openldap/doc/guide/admin/install.sdf

# $OpenLDAP$
# Copyright 1999-2000, The OpenLDAP Foundation, All Rights Reserved.
# COPYING RESTRICTIONS APPLY, see COPYRIGHT.
H1: Building and Installing slapd & slurpd

Building and installing slapd requires three simple steps: configuring;
making; and installing. The following sections describe each step in
detail. If you are reading this guide, chances are you have already
obtained the software, but just in case, here's where you can get the
latest version of the OpenLDAP package, which includes all of the
software discussed in this guide:
{{URL: ftp://ftp.openldap.org/pub/OpenLDAP/openldap-release.tgz}}

There is also an OpenLDAP Project has an extensive site on the
World Wide Web. This sites contains the latest OpenLDAP news,
release announcements, and pointers to other resources.
You can access the site at: {{URL: http://www.OpenLDAP.org/}}


H2: Pre-Build Configuration

Before building slapd, be sure to take a look at the README file in the
top level directory in the distribution so that you are familiar with the
general configuration and make process.

Briefly, you should edit the include/ldapconfig.h.edit and
Make-common files to contain the site-specific configuration your site
requires before making. The next sections discuss these steps in
more detail.


H3: Editing the {{EX: Make-common}} file

All of the general Make-common configuration variables (e.g.,
ETCDIR, BINDIR, etc.) apply to both slapd and slurpd. There are
additional Make-common configuration variables that also affect how
slapd and slurpd are built. They are:

H4: MAKE_SLAPD

This option controls whether slapd and slurpd get built at all. You
should set it to yes, like this:

E: MAKE_SLAPD = yes

H4: SLAPD_BACKENDS

This option controls which slapd backend databases get built. You
should set it to one or more of the following:

*{{EX: DLDAP_LDBM}} This is the main backend. It is a high-performance
disk-based database suitable for handling up to a million entries or so.
See the LDBMBACKEND and LDBMLIB options below.

*{{EX: DLDAP_PASSWD}} This is a simple search-only backend that can be
pointed at an {{EX: /etc/passwd}} file. It is intended more as an example than
as a real backend.

*{{EX: DLDAP_SHELL}} This backend allows the execution of arbitrary
system administrator-defined commands in response to LDAP
queries. The commands to execute are defined in the configuration file.
See Appendix B for more information on writing shell backend
programs.

Example to enable the LDBM and SHELL backends only:

E: SLAPD_BACKENDS= -DLDAP_LDBM -DLDAP_SHELL

The default is to build all three backends. Note that building a backend
only means that it can be enabled through the configuration file, not
that it will automatically be enabled.

H4: LDBMBACKEND

This option should only be defined if you have enabled the LDBM
backend as described above. The LDBM backend relies on a
low-level hash or B-tree package for its underlying database. This
option selects which package it will use. The currently supported
options in order of preference are:

*{{EX: DLDBM_USE_DBBTREE}}

.This option enables the Berkeley DB package btree database as the
LDBM backend. You can get this package from:
{{URL: ftp://ftp.cs.berkeley.edu/ucb/4bsd/db.tar.Z}}

*{{EX: DLDBM_USE_DBHASH}}

.This option enables the Berkeley DB package hash database as the
LDBM backend. You can get this package from
{{URL ftp://ftp.cs.berkeley.edu/ucb/4bsd/db.tar.Z}}

*{{EX: DLDBM_USE_GDBM}}

.This option enables GNU dbm as the LDBM backend. You can get this
package from
{{URL: ftp://prep.ai.mit.edu/pub/gnu/gdbm-1.7.3.tar.gz}}

*{{EX: DLDBM_USE_NDBM}}

.This option enables the standard UNIX ndbm(3) package as the
LDBM backend. This package should come standard on your UNIX
system. man ndbm for details.

Example to enable the Berkeley DB Btree backend:

E: LDBMBACKEND= -DLDBM_USE_DBBTREE

The default is -DLDBM_USE_NDBM, since it is the only one available
on all UNIX systems. NDBM has some serious limitations, though (not
thread-safe, severe size limits), and you are strongly encouraged to
use one of the other packages if you can.

Note[label='Note to Solaris users: '] If you are running under Solaris 2.x
and linking in an external database package (e.g., db or gdbm) it is
very important that you compile the package with the {{EX: D_REENTRANT}}
flag. If you do not, bad things will happen.

