mirror/openldap
2
0
Fork 0
mirror of https://git.openldap.org/openldap/openldap.git synced 2024-12-15 03:01:09 +08:00
Code Issues Packages Projects Releases Wiki Activity
dda62b2b69
openldap/doc/drafts/draft-zeilenga-ldap-authpasswd-xx.txt
Kurt Zeilenga dda62b2b69 Import latest from devel
2000-07-29 03:52:27 +00:00

502 lines
18 KiB
Plaintext
Raw Blame History

This file contains invisible Unicode characters

This file contains invisible Unicode characters that are indistinguishable to humans but may be processed differently by a computer. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

INTERNET-DRAFT Kurt D. Zeilenga
Intended Category: Standard Track OpenLDAP Foundation
Expires: 11 January 2001 11 July 2000
LDAP Authentication Password Attribute
<draft-zeilenga-ldap-authpasswd-03.txt>
1. Status of this Memo
This document is an Internet-Draft and is in full conformance with all
provisions of Section 10 of RFC2026.
This document is intended to be, after appropriate review and
revision, submitted to the RFC Editor as a Standard Track document.
Distribution of this memo is unlimited. Technical discussion of this
document will take place on the IETF LDAP Extension Working Group
mailing list <ietf-ldapext@netscape.com>. Please send editorial
comments directly to the author <Kurt@OpenLDAP.org>.
Internet-Drafts are working documents of the Internet Engineering Task
Force (IETF), its areas, and its working groups. Note that other
groups may also distribute working documents as Internet-Drafts.
Internet-Drafts are draft documents valid for a maximum of six months
and may be updated, replaced, or obsoleted by other documents at any
time. It is inappropriate to use Internet-Drafts as reference
material or to cite them other than as ``work in progress.''
The list of current Internet-Drafts can be accessed at
http://www.ietf.org/ietf/1id-abstracts.txt The list of Internet-Draft
Shadow Directories can be accessed at http://www.ietf.org/shadow.html.
Copyright 2000, The Internet Society. All Rights Reserved.
Please see the Copyright section near the end of this document for
more information.
2. Abstract
This document describes schema for storing information in support of
user/password authentication in a LDAP [RFC2251] directory. The
document defines the authPassword attribute type and related schema.
The attribute type is used to store values derived from the user's
password(s) (commonly using cryptographic strength one-way hash).
authPassword is intended to used instead of clear text password
Zeilenga [Page 1]
INTERNET-DRAFT LDAP AuthPasswd 11 July 2000
storage mechanisms such as userPassword [RFC2256]. The values of
authPassword may be used to support both LDAP "simple" and SASL
[RFC2222] password authentication mechanisms [RFC2829].
The key words ``MUST'', ``MUST NOT'', ``REQUIRED'', ``SHALL'', ``SHALL
NOT'', ``SHOULD'', ``SHOULD NOT'', ``RECOMMENDED'', and ``MAY'' in
this document are to be interpreted as described in RFC 2119
[RFC2119].
3. Background and Intended Use
The userPassword attribute type [RFC 2256] is intended be used to used
to support the LDAP [RFC2251] "simple" bind operation. However,
values of userPassword must be clear text passwords. It is often
desirable to store values derived from the user's password(s) instead
of actual passwords.
The authPassword attribute type is intended to be used to store
information used to implement password based authentication. The
attribute type may be used by LDAP servers to implement user/password
authentication operations [RFC2829] such "simple" and SASL [RFC2222] /
DIGEST-MD5 [RFC2831].
The attribute type supports multiple storage schemes. A matching rule
is provided for use with extensible search filters to allow clients to
assert that a clear text password "matches" one of the attribute's
values. Storage schemes often use of cryptographic strength one-way
hashing.
This attribute may be used in conjunction with server side password
generation mechanisms (such as [PW-EXOP]).
Access to this attribute may governed by administrative controls such
as those which implement password change policies.
4. Schema Definitions
The following schema definitions are described in terms of LDAPv3
Attribute Syntax Definitions [RFC2252] with specific syntax detailed
using Augmented BNF [RFC2234].
Editor's Note: object identifiers (OIDs) will be assigned before this
document is published as an RFC.
