.TH SLAPO-ACCESSLOG 5 "RELEASEDATE" "OpenLDAP LDVERSION" .\" Copyright 2005-2020 The OpenLDAP Foundation All Rights Reserved. .\" Copying restrictions apply. See COPYRIGHT/LICENSE. .\" $OpenLDAP$ .SH NAME slapo\-accesslog \- Access Logging overlay to slapd .SH SYNOPSIS ETCDIR/slapd.conf .SH DESCRIPTION The Access Logging overlay can be used to record all accesses to a given backend database on another database. This allows all of the activity on a given database to be reviewed using arbitrary LDAP queries, instead of just logging to local flat text files. Configuration options are available for selecting a subset of operation types to log, and to automatically prune older log records from the logging database. Log records are stored with audit schema (see below) to assure their readability whether viewed as LDIF or in raw form. .SH CONFIGURATION These .B slapd.conf options apply to the Access Logging overlay. They should appear after the .B overlay directive. .TP .B logdb Specify the suffix of a database to be used for storing the log records. The specified database must be defined elsewhere in the configuration. The access controls on the log database should prevent general access. The suffix entry of the log database will be created automatically by this overlay. The log entries will be generated as the immediate children of the suffix entry. .TP .B logops Specify which types of operations to log. The valid operation types are abandon, add, bind, compare, delete, extended, modify, modrdn, search, and unbind. Aliases for common sets of operations are also available: .RS .TP .B writes add, delete, modify, modrdn .TP .B reads compare, search .TP .B session abandon, bind, unbind .TP .B all all operations .RE .TP .B logbase Specify a set of operations that will only be logged if they occur under a specific subtree of the database. The operation types are as above for the .B logops setting, and delimited by a '|' character. .TP .B logold Specify a filter for matching against Deleted and Modified entries. If the entry matches the filter, the old contents of the entry will be logged along with the current request. .TP .B logoldattr ... Specify a list of attributes whose old contents are always logged in Modify and ModRDN requests. Usually only the contents of attributes that were actually modified will be logged; by default no old attributes are logged for ModRDN requests. .TP .B logpurge Specify the maximum age for log entries to be retained in the database, and how often to scan the database for old entries. Both the .B age and .B interval are specified as a time span in days, hours, minutes, and seconds. The time format is [ddd+]hh:mm[:ss] i.e., the days and seconds components are optional but hours and minutes are required. Except for days, which can be up to 5 digits, each numeric field must be exactly two digits. For example .RS .RS .PD 0 .TP logpurge 2+00:00 1+00:00 .RE .PD would specify that the log database should be scanned every day for old entries, and entries older than two days should be deleted. When using a log database that supports ordered indexing on generalizedTime attributes, specifying an eq index on the .B reqStart attribute will greatly benefit the performance of the purge operation. .RE .TP .B logsuccess TRUE | FALSE If set to TRUE then log records will only be generated for successful requests, i.e., requests that produce a result code of 0 (LDAP_SUCCESS). If FALSE, log records are generated for all requests whether they succeed or not. The default is FALSE. .SH EXAMPLES .LP .nf database mdb suffix dc=example,dc=com \... overlay accesslog logdb cn=log logops writes reads logbase search|compare ou=testing,dc=example,dc=com logold (objectclass=person) database mdb suffix cn=log \... index reqStart eq access to * by dn.base="cn=admin,dc=example,dc=com" read .fi .SH SCHEMA The .B accesslog overlay utilizes the "audit" schema described herein. This schema is specifically designed for .B accesslog auditing and is not intended to be used otherwise. It is also noted that the schema described here is .I a work in .IR progress , and hence subject to change without notice. The schema is loaded automatically by the overlay. The schema includes a number of object classes and associated