mirror/openldap
2
0
Fork 0
mirror of https://git.openldap.org/openldap/openldap.git synced 2024-12-21 03:10:25 +08:00
Code Issues Packages Projects Releases Wiki Activity
a3c49b8709
openldap/doc/drafts/draft-ietf-ldapext-ldapv3-vlv-xx.txt
Howard Chu e780309a0c Update to -09, last available revision
2009-02-05 20:50:26 +00:00

740 lines
34 KiB
Plaintext
Raw Blame History

This file contains invisible Unicode characters

This file contains invisible Unicode characters that are indistinguishable to humans but may be processed differently by a computer. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

Internet-Draft D. Boreham, Bozeman Pass
LDAPext Working Group J. Sermersheim, Novell
Intended Category: Standards Track A. Kashi, Microsoft
<draft-ietf-ldapext-ldapv3-vlv-09.txt>
Expires: Jun 2003 Nov 2002
LDAP Extensions for Scrolling View Browsing of Search Results
1. Status of this Memo
This document is an Internet-Draft and is in full conformance with
all provisions of Section 10 of RFC2026.
Internet-Drafts are working documents of the Internet Engineering
Task Force (IETF), its areas, and its working groups. Note that other
groups may also distribute working documents as Internet-Drafts.
Internet-Drafts are draft documents valid for a maximum of six months
and may be updated, replaced, or obsoleted by other documents at any
time. It is inappropriate to use Internet-Drafts as reference
material or to cite them other than as "work in progress."
The list of current Internet-Drafts can be accessed at
http://www.ietf.org/ietf/1id-abstracts.txt
The list of Internet-Draft Shadow Directories can be accessed at
http://www.ietf.org/shadow.html.
This document is intended to be submitted, after review and revision,
as a Standards Track document. Distribution of this memo is
unlimited.
Please send comments to the authors.
2. Abstract
This document describes a Virtual List View extension for the
Lightweight Directory Access Protocol (LDAP) Search operation. This
extension is designed to allow the "virtual list box" feature, common
in existing commercial e-mail address book applications, to be
supported efficiently by LDAP servers. LDAP servers' inability to
support this client feature is a significant impediment to LDAP
replacing proprietary protocols in commercial e-mail systems.
The extension allows a client to specify that the server return, for
a given LDAP search with associated sort keys, a contiguous subset of
the search result set. This subset is specified in terms of offsets
into the ordered list, or in terms of a greater than or equal
comparison value.
Boreham et al Internet-Draft 1
LDAP Extensions for Scrolling View Nov 2002
Browsing of Search Results
3. Conventions used in this document
The key words "MUST", "SHALL", "SHOULD", "SHOULD NOT", and "MAY" in
this document are to be interpreted as described in RFC 2119
[Bradner97].
Protocol elements are described using ASN.1 [X.680]. The term "BER-
encoded" means the element is to be encoded using the Basic Encoding
Rules [X.690] under the restrictions detailed in Section 5.1 of
[LDAPPROT].
The phrase "subsequent virtual list request" is used in this document
to describe a search request accompanied by a VirtualListViewRequest
control, where the search base, scope, and filter are the same as a
previous search request also accompanied by a VirtualListViewRequest
control, and where the contextID of the subsequent
VirtualListViewRequest control, is set to that of the contextID in
the VirtualListViewResponse control that accompanied the previous
search response.
The phrase "contiguous virtual list request" is used to describe a
subsequent virtual list request which is requesting search results
adjoining or overlapping the result returned from the prior virtual
list request.
4. Background
A Virtual List is a graphical user interface technique employed where
ordered lists containing a large number of entries need to be
displayed. A window containing a small number of visible list entries
is drawn. The visible portion of the list may be relocated to
different points within the list by means of user input. This input
can be to a scroll bar slider; from cursor keys; from page up/down
keys; from alphanumeric keys for "typedown". The user is given the
impression that they may browse the complete list at will, even
though it may contain millions of entries. It is the fact that the
complete list contents are never required at any one time that
characterizes Virtual List View. Rather than fetch the complete list
from wherever it is stored (typically from disk or a remote server),
only that information which is required to display the part of the
list currently in view is fetched. The subject of this document is
the interaction between client and server required to implement this
functionality in the context of the results from an ordered [SSS]
Lightweight Directory Access Protocol (LDAP) search operation
[LDAPPROT].