If you are using version 1.85 or earlier of the Berkeley db package, you
will need to apply the patch found in build/db.1.85.patch to the db
source before compiling it. You can do this with a command like this
from the db source area:

E: patch -p < ldap-source-directory/build/db.1.85.patch

H4: LDBMLIB

This option should only be defined if you have enabled the LDBM
backend as described above, and the necessary library for the
LDBMBACKEND option you chose above is not part of the standard C
library (i.e., anything other than NDBM). This option specifies the library
to link containing the package you selected, and optionally, its location.

Example to link with {{EX: libdb.a}}, contained in {{EX: /usr/local/lib}}:

E: LDBMLIB= -L/usr/local/lib -ldb

H4: THREADS

This option is normally set automatically in the {{EX: Make-platform}} file,
based on the platform on which you are building. You do not normally
need to set it. If you want to use a non-default threads package, you
can specify the appropriate {{EX: -Ddefine}} to enable it here.

H4: THREADSLIB

This option is normally set automatically in the {{EX: Make-platform}} file,
based on the platform on which you are building. You do not normally
need to set it. If you have set {{EX: THREADS}} to a non-default threads
package as described above, you can specify the appropriate
{{EX: -Ldirectory}} flag and  {{EX: -llibname}} flag needed to link
the package here.

H4: PHONETIC

This option controls the phonetic algorithm used by {{I: slapd}} when doing
approximate searches. The default is to use the metaphone algorithm.
You can have {{I: slapd}} use the soundex algorithm by setting this variable
to  {{EX: -DSOUNDEX}}.


H3: Editing the {{EX: include/ldapconfig.h}} file

In addition to setting the {{EX: LDAPHOST}} and {{EX: DEFAULT_BASE}} defines
near the top of this file, there are some slapd-specific defines near the
bottom of the file you may want to change. The defaults should be just
fine, unless you have special needs.

H4: SLAPD_DEFAULT_CONFIGFILE

This define sets the location of the default slapd configuration file.
Normally, it is set to {{EX: $(ETCDIR)/slapd.conf}}, where 
{{EX: ETCDIR}} comes from Make-common.

H4: SLAPD_DEFAULT_SIZELIMIT

This define sets the default size limit on the number of entries returned
from a search. This option is configurable via the tailor file, but if you
want to change the default, do it here.

H4: SLAPD_DEFAULT_TIMELIMIT

This define sets the default time limit for a search. This option is
configurable via the tailor file, but if you want to change the default, do it
here.

H4: SLAPD_PIDFILE

This define sets the location of the file to which slapd will write its
process ID when it starts up.

H4: SLAPD_ARGSFILE

This define sets the location of the file to which slapd will write its
argument vector when it starts up.

H4: SLAPD_MONITOR_DN

This define sets the distinguished name used to retrieve monitoring
information from {{I: slapd}}. See section 7 for more details.

H4: SLAPD_LDBM_MIN_MAXIDS

This define is only relevant to the LDBM backend. It sets the minimum
number of entry IDs that an index entry will contain before it becomes
an allIDs entry. See Section 9.1 for more details.



H2: Making the Software

Once you have edited the {{EX: include/ldapconfig.h.edit}} file and the
Make-common file (see the top level {{EX: README}} file in the distribution),
you are ready to make the software. From the top level LDAP source
directory, type

E: make

You should examine the output of this command carefully to make sure
everything is built correctly. Note that this command builds the LDAP
libraries and associated clients as well as slapd and slurpd.

Note that the LDAP distribution can support making for multiple
platforms from a single source tree. If you want to do this, consult the
{{EX: INSTALL}} file in the top level distribution directory.



H2: Installing the Software

Once the software has been properly configured and successfully
made, you are ready to install it. You will need to have write permission
to the installation directories you specified in the {{EX: Make-common}} file.
Typically, the installation is done as root. From the top level LDAP
source directory, type

E: make install

You should examine the output of this command carefully to make sure
everything is installed correctly. Slapd, slurpd, and their configuration
files, {{EX: slapd.conf}}, {{EX: slapd.at.conf}}, and {{EX: slapd.oc.conf}}
 will be installed in the {{EX: ETCDIR}} directory you specified 
in the {{EX: Make-common}} file.

This command will install the entire LDAP distribution. If you only want
to install slapd and slurpd, you could do something like this:

E: (cd servers/slapd; make install)

E: (cd servers/slurpd; make install)

Note: The installation process installs configuration files as well as
binaries. Existing configuration files are first moved to a name with a
dash '-' appended, e.g., {{EX: slapd.conf}} is moved to {{EX: slapd.conf-}}. 
If you install things twice, however, you can lose your existing configuration
files.