# $OpenLDAP$ # Copyright 2003-2005, The OpenLDAP Foundation, All Rights Reserved. # COPYING RESTRICTIONS APPLY, see COPYRIGHT. H1: LDAP Sync Replication The LDAP Sync replication engine, syncrepl for short, is a consumer-side replication engine that enables the consumer LDAP server to maintain a shadow copy of a DIT fragment. A syncrepl engine resides at the consumer-side as one of the {{slapd}} (8) threads. It creates and maintains a consumer replica by connecting to the replication provider to perform the initial DIT content load followed either by periodic content polling or by timely updates upon content changes. Syncrepl uses the LDAP Content Synchronization (or LDAP Sync for short) protocol as the replica synchronization protocol. It provides a stateful replication which supports both pull-based and push-based synchronization and does not mandate the use of a history store. Syncrepl keeps track of the status of the replication content by maintaining and exchanging synchronization cookies. Because the syncrepl consumer and provider maintain their content status, the consumer can poll the provider content to perform incremental synchronization by asking for the entries required to make the consumer replica up-to-date with the provider content. Syncrepl also enables convenient management of replicas by maintaining replica status. The consumer replica can be constructed from a consumer-side or a provider-side backup at any synchronization status. Syncrepl can automatically resynchronize the consumer replica up-to-date with the current provider content. Syncrepl supports both pull-based and push-based synchronization. In its basic refreshOnly synchronization mode, the provider uses pull-based synchronization where the consumer servers need not be tracked and no history information is maintained. The information required for the provider to process periodic polling requests is contained in the synchronization cookie of the request itself. To optimize the pull-based synchronization, syncrepl utilizes the present phase of the LDAP Sync protocol as well as its delete phase, instead of falling back on frequent full reloads. To further optimize the pull-based synchronization, the provider can maintain a per-scope session log as a history store. In its refreshAndPersist mode of synchronization, the provider uses a push-based synchronization. The provider keeps track of the consumer servers that have requested a persistent search and sends them necessary updates as the provider replication content gets modified. With syncrepl, a consumer server can create a replica without changing the provider's configurations and without restarting the provider server, if the consumer server has appropriate access privileges for the DIT fragment to be replicated. The consumer server can stop the replication also without the need for provider-side changes and restart. Syncrepl supports both partial and sparse replications. The shadow DIT fragment is defined by a general search criteria consisting of base, scope, filter, and attribute list. The replica content is also subject to the access privileges of the bind identity of the syncrepl replication connection. H2: The LDAP Content Synchronization Protocol The LDAP Sync protocol allows a client to maintain a synchronized copy of a DIT fragment. The LDAP Sync operation is defined as a set of controls and other protocol elements which extend the LDAP search operation. This section introduces the LDAP Content Sync protocol only briefly. For more information, refer to the Internet Draft {{The LDAP Content Synchronization Operation }}. The LDAP Sync protocol supports both polling and listening for changes by defining two respective synchronization operations: {{refreshOnly}} and {{refreshAndPersist}}. Polling is implemented by the {{refreshOnly}} operation. The client copy is synchronized to the server copy at the time of polling. The server finishes the search operation by returning {{SearchResultDone}} at the end of the search operation as in the normal search. The listening is implemented by the {{refreshAndPersist}} operation. Instead of finishing the search after returning all entries currently matching the search criteria, the synchronization search remains persistent in the server. Subsequent updates to the synchronization content in the server cause additional entry updates to be sent to the client. The {{refreshOnly}} operation and the refresh stage of the {{refreshAndPersist}} operation can be performed with a present phase or a delete phase. In the present phase, the server sends the client the entries updated within the search scope since the last synchronization. The server sends all requested attributes, be it changed or not, of the updated entries. For each unchanged entry which remains in the scope, the server sends a present message consisting only of the name of the entry and the synchronization control representing state present. The present message does not