attribute types as described below. There is a basic .B auditObject class from which two additional classes, .B auditReadObject and .B auditWriteObject are derived. Object classes for each type of LDAP operation are further derived from these classes. This object class hierarchy is designed to allow flexible yet efficient searches of the log based on either a specific operation type's class, or on more general classifications. The definition of the .B auditObject class is as follows: .LP .RS 4 ( 1.3.6.1.4.1.4203.666.11.5.2.1 NAME 'auditObject' DESC 'OpenLDAP request auditing' SUP top STRUCTURAL MUST ( reqStart $ reqType $ reqSession ) MAY ( reqDN $ reqAuthzID $ reqControls $ reqRespControls $ reqEnd $ reqResult $ reqMessage $ reqReferral $ reqEntryUUID ) ) .RE .P Note that all of the OIDs used in the logging schema currently reside under the OpenLDAP Experimental branch. It is anticipated that they will migrate to a Standard branch in the future. An overview of the attributes follows: .B reqStart and .B reqEnd provide the start and end time of the operation, respectively. They use generalizedTime syntax. The .B reqStart attribute is also used as the RDN for each log entry. The .B reqType attribute is a simple string containing the type of operation being logged, e.g. .BR add , .BR delete , .BR search , etc. For extended operations, the type also includes the OID of the extended operation, e.g. .B extended(1.1.1.1) The .B reqSession attribute is an implementation-specific identifier that is common to all the operations associated with the same LDAP session. Currently this is slapd's internal connection ID, stored in decimal. The .B reqDN attribute is the distinguishedName of the target of the operation. E.g., for a Bind request, this is the Bind DN. For an Add request, this is the DN of the entry being added. For a Search request, this is the base DN of the search. The .B reqAuthzID attribute is the distinguishedName of the user that performed the operation. This will usually be the same name as was established at the start of a session by a Bind request (if any) but may be altered in various circumstances. The .B reqControls and .B reqRespControls attributes carry any controls sent by the client on the request and returned by the server in the response, respectively. The attribute values are just uninterpreted octet strings. The .B reqResult attribute is the numeric LDAP result code of the operation, indicating either success or a particular LDAP error code. An error code may be accompanied by a text error message which will be recorded in the .B reqMessage attribute. The .B reqReferral attribute carries any referrals that were returned with the result of the request. The .B reqEntryUUID attribute records the entryUUID attribute of the entry operated on, for an Add request, this is the entryUUID of the newly created entry. Operation-specific classes are defined with additional attributes to carry all of the relevant parameters associated with the operation: .LP .RS 4 ( 1.3.6.1.4.1.4203.666.11.5.2.4 NAME 'auditAbandon' DESC 'Abandon operation' SUP auditObject STRUCTURAL MUST reqId ) .RE .P For the .B Abandon operation the .B reqId attribute contains the message ID of the request that was abandoned. .LP .RS 4 ( 1.3.6.1.4.1.4203.666.11.5.2.5 NAME 'auditAdd' DESC 'Add operation' SUP auditWriteObject STRUCTURAL MUST reqMod ) .RE .P The .B Add class inherits from the .B auditWriteObject class. The Add and Modify classes are very similar. The .B reqMod attribute carries all of the attributes of the original entry being added. (Or in the case of a Modify operation, all of the modifications being performed.) The values are formatted as .RS .PD 0 .TP attribute:<+|\-|=|#> [ value] .RE .RE .PD Where '+' indicates an Add of a value, '\-' for Delete, '=' for Replace, and '#' for Increment. In an Add operation, all of the reqMod values will have the '+' designator. .P .LP .RS 4 ( 1.3.6.1.4.1.4203.666.11.5.2.6 NAME 'auditBind' DESC 'Bind operation' SUP auditObject STRUCTURAL MUST ( reqVersion $ reqMethod ) ) .RE .P The .B Bind class includes the .B reqVersion attribute which contains the LDAP protocol version specified in the Bind as well as the .B reqMethod attribute which contains the Bind Method used in