LDAPEXT Working Group J. Sermersheim Internet Draft Novell, Inc Document: draft-ietf-ldapext-ldapv3-dupent-03.txt March 2000 Category: Proposed Standard LDAP Control for a Duplicate Entry Representation of Search Results 1. Status of this Memo This document is an Internet-Draft and is in full conformance with all provisions of Section 10 of RFC2026 [1]. Internet-Drafts are working documents of the Internet Engineering Task Force (IETF), its areas, and its working groups. Note that other groups may also distribute working documents as Internet- Drafts. Internet-Drafts are draft documents valid for a maximum of six months and may be updated, replaced, or obsoleted by other documents at any time. It is inappropriate to use Internet- Drafts as reference material or to cite them other than as "work in progress." The list of current Internet-Drafts can be accessed at http://www.ietf.org/ietf/1id-abstracts.txt The list of Internet-Draft Shadow Directories can be accessed at http://www.ietf.org/shadow.html. 2. Abstract This document describes a Duplicate Entry Representation control extension for the LDAP Search operation. By using the control with an LDAP search, a client requests that the server return separate entries for each value held in the specified attributes. For instance, if a specified attribute of an entry holds multiple values, the search operation will return multiple instances of that entry, each instance holding a separate single value in that attribute. 3. Overview The Server-Side Sorting control [SSS] allows the server to order search result entries based on attribute values (sort keys). It does not allow one to specify behavior when an attribute contains multiple values. The default behavior, as outlined in 7.9 of [X.511], is to use the smallest value as the sort key. An application may need to produce an ordered list of entries, sorted by a multi-valued attribute, where each attribute value is represented in the list. In order to do this, a separate control is needed which causes the set of entries to be expanded sufficiently to represent each attribute value prior to sorting. Sermersheim Standards Track - Expires Sep 2000 Page 1 LDAP Control for a Duplicate Entry Representation of Search Results This document describes controls, which allow duplicate entries in the result set of search, where each entry represents a distinct value of a given multiple valued attribute. An example of this would be a sorted list of all telephone numbers in an organization. Because any entry may have multiple telephone numbers, and the list is to be sorted by telephone number, the list must be able to contain duplicate entries, each with its own unique telephone number. Another example would be an application that needs to display an ordered list of all members of a group. It would use this control to create a result set of duplicate groupOfNames entries, each with a single, unique value in its member attribute. The key words "MUST", "SHOULD", and "MAY" used in this document carry the meanings described in [Bradner97]. 4. The Controls Support for the controls is advertised by the presence of their OID in the supportedControl attribute of a server's root DSE. The OID for the request control is "2.16.840.1.113719.1.27.101.1" and the OID for the response control is "2.16.840.1.113719.1.27.101.2". 4.1 Request Control This control is included in the searchRequest message as part of the controls field of the LDAPMessage, as defined in Section 4.1.12 of [LDAPv3]. The controlType is set to "2.16.840.1.113719.1.27.101.1". The criticality MAY be set to either TRUE or FALSE. The controlValue is an OCTET STRING, whose value is the BER encoding of the following type: DuplicateEntryRequest ::= AttributeDescriptionList The "AttributeDescriptionList" data type is described in 4.1.5 of [LDAPv3] and describes a list of 0 or more AttributeDescription types as also described in 4.1.5 of [LDAPv3]. Both definitions are repeated here for convenience: AttributeDescriptionList ::= SEQUENCE OF AttributeDescription AttributeDescription ::= [ ";" ] While processing a search request, a server implementation examines this list. If a specified attribute exists in an entry to be returned by search, one instance of that entry per attribute value is returned. In this case, the specified attribute in each entry Sermersheim Standards Track - Expires Sep 2000 Page 2 LDAP Control for a Duplicate Entry Representation of Search Results holds a single, unique value from the original set of