4.1. authPasswordSyntax
Zeilenga [Page 2]
INTERNET-DRAFT LDAP AuthPasswd 11 July 2000
( authPasswordSyntaxOID
DESC 'authentication password syntax' )
Values of this syntax are encoded according to the following BNF:
authPasswordValue = w scheme s [authInfo] s authValue w
scheme = <an IA5 string of uppercase letters, numbers,
and "-", "_", and "/">
authInfo = schemeSpecificValue
authValue = schemeSpecfiicValue
schemeSpecificValue = <an IA5 printable string
not containing "$" or " ">
s = w sep w
w = *sp
sep = "$" ; an IA5 dollar sign (36)
sp = " " ; an IA5 space (20)
where scheme describes the storage mechanism, authInfo and authValue
are a scheme specific. The authInfo field is often a base64 encoded
salt. The authValue field is often a base64 encoded value derived
from a user's password(s). Values of this attribute are case
sensitive.
This document describes a number of schemes, as well as requirements
for the scheme naming, in section 5.
4.2. authPasswordMatch
( authPasswordMatchOID
NAME 'authPasswordMatch'
DESC 'authentication password matching rule'
SYNTAX 1.3.6.1.4.1.1466.115.121.1.40{128} )
This matching rule allows a client to assert that a password matches
values of authPasswordSyntax using an extensibleMatch filter
component. Each value is matched per its scheme. The assertion is
TRUE if one or more attribute values matches the asserted value, FALSE
if all values do not matches, and Undefined otherwise.
Servers which support use of this matching rule SHOULD publish
appropriate matchingRuleUse values per [RFC2252], 4.4.
Transfer of authPasswordMatch assertion values is strongly discouraged
where the underlying transport service cannot guarantee
confidentiality and may result in disclosure of the values to
unauthorized parties.
Zeilenga [Page 3]
INTERNET-DRAFT LDAP AuthPasswd 11 July 2000
4.3. supportedAuthPasswordSchemes
( supportedAuthPasswordSchemesOID
NAME 'supportedAuthPasswordSchemes'
DESC 'supported password storage schemes'
EQUALITY caseExactIA5Match
SYNTAX 1.3.6.1.4.1.1466.115.121.1.26{32}
USAGE dSAOperation )
The values of this attribute are names of supported authentication
password schemes which the server supports. The syntax of a scheme
name is described in section 4.1. This attribute may only be present
in the root DSE. If the server does not support any mechanisms this
attribute will not be present.
4.4. authPassword
( authPasswordOID NAME 'authPassword'
SYNTAX authPasswordSyntaxOID )
The values of this attribute are representative of the user's
password(s) and conform to the authPasswordSyntax described in 4.1.
The values of this attribute may be used for authentication purposes.
This attribute type is defined without any built-in matching rules.
The absence of an EQUALITY matching rules disallows modification of
individual values.
Transfer of authPassword values is strongly discouraged where the
underlying transport service cannot guarantee confidentiality and may
result in disclosure of the values to unauthorized parties.
4.5. authPasswordObject
( authPasswordObjectOID NAME 'authPasswordObject'
DESC 'authentication password mix in class'
MAY 'authPassword' AUXILIARY )
Entries of this object class may contain authPassword attribute types.
5. Schemes
This section describes the "MD5", "SHA1", and "SASL/DIGEST-MD5".
Other schemes may be defined by other documents. Schemes starting
with string "SASL/" indicate association with a SASL mechanism.
Zeilenga [Page 4]
INTERNET-DRAFT LDAP AuthPasswd 11 July 2000
Schemes which are not described by standard track documents SHOULD be
named with a leading "X-" or, if associated with a SASL mechanism,
"SASL/X-" to indicate they are a private or implementation specific
mechanism, or may be named using the dotted-decimal representation
[RFC2252] of an OID assigned to the mechanism.
5.1. MD5 scheme
The MD5 [RFC1321] scheme name is "MD5".
The authValue is the base64 encoding of an MD5 digest of the
concatenation the user password and optional salt. The base64
encoding of the salt is provided in the authInfo field.