contain any attributes of the entry. After the client receives all update and present entries, it can reliably determine the new client copy by adding the entries added to the server, by replacing the entries modified at the server, and by deleting entries in the client copy which have not been updated nor specified as being present at the server. The transmission of the updated entries in the delete phase is the same as in the present phase. The server sends all the requested attributes of the entries updated within the search scope since the last synchronization to the client. In the delete phase, however, the server sends a delete message for each entry deleted from the search scope, instead of sending present messages. The delete message consists only of the name of the entry and the synchronization control representing state delete. The new client copy can be determined by adding, modifying, and removing entries according to the synchronization control attached to the {{SearchResultEntry}} message. In the case that the LDAP Sync server maintains a history store and can determine which entries are scoped out of the client copy since the last synchronization time, the server can use the delete phase. If the server does not maintain any history store, cannot determine the scoped-out entries from the history store, or the history store does not cover the outdated synchronization state of the client, the server should use the present phase. The use of the present phase is much more efficient than a full content reload in terms of the synchronization traffic. To reduce the synchronization traffic further, the LDAP Sync protocol also provides several optimizations such as the transmission of the normalized {{EX:entryUUID}}s and the transmission of multiple {{EX:entryUUIDs}} in a single {{syncIdSet}} message. At the end of the {{refreshOnly}} synchronization, the server sends a synchronization cookie to the client as a state indicator of the client copy after the synchronization is completed. The client will present the received cookie when it requests the next incremental synchronization to the server. When {{refreshAndPersist}} synchronization is used, the server sends a synchronization cookie at the end of the refresh stage by sending a Sync Info message with TRUE refreshDone. It also sends a synchronization cookie by attaching it to {{SearchResultEntry}} generated in the persist stage of the synchronization search. During the persist stage, the server can also send a Sync Info message containing the synchronization cookie at any time the server wants to update the client-side state indicator. The server also updates a synchronization indicator of the client at the end of the persist stage. In the LDAP Sync protocol, entries are uniquely identified by the {{EX:entryUUID}} attribute value. It can function as a reliable identifier of the entry. The DN of the entry, on the other hand, can be changed over time and hence cannot be considered as the reliable identifier. The {{EX:entryUUID}} is attached to each {{SearchResultEntry}} or {{SearchResultReference}} as a part of the synchronization control. H2: Syncrepl Details The syncrepl engine utilizes both the {{refreshOnly}} and the {{refreshAndPersist}} operations of the LDAP Sync protocol. If a syncrepl specification is included in a database definition, {{slapd}} (8) launches a syncrepl engine as a {{slapd}} (8) thread and schedules its execution. If the {{refreshOnly}} operation is specified, the syncrepl engine will be rescheduled at the interval time after a synchronization operation is completed. If the {{refreshAndPersist}} operation is specified, the engine will remain active and process the persistent synchronization messages from the provider. The syncrepl engine utilizes both the present phase and the delete phase of the refresh synchronization. It is possible to configure a per-scope session log in the provider server which stores the {{EX:entryUUID}}s of a finite number of entries deleted from a replication content. Multiple replicas of single provider content share the same per-scope session log. The syncrepl engine uses the delete phase if the session log is present and the state of the consumer server is recent enough that no session log entries are truncated after the last synchronization of the client. The syncrepl engine uses the present phase if no session log is configured for the replication content or if the consumer replica is too outdated to be covered by the session log. The current design of the session log store is memory based, so the information contained in the session log is not persistent over multiple provider invocations. It is not currently supported to access the session log store by using LDAP operations. It is also not currently supported to impose access control to the session log. As a further optimization, even in the case the synchronization search is not associated with any session log, no entries will be