For example, suppose an e-mail address book application displays a
list view onto the list containing the names of all the holders of e-
mail accounts at a large university. The list is ordered
alphabetically. While there may be tens of thousands of entries in
this list, the address book list view displays only 20 such accounts
Boreham et al Internet-Draft 2
LDAP Extensions for Scrolling View Nov 2002
Browsing of Search Results
at any one time. The list has an accompanying scroll bar and text
input window for type-down. When first displayed, the list view shows
the first 20 entries in the list, and the scroll bar slider is
positioned at the top of its range. Should the user drag the slider
to the bottom of its range, the displayed contents of the list view
should be updated to show the last 20 entries in the list. Similarly,
if the slider is positioned somewhere in the middle of its travel,
the displayed contents of the list view should be updated to contain
the 20 entries located at that relative position within the complete
list. Starting from any display point, if the user uses the cursor
keys or clicks on the scroll bar to request that the list be scrolled
up or down by one entry, the displayed contents should be updated to
reflect this. Similarly the list should be displayed correctly when
the user requests a page scroll up or down. Finally, when the user
types characters in the type-down window, the displayed contents of
the list should "jump" or "seek" to the appropriate point within the
list. For example, if the user types "B", the displayed list could
center around the first user with a name beginning with the letter
"B". When this happens, the scroll bar slider should also be updated
to reflect the new relative location within the list.
This document defines a request control which extends the LDAP search
operation. Always used in conjunction with the server side sorting
control [SSS], this allows a client to retrieve selected portions of
large search result set in a fashion suitable for the implementation
of a virtual list view.
5. Client-Server Interaction
The Virtual List View control extends a regular LDAP Search operation
which MUST also include a server-side sorting control [SSS]. Rather
than returning the complete set of appropriate SearchResultEntry
messages, the server is instructed to return a contiguous subset of
those entries, taken from the ordered result set, centered around a
particular target entry. Henceforth, in the interests of brevity, the
ordered search result set will be referred to as "the list".
The sort control may contain any sort specification valid for the
server. The attributeType field in the first SortKeyList sequence
element has special significance for "typedown". The Virtual List
View control acts upon a set of ordered entries and this order must
be repeatable for all subsequent virtual list requests. The server-
side sorting control is intended to aid in this ordering, but other
mechanisms may need to be employed to produce a repeatable order--
especially for entries that don't have a value of the sort key.
The desired target entry and the number of entries to be returned,
both before and after that target entry in the list, are determined
by the client's VirtualListViewRequest control.
Boreham et al Internet-Draft 3
LDAP Extensions for Scrolling View Nov 2002
Browsing of Search Results
When the server returns the set of entries to the client, it attaches
a VirtualListViewResponse control to the SearchResultDone message.
The server returns in this control: its current estimate for the list
content count, the location within the list corresponding to the
target entry, any error codes, and optionally a context identifier.
The target entry is specified in the VirtualListViewRequest control
by one of two methods. The first method is for the client to indicate
the target entry's offset within the list. The second way is for the
client to supply an attribute assertion value. The value is compared
against the values of the attribute specified as the primary sort key
in the sort control attached to the search operation. The first sort
key in the SortKeyList is the primary sort key. The target entry is
the first entry in the list with value greater than or equal to (in
the primary sort order), the presented value. The order is determined
by rules defined in [SSS]. Selection of the target entry by this
means is designed to implement "typedown". Note that it is possible
that no entry satisfies these conditions, in which case there is no
target entry. This condition is indicated by the server returning the
special value contentCount + 1 in the target position field.
Because the server may not have an accurate estimate of the number of
entries in the list, and to take account of cases where the list size
is changing during the time the user browses the list, and because
the client needs a way to indicate specific list targets "beginning"
and "end", offsets within the list are transmitted between client and
server as ratios---offset to content count. The server sends its
latest estimate as to the number of entries in the list (content
count) to the client in every response control. The client sends its
assumed value for the content count in every request control. The
server examines the content count and offsets presented by the client
and computes the corresponding offsets within the list, based on its
own idea of the content count.
Si = Sc * (Ci / Cc)
Where:
Si is the actual list offset used by the server
Sc is the server's estimate for content count
Ci is the client's submitted offset
Cc is the client's submitted content count
The result is rounded to the nearest integer.
If the content count is stable, and the client returns to the server
the content count most recently received, Cc = Sc and the offsets
transmitted become the actual server list offsets.