values of that attribute. An AttributeDescription should only occur once in the list. If an AttributeDescription is included in the DuplicateEntryRequest multiple times, the server should return an unwillingToPerform error in the DuplicateEntryResponse. When two or more attribute types are specified by this control, the number of duplicate entries is the combination of all values in each attribute. Because of the potential complexity involved in servicing multiple attribute types, server implementations MAY choose to support a limited number of attribute types in the control. There is a special case where either no attributes are specified, or an attribute description value of "*" is specified. In this case, all attributes are used. (The "*" allows the client to request all user attributes in addition to specific operational attributes). 4.2 Response Control This control is included in the searchResultDone message as part of the controls field of the LDAPMessage, as defined in Section 4.1.12 of [LDAPv3]. The controlType is set to "2.16.840.1.113719.1.27.101.2". The criticality is FALSE (MAY be absent). The controlValue is an OCTET STRING, whose value is the BER encoding of the following SEQUENCE: DuplicateEntryResponse ::= SEQUENCE { result ENUMERATED { success (0), operations error (1), -- server internal failure timeLimitExceeded (3), -- time limit reached before -- attribute values could be -- processed sizeLimitExceeded (4), -- size limit reached as a -- result of this control adminLimitExceeded (11), -- result set too large for -- server to handle noSuchAttribute (16), -- unrecognized attribute -- description busy (51), unwillingToPerform (53), other (80) }, attributeType AttributeDescription OPTIONAL } A result field is provided here to allow feedback in the case where the criticality of the request control is FALSE, and the server could not process the control - yet it could complete the search operation successfully. If the request control's criticality is TRUE, and the server cannot process the control, the resultCode of the LDAPResult is used to report the error. Sermersheim Standards Track - Expires Sep 2000 Page 3 LDAP Control for a Duplicate Entry Representation of Search Results attributeType MAY be set to the value of the first attribute type specified by the DuplicateEntryRequest that was in error. The client MUST ignore the attributeType field if the result is success. 5. Protocol Examples 5.1 Simple example This example will show this control being used to produce a list of all telephone numbers in the "Acting" organizational unit of "Looney Tunes". Let's say the following three entries exist in this organization; dn: cn=Bugs Bunny,ou=Acting,o=Looney Tunes telephoneNumber: 555-0123 dn: cn=Daffy Duck,ou=Acting,o=Looney Tunes telephoneNumber: 555-8854 telephoneNumber: 555-4588 telephoneNumber: 555-5884 dn: cn=Porky Pig,ou=Acting,o=Looney Tunes telephoneNumber: 555-9425 telephoneNumber: 555-7992 First an LDAP search is specified with a baseDN of "ou=Acting, o=Looney Tunes ", subtree scope, filter set to "telephoneNumber=*". A DuplicateEntryRequest control is attached to the search, specifying "telephoneNumber" as the attribute description, and the search request is sent to the server. The set of search results returned by the server would then consist of the following entries: dn: cn=Bugs Bunny,ou=Acting,o=Looney Tunes telephoneNumber: 555-0123 dn: cn=Daffy Duck,ou=Acting,o=Looney Tunes telephoneNumber: 555-8854 dn: cn=Daffy Duck,ou=Acting,o=Looney Tunes telephoneNumber: 555-4588 dn: cn=Daffy Duck,ou=Acting,o=Looney Tunes telephoneNumber: 555-5884 dn: cn=Porky Pig,ou=Acting,o=Looney Tunes telephoneNumber: 555-9425 dn: cn=Porky Pig,ou=Acting,o=Looney Tunes telephoneNumber: 555-7992 Sermersheim Standards Track - Expires Sep 2000 Page 4 LDAP Control for a Duplicate Entry Representation of Search Results Note that it is not necessary to use an attribute type in this control that is specified in the search filter. This example only does so, because the result was to obtain a list of telephone numbers. 