transmitted to the consumer server when there has been no update in the replication context. The syncrepl engine, which is a consumer-side replication engine, can work with any backends. The LDAP Sync provider can be configured as an overlay on any backend, but works best with the {{back-bdb}} or {{back-hdb}} backend. The provider can not support refreshAndPersist mode on {{back-ldbm}} due to limits in that backend's locking architecture. The LDAP Sync provider maintains a {{EX:contextCSN}} for each database as the current synchronization state indicator of the provider content. It is the largest {{EX:entryCSN}} in the provider context such that no transactions for an entry having smaller {{EX:entryCSN}} value remains outstanding. The {{EX:contextCSN}} could not just be set to the largest issued {{EX:entryCSN}} because {{EX:entryCSN}} is obtained before a transaction starts and transactions are not committed in the issue order. The provider stores the {{EX:contextCSN}} of a context in the {{EX:contextCSN}} attribute of the context suffix entry. The attribute is not written to the database after every update operation though; instead it is maintained primarily in memory. At database start time the provider reads the last saved {{EX:contextCSN}} into memory and uses the in-memory copy exclusively thereafter. By default, changes to the {{EX:contextCSN}} as a result of database updates will not be written to the database until the server is cleanly shut down. A checkpoint facility exists to cause the contextCSN to be written out more frequently if desired. Note that at startup time, if the provider is unable to read a {{EX:contextCSN}} from the suffix entry, it will scan the entire database to determine the value, and this scan may take quite a long time on a large database. When a {{EX:contextCSN}} value is read, the database will still be scanned for any {{EX:entryCSN}} values greater than it, to make sure the {{EX:contextCSN}} value truly reflects the greatest committed {{EX:entryCSN}} in the database. On databases which support inequality indexing, setting an eq index on the {{EX:entryCSN}} attribute and configuring {{contextCSN}} checkpoints will greatly speed up this scanning step. If no {{EX:contextCSN}} can be determined by reading and scanning the database, a new value will be generated. Also, if scanning the database yielded a greater {{EX:entryCSN}} than was previously recorded in the suffix entry's {{EX:contextCSN}} attribute, a checkpoint will be immediately written with the new value. The consumer also stores its replica state, which is the provider's {{EX:contextCSN}} received as a synchronization cookie, in the {{EX:contextCSN}} attribute of the suffix entry. The replica state maintained by a consumer server is used as the synchronization state indicator when it performs subsequent incremental synchronization with the provider server. It is also used as a provider-side synchronization state indicator when it functions as a secondary provider server in a cascading replication configuration. Since the consumer and provider state information are maintained in the same location within their respective databases, any consumer can be promoted to a provider (and vice versa) without any special actions. Because a general search filter can be used in the syncrepl specification, some entries in the context may be omitted from the synchronization content. The syncrepl engine creates a glue entry to fill in the holes in the replica context if any part of the replica content is subordinate to the holes. The glue entries will not be returned in the search result unless {{ManageDsaIT}} control is provided. Also as a consequence of the search filter used in the syncrepl specification, it is possible for a modification to remove an entry from the replication scope even though the entry has not been deleted on the provider. Logically the entry must be deleted on the consumer but in {{refreshOnly}} mode the provider cannot detect and propagate this change without the use of the session log. H2: Configuring Syncrepl Because syncrepl is a consumer-side replication engine, the syncrepl specification is defined in {{slapd.conf}} (5) of the consumer server, not in the provider server's configuration file. The initial loading of the replica content can be performed either by starting the syncrepl engine with no synchronization cookie or by populating the consumer replica by adding an {{TERM:LDIF}} file dumped as a backup at the provider. When loading from a backup, it is not required to perform the initial loading from the up-to-date backup of the provider content. The syncrepl engine will automatically synchronize the initial consumer replica to the current provider content. As a result, it is not required to stop the provider server in order to avoid the replica inconsistency caused by the updates to the provider content during the content backup and loading process. When replicating a large scale