The following special cases exist when the client is specifying the
offset and content count:
- an offset of one and a content count of non-one (Ci = 1, Cc != 1)
indicates that the target is the first entry in the list.
Boreham et al Internet-Draft 4
LDAP Extensions for Scrolling View Nov 2002
Browsing of Search Results
- equivalent values (Ci = Cc) indicate that the target is the last
entry in the list.
- a content count of zero (Cc = 0, Ci != 0) means the client has no
idea what the content count is, the server MUST use its own
content count estimate in place of the client's.
Because the server always returns contentCount and targetPosition,
the client can always determine which of the returned entries is the
target entry. Where the number of entries returned is the same as the
number requested, the client is able to identify the target by simple
arithmetic. Where the number of entries returned is not the same as
the number requested (because the requested range crosses the
beginning or end of the list, or both), the client MUST use the
target position and content count values returned by the server to
identify the target entry. For example, suppose that 10 entries
before and 10 after the target were requested, but the server returns
13 entries, a content count of 100 and a target position of 3. The
client can determine that the first entry must be entry number 1 in
the list, therefore the 13 entries returned are the first 13 entries
in the list, and the target is the third one.
A server-generated contextID MAY be returned to clients. A client
receiving a contextID MUST return it unchanged or not return it at
all, in a subsequent request which relates to the same list. The
purpose of this interaction is to maintain state information between
the client and server.
6. The Controls
Support for the virtual list view control extension is indicated by
the presence of the OID "2.16.840.1.113730.3.4.9" in the
supportedControl attribute of a server's root DSE.
6.1. Request Control
This control is included in the SearchRequest message as part of the
controls field of the LDAPMessage, as defined in Section 4.1.12 of
[LDAPPROT]. The controlType is set to "2.16.840.1.113730.3.4.9". If
this control is included in a SearchRequest message, a Server Side
Sorting request control [SSS] MUST also be present in the message.
The controlValue, an OCTET STRING, is the BER-encoding of the
following SEQUENCE:
VirtualListViewRequest ::= SEQUENCE {
beforeCount INTEGER (0..maxInt),
afterCount INTEGER (0..maxInt),
target CHOICE {
byOffset [0] SEQUENCE {
offset INTEGER (1 .. maxInt),
contentCount INTEGER (0 .. maxInt) },
Boreham et al Internet-Draft 5
LDAP Extensions for Scrolling View Nov 2002
Browsing of Search Results
greaterThanOrEqual [1] AssertionValue },
contextID OCTET STRING OPTIONAL }
beforeCount indicates how many entries before the target entry the
client wants the server to send.
afterCount indicates the number of entries after the target entry the
client wants the server to send.
offset and contentCount identify the target entry as detailed in
section 5.
greaterThanOrEqual is a matching rule assertion value defined in
[LDAPPROT]. The assertion value is encoded according to the ORDERING
matching rule for the attributeDescription in the sort control [SSS].
If present, the value supplied in greaterThanOrEqual is used to
determine the target entry by comparison with the values of the
attribute specified as the primary sort key. The first list entry
who's value is no less than (less than or equal to when the sort
order is reversed) the supplied value is the target entry.
If present, the contextID field contains the value of the most
recently received contextID field from a VirtualListViewResponse
control for the same list view. If the contextID is not known because
no contextID has been sent by the server in a VirtualListViewResponse
control, it SHALL be omitted. If the server receives a contextID that
is invalid, it SHALL fail the search operation and indicate the
failure with a protocolError (3) value in the virtualListViewResult
field of the VirtualListViewResponse. The contextID provides state
information between the client and server. This state information is
used by the server to ensure continuity contiguous virtual list
requests. When a server receives a VirtualListViewRequest control
that includes a contextID, it SHALL determine whether the client has
sent a contiguous virtual list request and SHALL provide contiguous
entries if possible. If a valid contextID is sent, and the server is
unable to determine whether contiguous data is requested, or is
unable to provide requested contiguous data, it SHALL fail the search
operation and indicate the failure with an unwillingToPerform (53)
value in the virtualListViewResult field of the
VirtualListViewResponse. contextID values have no validity outside
the connection and query with which they were received. A client MUST
NOT submit a contextID which it received from a different connection,
a different query, or a different server.
The type AssertionValue and value maxInt are defined in [LDAPPROT].