Implementations of this scheme must support salts up to 128-bit in
length. Use with a 64-bit or larger salt is RECOMMENDED.
Example:
Given a user "joe" who's password is "mary" and a salt of "salt",
the authInfo field would be the base64 encoding of "salt" and the
authValue field would be the base64 encoding of the MD5 digest of
"marysalt".
A match against an asserted password and an attribute value of this
scheme SHALL be true if and only if the MD5 digest of concatenation of
the asserted value and the salt is equal to the MD5 digest contained
in AuthValue. The match SHALL be undefined if the server is unable to
complete the equality test for any reason. Otherwise the match SHALL
be false.
Values of this scheme SHOULD only be used to implement simple
user/password authentication.
It is RECOMMENDED that values of this scheme be protected as if they
were clear text passwords.
5.2. SHA1 scheme
The SHA1 [SHA1] scheme name is "SHA1".
The authValue is the base64 encoding of an SHA1 digest of the
concatenation the user password and the optional salt. The base64
encoding of the salt is provided in the authInfo field.
Implementations of this scheme must support salts up to 128-bit in
length. Use with a 64-bit or larger salt is RECOMMENDED.
Example:
Zeilenga [Page 5]
INTERNET-DRAFT LDAP AuthPasswd 11 July 2000
Given a user "joe" who's password is "mary" and a salt of "salt",
the authInfo field would be the base64 encoding of "salt" and the
authValue field would be the base64 encoding of the SHA1 digest of
"marysalt".
A match against an asserted password and an attribute value of this
scheme SHALL be true if and only if the SHA1 digest of concatenation
of the asserted value and the salt is equal to the SHA1 digest
contained in AuthValue. The match SHALL be undefined if the server is
unable to complete the equality test for any reason. Otherwise the
match SHALL be false.
Values of this scheme SHOULD only be used to implement simple
user/password authentication.
It is RECOMMENDED that values of this scheme be protected as if they
were clear text passwords.
5.3. DIGEST-MD5 scheme
The DIGEST-MD5 scheme name is "SASL/DIGEST-MD5".
The authValue is the base64 encoding of
H( { username-value, ":", realm-value, ":", passwd } )
and authInfo is the base64 encoding of
{ username-value, ":", realm-value }
as defined by RFC2831.
Example:
Given a user "joe" within the realm "localhost" who's password is
"mary", the info field would be the base64 encoding of
"joe:localhost" and the authValue field would be the base64 encoding
of the MD5 digest of "joe:localhost:mary".
Values of this scheme SHOULD only be used to implement the
SASL/DIGEST-MD5 as described by the Authentication Methods for LDAP
[RFC2829]. A simple password assertion against a value of this scheme
SHALL be considered undefined.
Values of this scheme MUST be protected as if it the values were clear
text passwords per reasons detailed in DIGEST-MD5, Section 3.9,
"Storing Passwords."
6. Implementation Issues
Zeilenga [Page 6]
INTERNET-DRAFT LDAP AuthPasswd 11 July 2000
For implementations of this specification:
Servers MAY restrict which schemes are used in conjunction with a
particular authentication process but SHOULD use all values of
selected schemes. If the asserted password matches any of the
stored values, the asserted password SHOULD be considered valid.
Servers MAY use other authentication storage mechanisms, such as
userPassword or an external password store, in conjunction with
authPassword to support the authentication process.
Servers that support simple bind MUST support the MD5 scheme and
SHOULD support the SHA1 scheme.
Servers SHOULD not publish values of authPassword nor allow
operations which expose authPassword or AuthPasswordMatch values to
unless confidentiality protection is in place.
Clients SHOULD not initiate operations which provide or request
values of authPassword or make authPasswordMatch assertions unless
confidentiality protection is in place.
Clients SHOULD not assume that a successful AuthPasswordMatch,
whether by compare or search, is sufficient to gain directory
access. The bind operation MUST be used to authentication to the
directory.
7. Security Considerations
This document describes how authentication information may be stored
in a directory. Authentication information must be adequately
protected as unintended disclosure will allow attackers to gain
immediate access to the directory as described by [RFC2829].