the Bind. This will be the string .B SIMPLE for LDAP Simple Binds or .B SASL() for SASL Binds. Note that unless configured as a global overlay, only Simple Binds using DNs that reside in the current database will be logged. .LP .RS 4 ( 1.3.6.1.4.1.4203.666.11.5.2.7 NAME 'auditCompare' DESC 'Compare operation' SUP auditObject STRUCTURAL MUST reqAssertion ) .RE .P For the .B Compare operation the .B reqAssertion attribute carries the Attribute Value Assertion used in the compare request. .LP .RS 4 ( 1.3.6.1.4.1.4203.666.11.5.2.8 NAME 'auditDelete' DESC 'Delete operation' SUP auditWriteObject STRUCTURAL MAY reqOld ) .RE .P The .B Delete operation needs no further parameters. However, the .B reqOld attribute may optionally be used to record the contents of the entry prior to its deletion. The values are formatted as .RS .PD 0 .TP attribute: value .RE .PD The .B reqOld attribute is only populated if the entry being deleted matches the configured .B logold filter. .LP .RS 4 ( 1.3.6.1.4.1.4203.666.11.5.2.9 NAME 'auditModify' DESC 'Modify operation' SUP auditWriteObject STRUCTURAL MAY reqOld MUST reqMod ) .RE .P The .B Modify operation contains a description of modifications in the .B reqMod attribute, which was already described above in the Add operation. It may optionally contain the previous contents of any modified attributes in the .B reqOld attribute, using the same format as described above for the Delete operation. The .B reqOld attribute is only populated if the entry being modified matches the configured .B logold filter. .LP .RS 4 ( 1.3.6.1.4.1.4203.666.11.5.2.10 NAME 'auditModRDN' DESC 'ModRDN operation' SUP auditWriteObject STRUCTURAL MUST ( reqNewRDN $ reqDeleteOldRDN ) MAY ( reqNewSuperior $ reqOld ) ) .RE .P The .B ModRDN class uses the .B reqNewRDN attribute to carry the new RDN of the request. The .B reqDeleteOldRDN attribute is a Boolean value showing .B TRUE if the old RDN was deleted from the entry, or .B FALSE if the old RDN was preserved. The .B reqNewSuperior attribute carries the DN of the new parent entry if the request specified the new parent. The .B reqOld attribute is only populated if the entry being modified matches the configured .B logold filter and contains attributes in the .B logoldattr list. .LP .RS 4 ( 1.3.6.1.4.1.4203.666.11.5.2.11 NAME 'auditSearch' DESC 'Search operation' SUP auditReadObject STRUCTURAL MUST ( reqScope $ reqDerefAliases $ reqAttrsOnly ) MAY ( reqFilter $ reqAttr $ reqEntries $ reqSizeLimit $ reqTimeLimit ) ) .RE .P For the .B Search class the .B reqScope attribute contains the scope of the original search request, using the values specified for the LDAP URL format. I.e. .BR base , .BR one , .BR sub , or .BR subord . The .B reqDerefAliases attribute is one of .BR never , .BR finding , .BR searching , or .BR always , denoting how aliases will be processed during the search. The .B reqAttrsOnly attribute is a Boolean value showing .B TRUE if only attribute names were requested, or .B FALSE if attributes and their values were requested. The .B reqFilter attribute carries the filter used in the search request. The .B reqAttr attribute lists the requested attributes if specific attributes were requested. The .B reqEntries attribute is the integer count of how many entries were returned by this search request. The .B reqSizeLimit and .B reqTimeLimit attributes indicate what limits were requested on the search operation. .LP .RS 4 ( 1.3.6.1.4.1.4203.666.11.5.2.12 NAME 'auditExtended' DESC 'Extended operation' SUP auditObject STRUCTURAL MAY reqData ) .RE .P The .B Extended class represents an LDAP Extended Operation. As noted above, the actual OID of the operation is included in the .B reqType attribute of the parent class. If any optional data was provided with the request, it will be contained in the .B reqData attribute as an uninterpreted octet string. .SH NOTES The Access Log implemented by this overlay may be used for a variety of other tasks, e.g. as a ChangeLog for a replication mechanism, as well as for security/audit logging purposes. .SH FILES .TP ETCDIR/slapd.conf default slapd configuration file .SH SEE ALSO .BR slapd.conf (5), .BR slapd\-config (5). .SH ACKNOWLEDGEMENTS .P This module was written in 2005 by Howard Chu of Symas Corporation.