6.2. Response Control
Boreham et al Internet-Draft 6
LDAP Extensions for Scrolling View Nov 2002
Browsing of Search Results
If the request control is serviced, this response control is included
in the SearchResultDone message as part of the controls field of the
LDAPMessage, as defined in Section 4.1.12 of [LDAPPROT].
The controlType is set to "2.16.840.1.113730.3.4.10". The
controlValue, an OCTET STRING, is the BER-encoding of the following
SEQUENCE:
VirtualListViewResponse ::= SEQUENCE {
targetPosition INTEGER (0 .. maxInt),
contentCount INTEGER (0 .. maxInt),
virtualListViewResult ENUMERATED {
success (0),
operationsError (1),
protocolError (3),
unwillingToPerform (53),
insufficientAccessRights (50),
timeLimitExceeded (3),
adminLimitExceeded (11),
innapropriateMatching (18),
sortControlMissing (60),
offsetRangeError (61),
other(80),
... },
contextID OCTET STRING OPTIONAL }
targetPosition gives the list offset for the target entry.
contentCount gives the server's estimate of the current number of
entries in the list. Together these give sufficient information for
the client to update a list box slider position to match the newly
retrieved entries and identify the target entry. The contentCount
value returned SHOULD be used in a subsequent VirtualListViewRequest
control.
contextID is a server-defined octet string. If present, the contents
of the contextID field SHOULD be returned to the server by a client
in a subsequent virtual list request. The presence of a contextID
here indicates that the server is willing to return contiguous data
from a subsequent search request which uses the same search criteria,
accompanied by a VirtualListViewRequest which indicates that the
client wishes to receive an adjoining page of data.
The virtualListViewResult codes which are common to the LDAP
searchResultDone (adminLimitExceeded, timeLimitExceeded,
operationsError, unwillingToPerform, insufficientAccessRights,
success, other) have the same meanings as defined in [LDAPPROT], but
they pertain specifically to the VLV operation. For example, the
server could exceed a VLV-specific administrative limit while
processing a SearchRequest with a VirtualListViewRequest control.
Obviously, the same administrative limit would not be exceeded should
Boreham et al Internet-Draft 7
LDAP Extensions for Scrolling View Nov 2002
Browsing of Search Results
the same SearchRequest be submitted by the client without the
VirtualListViewRequest control. In this case, the client can
determine that the administrative limit has been exceeded in
servicing the VLV request, and can if it chooses resubmit the
SearchRequest without the VirtualListViewRequest control, or with
different parameters.
insufficientAccessRights means that the server denied the client
permission to perform the VLV operation.
If the server determines that the results of the search presented
exceed the range specified in INTEGER values, or if the client
specifies an invalid offset or contentCount, the server MUST set the
virtualListViewResult value to offsetRangeError.
6.2.1 virtualListViewError
A new LDAP error is introduced called virtualListViewError. Its value
is 76. This error indicates that the search operation failed due to
the inclusion of the VirtualListViewRequest control.
If the resultCode in the SearchResultDone message is set to
virtualListViewError (76), then the virtualListViewResult value MUST
NOT be success (as virtualListViewResult indicates the specific error
condition). If resultCode in the SearchResultDone message is not set
to virtualListViewError (76), then the virtualListViewResult value
SHOULD be success (0) and its value MUST be ignored.
7. Protocol Example
Here we walk through the client-server interaction for a specific
virtual list view example: The task is to display a list of all 78564
persons in the US company "Ace Industry". This will be done by
creating a graphical user interface object to display the list
contents, and by repeatedly sending different versions of the same
virtual list view search request to the server. The list view
displays 20 entries on the screen at a time.
We form a search with baseObject of "o=Ace Industry,c=us"; scope of
wholeSubtree; and filter of "(objectClass=person)". We attach a
server-side sort control [SSS] to the search request, specifying
ascending sort on attribute "cn". To this search request, we attach a
virtual list view request control with contents determined by the
user activity and send the search request to the server. We display
the results from each search result entry in the list window and
update the slider position.
When the list view is first displayed, we want to initialize the
contents showing the beginning of the list. Therefore, we set
beforeCount to 0, afterCount to 19, contentCount to 0, offset to 1
and send the request to the server. The server duly returns the first
Boreham et al Internet-Draft 8
LDAP Extensions for Scrolling View Nov 2002
Browsing of Search Results
20 entries in the list, plus a content count of 78564 and
targetPosition of 1. We therefore leave the scroll bar slider at its
current location (the top of its range).
