL) $(INSTALLFLAGS) -m 755 ldif $(sbindir) ; \
$(LTINSTALL) $(INSTALLFLAGS) -m 755 centipede $(sbindir) ; \
$(LTINSTALL) $(INSTALLFLAGS) -m 755 ldbmtest $(sbindir) ; \
else \
exit 0 ; \
fi
install-bdb2: FORCE
@-$(MKDIR) $(sbindir)
@if [ "$(BUILD_BDB2)" = "yes" ]; then \
$(LTINSTALL) $(INSTALLFLAGS) -m 755 ldif2ldbm-bdb2 $(sbindir) ; \
$(LTINSTALL) $(INSTALLFLAGS) -m 755 ldif2index-bdb2 $(sbindir) ; \
$(LTINSTALL) $(INSTALLFLAGS) -m 755 ldif2id2entry-bdb2 $(sbindir) ; \
$(LTINSTALL) $(INSTALLFLAGS) -m 755 ldif2id2children-bdb2 $(sbindir) ; \
else \
exit 0 ; \
fi
install-isode: FORCE
@-$(MKDIR) $(sbindir)
@if [ "$(HAVE_ISODE)" = "yes" ]; then \
$(LTINSTALL) $(INSTALLFLAGS) -m 755 edb2ldif $(sbindir); \
$(LTINSTALL) $(INSTALLFLAGS) -m 755 chlog2replog $(sbindir); \
else \
exit 0 ; \
fi