Values of authPassword SHOULD be protected as if they were clear text
passwords. When values are transferred, privacy protections, such as
IPSEC or TLS, SHOULD be in place.
Clients SHOULD use strong authentication mechanisms [RFC2829].
AuthPasswordMatch matching rule allows applications to test the
validity of a user password and, hence, may be used to mount a
dictionary attack. Servers SHOULD take appropriate measures to
protect the directory from such attacks.
Some password schemes may require CPU intensive operations. Servers
SHOULD take appropriate measures to protect against Denial of Service
attacks.
Zeilenga [Page 7]
INTERNET-DRAFT LDAP AuthPasswd 11 July 2000
AuthPassword does not restrict an authentication identity to a single
password. An attacker who gains write access to this attribute may
store additional values without disabling the user's true password(s).
Use of policy aware clients and servers is RECOMMENDED.
The level of protection offered against various attacks differ from
scheme to scheme. It is RECOMMENDED that servers support scheme
selection as a configuration item. This allows for a scheme to be
easily disabled if a significant security flaw is discovered.
8. Copyright
Copyright 2000, The Internet Society. All Rights Reserved.
This document and translations of it may be copied and furnished to
others, and derivative works that comment on or otherwise explain it
or assist in its implementation may be prepared, copied, published and
distributed, in whole or in part, without restriction of any kind,
provided that the above copyright notice and this paragraph are
included on all such copies and derivative works. However, this
document itself may not be modified in any way, such as by removing
the copyright notice or references to the Internet Society or other
Internet organizations, except as needed for the purpose of
developing Internet standards in which case the procedures for
copyrights defined in the Internet Standards process must be followed,
or as required to translate it into languages other than English.
The limited permissions granted above are perpetual and will not be
revoked by the Internet Society or its successors or assigns.
This document and the information contained herein is provided on an
"AS IS" basis and THE AUTHORS, THE INTERNET SOCIETY, AND THE INTERNET
ENGINEERING TASK FORCE DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED,
INCLUDING BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF THE
INFORMATION HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED
WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
9. Acknowledgment
This document borrows from a number of IETF documents and is based
upon input from the IETF LDAPext working group.
10. Bibliography
[RFC1321] R. Rivest, "The MD5 Message-Digest Algorithm", RFC 1321,
Zeilenga [Page 8]
INTERNET-DRAFT LDAP AuthPasswd 11 July 2000
April 1992
[RFC2219] S. Bradner, "Key words for use in RFCs to Indicate
Requirement Levels", RFC 2119, March 1997.
[RFC2222] J. Myers, "Simple Authentication and Security Layer (SASL)",
RFC 2222, October 1997.
[RFC2234] D. Crocker (editor), P. Overell, "Augmented BNF for Syntax
Specifications: ABNF", RFC 2234, November 1997.
[RFC2251] M. Wahl, T. Howes, S. Kille, "Lightweight Directory Access
Protocol (v3)", RFC 2251, December 1997.
[RFC2252] M. Wahl, A. Coulbeck, T. Howes, S. Kille, "Lightweight
Directory Access Protocol (v3): Attribute Syntax
Definitions", RFC 2252, December 1997.
[RFC2256] M. Wahl, "A Summary of the X.500(96) User Schema for use
with LDAPv3", RFC 2256, December 1997.
[RFC2307] L. Howard, "An Approach for Using LDAP as a Network
Information Service", RFC 2307, March 1998.
[RFC2829] M. Wahl, H. Alvestrand, J. Hodges, RL "Bob" Morgan,
"Authentication Methods for LDAP", RFC 2829, June 2000.
[RFC2831] P. Leach, C. Newman, "Using Digest Authentication as a SASL
Mechanism", RFC 2831, June 2000.
[PW-EXOP] K. Zeilenga, "LDAP Password Modify Extended Operation"
draft-zeilenga-ldap-passwd-exop-xx.txt, a work in progress.
[SHA1] NIST, FIPS PUB 180-1: Secure Hash Standard, April 1995.
11. Author's Address
Kurt D. Zeilenga
OpenLDAP Foundation
<Kurt@OpenLDAP.org>
Zeilenga [Page 9]
Reference in New Issue View Git Blame Copy Permalink