Say that next the user drags the scroll bar slider down to the bottom
of its range. We now wish to display the last 20 entries in the list,
so we set beforeCount to 19, afterCount to 0, contentCount to 78564,
offset to 78564 and send the request to the server. The server
returns the last 20 entries in the list, plus a content count of
78564 and a targetPosition of 78564.
Next the user presses a page up key. Our page size is 20, so we set
beforeCount to 0, afterCount to 19, contentCount to 78564, offset to
78564-19-20 and send the request to the server. The server returns
the preceding 20 entries in the list, plus a content count of 78564
and a targetPosition of 78525.
Now the user grabs the scroll bar slider and drags it to 68% of the
way down its travel. 68% of 78564 is 53424 so we set beforeCount to
9, afterCount to 10, contentCount to 78564, offset to 53424 and send
the request to the server. The server returns the preceding 20
entries in the list, plus a content count of 78564 and a
targetPosition of 53424.
Lastly, the user types the letter "B". We set beforeCount to 9,
afterCount to 10 and greaterThanOrEqual to "B". The server finds the
first entry in the list not less than "B", let's say "Babs Jensen",
and returns the nine preceding entries, the target entry, and the
proceeding 10 entries. The server returns a content count of 78564
and a targetPosition of 5234 and so the client updates its scroll bar
slider to 6.7% of full scale.
8. Notes for Implementers
While the feature is expected to be generally useful for arbitrary
search and sort specifications, it is specifically designed for those
cases where the result set is very large. The intention is that this
feature be implemented efficiently by means of pre-computed indices
pertaining to a set of specific cases. For example, an offset
relating to "all the employees in the local organization, sorted by
surname" would be a common case.
The intention for client software is that the feature should fit
easily with the host platform's graphical user interface facilities
for the display of scrolling lists. Thus the task of the client
implementers should be one of reformatting up the requests for
information received from the list view code to match the format of
the virtual list view request and response controls.
Boreham et al Internet-Draft 9
LDAP Extensions for Scrolling View Nov 2002
Browsing of Search Results
Client implementers MUST be aware that any offset value returned by
the server might be approximate. Do not design clients that only
operate correctly when offsets are exact. However, if contextIDs are
used, and adjoining pages of information are requested, the server
will return contiguous data.
Server implementers using indexing technology which features
approximate positioning should consider returning contextIDs to
clients. The use of a contextID will allow the server to distinguish
between client requests which relate to different displayed lists on
the client. Consequently the server can decide more intelligently
whether to reposition an existing database cursor accurately to
within a short distance of its current position, or to reposition to
an approximate position. Thus the client will see precise offsets for
"short" repositioning (e.g. paging up or down), but approximate
offsets for a "long" reposition (e.g. a slider movement).
Server implementers are free to return an LDAP result code of
virtualListViewError and a virtualListViewResult of
unwillingToPerform should their server be unable to service any
particular VLV search. This might be because the resolution of the
search is computationally infeasible, or because excessive server
resources would be required to service the search.
Client implementers should note that this control is only defined on
a client interaction with a single server. If a search scope spans
multiple naming contexts that are not held locally, search result
references will be returned, and may occur at any point in the search
operation. The client is responsible for deciding when and how to
apply this control to the referred-to servers, and how to collate the
results from multiple servers.
9. Relationship to "Simple Paged Results"
These controls are designed to support the virtual list view, which
has proved hard to implement with the Simple Paged Results mechanism
[SPaged]. However, the controls described here support any operation
possible with the Simple Paged Results mechanism. The two mechanisms
are not complementary; rather one has a superset of the other's
features. One area where the mechanism presented here is not a strict
superset of the Simple Paged Results scheme is that here we require a
sort order to be specified. No such requirement is made for paged
results.
10. Security Considerations
Server implementers may wish to consider whether clients are able to
consume excessive server resources in requesting virtual list
operations. Access control to the feature itself; configuration
Boreham et al Internet-Draft 10
LDAP Extensions for Scrolling View Nov 2002
Browsing of Search Results
options limiting the feature's use to certain predetermined search
base DNs and filters; throttling mechanisms designed to limit the
ability for one client to soak up server resources, may be
appropriate.