directory, especially in a bandwidth constrained environment, it is advised to load the consumer replica from a backup instead of performing a full initial load using syncrepl. H3: Set up the provider slapd The provider is implemented as an overlay, so the overlay itself must first be configured in {{slapd.conf}} (5) before it can be used. The provider has only two configuration directives, for setting checkpoints on the {{EX:contextCSN}} and for configuring the session log. Because the LDAP Sync search is subject to access control, proper access control privileges should be set up for the replicated content. The {{EX:contextCSN}} checkpoint is configured by the > syncprov-checkpoint directive. Checkpoints are only tested after successful write operations. If {{}} operations or more than {{}} time has passed since the last checkpoint, a new checkpoint is performed. The session log is configured by the > syncprov-sessionlog directive, where {{}} is the maximum number of session log entries the session log can record. When a session log is configured, it is automatically used for all LDAP Sync searches within the database. Note that using the session log requires searching on the {{entryUUID}} attribute. Setting an eq index on this attribute will greatly benefit the performance of the session log on the provider. A more complete example of the {{slapd.conf}} content is thus: > database bdb > suffix dc=Example,dc=com > rootdn dc=Example,dc=com > directory /var/ldap/db > index objectclass,entryCSN,entryUUID eq > > overlay syncprov > syncprov-checkpoint 100 10 > syncprov-sessionlog 100 H3: Set up the consumer slapd The syncrepl replication is specified in the database section of {{slapd.conf}} (5) for the replica context. The syncrepl engine is backend independent and the directive can be defined with any database type. > database hdb > suffix dc=Example,dc=com > rootdn dc=Example,dc=com > directory /var/ldap/db > index objectclass,entryCSN,entryUUID eq > > syncrepl rid=123 > provider=ldap://provider.example.com:389 > type=refreshOnly > interval=01:00:00:00 > searchbase="dc=example,dc=com" > filter="(objectClass=organizationalPerson)" > scope=sub > attrs="cn,sn,ou,telephoneNumber,title,l" > schemachecking=off > bindmethod=simple > binddn="cn=syncuser,dc=example,dc=com" > credentials=secret In this example, the consumer will connect to the provider slapd at port 389 of {{FILE:ldap://provider.example.com}} to perform a polling ({{refreshOnly}}) mode of synchronization once a day. It will bind as {{EX:cn=syncuser,dc=example,dc=com}} using simple authentication with password "secret". Note that the access control privilege of {{EX:cn=syncuser,dc=example,dc=com}} should be set appropriately in the provider to retrieve the desired replication content. Also the search limits must be high enough on the provider to allow the syncuser to retrieve a complete copy of the requested content. The consumer uses the rootdn to write to its database so it always has full permissions to write all content. The synchronization search in the above example will search for the entries whose objectClass is organizationalPerson in the entire subtree rooted at {{EX:dc=example,dc=com}}. The requested attributes are {{EX:cn}}, {{EX:sn}}, {{EX:ou}}, {{EX:telephoneNumber}}, {{EX:title}}, and {{EX:l}}. The schema checking is turned off, so that the consumer {{slapd}} (8) will not enforce entry schema checking when it process updates from the provider {{slapd}} (8). For more detailed information on the syncrepl directive, see the {{SECT:syncrepl}} section of {{SECT:The slapd Configuration File}} chapter of this admin guide. H3: Start the provider and the consumer slapd The provider {{slapd}} (8) is not required to be restarted. {{contextCSN}} is automatically generated as needed: it might be originally contained in the {{TERM:LDIF}} file, generated by {{slapadd}} (8), generated upon changes in the context, or generated when the first LDAP Sync search arrives at the provider. If an LDIF file is being loaded which did not previously contain the {{contextCSN}}, the {{-w}} option should be used with {{slapadd}} (8) to cause it to be generated. This will allow the server to startup a little quicker the first time it runs. When starting a consumer {{slapd}} (8), it is possible to provide a synchronization cookie as the {{-c cookie}} command line option in order to start the synchronization from a specific state. The cookie is a comma separated list of name=value pairs. Currently supported syncrepl cookie fields are {{csn=}} and {{rid=}}. {{}} represents the current synchronization state of the consumer replica. {{}} identifies a consumer replica locally within the consumer server. It is used to relate the cookie to the syncrepl definition in {{slapd.conf}} (5) which has the matching replica identifier. The {{}} must have no more than 3 decimal digits. The command line cookie overrides the synchronization cookie stored in the consumer replica database.