5.2 Specifying multiple attributes A more complicated example involving multiple attributes will result in more entries. If we assume these entries in the directory: dn: cn=Bugs Bunny,ou=Acting,o=Looney Tunes givenName: Bugs mail: bbunny@looneytunes.com dn: cn=Elmer Fudd,ou=Acting,o=Looney Tunes givenName: Elmer givenName: Doc mail: efudd@looneytunes.com mail: bunnyhunter@nra.org And both "mail" and "givenName" are specified as attribute types in this control, the resulting set of entries would be this: dn: cn=Bugs Bunny,ou=Acting,o=Looney Tunes givenName: Bugs mail: bbunny@looneytunes.com dn: cn=Elmer Fudd,ou=Acting,o=Looney Tunes givenName: Elmer mail: efudd@looneytunes.com dn: cn=Elmer Fudd,ou=Acting,o=Looney Tunes givenName: Elmer mail: bunnyhunter@nra.org dn: cn=Elmer Fudd,ou=Acting,o=Looney Tunes givenName: Doc mail: efudd@looneytunes.com dn: cn=Elmer Fudd,ou=Acting,o=Looney Tunes givenName: Doc mail: bunnyhunter@nra.org 5.3 Listing the members of a groupOfNames This example shows how the controls can be used to turn a single groupOfNames entry into multiple duplicate entries. LetĘs say this is our groupOfNames entry: dn: cn=Administrators,o=acme cn: Administrators member: cn=aBaker,o=acme member: cn=cDavis,o=acme Sermersheim Standards Track - Expires Sep 2000 Page 5 LDAP Control for a Duplicate Entry Representation of Search Results member: cn=bChilds,o=acme member: cn=dEvans,o=acme We could set our search base to "cn=Administrators,o=acme", filter to "objectClass=*", use an object scope (to restrict it to this entry) and send the duplicateEntryRequest control with "member" as its attribute value. The resulting set would look like this: dn: cn=Administrators,o=acme member: cn=aBaker,o=acme dn: cn=Administrators,o=acme member: cn=cDavis,o=acme dn: cn=Administrators,o=acme member: cn=bChilds,o=acme dn: cn=Administrators,o=acme member: cn=dEvans,o=acme This list can then be sorted by member and displayed (also by member) in a list. 6 Relationship to other controls This control is intended (but not limited) to be used with the Server Side Sorting control [SSS]. By pairing this control with the Server Side Sorting control, One can produce a set of entries, sorted by attribute values, where each attribute value is represented in the sorted set. Server implementations should ensure that this control is processed before sorting the result of a search, as this control alters the result set of search. This control may also be used with the Virtual List View [VLV] control (which has a dependency on the Server Side Sort control). The nature of the dependency between the VLV control and the Sort control is such that the Sorting takes place first. Because the sort happens first, and because this control is processed before the sort control, the impact of this control on the VLV control is minimal. Some server implementations may need to carefully consider how to handle the typedown functionality of the VLV control when paired with this control. The details of this are heavily implementation dependent and are beyond the scope of this document. 7. Notes for Implementers Both client and server implementations should be aware that using this control could potentially result in a very large set of search results. Servers MAY return an adminLimitExceeded result in the response control due to inordinate consumption of resources. This may be due to some a priori knowledge such as a server restriction of the number of attribute types in the request control that it's Sermersheim Standards Track - Expires Sep 2000 Page 6 LDAP Control for a Duplicate Entry Representation of Search Results willing to service, or it may be due to the server attempting to service the control and running out of resources. Client implementations must be aware that search entries returned, when using this control will contain a subset of the values of any specified attribute. 8. Acknowledgments The author gratefully thanks the input and support of participants of the LDAP-EXT working group. 9. References [LDAPv3] Wahl, M, S. Kille and T. Howes, "Lightweight Directory Access Protocol (v3)", Internet Standard, December, 1997. Available as RFC2251. [SSS] Wahl, M, A. Herron and T. Howes, "LDAP Control Extension for Server Side Sorting of Search Results", Internet Draft, March, 1998. Available as draft-ietf-ldapext-sorting-02.txt. [VLV] Boreham, D, Sermersheim, J, Anantha, A, Armijo, M, "LDAP Extensions for Scrolling View Browsing of Search Results", Internet Draft, June, 1999. Available as draft-ietf-ldapext-ldapv3-vlv-03.txt. [X.511] ITU-T Rec. X.511, "The Directory: Abstract Service Definition", 1993. [Bradner97] Bradner, Scott, "Key Words for use in RFCs to Indicate Requirement Levels", Internet Draft, March, 1997. Available as RFC2119. 10. Author's Address Jim Sermersheim Novell, Inc. 122 East 1700 South Provo, Utah 84606, USA jimse@novell.com +1 801 861-3088 Sermersheim Standards Track - Expires Sep 2000 Page 7