Consideration should be given as to whether a client will be able to
retrieve the complete contents, or a significant subset of the
complete contents of the directory using this feature. This may be
undesirable in some circumstances and consequently it may be
necessary to enforce some access control or administrative limit.
Clients can, using this control, determine how many entries match a
particular filter, before the entries are returned to the client.
This may require special processing in servers which perform access
control checks on entries to determine whether the existence of the
entry can be disclosed to the client.
Server implementers should exercise caution concerning the content of
the contextID. Should the contextID contain internal server state, it
may be possible for a malicious client to use that information to
gain unauthorized access to information.
11. IANA Considerations
11.1 Request for LDAP Result Code
In accordance with section 3.6 of [LDAPIANA], it is requested that
IANA register the LDAP result code virtualListViewError (76) upon
Standards Action by the IESG. The value 76 has been suggested by
experts, had expert review, and is currently being used by some
implementations. If 76 is unavailable on not chosen, the value in the
paragraphs in Section 6.2.1 will need to be updated. The following
registration template is suggested:
Subject: LDAP Result Code Registration
Person & email address to contact for further information: Jim
Sermersheim
Result Code Name: virtualListViewError
Specification: RFCXXXX
Author/Change Controller: IESG
Comments: request LDAP result codes be assigned
12. Acknowledgements
Chris Weider, Anoop Anantha, and Michael Armijo of Microsoft co-
authored previous versions of this document.
Boreham et al Internet-Draft 11
LDAP Extensions for Scrolling View Nov 2002
Browsing of Search Results
13. Normative References
[X.680] ITU-T Rec. X.680, "Abstract Syntax Notation One (ASN.1) -
Specification of Basic Notation", 1994.
[X.690] ITU-T Rec. X.690, "Specification of ASN.1 encoding rules:
Basic, Canonical, and Distinguished Encoding Rules",
1994.
[LDAPPROT] Wahl, M., Kille, S. and T. Howes, "Lightweight Directory
Access Protocol (v3)", Internet Standard, RFC 2251,
December, 1997.
[SSS] Wahl, M., Herron, A. and T. Howes, "LDAP Control
Extension for Server Side Sorting of Search Results",
RFC 2891, August, 2000.
[Bradner97] Bradner, S., "Key Words for use in RFCs to Indicate
Requirement Levels", BCP 14, RFC 2119, March 1997.
[LDAPIANA] Zeilenga, K., "Internet Assigned Numbers Authority (IANA)
Considerations for the Lightweight Directory Access
Protocol (LDAP)", RFC 3383, September 2002.
14. Informative References
[SPaged] Weider, C., Herron, A., Anantha, A. and T. Howes, "LDAP
Control Extension for Simple Paged Results Manipulation",
RFC2696, September 1999.
15. Authors' Addresses
David Boreham
Bozeman Pass, Inc
+1 406 222 7093
david@bozemanpass.com
Jim Sermersheim
Novell
1800 South Novell Place
Provo, Utah 84606, USA
jimse@novell.com
Asaf Kashi
Microsoft Corporation
1 Microsoft Way
Redmond, WA 98052, USA
+1 425 882-8080
asafk@microsoft.com
Boreham et al Internet-Draft 12
LDAP Extensions for Scrolling View Nov 2002
Browsing of Search Results
16. Full Copyright Statement
Copyright (C) The Internet Society (2002). All Rights Reserved.
This document and translations of it may be copied and furnished to
others, and derivative works that comment on or otherwise explain it
or assist in its implementation may be prepared, copied, published
and distributed, in whole or in part, without restriction of any
kind, provided that the above copyright notice and this paragraph are
included on all such copies and derivative works. However, this
document itself may not be modified in any way, such as by removing
the copyright notice or references to the Internet Society or other
Internet organizations, except as needed for the purpose of
developing Internet standards in which case the procedures for
copyrights defined in the Internet Standards process must be
followed, or as required to translate it into languages other than
English. The limited permissions granted above are perpetual and will
not be revoked by the Internet Society or its successors or assigns.
This document and the information contained herein is provided on an
"AS IS" basis and THE INTERNET SOCIETY AND THE
INTERNET ENGINEERING TASK FORCE DISCLAIMS ALL WARRANTIES, EXPRESS OR
IMPLIED, INCLUDING BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF
THE INFORMATION HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED
WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE."
Boreham et al Internet-Draft 13
Reference in New Issue View Git Blame Copy Permalink